Re: [Nouveau] Spurious TV load detection on GeForce 6150 (no TV connector)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Apr 13, 2010 at 11:45 AM, Francisco Jerez <currojerez@xxxxxxxxxx> wrote:
> Renato Caldas <seventhguardian@xxxxxxxxx> writes:
>
>> Hello,
>>
>> Since I've updated to F13 I keep getting blank screens at "cold" boot
>> with this card:
>> 00:05.0 VGA compatible controller: nVidia Corporation C51PV [GeForce
>> 6150] (rev a2)
>>
>> When I say "cold" boot I mean the first couple of times I turn on my
>> computer in the morning. After a couple of reboots I get plymouth to
>> show up, and then X11. This never happened with F12.
>>
>> After comparing the logs (--- bad, +++ good), I found these:
>>
>> (...)
>>  input: ImPS/2 Generic Wheel Mouse as
>> /devices/platform/i8042/serio1/input/input4
>> -[drm] nouveau 0000:00:05.0: Load detected on output B
>> -[drm] nouveau 0000:00:05.0: allocated 1280x1024 fb: 0x49000, bo
>> ffff880034ea0cd8
>> +[drm] nouveau 0000:00:05.0: allocated 1280x1024 fb: 0x49000, bo
>> ffff880034ea8cd8
>>  fbcon: nouveaufb (fb0) is primary device
>>  [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on vga encoder (output 0)
>>  [drm] nouveau 0000:00:05.0: Output VGA-1 is running on CRTC 0 using output B
>> -[drm] nouveau 0000:00:05.0: Setting dpms mode 0 on TV encoder (output 2)
>> -[drm] nouveau 0000:00:05.0: Output TV-1 is running on CRTC 1 using output B
>> -Console: switching to colour frame buffer device 90x36
>> +Console: switching to colour frame buffer device 160x64
>>  fb0: nouveaufb frame buffer device
>> (...)
>>  [drm] nouveau 0000:00:05.0: Allocating FIFO number 1
>>  [drm] nouveau 0000:00:05.0: nouveau_channel_alloc: initialised FIFO 1
>> -[drm] nouveau 0000:00:05.0: Setting dpms mode 3 on TV encoder (output 2)
>>  [drm] nouveau 0000:00:05.0: Allocating FIFO number 2
>>  [drm] nouveau 0000:00:05.0: nouveau_channel_alloc: initialised FIFO 2
>> (...)
>>
>> Although this may seem like a hardware quirk (it may be, partially),
>> the fact is that I don't have a TV output, only VGA and DVI. So I
>> guess the driver shouldn't be looking for load on an nonexistent
>> output. This other log line may be relevant (or not):
>>
> Could you provide full kernel logs and the output from "lspci -vvn"?

Sure, everything's attached. Sorry for the gnome/gdm noise filled logs..

Thanks,
  Renato

>> Apr 13 08:35:30 localhost kernel: type=1400 audit(1271144119.830:4):
>> avc:  denied  { mmap_zero } for  pid=462 comm="vbetool"
>> scontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023
>> tcontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tclass=memprotect
>>
>> On the other hand, both CRTC's are using output B. I'm not that
>> familiar with the hardware, and this may be completely wrong, but I
>> assume an output can only be used by a single CRTC.
>>
> Yeah, that's correct.
>
>> Cheers,
>>   Renato
>> _______________________________________________
>> Nouveau mailing list
>> Nouveau@xxxxxxxxxxxxxxxxxxxxx
>> http://lists.freedesktop.org/mailman/listinfo/nouveau
>

Attachment: lspci_output.bz2
Description: BZip2 compressed data

Attachment: messages_bad.bz2
Description: BZip2 compressed data

Attachment: messages_good.bz2
Description: BZip2 compressed data

-- 
test mailing list
test@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe: 
https://admin.fedoraproject.org/mailman/listinfo/test

[Index of Archives]     [Fedora Desktop]     [Fedora SELinux]     [Photo Sharing]     [Yosemite Forum]     [KDE Users]

  Powered by Linux