Ok - my results are not so good.
I'm running 2.6.32 (git from about 2 days ago) and nouveau also from git
(also 2 days ago). My nv card is a 8800gts.
Upgraded from the repo. After restarting X (telinit 3 && telinit 5) I
lost both the X display, and any console access. XDMCP and ssh worked,
so all was not lost.
There were no error messages in any log. Reading logs, everything should
have been fine. The X log showed the screen detected - in fact, the
working log is indistinguishable from the non-working log.
I tried to restore console access by rmmod fbcon & rmmod -f nouveau. The
subsequent modprobe nouveau hung (expected, I suppose). Eventually, I
gave up and rebooted. The console sprung to life when the modprobe
nouveau was killed during the reboot.
When I rebooted, I got a normal login screen. I logged in and got a
desktop - but no toolbars, etc. Just my previously opened terminal
windows. I moved one of them slightly and the screen behind it not fill
in right away.. took about 5 seconds. Then X quit and restarted.
Subsequently, I was unable to log in - X just quit.
I'm attaching the xorg log files with the segfault.
I also see a GPU lockup in dmseg - attaching that as well (this is the
reboot after installation of the new xorg).
Lastly, I'm attaching the old dmesg (pre reboot) for comparison.
I've now downgraded and all is back to normal.
On 12/16/2009 7:15 PM, Adam Williamson wrote:
Hi, everyone. Dave Airlie would like it if people could help us
regression-test the latest xorg-x11-server build for F12, which you'll
be able to find here when it's done building:
http://koji.fedoraproject.org/koji/buildinfo?buildID=147423
We have quite a lot of changes queued up, and we will need to send these
changes out as an update at some point - there's important fixes in
there. But we'd like some reasonable assurance that it doesn't break
anything horribly, obviously. If those of you with F12 machines could
stick this build on and make sure things work alright, that'd be great.
Please report whether it seems OK or you run into problems in this
thread. Thanks!
X.Org X Server 1.7.3
Release Date: 2009-12-3
X Protocol Version 11, Revision 0
Build Operating System: x86-7 2.6.18-164.6.1.el5
Current Operating System: Linux mail.majjas.com 2.6.32-07387-gf3cae36 #5 SMP Mon Dec 14 12:13:51 EST 2009 x86_64
Kernel command line: ro root=/dev/mapper/vg_00-LogVol02_root usbcore.autosuspend=1 crashkernel=128M SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us pcie_aspm=force intel_iommu=igfx_off
Build Date: 17 December 2009 12:08:29AM
Build ID: xorg-x11-server 1.7.3-3.fc12
Current version of pixman: 0.16.2
Before reporting problems, check http://bodhi.fedoraproject.org/
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 17 10:52:21 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins,
catalogue:/etc/X11/fontpath.d,
built-ins
(==) ModulePath set to "/usr/lib64/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x7c8540
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 7
(--) PCI:*(0:2:0:0) 10de:0193:10de:0420 nVidia Corporation G80 [GeForce 8800 GTS] rev 162, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000ac00/128, BIOS @ 0x????????/131072
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "dbe"
(II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dri"
(II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "record"
(II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "glx"
(II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "nouveau"
(II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so
(II) Module nouveau: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 0.0.10
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) NOUVEAU driver
(II) NOUVEAU driver for NVIDIA chipset families :
RIVA TNT (NV04)
RIVA TNT2 (NV05)
GeForce 256 (NV10)
GeForce 2 (NV11, NV15)
GeForce 4MX (NV17, NV18)
GeForce 3 (NV20)
GeForce 4Ti (NV25, NV28)
GeForce FX (NV3x)
GeForce 6 (NV4x)
GeForce 7 (G7x)
GeForce 8 (G8x)
(II) Primary Device is: PCI 02@00:00:0
(--) NOUVEAU(0): Chipset: "NVIDIA NV50"
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib64/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) NOUVEAU(0): Initializing int10
(II) NOUVEAU(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Reloading /usr/lib64/xorg/modules/extensions/libdri.so
(II) NOUVEAU(0): Loaded DRI module
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:02:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:02:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) NOUVEAU(0): [drm] nouveau interface version: 0.0.15
(--) NOUVEAU(0): [drm] kernel modesetting in use
(==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
(==) NOUVEAU(0): RGB weight 888
(==) NOUVEAU(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib64/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(==) NOUVEAU(0): Using HW cursor
(--) NOUVEAU(0): Linear framebuffer at 0xD0000000
(--) NOUVEAU(0): MMIO registers at 0xFA000000
(II) NOUVEAU(0): Output DVI-I-0 using monitor section Monitor0
(II) NOUVEAU(0): Output DVI-I-1 has no monitor section
(II) NOUVEAU(0): EDID for output DVI-I-0
(II) NOUVEAU(0): Manufacturer: SAM Model: 27e Serial#: 1296380466
(II) NOUVEAU(0): Year: 2007 Week: 19
(II) NOUVEAU(0): EDID Version: 1.3
(II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) NOUVEAU(0): Sync: Separate Composite SyncOnGreen
(II) NOUVEAU(0): Max Image Size [cm]: horiz.: 47 vert.: 30
(II) NOUVEAU(0): Gamma: 2.20
(II) NOUVEAU(0): DPMS capabilities: Off; RGB/Color Display
(II) NOUVEAU(0): First detailed timing is preferred mode
(II) NOUVEAU(0): redX: 0.644 redY: 0.333 greenX: 0.286 greenY: 0.603
(II) NOUVEAU(0): blueX: 0.152 blueY: 0.079 whiteX: 0.313 whiteY: 0.329
(II) NOUVEAU(0): Supported established timings:
(II) NOUVEAU(0): 720x400@70Hz
(II) NOUVEAU(0): 640x480@60Hz
(II) NOUVEAU(0): 640x480@67Hz
(II) NOUVEAU(0): 640x480@72Hz
(II) NOUVEAU(0): 640x480@75Hz
(II) NOUVEAU(0): 800x600@56Hz
(II) NOUVEAU(0): 800x600@60Hz
(II) NOUVEAU(0): 800x600@72Hz
(II) NOUVEAU(0): 800x600@75Hz
(II) NOUVEAU(0): 832x624@75Hz
(II) NOUVEAU(0): 1024x768@60Hz
(II) NOUVEAU(0): 1024x768@70Hz
(II) NOUVEAU(0): 1024x768@75Hz
(II) NOUVEAU(0): 1280x1024@75Hz
(II) NOUVEAU(0): 1152x864@75Hz
(II) NOUVEAU(0): Manufacturer's mask: 0
(II) NOUVEAU(0): Supported standard timings:
(II) NOUVEAU(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
(II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) NOUVEAU(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) NOUVEAU(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) NOUVEAU(0): Supported detailed timing:
(II) NOUVEAU(0): clock: 119.0 MHz Image Size: 474 x 296 mm
(II) NOUVEAU(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
(II) NOUVEAU(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
(II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 140 MHz
(II) NOUVEAU(0): Monitor name: SyncMaster
(II) NOUVEAU(0): Serial No: HVCP500694
(II) NOUVEAU(0): EDID (in hex):
(II) NOUVEAU(0): 00ffffffffffff004c2d7e023232454d
(II) NOUVEAU(0): 131101030e2f1e782ad515a455499a27
(II) NOUVEAU(0): 145054bfef80b30081808140714f0101
(II) NOUVEAU(0): 0101010101017c2e90a0601a1e403020
(II) NOUVEAU(0): 3600da281100001a000000fd00384b1e
(II) NOUVEAU(0): 510e000a202020202020000000fc0053
(II) NOUVEAU(0): 796e634d61737465720a2020000000ff
(II) NOUVEAU(0): 00485643503530303639340a202000b5
(II) NOUVEAU(0): EDID vendor "SAM", prod id 638
(II) NOUVEAU(0): EDID quirk: Detailed timing is not preferred, use largest mode at 60Hz
(II) NOUVEAU(0): Using EDID range info for horizontal sync
(II) NOUVEAU(0): Using EDID range info for vertical refresh
(II) NOUVEAU(0): Printing DDC gathered Modelines:
(II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Not using mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) NOUVEAU(0): Printing probed modes for output DVI-I-0
(II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NOUVEAU(0): EDID for output DVI-I-1
(II) NOUVEAU(0): Output DVI-I-0 connected
(II) NOUVEAU(0): Output DVI-I-1 disconnected
(II) NOUVEAU(0): Using exact sizes for initial modes
(II) NOUVEAU(0): Output DVI-I-0 using initial mode 1680x1050 +0+0
(II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) NOUVEAU(0): Initial CRTC_OWNER is 0
(--) NOUVEAU(0): VideoRAM: 262144 kBytes
(--) NOUVEAU(0): Virtual size is 1680x1050 (pitch 1680)
(**) NOUVEAU(0): Driver mode "1680x1050": 119.0 MHz (scaled from 0.0 MHz), 64.7 kHz, 59.9 Hz
(II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(**) NOUVEAU(0): Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
(II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(**) NOUVEAU(0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
(II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(**) NOUVEAU(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
(II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(**) NOUVEAU(0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
(II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
(II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
(II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
(II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(**) NOUVEAU(0): Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
(II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
(II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(**) NOUVEAU(0): Display dimensions: (470, 300) mm
(**) NOUVEAU(0): DPI set to (90, 88)
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib64/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib64/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib64/xorg/modules/libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 2.5.0
ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/lib64/xorg/modules/libshadowfb.so
(II) Module shadowfb: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(--) Depth 24 pixmap format is 32 bpp
(EE) NOUVEAU(0): Error creating GPU channel: -19
(EE) NOUVEAU(0): Error initialising acceleration. Falling back to NoAccel
(==) NOUVEAU(0): Backing store disabled
(==) NOUVEAU(0): Silken mouse enabled
(II) NOUVEAU(0): NVEnterVT is called.
(==) NOUVEAU(0): DPMS enabled
(II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Invalid object class mapping, disabling SELinux support.
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib64/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) NOUVEAU(0): Setting screen physical size to 444 x 277
resize called 1680 1050
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 2.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event2"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105+inet"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Logitech USB-PS/2 Optical Mouse
(**) Logitech USB-PS/2 Optical Mouse: always reports core events
(**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event3"
(II) Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
(II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
(II) Logitech USB-PS/2 Optical Mouse: Found relative axes
(II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
(II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
(**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE)
(**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
(**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
(II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) NOUVEAU(0): EDID for output DVI-I-0
(II) NOUVEAU(0): Manufacturer: SAM Model: 27e Serial#: 1296380466
(II) NOUVEAU(0): Year: 2007 Week: 19
(II) NOUVEAU(0): EDID Version: 1.3
(II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) NOUVEAU(0): Sync: Separate Composite SyncOnGreen
(II) NOUVEAU(0): Max Image Size [cm]: horiz.: 47 vert.: 30
(II) NOUVEAU(0): Gamma: 2.20
(II) NOUVEAU(0): DPMS capabilities: Off; RGB/Color Display
(II) NOUVEAU(0): First detailed timing is preferred mode
(II) NOUVEAU(0): redX: 0.644 redY: 0.333 greenX: 0.286 greenY: 0.603
(II) NOUVEAU(0): blueX: 0.152 blueY: 0.079 whiteX: 0.313 whiteY: 0.329
(II) NOUVEAU(0): Supported established timings:
(II) NOUVEAU(0): 720x400@70Hz
(II) NOUVEAU(0): 640x480@60Hz
(II) NOUVEAU(0): 640x480@67Hz
(II) NOUVEAU(0): 640x480@72Hz
(II) NOUVEAU(0): 640x480@75Hz
(II) NOUVEAU(0): 800x600@56Hz
(II) NOUVEAU(0): 800x600@60Hz
(II) NOUVEAU(0): 800x600@72Hz
(II) NOUVEAU(0): 800x600@75Hz
(II) NOUVEAU(0): 832x624@75Hz
(II) NOUVEAU(0): 1024x768@60Hz
(II) NOUVEAU(0): 1024x768@70Hz
(II) NOUVEAU(0): 1024x768@75Hz
(II) NOUVEAU(0): 1280x1024@75Hz
(II) NOUVEAU(0): 1152x864@75Hz
(II) NOUVEAU(0): Manufacturer's mask: 0
(II) NOUVEAU(0): Supported standard timings:
(II) NOUVEAU(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
(II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) NOUVEAU(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) NOUVEAU(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) NOUVEAU(0): Supported detailed timing:
(II) NOUVEAU(0): clock: 119.0 MHz Image Size: 474 x 296 mm
(II) NOUVEAU(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
(II) NOUVEAU(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
(II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 140 MHz
(II) NOUVEAU(0): Monitor name: SyncMaster
(II) NOUVEAU(0): Serial No: HVCP500694
(II) NOUVEAU(0): EDID (in hex):
(II) NOUVEAU(0): 00ffffffffffff004c2d7e023232454d
(II) NOUVEAU(0): 131101030e2f1e782ad515a455499a27
(II) NOUVEAU(0): 145054bfef80b30081808140714f0101
(II) NOUVEAU(0): 0101010101017c2e90a0601a1e403020
(II) NOUVEAU(0): 3600da281100001a000000fd00384b1e
(II) NOUVEAU(0): 510e000a202020202020000000fc0053
(II) NOUVEAU(0): 796e634d61737465720a2020000000ff
(II) NOUVEAU(0): 00485643503530303639340a202000b5
(II) NOUVEAU(0): EDID vendor "SAM", prod id 638
(II) NOUVEAU(0): EDID quirk: Detailed timing is not preferred, use largest mode at 60Hz
(II) NOUVEAU(0): Using hsync ranges from config file
(II) NOUVEAU(0): Using vrefresh ranges from config file
(II) NOUVEAU(0): Printing DDC gathered Modelines:
(II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Not using mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) NOUVEAU(0): Printing probed modes for output DVI-I-0
(II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NOUVEAU(0): EDID for output DVI-I-1
(II) NOUVEAU(0): EDID for output DVI-I-0
(II) NOUVEAU(0): Manufacturer: SAM Model: 27e Serial#: 1296380466
(II) NOUVEAU(0): Year: 2007 Week: 19
(II) NOUVEAU(0): EDID Version: 1.3
(II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) NOUVEAU(0): Sync: Separate Composite SyncOnGreen
(II) NOUVEAU(0): Max Image Size [cm]: horiz.: 47 vert.: 30
(II) NOUVEAU(0): Gamma: 2.20
(II) NOUVEAU(0): DPMS capabilities: Off; RGB/Color Display
(II) NOUVEAU(0): First detailed timing is preferred mode
(II) NOUVEAU(0): redX: 0.644 redY: 0.333 greenX: 0.286 greenY: 0.603
(II) NOUVEAU(0): blueX: 0.152 blueY: 0.079 whiteX: 0.313 whiteY: 0.329
(II) NOUVEAU(0): Supported established timings:
(II) NOUVEAU(0): 720x400@70Hz
(II) NOUVEAU(0): 640x480@60Hz
(II) NOUVEAU(0): 640x480@67Hz
(II) NOUVEAU(0): 640x480@72Hz
(II) NOUVEAU(0): 640x480@75Hz
(II) NOUVEAU(0): 800x600@56Hz
(II) NOUVEAU(0): 800x600@60Hz
(II) NOUVEAU(0): 800x600@72Hz
(II) NOUVEAU(0): 800x600@75Hz
(II) NOUVEAU(0): 832x624@75Hz
(II) NOUVEAU(0): 1024x768@60Hz
(II) NOUVEAU(0): 1024x768@70Hz
(II) NOUVEAU(0): 1024x768@75Hz
(II) NOUVEAU(0): 1280x1024@75Hz
(II) NOUVEAU(0): 1152x864@75Hz
(II) NOUVEAU(0): Manufacturer's mask: 0
(II) NOUVEAU(0): Supported standard timings:
(II) NOUVEAU(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
(II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) NOUVEAU(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) NOUVEAU(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) NOUVEAU(0): Supported detailed timing:
(II) NOUVEAU(0): clock: 119.0 MHz Image Size: 474 x 296 mm
(II) NOUVEAU(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
(II) NOUVEAU(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
(II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 140 MHz
(II) NOUVEAU(0): Monitor name: SyncMaster
(II) NOUVEAU(0): Serial No: HVCP500694
(II) NOUVEAU(0): EDID (in hex):
(II) NOUVEAU(0): 00ffffffffffff004c2d7e023232454d
(II) NOUVEAU(0): 131101030e2f1e782ad515a455499a27
(II) NOUVEAU(0): 145054bfef80b30081808140714f0101
(II) NOUVEAU(0): 0101010101017c2e90a0601a1e403020
(II) NOUVEAU(0): 3600da281100001a000000fd00384b1e
(II) NOUVEAU(0): 510e000a202020202020000000fc0053
(II) NOUVEAU(0): 796e634d61737465720a2020000000ff
(II) NOUVEAU(0): 00485643503530303639340a202000b5
(II) NOUVEAU(0): EDID vendor "SAM", prod id 638
(II) NOUVEAU(0): EDID quirk: Detailed timing is not preferred, use largest mode at 60Hz
(II) NOUVEAU(0): Using hsync ranges from config file
(II) NOUVEAU(0): Using vrefresh ranges from config file
(II) NOUVEAU(0): Printing DDC gathered Modelines:
(II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Not using mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) NOUVEAU(0): Printing probed modes for output DVI-I-0
(II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NOUVEAU(0): EDID for output DVI-I-1
(II) NOUVEAU(0): EDID for output DVI-I-0
(II) NOUVEAU(0): Manufacturer: SAM Model: 27e Serial#: 1296380466
(II) NOUVEAU(0): Year: 2007 Week: 19
(II) NOUVEAU(0): EDID Version: 1.3
(II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) NOUVEAU(0): Sync: Separate Composite SyncOnGreen
(II) NOUVEAU(0): Max Image Size [cm]: horiz.: 47 vert.: 30
(II) NOUVEAU(0): Gamma: 2.20
(II) NOUVEAU(0): DPMS capabilities: Off; RGB/Color Display
(II) NOUVEAU(0): First detailed timing is preferred mode
(II) NOUVEAU(0): redX: 0.644 redY: 0.333 greenX: 0.286 greenY: 0.603
(II) NOUVEAU(0): blueX: 0.152 blueY: 0.079 whiteX: 0.313 whiteY: 0.329
(II) NOUVEAU(0): Supported established timings:
(II) NOUVEAU(0): 720x400@70Hz
(II) NOUVEAU(0): 640x480@60Hz
(II) NOUVEAU(0): 640x480@67Hz
(II) NOUVEAU(0): 640x480@72Hz
(II) NOUVEAU(0): 640x480@75Hz
(II) NOUVEAU(0): 800x600@56Hz
(II) NOUVEAU(0): 800x600@60Hz
(II) NOUVEAU(0): 800x600@72Hz
(II) NOUVEAU(0): 800x600@75Hz
(II) NOUVEAU(0): 832x624@75Hz
(II) NOUVEAU(0): 1024x768@60Hz
(II) NOUVEAU(0): 1024x768@70Hz
(II) NOUVEAU(0): 1024x768@75Hz
(II) NOUVEAU(0): 1280x1024@75Hz
(II) NOUVEAU(0): 1152x864@75Hz
(II) NOUVEAU(0): Manufacturer's mask: 0
(II) NOUVEAU(0): Supported standard timings:
(II) NOUVEAU(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
(II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) NOUVEAU(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) NOUVEAU(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) NOUVEAU(0): Supported detailed timing:
(II) NOUVEAU(0): clock: 119.0 MHz Image Size: 474 x 296 mm
(II) NOUVEAU(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
(II) NOUVEAU(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
(II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 140 MHz
(II) NOUVEAU(0): Monitor name: SyncMaster
(II) NOUVEAU(0): Serial No: HVCP500694
(II) NOUVEAU(0): EDID (in hex):
(II) NOUVEAU(0): 00ffffffffffff004c2d7e023232454d
(II) NOUVEAU(0): 131101030e2f1e782ad515a455499a27
(II) NOUVEAU(0): 145054bfef80b30081808140714f0101
(II) NOUVEAU(0): 0101010101017c2e90a0601a1e403020
(II) NOUVEAU(0): 3600da281100001a000000fd00384b1e
(II) NOUVEAU(0): 510e000a202020202020000000fc0053
(II) NOUVEAU(0): 796e634d61737465720a2020000000ff
(II) NOUVEAU(0): 00485643503530303639340a202000b5
(II) NOUVEAU(0): EDID vendor "SAM", prod id 638
(II) NOUVEAU(0): EDID quirk: Detailed timing is not preferred, use largest mode at 60Hz
(II) NOUVEAU(0): Using hsync ranges from config file
(II) NOUVEAU(0): Using vrefresh ranges from config file
(II) NOUVEAU(0): Printing DDC gathered Modelines:
(II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Not using mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) NOUVEAU(0): Printing probed modes for output DVI-I-0
(II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NOUVEAU(0): EDID for output DVI-I-1
(II) NOUVEAU(0): NVLeaveVT is called.
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Logitech USB-PS/2 Optical Mouse: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
X.Org X Server 1.7.3
Release Date: 2009-12-3
X Protocol Version 11, Revision 0
Build Operating System: x86-7 2.6.18-164.6.1.el5
Current Operating System: Linux mail.majjas.com 2.6.32-07387-gf3cae36 #5 SMP Mon Dec 14 12:13:51 EST 2009 x86_64
Kernel command line: ro root=/dev/mapper/vg_00-LogVol02_root usbcore.autosuspend=1 crashkernel=128M SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us pcie_aspm=force intel_iommu=igfx_off
Build Date: 17 December 2009 12:08:29AM
Build ID: xorg-x11-server 1.7.3-3.fc12
Current version of pixman: 0.16.2
Before reporting problems, check http://bodhi.fedoraproject.org/
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 17 10:52:01 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins,
catalogue:/etc/X11/fontpath.d,
built-ins
(==) ModulePath set to "/usr/lib64/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x7c8540
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 7
(--) PCI:*(0:2:0:0) 10de:0193:10de:0420 nVidia Corporation G80 [GeForce 8800 GTS] rev 162, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000ac00/128, BIOS @ 0x????????/131072
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "dbe"
(II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dri"
(II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "record"
(II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "glx"
(II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "nouveau"
(II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so
(II) Module nouveau: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 0.0.10
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) NOUVEAU driver
(II) NOUVEAU driver for NVIDIA chipset families :
RIVA TNT (NV04)
RIVA TNT2 (NV05)
GeForce 256 (NV10)
GeForce 2 (NV11, NV15)
GeForce 4MX (NV17, NV18)
GeForce 3 (NV20)
GeForce 4Ti (NV25, NV28)
GeForce FX (NV3x)
GeForce 6 (NV4x)
GeForce 7 (G7x)
GeForce 8 (G8x)
(II) Primary Device is: PCI 02@00:00:0
(--) NOUVEAU(0): Chipset: "NVIDIA NV50"
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib64/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) NOUVEAU(0): Initializing int10
(II) NOUVEAU(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Reloading /usr/lib64/xorg/modules/extensions/libdri.so
(II) NOUVEAU(0): Loaded DRI module
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:02:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:02:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) NOUVEAU(0): [drm] nouveau interface version: 0.0.15
(--) NOUVEAU(0): [drm] kernel modesetting in use
(==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
(==) NOUVEAU(0): RGB weight 888
(==) NOUVEAU(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib64/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(==) NOUVEAU(0): Using HW cursor
(--) NOUVEAU(0): Linear framebuffer at 0xD0000000
(--) NOUVEAU(0): MMIO registers at 0xFA000000
(II) NOUVEAU(0): Output DVI-I-0 using monitor section Monitor0
(II) NOUVEAU(0): Output DVI-I-1 has no monitor section
(II) NOUVEAU(0): EDID for output DVI-I-0
(II) NOUVEAU(0): Manufacturer: SAM Model: 27e Serial#: 1296380466
(II) NOUVEAU(0): Year: 2007 Week: 19
(II) NOUVEAU(0): EDID Version: 1.3
(II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) NOUVEAU(0): Sync: Separate Composite SyncOnGreen
(II) NOUVEAU(0): Max Image Size [cm]: horiz.: 47 vert.: 30
(II) NOUVEAU(0): Gamma: 2.20
(II) NOUVEAU(0): DPMS capabilities: Off; RGB/Color Display
(II) NOUVEAU(0): First detailed timing is preferred mode
(II) NOUVEAU(0): redX: 0.644 redY: 0.333 greenX: 0.286 greenY: 0.603
(II) NOUVEAU(0): blueX: 0.152 blueY: 0.079 whiteX: 0.313 whiteY: 0.329
(II) NOUVEAU(0): Supported established timings:
(II) NOUVEAU(0): 720x400@70Hz
(II) NOUVEAU(0): 640x480@60Hz
(II) NOUVEAU(0): 640x480@67Hz
(II) NOUVEAU(0): 640x480@72Hz
(II) NOUVEAU(0): 640x480@75Hz
(II) NOUVEAU(0): 800x600@56Hz
(II) NOUVEAU(0): 800x600@60Hz
(II) NOUVEAU(0): 800x600@72Hz
(II) NOUVEAU(0): 800x600@75Hz
(II) NOUVEAU(0): 832x624@75Hz
(II) NOUVEAU(0): 1024x768@60Hz
(II) NOUVEAU(0): 1024x768@70Hz
(II) NOUVEAU(0): 1024x768@75Hz
(II) NOUVEAU(0): 1280x1024@75Hz
(II) NOUVEAU(0): 1152x864@75Hz
(II) NOUVEAU(0): Manufacturer's mask: 0
(II) NOUVEAU(0): Supported standard timings:
(II) NOUVEAU(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
(II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) NOUVEAU(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) NOUVEAU(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) NOUVEAU(0): Supported detailed timing:
(II) NOUVEAU(0): clock: 119.0 MHz Image Size: 474 x 296 mm
(II) NOUVEAU(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
(II) NOUVEAU(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
(II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 140 MHz
(II) NOUVEAU(0): Monitor name: SyncMaster
(II) NOUVEAU(0): Serial No: HVCP500694
(II) NOUVEAU(0): EDID (in hex):
(II) NOUVEAU(0): 00ffffffffffff004c2d7e023232454d
(II) NOUVEAU(0): 131101030e2f1e782ad515a455499a27
(II) NOUVEAU(0): 145054bfef80b30081808140714f0101
(II) NOUVEAU(0): 0101010101017c2e90a0601a1e403020
(II) NOUVEAU(0): 3600da281100001a000000fd00384b1e
(II) NOUVEAU(0): 510e000a202020202020000000fc0053
(II) NOUVEAU(0): 796e634d61737465720a2020000000ff
(II) NOUVEAU(0): 00485643503530303639340a202000b5
(II) NOUVEAU(0): EDID vendor "SAM", prod id 638
(II) NOUVEAU(0): EDID quirk: Detailed timing is not preferred, use largest mode at 60Hz
(II) NOUVEAU(0): Using EDID range info for horizontal sync
(II) NOUVEAU(0): Using EDID range info for vertical refresh
(II) NOUVEAU(0): Printing DDC gathered Modelines:
(II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Not using mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) NOUVEAU(0): Printing probed modes for output DVI-I-0
(II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NOUVEAU(0): EDID for output DVI-I-1
(II) NOUVEAU(0): Output DVI-I-0 connected
(II) NOUVEAU(0): Output DVI-I-1 disconnected
(II) NOUVEAU(0): Using exact sizes for initial modes
(II) NOUVEAU(0): Output DVI-I-0 using initial mode 1680x1050 +0+0
(II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) NOUVEAU(0): Initial CRTC_OWNER is 0
(--) NOUVEAU(0): VideoRAM: 262144 kBytes
(--) NOUVEAU(0): Virtual size is 1680x1050 (pitch 1680)
(**) NOUVEAU(0): Driver mode "1680x1050": 119.0 MHz (scaled from 0.0 MHz), 64.7 kHz, 59.9 Hz
(II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(**) NOUVEAU(0): Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
(II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(**) NOUVEAU(0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
(II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(**) NOUVEAU(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
(II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(**) NOUVEAU(0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
(II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
(II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
(II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
(II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(**) NOUVEAU(0): Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
(II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
(II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(**) NOUVEAU(0): Display dimensions: (470, 300) mm
(**) NOUVEAU(0): DPI set to (90, 88)
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib64/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib64/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib64/xorg/modules/libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 2.5.0
ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/lib64/xorg/modules/libshadowfb.so
(II) Module shadowfb: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(--) Depth 24 pixmap format is 32 bpp
(EE) NOUVEAU(0): Error creating GPU channel: -19
(EE) NOUVEAU(0): Error initialising acceleration. Falling back to NoAccel
(==) NOUVEAU(0): Backing store disabled
(==) NOUVEAU(0): Silken mouse enabled
(II) NOUVEAU(0): NVEnterVT is called.
(==) NOUVEAU(0): DPMS enabled
(II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Invalid object class mapping, disabling SELinux support.
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib64/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) NOUVEAU(0): Setting screen physical size to 444 x 277
resize called 1680 1050
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 2.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event2"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105+inet"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Logitech USB-PS/2 Optical Mouse
(**) Logitech USB-PS/2 Optical Mouse: always reports core events
(**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event3"
(II) Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
(II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
(II) Logitech USB-PS/2 Optical Mouse: Found relative axes
(II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
(II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
(**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE)
(**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
(**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
(II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) NOUVEAU(0): EDID for output DVI-I-0
(II) NOUVEAU(0): Manufacturer: SAM Model: 27e Serial#: 1296380466
(II) NOUVEAU(0): Year: 2007 Week: 19
(II) NOUVEAU(0): EDID Version: 1.3
(II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) NOUVEAU(0): Sync: Separate Composite SyncOnGreen
(II) NOUVEAU(0): Max Image Size [cm]: horiz.: 47 vert.: 30
(II) NOUVEAU(0): Gamma: 2.20
(II) NOUVEAU(0): DPMS capabilities: Off; RGB/Color Display
(II) NOUVEAU(0): First detailed timing is preferred mode
(II) NOUVEAU(0): redX: 0.644 redY: 0.333 greenX: 0.286 greenY: 0.603
(II) NOUVEAU(0): blueX: 0.152 blueY: 0.079 whiteX: 0.313 whiteY: 0.329
(II) NOUVEAU(0): Supported established timings:
(II) NOUVEAU(0): 720x400@70Hz
(II) NOUVEAU(0): 640x480@60Hz
(II) NOUVEAU(0): 640x480@67Hz
(II) NOUVEAU(0): 640x480@72Hz
(II) NOUVEAU(0): 640x480@75Hz
(II) NOUVEAU(0): 800x600@56Hz
(II) NOUVEAU(0): 800x600@60Hz
(II) NOUVEAU(0): 800x600@72Hz
(II) NOUVEAU(0): 800x600@75Hz
(II) NOUVEAU(0): 832x624@75Hz
(II) NOUVEAU(0): 1024x768@60Hz
(II) NOUVEAU(0): 1024x768@70Hz
(II) NOUVEAU(0): 1024x768@75Hz
(II) NOUVEAU(0): 1280x1024@75Hz
(II) NOUVEAU(0): 1152x864@75Hz
(II) NOUVEAU(0): Manufacturer's mask: 0
(II) NOUVEAU(0): Supported standard timings:
(II) NOUVEAU(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
(II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) NOUVEAU(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) NOUVEAU(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) NOUVEAU(0): Supported detailed timing:
(II) NOUVEAU(0): clock: 119.0 MHz Image Size: 474 x 296 mm
(II) NOUVEAU(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
(II) NOUVEAU(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
(II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 140 MHz
(II) NOUVEAU(0): Monitor name: SyncMaster
(II) NOUVEAU(0): Serial No: HVCP500694
(II) NOUVEAU(0): EDID (in hex):
(II) NOUVEAU(0): 00ffffffffffff004c2d7e023232454d
(II) NOUVEAU(0): 131101030e2f1e782ad515a455499a27
(II) NOUVEAU(0): 145054bfef80b30081808140714f0101
(II) NOUVEAU(0): 0101010101017c2e90a0601a1e403020
(II) NOUVEAU(0): 3600da281100001a000000fd00384b1e
(II) NOUVEAU(0): 510e000a202020202020000000fc0053
(II) NOUVEAU(0): 796e634d61737465720a2020000000ff
(II) NOUVEAU(0): 00485643503530303639340a202000b5
(II) NOUVEAU(0): EDID vendor "SAM", prod id 638
(II) NOUVEAU(0): EDID quirk: Detailed timing is not preferred, use largest mode at 60Hz
(II) NOUVEAU(0): Using hsync ranges from config file
(II) NOUVEAU(0): Using vrefresh ranges from config file
(II) NOUVEAU(0): Printing DDC gathered Modelines:
(II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Not using mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) NOUVEAU(0): Printing probed modes for output DVI-I-0
(II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NOUVEAU(0): EDID for output DVI-I-1
(II) NOUVEAU(0): EDID for output DVI-I-0
(II) NOUVEAU(0): Manufacturer: SAM Model: 27e Serial#: 1296380466
(II) NOUVEAU(0): Year: 2007 Week: 19
(II) NOUVEAU(0): EDID Version: 1.3
(II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) NOUVEAU(0): Sync: Separate Composite SyncOnGreen
(II) NOUVEAU(0): Max Image Size [cm]: horiz.: 47 vert.: 30
(II) NOUVEAU(0): Gamma: 2.20
(II) NOUVEAU(0): DPMS capabilities: Off; RGB/Color Display
(II) NOUVEAU(0): First detailed timing is preferred mode
(II) NOUVEAU(0): redX: 0.644 redY: 0.333 greenX: 0.286 greenY: 0.603
(II) NOUVEAU(0): blueX: 0.152 blueY: 0.079 whiteX: 0.313 whiteY: 0.329
(II) NOUVEAU(0): Supported established timings:
(II) NOUVEAU(0): 720x400@70Hz
(II) NOUVEAU(0): 640x480@60Hz
(II) NOUVEAU(0): 640x480@67Hz
(II) NOUVEAU(0): 640x480@72Hz
(II) NOUVEAU(0): 640x480@75Hz
(II) NOUVEAU(0): 800x600@56Hz
(II) NOUVEAU(0): 800x600@60Hz
(II) NOUVEAU(0): 800x600@72Hz
(II) NOUVEAU(0): 800x600@75Hz
(II) NOUVEAU(0): 832x624@75Hz
(II) NOUVEAU(0): 1024x768@60Hz
(II) NOUVEAU(0): 1024x768@70Hz
(II) NOUVEAU(0): 1024x768@75Hz
(II) NOUVEAU(0): 1280x1024@75Hz
(II) NOUVEAU(0): 1152x864@75Hz
(II) NOUVEAU(0): Manufacturer's mask: 0
(II) NOUVEAU(0): Supported standard timings:
(II) NOUVEAU(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
(II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) NOUVEAU(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) NOUVEAU(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) NOUVEAU(0): Supported detailed timing:
(II) NOUVEAU(0): clock: 119.0 MHz Image Size: 474 x 296 mm
(II) NOUVEAU(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
(II) NOUVEAU(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
(II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 140 MHz
(II) NOUVEAU(0): Monitor name: SyncMaster
(II) NOUVEAU(0): Serial No: HVCP500694
(II) NOUVEAU(0): EDID (in hex):
(II) NOUVEAU(0): 00ffffffffffff004c2d7e023232454d
(II) NOUVEAU(0): 131101030e2f1e782ad515a455499a27
(II) NOUVEAU(0): 145054bfef80b30081808140714f0101
(II) NOUVEAU(0): 0101010101017c2e90a0601a1e403020
(II) NOUVEAU(0): 3600da281100001a000000fd00384b1e
(II) NOUVEAU(0): 510e000a202020202020000000fc0053
(II) NOUVEAU(0): 796e634d61737465720a2020000000ff
(II) NOUVEAU(0): 00485643503530303639340a202000b5
(II) NOUVEAU(0): EDID vendor "SAM", prod id 638
(II) NOUVEAU(0): EDID quirk: Detailed timing is not preferred, use largest mode at 60Hz
(II) NOUVEAU(0): Using hsync ranges from config file
(II) NOUVEAU(0): Using vrefresh ranges from config file
(II) NOUVEAU(0): Printing DDC gathered Modelines:
(II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Not using mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) NOUVEAU(0): Printing probed modes for output DVI-I-0
(II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NOUVEAU(0): EDID for output DVI-I-1
(II) NOUVEAU(0): EDID for output DVI-I-0
(II) NOUVEAU(0): Manufacturer: SAM Model: 27e Serial#: 1296380466
(II) NOUVEAU(0): Year: 2007 Week: 19
(II) NOUVEAU(0): EDID Version: 1.3
(II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) NOUVEAU(0): Sync: Separate Composite SyncOnGreen
(II) NOUVEAU(0): Max Image Size [cm]: horiz.: 47 vert.: 30
(II) NOUVEAU(0): Gamma: 2.20
(II) NOUVEAU(0): DPMS capabilities: Off; RGB/Color Display
(II) NOUVEAU(0): First detailed timing is preferred mode
(II) NOUVEAU(0): redX: 0.644 redY: 0.333 greenX: 0.286 greenY: 0.603
(II) NOUVEAU(0): blueX: 0.152 blueY: 0.079 whiteX: 0.313 whiteY: 0.329
(II) NOUVEAU(0): Supported established timings:
(II) NOUVEAU(0): 720x400@70Hz
(II) NOUVEAU(0): 640x480@60Hz
(II) NOUVEAU(0): 640x480@67Hz
(II) NOUVEAU(0): 640x480@72Hz
(II) NOUVEAU(0): 640x480@75Hz
(II) NOUVEAU(0): 800x600@56Hz
(II) NOUVEAU(0): 800x600@60Hz
(II) NOUVEAU(0): 800x600@72Hz
(II) NOUVEAU(0): 800x600@75Hz
(II) NOUVEAU(0): 832x624@75Hz
(II) NOUVEAU(0): 1024x768@60Hz
(II) NOUVEAU(0): 1024x768@70Hz
(II) NOUVEAU(0): 1024x768@75Hz
(II) NOUVEAU(0): 1280x1024@75Hz
(II) NOUVEAU(0): 1152x864@75Hz
(II) NOUVEAU(0): Manufacturer's mask: 0
(II) NOUVEAU(0): Supported standard timings:
(II) NOUVEAU(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
(II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) NOUVEAU(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) NOUVEAU(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) NOUVEAU(0): Supported detailed timing:
(II) NOUVEAU(0): clock: 119.0 MHz Image Size: 474 x 296 mm
(II) NOUVEAU(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
(II) NOUVEAU(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
(II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 140 MHz
(II) NOUVEAU(0): Monitor name: SyncMaster
(II) NOUVEAU(0): Serial No: HVCP500694
(II) NOUVEAU(0): EDID (in hex):
(II) NOUVEAU(0): 00ffffffffffff004c2d7e023232454d
(II) NOUVEAU(0): 131101030e2f1e782ad515a455499a27
(II) NOUVEAU(0): 145054bfef80b30081808140714f0101
(II) NOUVEAU(0): 0101010101017c2e90a0601a1e403020
(II) NOUVEAU(0): 3600da281100001a000000fd00384b1e
(II) NOUVEAU(0): 510e000a202020202020000000fc0053
(II) NOUVEAU(0): 796e634d61737465720a2020000000ff
(II) NOUVEAU(0): 00485643503530303639340a202000b5
(II) NOUVEAU(0): EDID vendor "SAM", prod id 638
(II) NOUVEAU(0): EDID quirk: Detailed timing is not preferred, use largest mode at 60Hz
(II) NOUVEAU(0): Using hsync ranges from config file
(II) NOUVEAU(0): Using vrefresh ranges from config file
(II) NOUVEAU(0): Printing DDC gathered Modelines:
(II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Not using mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) NOUVEAU(0): Printing probed modes for output DVI-I-0
(II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NOUVEAU(0): EDID for output DVI-I-1
(II) NOUVEAU(0): EDID for output DVI-I-0
(II) NOUVEAU(0): Manufacturer: SAM Model: 27e Serial#: 1296380466
(II) NOUVEAU(0): Year: 2007 Week: 19
(II) NOUVEAU(0): EDID Version: 1.3
(II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) NOUVEAU(0): Sync: Separate Composite SyncOnGreen
(II) NOUVEAU(0): Max Image Size [cm]: horiz.: 47 vert.: 30
(II) NOUVEAU(0): Gamma: 2.20
(II) NOUVEAU(0): DPMS capabilities: Off; RGB/Color Display
(II) NOUVEAU(0): First detailed timing is preferred mode
(II) NOUVEAU(0): redX: 0.644 redY: 0.333 greenX: 0.286 greenY: 0.603
(II) NOUVEAU(0): blueX: 0.152 blueY: 0.079 whiteX: 0.313 whiteY: 0.329
(II) NOUVEAU(0): Supported established timings:
(II) NOUVEAU(0): 720x400@70Hz
(II) NOUVEAU(0): 640x480@60Hz
(II) NOUVEAU(0): 640x480@67Hz
(II) NOUVEAU(0): 640x480@72Hz
(II) NOUVEAU(0): 640x480@75Hz
(II) NOUVEAU(0): 800x600@56Hz
(II) NOUVEAU(0): 800x600@60Hz
(II) NOUVEAU(0): 800x600@72Hz
(II) NOUVEAU(0): 800x600@75Hz
(II) NOUVEAU(0): 832x624@75Hz
(II) NOUVEAU(0): 1024x768@60Hz
(II) NOUVEAU(0): 1024x768@70Hz
(II) NOUVEAU(0): 1024x768@75Hz
(II) NOUVEAU(0): 1280x1024@75Hz
(II) NOUVEAU(0): 1152x864@75Hz
(II) NOUVEAU(0): Manufacturer's mask: 0
(II) NOUVEAU(0): Supported standard timings:
(II) NOUVEAU(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
(II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) NOUVEAU(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) NOUVEAU(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) NOUVEAU(0): Supported detailed timing:
(II) NOUVEAU(0): clock: 119.0 MHz Image Size: 474 x 296 mm
(II) NOUVEAU(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
(II) NOUVEAU(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
(II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 140 MHz
(II) NOUVEAU(0): Monitor name: SyncMaster
(II) NOUVEAU(0): Serial No: HVCP500694
(II) NOUVEAU(0): EDID (in hex):
(II) NOUVEAU(0): 00ffffffffffff004c2d7e023232454d
(II) NOUVEAU(0): 131101030e2f1e782ad515a455499a27
(II) NOUVEAU(0): 145054bfef80b30081808140714f0101
(II) NOUVEAU(0): 0101010101017c2e90a0601a1e403020
(II) NOUVEAU(0): 3600da281100001a000000fd00384b1e
(II) NOUVEAU(0): 510e000a202020202020000000fc0053
(II) NOUVEAU(0): 796e634d61737465720a2020000000ff
(II) NOUVEAU(0): 00485643503530303639340a202000b5
(II) NOUVEAU(0): EDID vendor "SAM", prod id 638
(II) NOUVEAU(0): EDID quirk: Detailed timing is not preferred, use largest mode at 60Hz
(II) NOUVEAU(0): Using hsync ranges from config file
(II) NOUVEAU(0): Using vrefresh ranges from config file
(II) NOUVEAU(0): Printing DDC gathered Modelines:
(II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Not using mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) NOUVEAU(0): Printing probed modes for output DVI-I-0
(II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NOUVEAU(0): EDID for output DVI-I-1
(II) NOUVEAU(0): EDID for output DVI-I-0
(II) NOUVEAU(0): Manufacturer: SAM Model: 27e Serial#: 1296380466
(II) NOUVEAU(0): Year: 2007 Week: 19
(II) NOUVEAU(0): EDID Version: 1.3
(II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) NOUVEAU(0): Sync: Separate Composite SyncOnGreen
(II) NOUVEAU(0): Max Image Size [cm]: horiz.: 47 vert.: 30
(II) NOUVEAU(0): Gamma: 2.20
(II) NOUVEAU(0): DPMS capabilities: Off; RGB/Color Display
(II) NOUVEAU(0): First detailed timing is preferred mode
(II) NOUVEAU(0): redX: 0.644 redY: 0.333 greenX: 0.286 greenY: 0.603
(II) NOUVEAU(0): blueX: 0.152 blueY: 0.079 whiteX: 0.313 whiteY: 0.329
(II) NOUVEAU(0): Supported established timings:
(II) NOUVEAU(0): 720x400@70Hz
(II) NOUVEAU(0): 640x480@60Hz
(II) NOUVEAU(0): 640x480@67Hz
(II) NOUVEAU(0): 640x480@72Hz
(II) NOUVEAU(0): 640x480@75Hz
(II) NOUVEAU(0): 800x600@56Hz
(II) NOUVEAU(0): 800x600@60Hz
(II) NOUVEAU(0): 800x600@72Hz
(II) NOUVEAU(0): 800x600@75Hz
(II) NOUVEAU(0): 832x624@75Hz
(II) NOUVEAU(0): 1024x768@60Hz
(II) NOUVEAU(0): 1024x768@70Hz
(II) NOUVEAU(0): 1024x768@75Hz
(II) NOUVEAU(0): 1280x1024@75Hz
(II) NOUVEAU(0): 1152x864@75Hz
(II) NOUVEAU(0): Manufacturer's mask: 0
(II) NOUVEAU(0): Supported standard timings:
(II) NOUVEAU(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
(II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) NOUVEAU(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) NOUVEAU(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) NOUVEAU(0): Supported detailed timing:
(II) NOUVEAU(0): clock: 119.0 MHz Image Size: 474 x 296 mm
(II) NOUVEAU(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
(II) NOUVEAU(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
(II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 140 MHz
(II) NOUVEAU(0): Monitor name: SyncMaster
(II) NOUVEAU(0): Serial No: HVCP500694
(II) NOUVEAU(0): EDID (in hex):
(II) NOUVEAU(0): 00ffffffffffff004c2d7e023232454d
(II) NOUVEAU(0): 131101030e2f1e782ad515a455499a27
(II) NOUVEAU(0): 145054bfef80b30081808140714f0101
(II) NOUVEAU(0): 0101010101017c2e90a0601a1e403020
(II) NOUVEAU(0): 3600da281100001a000000fd00384b1e
(II) NOUVEAU(0): 510e000a202020202020000000fc0053
(II) NOUVEAU(0): 796e634d61737465720a2020000000ff
(II) NOUVEAU(0): 00485643503530303639340a202000b5
(II) NOUVEAU(0): EDID vendor "SAM", prod id 638
(II) NOUVEAU(0): EDID quirk: Detailed timing is not preferred, use largest mode at 60Hz
(II) NOUVEAU(0): Using hsync ranges from config file
(II) NOUVEAU(0): Using vrefresh ranges from config file
(II) NOUVEAU(0): Printing DDC gathered Modelines:
(II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Not using mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) NOUVEAU(0): Printing probed modes for output DVI-I-0
(II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NOUVEAU(0): EDID for output DVI-I-1
(II) NOUVEAU(0): EDID for output DVI-I-0
(II) NOUVEAU(0): Manufacturer: SAM Model: 27e Serial#: 1296380466
(II) NOUVEAU(0): Year: 2007 Week: 19
(II) NOUVEAU(0): EDID Version: 1.3
(II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) NOUVEAU(0): Sync: Separate Composite SyncOnGreen
(II) NOUVEAU(0): Max Image Size [cm]: horiz.: 47 vert.: 30
(II) NOUVEAU(0): Gamma: 2.20
(II) NOUVEAU(0): DPMS capabilities: Off; RGB/Color Display
(II) NOUVEAU(0): First detailed timing is preferred mode
(II) NOUVEAU(0): redX: 0.644 redY: 0.333 greenX: 0.286 greenY: 0.603
(II) NOUVEAU(0): blueX: 0.152 blueY: 0.079 whiteX: 0.313 whiteY: 0.329
(II) NOUVEAU(0): Supported established timings:
(II) NOUVEAU(0): 720x400@70Hz
(II) NOUVEAU(0): 640x480@60Hz
(II) NOUVEAU(0): 640x480@67Hz
(II) NOUVEAU(0): 640x480@72Hz
(II) NOUVEAU(0): 640x480@75Hz
(II) NOUVEAU(0): 800x600@56Hz
(II) NOUVEAU(0): 800x600@60Hz
(II) NOUVEAU(0): 800x600@72Hz
(II) NOUVEAU(0): 800x600@75Hz
(II) NOUVEAU(0): 832x624@75Hz
(II) NOUVEAU(0): 1024x768@60Hz
(II) NOUVEAU(0): 1024x768@70Hz
(II) NOUVEAU(0): 1024x768@75Hz
(II) NOUVEAU(0): 1280x1024@75Hz
(II) NOUVEAU(0): 1152x864@75Hz
(II) NOUVEAU(0): Manufacturer's mask: 0
(II) NOUVEAU(0): Supported standard timings:
(II) NOUVEAU(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
(II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) NOUVEAU(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) NOUVEAU(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) NOUVEAU(0): Supported detailed timing:
(II) NOUVEAU(0): clock: 119.0 MHz Image Size: 474 x 296 mm
(II) NOUVEAU(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
(II) NOUVEAU(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
(II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 140 MHz
(II) NOUVEAU(0): Monitor name: SyncMaster
(II) NOUVEAU(0): Serial No: HVCP500694
(II) NOUVEAU(0): EDID (in hex):
(II) NOUVEAU(0): 00ffffffffffff004c2d7e023232454d
(II) NOUVEAU(0): 131101030e2f1e782ad515a455499a27
(II) NOUVEAU(0): 145054bfef80b30081808140714f0101
(II) NOUVEAU(0): 0101010101017c2e90a0601a1e403020
(II) NOUVEAU(0): 3600da281100001a000000fd00384b1e
(II) NOUVEAU(0): 510e000a202020202020000000fc0053
(II) NOUVEAU(0): 796e634d61737465720a2020000000ff
(II) NOUVEAU(0): 00485643503530303639340a202000b5
(II) NOUVEAU(0): EDID vendor "SAM", prod id 638
(II) NOUVEAU(0): EDID quirk: Detailed timing is not preferred, use largest mode at 60Hz
(II) NOUVEAU(0): Using hsync ranges from config file
(II) NOUVEAU(0): Using vrefresh ranges from config file
(II) NOUVEAU(0): Printing DDC gathered Modelines:
(II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Not using mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) NOUVEAU(0): Printing probed modes for output DVI-I-0
(II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NOUVEAU(0): EDID for output DVI-I-1
(II) NOUVEAU(0): EDID for output DVI-I-0
(II) NOUVEAU(0): Manufacturer: SAM Model: 27e Serial#: 1296380466
(II) NOUVEAU(0): Year: 2007 Week: 19
(II) NOUVEAU(0): EDID Version: 1.3
(II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) NOUVEAU(0): Sync: Separate Composite SyncOnGreen
(II) NOUVEAU(0): Max Image Size [cm]: horiz.: 47 vert.: 30
(II) NOUVEAU(0): Gamma: 2.20
(II) NOUVEAU(0): DPMS capabilities: Off; RGB/Color Display
(II) NOUVEAU(0): First detailed timing is preferred mode
(II) NOUVEAU(0): redX: 0.644 redY: 0.333 greenX: 0.286 greenY: 0.603
(II) NOUVEAU(0): blueX: 0.152 blueY: 0.079 whiteX: 0.313 whiteY: 0.329
(II) NOUVEAU(0): Supported established timings:
(II) NOUVEAU(0): 720x400@70Hz
(II) NOUVEAU(0): 640x480@60Hz
(II) NOUVEAU(0): 640x480@67Hz
(II) NOUVEAU(0): 640x480@72Hz
(II) NOUVEAU(0): 640x480@75Hz
(II) NOUVEAU(0): 800x600@56Hz
(II) NOUVEAU(0): 800x600@60Hz
(II) NOUVEAU(0): 800x600@72Hz
(II) NOUVEAU(0): 800x600@75Hz
(II) NOUVEAU(0): 832x624@75Hz
(II) NOUVEAU(0): 1024x768@60Hz
(II) NOUVEAU(0): 1024x768@70Hz
(II) NOUVEAU(0): 1024x768@75Hz
(II) NOUVEAU(0): 1280x1024@75Hz
(II) NOUVEAU(0): 1152x864@75Hz
(II) NOUVEAU(0): Manufacturer's mask: 0
(II) NOUVEAU(0): Supported standard timings:
(II) NOUVEAU(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
(II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) NOUVEAU(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) NOUVEAU(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) NOUVEAU(0): Supported detailed timing:
(II) NOUVEAU(0): clock: 119.0 MHz Image Size: 474 x 296 mm
(II) NOUVEAU(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
(II) NOUVEAU(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
(II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 140 MHz
(II) NOUVEAU(0): Monitor name: SyncMaster
(II) NOUVEAU(0): Serial No: HVCP500694
(II) NOUVEAU(0): EDID (in hex):
(II) NOUVEAU(0): 00ffffffffffff004c2d7e023232454d
(II) NOUVEAU(0): 131101030e2f1e782ad515a455499a27
(II) NOUVEAU(0): 145054bfef80b30081808140714f0101
(II) NOUVEAU(0): 0101010101017c2e90a0601a1e403020
(II) NOUVEAU(0): 3600da281100001a000000fd00384b1e
(II) NOUVEAU(0): 510e000a202020202020000000fc0053
(II) NOUVEAU(0): 796e634d61737465720a2020000000ff
(II) NOUVEAU(0): 00485643503530303639340a202000b5
(II) NOUVEAU(0): EDID vendor "SAM", prod id 638
(II) NOUVEAU(0): EDID quirk: Detailed timing is not preferred, use largest mode at 60Hz
(II) NOUVEAU(0): Using hsync ranges from config file
(II) NOUVEAU(0): Using vrefresh ranges from config file
(II) NOUVEAU(0): Printing DDC gathered Modelines:
(II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Not using mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) NOUVEAU(0): Printing probed modes for output DVI-I-0
(II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NOUVEAU(0): EDID for output DVI-I-1
Backtrace:
0: /usr/bin/Xorg (xorg_backtrace+0x28) [0x49e998]
1: /usr/bin/Xorg (0x400000+0x619c9) [0x4619c9]
2: /lib64/libpthread.so.0 (0x3c40a00000+0xefa0) [0x3c40a0efa0]
3: /usr/lib64/libpixman-1.so.0 (0x3c48600000+0x6ba0) [0x3c48606ba0]
4: /usr/lib64/libpixman-1.so.0 (0x3c48600000+0x35289) [0x3c48635289]
5: /usr/lib64/libpixman-1.so.0 (0x3c48600000+0x2fa5b) [0x3c4862fa5b]
6: /usr/lib64/libpixman-1.so.0 (0x3c48600000+0x376e2) [0x3c486376e2]
7: /usr/lib64/libpixman-1.so.0 (0x3c48600000+0x38a50) [0x3c48638a50]
8: /usr/lib64/libpixman-1.so.0 (0x3c48600000+0x2f75a) [0x3c4862f75a]
9: /usr/lib64/libpixman-1.so.0 (pixman_image_composite+0x17c) [0x3c486304ec]
10: /usr/lib64/xorg/modules/libfb.so (fbComposite+0x160) [0x7f63560a5950]
11: /usr/bin/Xorg (0x400000+0xd1de0) [0x4d1de0]
12: /usr/lib64/xorg/modules/libshadowfb.so (0x7f6355c74000+0x4119) [0x7f6355c78119]
13: /usr/bin/Xorg (0x400000+0x15e5d9) [0x55e5d9]
14: /usr/bin/Xorg (0x400000+0x15e8a5) [0x55e8a5]
15: /usr/bin/Xorg (0x400000+0xa2426) [0x4a2426]
16: /usr/bin/Xorg (0x400000+0x4edce) [0x44edce]
17: /usr/bin/Xorg (MapWindow+0x179) [0x452eb9]
18: /usr/bin/Xorg (0x400000+0x2bdd6) [0x42bdd6]
19: /usr/bin/Xorg (0x400000+0x2c6ac) [0x42c6ac]
20: /usr/bin/Xorg (0x400000+0x21d0a) [0x421d0a]
21: /lib64/libc.so.6 (__libc_start_main+0xfd) [0x3c3fe1eb1d]
22: /usr/bin/Xorg (0x400000+0x218b9) [0x4218b9]
Segmentation fault at address 0x7f6354ea13f4
Fatal server error:
Caught signal 11 (Segmentation fault). Server aborting
Please consult the Fedora Project support
at http://bodhi.fedoraproject.org/
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) Logitech USB-PS/2 Optical Mouse: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) NOUVEAU(0): NVLeaveVT is called.
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-07387-gf3cae36 (mbreuer@xxxxxxxxxxxxxxx) (gcc version 4.4.2 20091027 (Red Hat 4.4.2-7) (GCC) ) #5 SMP Mon Dec 14 12:13:51 EST 2009
Command line: ro root=/dev/mapper/vg_00-LogVol02_root usbcore.autosuspend=1 crashkernel=128M SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us pcie_aspm=force intel_iommu=igfx_off
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009cc00 (usable)
BIOS-e820: 000000000009cc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4c00 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bf780000 (usable)
BIOS-e820: 00000000bf780000 - 00000000bf798000 (ACPI data)
BIOS-e820: 00000000bf798000 - 00000000bf7dc000 (ACPI NVS)
BIOS-e820: 00000000bf7dc000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000340000000 (usable)
NX (Execute Disable) protection: active
DMI 2.5 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x340000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E3FFF write-protect
E4000-EBFFF write-through
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 200000000 mask F00000000 write-back
2 base 300000000 mask FC0000000 write-back
3 base 0C0000000 mask FC0000000 uncachable
4 base 0BF800000 mask FFF800000 uncachable
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 8GB, type WB
reg 1, base: 8GB, range: 4GB, type WB
reg 2, base: 12GB, range: 1GB, type WB
reg 3, base: 3GB, range: 1GB, type UC
reg 4, base: 3064MB, range: 8MB, type UC
total RAM covered: 12280M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3064MB, range: 8MB, type UC
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 4GB, type WB
reg 5, base: 12GB, range: 1GB, type WB
e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbf780 max_arch_pfn = 0x400000000
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009cc00 (usable)
modified: 000000000009cc00 - 00000000000a0000 (reserved)
modified: 00000000000e4c00 - 0000000000100000 (reserved)
modified: 0000000000100000 - 00000000bf780000 (usable)
modified: 00000000bf780000 - 00000000bf798000 (ACPI data)
modified: 00000000bf798000 - 00000000bf7dc000 (ACPI NVS)
modified: 00000000bf7dc000 - 00000000c0000000 (reserved)
modified: 00000000fee00000 - 00000000fee01000 (reserved)
modified: 00000000ffe00000 - 0000000100000000 (reserved)
modified: 0000000100000000 - 0000000340000000 (usable)
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000bf780000
0000000000 - 00bf600000 page 2M
00bf600000 - 00bf780000 page 4k
kernel direct mapping tables up to bf780000 @ 14000-19000
init_memory_mapping: 0000000100000000-0000000340000000
0100000000 - 0340000000 page 2M
kernel direct mapping tables up to 340000000 @ 17000-25000
RAMDISK: 37704000 - 37fefe8a
Reserving 128MB of memory at 32MB for crashkernel (System RAM: 13312MB)
ACPI: RSDP 00000000000fb1a0 00024 (v02 ACPIAM)
ACPI: XSDT 00000000bf780100 00064 (v01 111209 XSDT1642 20091112 MSFT 00000097)
ACPI: FACP 00000000bf780290 000F4 (v03 111209 FACP1642 20091112 MSFT 00000097)
ACPI: DSDT 00000000bf7804b0 0B66D (v01 A1265 A1265001 00000001 INTL 20060113)
ACPI: FACS 00000000bf798000 00040
ACPI: APIC 00000000bf780390 000D8 (v01 111209 APIC1642 20091112 MSFT 00000097)
ACPI: MCFG 00000000bf780470 0003C (v01 111209 OEMMCFG 20091112 MSFT 00000097)
ACPI: OEMB 00000000bf798040 00072 (v01 111209 OEMB1642 20091112 MSFT 00000097)
ACPI: HPET 00000000bf78f4b0 00038 (v01 111209 OEMHPET 20091112 MSFT 00000097)
ACPI: DMAR 00000000bf7980c0 00138 (v01 AMI OEMDMAR 00000001 MSFT 00000097)
ACPI: OSFR 00000000bf78f4f0 000B0 (v01 111209 OEMOSFR 20091112 MSFT 00000097)
ACPI: SSDT 00000000bf79a470 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
ACPI: Local APIC address 0xfee00000
found SMP MP-table at [ffff8800000ff780] ff780
No NUMA configuration found
Faking a node at 0000000000000000-0000000340000000
Bootmem setup node 0 0000000000000000-0000000340000000
NODE_DATA [0000000000020000 - 0000000000034fff]
bootmap [0000000000100000 - 0000000000167fff] pages 68
(14 early reservations) ==> bootmem [0000000000 - 0340000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0001da28e0] TEXT DATA BSS ==> [0001000000 - 0001da28e0]
#3 [0037704000 - 0037fefe8a] RAMDISK ==> [0037704000 - 0037fefe8a]
#4 [0001da3000 - 0001da3294] BRK ==> [0001da3000 - 0001da3294]
#5 [0000010000 - 0000014000] ACPI WAKEUP ==> [0000010000 - 0000014000]
#6 [0000014000 - 0000017000] PGTABLE ==> [0000014000 - 0000017000]
#7 [0000017000 - 0000020000] PGTABLE ==> [0000017000 - 0000020000]
#8 [0002000000 - 000a000000] CRASH KERNEL ==> [0002000000 - 000a000000]
#9 [00000ff790 - 0000100000] BIOS reserved ==> [00000ff790 - 0000100000]
#10 [00000ff780 - 00000ff790] MP-table mpf ==> [00000ff780 - 00000ff790]
#11 [000009cc00 - 00000f1300] BIOS reserved ==> [000009cc00 - 00000f1300]
#12 [00000f14c4 - 00000ff780] BIOS reserved ==> [00000f14c4 - 00000ff780]
#13 [00000f1300 - 00000f14c4] MP-table mpc ==> [00000f1300 - 00000f14c4]
[ffffea0000000000-ffffea000b5fffff] PMD -> [ffff880028600000-ffff880032dfffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00340000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009c
0: 0x00000100 -> 0x000bf780
0: 0x00100000 -> 0x00340000
On node 0 totalpages: 3143436
DMA zone: 56 pages used for memmap
DMA zone: 117 pages reserved
DMA zone: 3807 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 765880 pages, LIFO batch:31
Normal zone: 32256 pages used for memmap
Normal zone: 2327040 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 16 CPUs, 8 hotplug CPUs
nr_irqs_gsi: 48
Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff880028200000 s90456 r8192 d24232 u131072
pcpu-alloc: s90456 r8192 d24232 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3096727
Policy zone: Normal
Kernel command line: ro root=/dev/mapper/vg_00-LogVol02_root usbcore.autosuspend=1 crashkernel=128M SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us pcie_aspm=force intel_iommu=igfx_off
PCIe ASPM is forcedly enabled
Intel-IOMMU: disable GFX device mapping
PID hash table entries: 4096 (order: 3, 32768 bytes)
Initializing CPU#0
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 12179248k/13631488k available (4479k kernel code, 1057744k absent, 394496k reserved, 6685k data, 1516k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is enabled.
NR_IRQS:4352 nr_irqs:944
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 125829120 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2672.904 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5345.80 BogoMIPS (lpj=2672904)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU 0/0x0 -> Node 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 SHD:8
using mwait in idle threads.
Performance Events: Nehalem/Corei7 events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
ACPI: Core revision 20091112
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21989 entries in 87 pages
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fbfff000 flags: 0x0
IOMMU fbfff000: ver 1:0 cap c9008010e60262 ecap f0207a
DMAR: DRHD base: 0x000000fbffe000 flags: 0x1
IOMMU fbffe000: ver 1:0 cap c90780106f0462 ecap f020fe
DMAR: RMRR base: 0x000000000ec000 end: 0x000000000effff
DMAR: RMRR base: 0x000000bf7dc000 end: 0x000000bf7dbfff
DMAR: ATSR flags: 0x0
IOAPIC id 8 under DRHD base 0xfbffe000
IOAPIC id 9 under DRHD base 0xfbffe000
Enabled Interrupt-remapping
Setting APIC routing to flat
alloc irq_desc for 48 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 49 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
APIC calibration not consistent with PM-Timer: 121ms instead of 100ms
APIC delta adjusted to PM-Timer: 835224 (1018965)
Booting processor 1 APIC 0x2 ip 0x6000
Initializing CPU#1
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU 1/0x2 -> Node 0
CPU1: Thermal monitoring enabled (TM1)
CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
CPU1: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
Booting processor 2 APIC 0x4 ip 0x6000
Initializing CPU#2
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU 2/0x4 -> Node 0
CPU2: Thermal monitoring enabled (TM1)
CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
CPU2: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
Booting processor 3 APIC 0x6 ip 0x6000
Initializing CPU#3
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU 3/0x6 -> Node 0
CPU3: Thermal monitoring enabled (TM1)
CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
CPU3: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
Booting processor 4 APIC 0x1 ip 0x6000
Initializing CPU#4
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU 4/0x1 -> Node 0
CPU4: Thermal monitoring enabled (TM1)
CPU 4 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU4: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
Booting processor 5 APIC 0x3 ip 0x6000
Initializing CPU#5
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU 5/0x3 -> Node 0
CPU5: Thermal monitoring enabled (TM1)
CPU 5 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU5: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
Booting processor 6 APIC 0x5 ip 0x6000
Initializing CPU#6
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU 6/0x5 -> Node 0
CPU6: Thermal monitoring enabled (TM1)
CPU 6 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU6: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
Booting processor 7 APIC 0x7 ip 0x6000
Initializing CPU#7
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU 7/0x7 -> Node 0
CPU7: Thermal monitoring enabled (TM1)
CPU 7 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU7: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
Brought up 8 CPUs
Total of 8 processors activated (43264.94 BogoMIPS).
regulator: core version 0.5
Time: 15:48:27 Date: 12/17/09
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff] (ignored)
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
IOH bus: [00, fb]
IOH bus: 00 index 0 io port: [0, efff]
IOH bus: 00 index 1 mmio: [d0000000, fbffffff]
pci 0000:00:1a.0: reg 20: [io 0x9800-0x981f]
pci 0000:00:1a.1: reg 20: [io 0x9880-0x989f]
pci 0000:00:1a.2: reg 20: [io 0x9c00-0x9c1f]
pci 0000:00:1a.7: reg 10: [mem 0xf7fff000-0xf7fff3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xf7ff8000-0xf7ffbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0x9080-0x909f]
pci 0000:00:1d.1: reg 20: [io 0x9400-0x941f]
pci 0000:00:1d.2: reg 20: [io 0x9480-0x949f]
pci 0000:00:1d.7: reg 10: [mem 0xf7ffe000-0xf7ffe3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f)
pci 0000:00:1f.2: reg 10: [io 0x8c00-0x8c07]
pci 0000:00:1f.2: reg 14: [io 0x8880-0x8883]
pci 0000:00:1f.2: reg 18: [io 0x8800-0x8807]
pci 0000:00:1f.2: reg 1c: [io 0x8480-0x8483]
pci 0000:00:1f.2: reg 20: [io 0x8400-0x841f]
pci 0000:00:1f.2: reg 24: [mem 0xf7ffc000-0xf7ffc7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xf7ffd000-0xf7ffd0ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
PCI: peer root bus 00 res updated from pci conf
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:02:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
pci 0000:02:00.0: reg 24: [io 0xac00-0xac7f]
pci 0000:02:00.0: reg 30: [mem 0xfbae0000-0xfbafffff pref]
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0: bridge window [io 0xa000-0xafff]
pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbafffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:1c.0: PCI bridge to [bus 07-07]
pci 0000:00:1c.0: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci 0000:06:00.0: reg 10: [mem 0xfbdfc000-0xfbdfffff 64bit]
pci 0000:06:00.0: reg 18: [io 0xd800-0xd8ff]
pci 0000:06:00.0: reg 30: [mem 0xfbdc0000-0xfbddffff pref]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:00:1c.2: PCI bridge to [bus 06-06]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:05:00.0: reg 10: [io 0xcc00-0xcc07]
pci 0000:05:00.0: reg 14: [io 0xc880-0xc883]
pci 0000:05:00.0: reg 18: [io 0xc800-0xc807]
pci 0000:05:00.0: reg 1c: [io 0xc480-0xc483]
pci 0000:05:00.0: reg 20: [io 0xc400-0xc40f]
pci 0000:05:00.0: reg 24: [mem 0xfbcffc00-0xfbcfffff]
pci 0000:05:00.0: supports D1
pci 0000:05:00.0: PME# supported from D0 D1 D3hot
pci 0000:05:00.0: PME# disabled
pci 0000:00:1c.4: PCI bridge to [bus 05-05]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:04:00.0: reg 10: [mem 0xfbbfc000-0xfbbfffff 64bit]
pci 0000:04:00.0: reg 18: [io 0xb800-0xb8ff]
pci 0000:04:00.0: reg 30: [mem 0xfbbc0000-0xfbbdffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.5: bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:08:01.0: reg 10: [io 0xec00-0xec3f]
pci 0000:08:01.0: supports D2
pci 0000:08:02.0: reg 10: [mem 0xfbeff000-0xfbeff7ff]
pci 0000:08:02.0: reg 14: [io 0xe880-0xe8ff]
pci 0000:08:02.0: supports D2
pci 0000:08:02.0: PME# supported from D2 D3hot D3cold
pci 0000:08:02.0: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfbf00000-0xfbffffff] has been reserved
system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:01: [mem 0xfec8a000-0xfec8afff] could not be reserved
system 00:01: [mem 0xfed10000-0xfed10fff] has been reserved
system 00:06: [io 0x0290-0x029f] has been reserved
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: [io 0x0800-0x087f] has been reserved
system 00:07: [io 0x0500-0x057f] could not be reserved
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed40000-0xfed8ffff] has been reserved
system 00:0a: [mem 0xffc00000-0xffdfffff] has been reserved
system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0e: [mem 0x000c0000-0x000cffff] has been reserved
system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0e: [mem 0x00100000-0xbfffffff] could not be reserved
system 00:0e: [mem 0xfed90000-0xffffffff] could not be reserved
pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf03fffff]
pci 0000:00:1c.2: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
pci 0000:00:1c.4: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0800000-0xf09fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io disabled]
pci 0000:00:01.0: bridge window [mem disabled]
pci 0000:00:01.0: bridge window [mem pref disabled]
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0: bridge window [io 0xa000-0xafff]
pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbafffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:07.0: bridge window [io disabled]
pci 0000:00:07.0: bridge window [mem disabled]
pci 0000:00:07.0: bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI bridge to [bus 07-07]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf03fffff]
pci 0000:00:1c.0: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 06-06]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 05-05]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1c.4: bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.5: bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:00:1c.5: bridge window [mem 0xf0800000-0xf09fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 08-08]
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0106 -> 0107)
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xefff]
pci_bus 0000:00: resource 1 [mem 0xd0000000-0xfbffffff]
pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbafffff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:07: resource 1 [mem 0xf0000000-0xf03fffff]
pci_bus 0000:07: resource 2 [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:06: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:06: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:05: resource 1 [mem 0xfbc00000-0xfbcfffff]
pci_bus 0000:05: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:04: resource 1 [mem 0xfbb00000-0xfbbfffff]
pci_bus 0000:04: resource 2 [mem 0xf0800000-0xf09fffff 64bit pref]
pci_bus 0000:08: resource 0 [io 0xe000-0xefff]
pci_bus 0000:08: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:08: resource 3 [io 0x0000-0xefff]
pci_bus 0000:08: resource 4 [mem 0xd0000000-0xfbffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:02:00.0: Boot video device
PCI: CLS 256 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 9135k freed
DMA-API: preallocated 32768 debug entries
DMA-API: debugging enabled by kernel config
IOMMU 0xfbfff000: using Queued invalidation
IOMMU 0xfbffe000: using Queued invalidation
------------[ cut here ]------------
WARNING: at drivers/pci/intel-iommu.c:3776 init_dmars+0x32a/0x6ea()
Hardware name: System Product Name
Your BIOS is broken; DMA routed to ISOCH DMAR unit but no TLB space.
BIOS vendor: American Megatrends Inc.; Ver: 0704 ; Product Version: System Version
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.32-07387-gf3cae36 #5
Call Trace:
[<ffffffff8104b606>] warn_slowpath_common+0x7c/0x94
[<ffffffff8104b675>] warn_slowpath_fmt+0x41/0x43
[<ffffffff81b28275>] init_dmars+0x32a/0x6ea
[<ffffffff81b28893>] intel_iommu_init+0x25e/0x333
[<ffffffff81b0791a>] ? pci_iommu_init+0x0/0x47
[<ffffffff81b0793a>] pci_iommu_init+0x20/0x47
[<ffffffff8100207d>] do_one_initcall+0x72/0x18a
[<ffffffff81b006eb>] kernel_init+0x194/0x1ee
[<ffffffff8100ab8a>] child_rip+0xa/0x20
[<ffffffff81458dfd>] ? restore_args+0x0/0x30
[<ffffffff81b00557>] ? kernel_init+0x0/0x1ee
[<ffffffff8100ab80>] ? child_rip+0x0/0x20
---[ end trace 57f7151f6a5def05 ]---
IOMMU: hardware identity mapping for device 0000:00:1b.0
IOMMU: Setting RMRR:
IOMMU: Setting identity map for device 0000:00:1d.0 [0xbf7dc000 - 0xbf7dc000]
IOMMU: Setting identity map for device 0000:00:1d.1 [0xbf7dc000 - 0xbf7dc000]
IOMMU: Setting identity map for device 0000:00:1d.2 [0xbf7dc000 - 0xbf7dc000]
IOMMU: Setting identity map for device 0000:00:1d.7 [0xbf7dc000 - 0xbf7dc000]
IOMMU: Setting identity map for device 0000:00:1a.0 [0xbf7dc000 - 0xbf7dc000]
IOMMU: Setting identity map for device 0000:00:1a.1 [0xbf7dc000 - 0xbf7dc000]
IOMMU: Setting identity map for device 0000:00:1a.2 [0xbf7dc000 - 0xbf7dc000]
IOMMU: Setting identity map for device 0000:00:1a.7 [0xbf7dc000 - 0xbf7dc000]
IOMMU: Setting identity map for device 0000:00:1d.0 [0xec000 - 0xf0000]
IOMMU: Setting identity map for device 0000:00:1d.1 [0xec000 - 0xf0000]
IOMMU: Setting identity map for device 0000:00:1d.2 [0xec000 - 0xf0000]
IOMMU: Setting identity map for device 0000:00:1d.7 [0xec000 - 0xf0000]
IOMMU: Setting identity map for device 0000:00:1a.0 [0xec000 - 0xf0000]
IOMMU: Setting identity map for device 0000:00:1a.1 [0xec000 - 0xf0000]
IOMMU: Setting identity map for device 0000:00:1a.2 [0xec000 - 0xf0000]
IOMMU: Setting identity map for device 0000:00:1a.7 [0xec000 - 0xf0000]
IOMMU: Prepare 0-16MiB unity mapping for LPC
IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0x1000000]
PCI-DMA: Intel(R) Virtualization Technology for Directed I/O
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1261064906.890:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Btrfs loaded
msgmni has been set to 23934
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 50 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:01.0: irq 50 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
alloc irq_desc for 51 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:03.0: irq 51 for MSI/MSI-X
pcieport 0000:00:07.0: setting latency timer to 64
alloc irq_desc for 52 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:07.0: irq 52 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 53 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:1c.0: irq 53 for MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to 64
alloc irq_desc for 54 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:1c.2: irq 54 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
alloc irq_desc for 55 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:1c.4: irq 55 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
alloc irq_desc for 56 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:1c.5: irq 56 for MSI/MSI-X
aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
pci-stub: invalid id string ""
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: SSDT 00000000bf798200 01C0C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
ACPI: SSDT 00000000bf799e10 00659 (v01 PmRef P001Cst 00003001 INTL 20060113)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
processor LNXCPU:02: registered as cooling_device2
processor LNXCPU:03: registered as cooling_device3
processor LNXCPU:04: registered as cooling_device4
processor LNXCPU:05: registered as cooling_device5
processor LNXCPU:06: registered as cooling_device6
processor LNXCPU:07: registered as cooling_device7
Non-volatile memory driver v1.3
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
alloc irq_desc for 20 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
alloc irq_desc for 57 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ahci 0000:00:1f.2: irq 57 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc100 irq 57
ata2: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc180 irq 57
ata3: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc200 irq 57
ata4: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc280 irq 57
ata5: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc300 irq 57
ata6: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc380 irq 57
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf7fff000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-07387-gf3cae36 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7ffe000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-07387-gf3cae36 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-07387-gf3cae36 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
alloc irq_desc for 21 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-07387-gf3cae36 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009c00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-07387-gf3cae36 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009080
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32-07387-gf3cae36 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.32-07387-gf3cae36 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009480
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.32-07387-gf3cae36 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
Driver 'rtc_cmos' needs updating - please use bus_type methods
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
No TPM chip found, activating TPM-bypass!
Magic number: 5:692:841
rtc_cmos 00:03: setting system clock to 2009-12-17 15:48:28 UTC (1261064908)
Initalizing network drop monitor service
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
usb 1-5: new high speed USB device using ehci_hcd and address 2
usb 1-5: New USB device found, idVendor=0409, idProduct=005a
usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133
ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
usb 7-1: new full speed USB device using uhci_hcd and address 2
usb 7-1: New USB device found, idVendor=0733, idProduct=0430
usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133
ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 7-2: new low speed USB device using uhci_hcd and address 3
usb 7-2: New USB device found, idVendor=051d, idProduct=0002
usb 7-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 7-2: Product: Back-UPS ES 550 FW:843.K1d.D USB FW:K1d
usb 7-2: Manufacturer: APC
usb 7-2: SerialNumber: 3B1806X13792
generic-usb 0003:051D:0002.0001: hiddev96,hidraw0: USB HID v1.10 Device [APC Back-UPS ES 550 FW:843.K1d.D USB FW:K1d] on usb-0000:00:1d.1-2/input0
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133
ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 2:0:0:0: [sdc] Attached SCSI disk
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133
ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1
sd 3:0:0:0: [sdd] Attached SCSI disk
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-8: WDC WD10EADS-65L5B1, 01.01A01, max UDMA/133
ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA WDC WD10EADS-65L 01.0 PQ: 0 ANSI: 5
sd 4:0:0:0: Attached scsi generic sg4 type 0
sd 4:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sde: sde1
sd 4:0:0:0: [sde] Attached SCSI disk
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: ATA-8: WDC WD10EADS-65L5B1, 01.01A01, max UDMA/133
ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA WDC WD10EADS-65L 01.0 PQ: 0 ANSI: 5
sd 5:0:0:0: Attached scsi generic sg5 type 0
sd 5:0:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 5:0:0:0: [sdf] Write Protect is off
sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdf: sdf1
sd 5:0:0:0: [sdf] Attached SCSI disk
Freeing unused kernel memory: 1516k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1644k freed
Freeing unused kernel memory: 1868k freed
dracut: dracut-002-13.4.git8f397a9b.fc12
udev: starting version 147
Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
alloc irq_desc for 24 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
nouveau 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
nouveau 0000:02:00.0: setting latency timer to 64
[drm] nouveau 0000:02:00.0: Detected an NV50 generation card (0x450300a2)
[drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN
[drm] nouveau 0000:02:00.0: ... appears to be valid
[drm] nouveau 0000:02:00.0: BIT BIOS found
[drm] nouveau 0000:02:00.0: Bios version 60.80.18.00
[drm] nouveau 0000:02:00.0: TMDS table revision 2.0 not currently supported
[drm] nouveau 0000:02:00.0: BIT table 'd' not found
[drm] nouveau 0000:02:00.0: Found Display Configuration Block version 4.0
[drm] nouveau 0000:02:00.0: DCB connector table: VHER 0x40 5 14 2
[drm] nouveau 0000:02:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
[drm] nouveau 0000:02:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08
[drm] nouveau 0000:02:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
[drm] nouveau 0000:02:00.0: 3: 0x00000211: type 0x11 idx 2 tag 0xff
[drm] nouveau 0000:02:00.0: 4: 0x00000213: type 0x13 idx 2 tag 0xff
[drm] nouveau 0000:02:00.0: Raw DCB entry 0: 04000320 00000028
[drm] nouveau 0000:02:00.0: Raw DCB entry 1: 01000322 00000030
[drm] nouveau 0000:02:00.0: Raw DCB entry 2: 02011310 00000028
[drm] nouveau 0000:02:00.0: Raw DCB entry 3: 02011312 00000030
[drm] nouveau 0000:02:00.0: Raw DCB entry 4: 010223f1 00c1c020
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xBFB4
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xC1BF
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xD37B
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xD46A
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xD621
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table at offset 0xD686
[drm] nouveau 0000:02:00.0: 0xD686: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:02:00.0: 0xB284: parsing output script 0
[drm] nouveau 0000:02:00.0: 0xB284: parsing output script 0
[drm] nouveau 0000:02:00.0: 0xA8FA: parsing output script 0
[TTM] Zone kernel: Available graphics memory: 6129682 kiB.
[TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[drm] nouveau 0000:02:00.0: 320 MiB VRAM
[drm] nouveau 0000:02:00.0: 512 MiB GART (aperture)
nouveau 0000:02:00.0: firmware: requesting nouveau/nv50.ctxprog
dracut:
dracut: udevadm settle - timeout of 30 seconds reached, the event queue contains:
dracut: /sys/devices/pci0000:00/0000:00:03.0/0000:02:00.0 (938)
dracut: /sys/devices/pci0000:00/0000:00:03.0/0000:02:00.0/drm/controlD64 (1026)
dracut: /sys/devices/pci0000:00/0000:00:03.0/0000:02:00.0/drm/card0 (1027)
dracut: /sys/devices/pci0000:00/0000:00:03.0/0000:02:00.0/i2c-0 (1028)
dracut: Starting plymouth daemon
pata_marvell 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_marvell 0000:05:00.0: setting latency timer to 64
scsi6 : pata_marvell
scsi7 : pata_marvell
ata7: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 16
ata8: PATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 16
ata7.01: NODEV after polling detection
irq 16: nobody cared (try booting with the "irqpoll" option)
Pid: 0, comm: swapper Tainted: G W 2.6.32-07387-gf3cae36 #5
Call Trace:
<IRQ> [<ffffffff81096457>] __report_bad_irq+0x3d/0x8c
[<ffffffff810965be>] note_interrupt+0x118/0x17e
[<ffffffff81096cc1>] handle_fasteoi_irq+0x9c/0xc1
[<ffffffff8100c4a2>] handle_irq+0x24/0x2e
[<ffffffff8145db0c>] do_IRQ+0x5c/0xc3
[<ffffffff81458d93>] ret_from_intr+0x0/0x16
<EOI> [<ffffffff81458b9b>] ? _spin_unlock_irqrestore+0x3a/0x41
[<ffffffff81071b14>] clockevents_notify+0x85/0x8d
[<ffffffff812aee67>] lapic_timer_state_broadcast+0x46/0x48
[<ffffffff812af50a>] acpi_idle_enter_bm+0x276/0x28a
[<ffffffff813911d4>] cpuidle_idle_call+0x9e/0xfa
[<ffffffff81008c89>] cpu_idle+0xb4/0xf6
[<ffffffff81452195>] start_secondary+0x201/0x242
handlers:
[<ffffffff8133663a>] (usb_hcd_irq+0x0/0xa7)
[<ffffffff81322933>] (ata_sff_interrupt+0x0/0x96)
Disabling IRQ #16
ata7.00: ATAPI: HP DVD Writer 400, KH27, max UDMA/33
ata7.00: configured for UDMA/33
scsi 6:0:0:0: CD-ROM HP DVD Writer 400c KH27 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 6:0:0:0: Attached scsi CD-ROM sr0
sr 6:0:0:0: Attached scsi generic sg6 type 5
usb 4-1: new low speed USB device using uhci_hcd and address 2
usb 4-1: New USB device found, idVendor=046d, idProduct=c045
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: USB-PS/2 Optical Mouse
usb 4-1: Manufacturer: Logitech
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input3
generic-usb 0003:046D:C045.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.1-1/input0
[drm] nouveau 0000:02:00.0: No ctxprog for NV50
[drm] nouveau 0000:02:00.0: Allocating FIFO number 1
[drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 1
[drm] nouveau 0000:02:00.0: Detected a DAC output
[drm] nouveau 0000:02:00.0: Detected a TMDS output
[drm] nouveau 0000:02:00.0: Detected a DAC output
[drm] nouveau 0000:02:00.0: Detected a TMDS output
[drm] nouveau 0000:02:00.0: DCB encoder 1 unknown
[drm] nouveau 0000:02:00.0: Detected a DVI-I connector
[drm] nouveau 0000:02:00.0: Detected a DVI-I connector
[drm] nouveau 0000:02:00.0: allocated 1680x1050 fb: 0x40210000, bo ffff88032e4ab400
fb0: nouveaufb frame buffer device
registered panic notifier
[drm] Initialized nouveau 0.0.15 20090420 for 0000:02:00.0 on minor 0
dracut: Autoassembling MD Raid
md: md0 stopped.
md: bind<sdb1>
md: bind<sda1>
md: raid1 personality registered for level 1
md0: Warning: Device sda1 is misaligned
md0: Warning: Device sdb1 is misaligned
raid1: raid set md0 active with 2 out of 2 mirrors
md0: detected capacity change from 0 to 209649664
dracut: mdadm: /dev/md0 has been started with 2 drives.
md0: unknown partition table
md: md1 stopped.
md: bind<sdb2>
md: bind<sdc1>
md: bind<sdd1>
md: bind<sdf1>
md: bind<sde1>
md: bind<sda2>
async_tx: api initialized (async)
xor: automatically using best checksumming function: generic_sse
generic_sse: 9208.000 MB/sec
xor: using function: generic_sse (9208.000 MB/sec)
raid6: int64x1 2300 MB/s
raid6: int64x2 2570 MB/s
raid6: int64x4 2117 MB/s
raid6: int64x8 1589 MB/s
raid6: sse2x1 6226 MB/s
raid6: sse2x2 7167 MB/s
raid6: sse2x4 8046 MB/s
raid6: using algorithm sse2x4 (8046 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
raid5: device sda2 operational as raid disk 0
raid5: device sde1 operational as raid disk 5
raid5: device sdf1 operational as raid disk 4
raid5: device sdd1 operational as raid disk 3
raid5: device sdc1 operational as raid disk 2
raid5: device sdb2 operational as raid disk 1
raid5: allocated 6386kB for md1
0: w=1 pa=0 pr=6 m=2 a=2 r=6 op1=0 op2=0
5: w=2 pa=0 pr=6 m=2 a=2 r=6 op1=0 op2=0
4: w=3 pa=0 pr=6 m=2 a=2 r=6 op1=0 op2=0
3: w=4 pa=0 pr=6 m=2 a=2 r=6 op1=0 op2=0
2: w=5 pa=0 pr=6 m=2 a=2 r=6 op1=0 op2=0
1: w=6 pa=0 pr=6 m=2 a=2 r=6 op1=0 op2=0
raid5: raid level 6 set md1 active with 6 out of 6 devices, algorithm 2
RAID5 conf printout:
--- rd:6 wd:6
disk 0, o:1, dev:sda2
disk 1, o:1, dev:sdb2
disk 2, o:1, dev:sdc1
disk 3, o:1, dev:sdd1
disk 4, o:1, dev:sdf1
disk 5, o:1, dev:sde1
md1: Warning: Device sda2 is misaligned
md1: Warning: Device sde1 is misaligned
md1: Warning: Device sdf1 is misaligned
md1: Warning: Device sdd1 is misaligned
md1: Warning: Device sdc1 is misaligned
md1: Warning: Device sdb2 is misaligned
md1: detected capacity change from 0 to 3999969837056
dracut: mdadm: /dev/md1 has been started with 6 drives.
md1: unknown partition table
dracut: Scanning devices md1 for LVM volume groups
dracut: Reading all physical volumes. This may take a while...
dracut: Found volume group "vg_00" using metadata type lvm2
device-mapper: table: 253:0: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=524288196608
device-mapper: table: 253:0: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=524288196608
device-mapper: table: 253:1: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=542139154432
device-mapper: table: 253:1: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=542139154432
device-mapper: table: 253:2: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=646996754432
device-mapper: table: 253:2: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=646996754432
device-mapper: table: 253:3: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=655385362432
device-mapper: table: 253:3: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=655385362432
device-mapper: table: 253:4: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=672162578432
device-mapper: table: 253:4: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=672162578432
device-mapper: table: 253:5: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=680551186432
device-mapper: table: 253:5: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=680551186432
device-mapper: table: 253:6: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=732996763648
device-mapper: table: 253:6: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=732996763648
device-mapper: table: 253:7: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=749773979648
device-mapper: table: 253:7: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=749773979648
device-mapper: table: 253:8: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=1306274234368
device-mapper: table: 253:8: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=1306274234368
device-mapper: table: 253:9: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=196608
device-mapper: table: 253:9: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=196608
device-mapper: table: 253:10: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=1861063213056
device-mapper: table: 253:10: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=1861063213056
device-mapper: table: 253:11: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=1995280941056
device-mapper: table: 253:11: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=1995280941056
device-mapper: table: 253:12: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=2251301257216
device-mapper: table: 253:12: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=2251301257216
dracut: 13 logical volume(s) in volume group "vg_00" now active
dracut: Autoassembling MD Raid
EXT4-fs (dm-3): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/mapper/vg_00-LogVol02_root
dracut: Loading SELinux policy
type=1404 audit(1261064976.419:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 8192 avtab hash slots, 131435 rules.
SELinux: 8192 avtab hash slots, 131435 rules.
SELinux: 8 users, 12 roles, 2787 types, 129 bools, 1 sens, 1024 cats
SELinux: 74 classes, 131435 rules
SELinux: Permission module_request in class system not defined in policy.
SELinux: Class tun_socket not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-3, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1261064976.621:3): policy loaded auid=4294967295 ses=4294967295
dracut: Switching root
[drm] DAC-7: set mode 1680x1050 25
[drm] nouveau 0000:02:00.0: 0x0FA9: parsing clock script 0
[drm] nouveau 0000:02:00.0: GPU lockup - switching to software fbcon
Console: switching to colour frame buffer device 210x65
udev: starting version 147
sky2 driver version 1.26
sky2 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
sky2 0000:06:00.0: setting latency timer to 64
sky2 0000:06:00.0: Yukon-2 EC Ultra chip revision 3
alloc irq_desc for 58 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
sky2 0000:06:00.0: irq 58 for MSI/MSI-X
sky2 eth0: addr 00:26:18:00:1c:3b
sky2 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
sky2 0000:04:00.0: setting latency timer to 64
sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3
alloc irq_desc for 59 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
sky2 0000:04:00.0: irq 59 for MSI/MSI-X
sky2 eth1: addr 00:26:18:00:1c:3a
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI: WMI: Mapper loaded
input: PC Speaker as /devices/platform/pcspkr/input/input4
Linux video capture interface: v2.00
gspca: main v2.8.0 registered
firewire_ohci 0000:08:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
gspca: probing 0733:0430
firewire_ohci: Added fw-ohci device 0000:08:02.0, OHCI version 1.10
gspca: /dev/video0 created
usbcore: registered new interface driver spca505
spca505: registered
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
alloc irq_desc for 60 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
HDA Intel 0000:00:1b.0: irq 60 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
ENS1371 0000:08:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
firewire_core: created device fw0: GUID 001e8c0001e5e584, S400
hda_codec: AD1989B: BIOS auto-probing.
ALSA sound/pci/hda/hda_codec.c:4282: autoconfig: line_outs=4 (0x12/0x16/0x24/0x25/0x0)
ALSA sound/pci/hda/hda_codec.c:4286: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:4290: hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:4291: mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:4294: dig-out=0x1b/0x1d
ALSA sound/pci/hda/hda_codec.c:4302: inputs: mic=0x17, fmic=0x14, line=0x15, fline=0x0, cd=0x18, aux=0x0
gameport: ES137x is pci0000:08:01.0/gameport0, io 0x200, speed 663kHz
name_count maxed, losing inode data: dev=00:06, inode=12267
name_count maxed, losing inode data: dev=00:06, inode=12267
name_count maxed, losing inode data: dev=00:06, inode=12267
name_count maxed, losing inode data: dev=00:06, inode=12259
name_count maxed, losing inode data: dev=00:06, inode=12272
name_count maxed, losing inode data: dev=00:06, inode=12272
name_count maxed, losing inode data: dev=00:06, inode=12272
name_count maxed, losing inode data: dev=00:06, inode=12272
name_count maxed, losing inode data: dev=00:06, inode=12259
name_count maxed, losing inode data: dev=00:06, inode=12277
name_count maxed, losing inode data: dev=00:06, inode=12277
name_count maxed, losing inode data: dev=00:06, inode=12277
name_count maxed, losing inode data: dev=00:06, inode=12277
name_count maxed, losing inode data: dev=00:06, inode=12259
name_count maxed, losing inode data: dev=00:06, inode=12282
name_count maxed, losing inode data: dev=00:06, inode=12282
name_count maxed, losing inode data: dev=00:06, inode=12282
name_count maxed, losing inode data: dev=00:06, inode=12282
name_count maxed, losing inode data: dev=00:06, inode=12259
name_count maxed, losing inode data: dev=00:06, inode=12288
name_count maxed, losing inode data: dev=00:06, inode=12288
name_count maxed, losing inode data: dev=00:06, inode=12288
name_count maxed, losing inode data: dev=00:06, inode=12288
name_count maxed, losing inode data: dev=00:06, inode=12259
name_count maxed, losing inode data: dev=00:06, inode=12293
name_count maxed, losing inode data: dev=00:06, inode=12293
name_count maxed, losing inode data: dev=00:06, inode=12293
name_count maxed, losing inode data: dev=00:06, inode=12293
name_count maxed, losing inode data: dev=00:06, inode=12259
name_count maxed, losing inode data: dev=00:06, inode=12298
name_count maxed, losing inode data: dev=00:06, inode=12298
name_count maxed, losing inode data: dev=00:06, inode=12298
name_count maxed, losing inode data: dev=00:06, inode=12298
name_count maxed, losing inode data: dev=00:06, inode=12259
name_count maxed, losing inode data: dev=00:06, inode=12303
name_count maxed, losing inode data: dev=00:06, inode=12303
name_count maxed, losing inode data: dev=00:06, inode=12303
name_count maxed, losing inode data: dev=00:06, inode=12303
name_count maxed, losing inode data: dev=00:06, inode=12259
name_count maxed, losing inode data: dev=00:06, inode=12308
name_count maxed, losing inode data: dev=00:06, inode=12308
name_count maxed, losing inode data: dev=00:06, inode=12308
name_count maxed, losing inode data: dev=00:06, inode=12308
name_count maxed, losing inode data: dev=00:06, inode=12259
name_count maxed, losing inode data: dev=00:06, inode=12313
name_count maxed, losing inode data: dev=00:06, inode=12313
name_count maxed, losing inode data: dev=00:06, inode=12313
name_count maxed, losing inode data: dev=00:06, inode=12313
name_count maxed, losing inode data: dev=00:06, inode=12259
name_count maxed, losing inode data: dev=00:06, inode=12318
name_count maxed, losing inode data: dev=00:06, inode=12318
name_count maxed, losing inode data: dev=00:06, inode=12318
name_count maxed, losing inode data: dev=00:06, inode=12318
name_count maxed, losing inode data: dev=00:06, inode=12259
name_count maxed, losing inode data: dev=00:06, inode=12323
name_count maxed, losing inode data: dev=00:06, inode=12323
name_count maxed, losing inode data: dev=00:06, inode=12323
name_count maxed, losing inode data: dev=00:06, inode=12323
name_count maxed, losing inode data: dev=00:06, inode=12259
name_count maxed, losing inode data: dev=00:06, inode=12328
name_count maxed, losing inode data: dev=00:06, inode=12328
name_count maxed, losing inode data: dev=00:06, inode=12328
name_count maxed, losing inode data: dev=00:06, inode=12328
name_count maxed, losing inode data: dev=00:06, inode=12259
name_count maxed, losing inode data: dev=00:06, inode=12333
name_count maxed, losing inode data: dev=00:06, inode=12333
name_count maxed, losing inode data: dev=00:06, inode=12333
name_count maxed, losing inode data: dev=00:06, inode=12333
name_count maxed, losing inode data: dev=00:06, inode=12259
name_count maxed, losing inode data: dev=00:06, inode=12338
name_count maxed, losing inode data: dev=00:06, inode=12338
name_count maxed, losing inode data: dev=00:06, inode=12338
name_count maxed, losing inode data: dev=00:06, inode=12338
name_count maxed, losing inode data: dev=00:06, inode=12259
name_count maxed, losing inode data: dev=00:06, inode=12343
name_count maxed, losing inode data: dev=00:06, inode=12343
name_count maxed, losing inode data: dev=00:06, inode=12343
name_count maxed, losing inode data: dev=00:06, inode=12343
name_count maxed, losing inode data: dev=00:06, inode=12259
name_count maxed, losing inode data: dev=00:06, inode=12348
name_count maxed, losing inode data: dev=00:06, inode=12348
name_count maxed, losing inode data: dev=00:06, inode=12348
name_count maxed, losing inode data: dev=00:06, inode=12348
name_count maxed, losing inode data: dev=00:06, inode=12259
name_count maxed, losing inode data: dev=00:06, inode=12353
name_count maxed, losing inode data: dev=00:06, inode=12353
name_count maxed, losing inode data: dev=00:06, inode=12353
name_count maxed, losing inode data: dev=00:06, inode=12353
name_count maxed, losing inode data: dev=00:06, inode=12259
name_count maxed, losing inode data: dev=00:06, inode=12358
name_count maxed, losing inode data: dev=00:06, inode=12358
name_count maxed, losing inode data: dev=00:06, inode=12358
name_count maxed, losing inode data: dev=00:06, inode=12358
name_count maxed, losing inode data: dev=00:06, inode=12259
name_count maxed, losing inode data: dev=00:06, inode=12363
name_count maxed, losing inode data: dev=00:06, inode=12363
name_count maxed, losing inode data: dev=00:06, inode=12363
name_count maxed, losing inode data: dev=00:06, inode=12363
name_count maxed, losing inode data: dev=00:06, inode=12259
name_count maxed, losing inode data: dev=00:06, inode=12368
name_count maxed, losing inode data: dev=00:06, inode=12368
name_count maxed, losing inode data: dev=00:06, inode=12368
name_count maxed, losing inode data: dev=00:06, inode=12368
name_count maxed, losing inode data: dev=00:06, inode=12259
name_count maxed, losing inode data: dev=00:06, inode=12373
name_count maxed, losing inode data: dev=00:06, inode=12373
name_count maxed, losing inode data: dev=00:06, inode=12373
name_count maxed, losing inode data: dev=00:06, inode=12373
name_count maxed, losing inode data: dev=00:06, inode=12259
name_count maxed, losing inode data: dev=00:06, inode=12378
name_count maxed, losing inode data: dev=00:06, inode=12378
name_count maxed, losing inode data: dev=00:06, inode=12378
name_count maxed, losing inode data: dev=00:06, inode=12378
name_count maxed, losing inode data: dev=00:06, inode=201
name_count maxed, losing inode data: dev=00:06, inode=12383
name_count maxed, losing inode data: dev=00:06, inode=12383
name_count maxed, losing inode data: dev=00:06, inode=12383
name_count maxed, losing inode data: dev=00:06, inode=12386
name_count maxed, losing inode data: dev=00:06, inode=12386
name_count maxed, losing inode data: dev=00:06, inode=12386
name_count maxed, losing inode data: dev=00:06, inode=12386
name_count maxed, losing inode data: dev=00:06, inode=12383
name_count maxed, losing inode data: dev=00:06, inode=12391
name_count maxed, losing inode data: dev=00:06, inode=12391
name_count maxed, losing inode data: dev=00:06, inode=12391
name_count maxed, losing inode data: dev=00:06, inode=12391
name_count maxed, losing inode data: dev=00:06, inode=12383
name_count maxed, losing inode data: dev=00:06, inode=12396
name_count maxed, losing inode data: dev=00:06, inode=12396
name_count maxed, losing inode data: dev=00:06, inode=12396
name_count maxed, losing inode data: dev=00:06, inode=12396
name_count maxed, losing inode data: dev=00:06, inode=12383
name_count maxed, losing inode data: dev=00:06, inode=12401
name_count maxed, losing inode data: dev=00:06, inode=12401
name_count maxed, losing inode data: dev=00:06, inode=12401
name_count maxed, losing inode data: dev=00:06, inode=12401
name_count maxed, losing inode data: dev=00:06, inode=12383
name_count maxed, losing inode data: dev=00:06, inode=12406
name_count maxed, losing inode data: dev=00:06, inode=12406
name_count maxed, losing inode data: dev=00:06, inode=12406
name_count maxed, losing inode data: dev=00:06, inode=12406
name_count maxed, losing inode data: dev=00:06, inode=12383
name_count maxed, losing inode data: dev=00:06, inode=12411
name_count maxed, losing inode data: dev=00:06, inode=12411
name_count maxed, losing inode data: dev=00:06, inode=12411
name_count maxed, losing inode data: dev=00:06, inode=12411
name_count maxed, losing inode data: dev=00:06, inode=12383
name_count maxed, losing inode data: dev=00:06, inode=12416
name_count maxed, losing inode data: dev=00:06, inode=12416
name_count maxed, losing inode data: dev=00:06, inode=12416
name_count maxed, losing inode data: dev=00:06, inode=12416
name_count maxed, losing inode data: dev=00:06, inode=12383
name_count maxed, losing inode data: dev=00:06, inode=12421
name_count maxed, losing inode data: dev=00:06, inode=12421
name_count maxed, losing inode data: dev=00:06, inode=12421
name_count maxed, losing inode data: dev=00:06, inode=12421
name_count maxed, losing inode data: dev=00:06, inode=12383
name_count maxed, losing inode data: dev=00:06, inode=12426
name_count maxed, losing inode data: dev=00:06, inode=12426
name_count maxed, losing inode data: dev=00:06, inode=12426
name_count maxed, losing inode data: dev=00:06, inode=12426
name_count maxed, losing inode data: dev=00:06, inode=12432
name_count maxed, losing inode data: dev=00:06, inode=12432
name_count maxed, losing inode data: dev=00:06, inode=12432
name_count maxed, losing inode data: dev=00:06, inode=12432
name_count maxed, losing inode data: dev=00:06, inode=12432
name_count maxed, losing inode data: dev=00:06, inode=12432
name_count maxed, losing inode data: dev=00:06, inode=12432
name_count maxed, losing inode data: dev=00:06, inode=12432
name_count maxed, losing inode data: dev=00:06, inode=12432
name_count maxed, losing inode data: dev=00:06, inode=12432
name_count maxed, losing inode data: dev=00:06, inode=12432
name_count maxed, losing inode data: dev=00:06, inode=12432
name_count maxed, losing inode data: dev=00:06, inode=12432
name_count maxed, losing inode data: dev=00:06, inode=12432
name_count maxed, losing inode data: dev=00:06, inode=12432
name_count maxed, losing inode data: dev=00:06, inode=12432
name_count maxed, losing inode data: dev=00:06, inode=12432
name_count maxed, losing inode data: dev=00:06, inode=12432
name_count maxed, losing inode data: dev=00:06, inode=12432
name_count maxed, losing inode data: dev=00:06, inode=12432
name_count maxed, losing inode data: dev=00:06, inode=12432
name_count maxed, losing inode data: dev=00:06, inode=12432
name_count maxed, losing inode data: dev=00:06, inode=12432
device-mapper: multipath: version 1.1.0 loaded
EXT4-fs (dm-6): mounted filesystem with ordered data mode
SELinux: initialized (dev dm-6, type ext4), uses xattr
EXT4-fs (dm-1): mounted filesystem with ordered data mode
SELinux: initialized (dev dm-1, type ext4), uses xattr
EXT4-fs (dm-5): mounted filesystem with ordered data mode
SELinux: initialized (dev dm-5, type ext4), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3-fs (md0): using internal journal
EXT3-fs (md0): mounted filesystem with ordered data mode
SELinux: initialized (dev md0, type ext3), uses xattr
EXT4-fs (dm-7): mounted filesystem with ordered data mode
SELinux: initialized (dev dm-7, type ext4), uses xattr
EXT4-fs (dm-8): mounted filesystem with ordered data mode
SELinux: initialized (dev dm-8, type ext4), uses xattr
EXT4-fs (dm-4): mounted filesystem with ordered data mode
SELinux: initialized (dev dm-4, type ext4), uses xattr
EXT4-fs (dm-2): mounted filesystem with ordered data mode
SELinux: initialized (dev dm-2, type ext4), uses xattr
device fsid 834fc529ea4ea2c5-f9308b94bfd9cac devid 1 transid 23185 /dev/mapper/vg_00-kvm_guest_btrfs_test
SELinux: initialized (dev dm-9, type btrfs), uses xattr
EXT4-fs (dm-10): mounted filesystem with ordered data mode
SELinux: initialized (dev dm-10, type ext4), uses xattr
Adding 17432568k swap on /dev/mapper/vg_00-LogVol00_swap. Priority:-1 extents:1 across:17432568k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-07387-gf3cae36 (mbreuer@xxxxxxxxxxxxxxx) (gcc version 4.4.2 20091027 (Red Hat 4.4.2-7) (GCC) ) #5 SMP Mon Dec 14 12:13:51 EST 2009
Command line: ro root=/dev/mapper/vg_00-LogVol02_root usbcore.autosuspend=1 crashkernel=128M SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us pcie_aspm=force intel_iommu=igfx_off
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009cc00 (usable)
BIOS-e820: 000000000009cc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4c00 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bf780000 (usable)
BIOS-e820: 00000000bf780000 - 00000000bf798000 (ACPI data)
BIOS-e820: 00000000bf798000 - 00000000bf7dc000 (ACPI NVS)
BIOS-e820: 00000000bf7dc000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000340000000 (usable)
NX (Execute Disable) protection: active
DMI 2.5 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x340000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E3FFF write-protect
E4000-EBFFF write-through
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 200000000 mask F00000000 write-back
2 base 300000000 mask FC0000000 write-back
3 base 0C0000000 mask FC0000000 uncachable
4 base 0BF800000 mask FFF800000 uncachable
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 8GB, type WB
reg 1, base: 8GB, range: 4GB, type WB
reg 2, base: 12GB, range: 1GB, type WB
reg 3, base: 3GB, range: 1GB, type UC
reg 4, base: 3064MB, range: 8MB, type UC
total RAM covered: 12280M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3064MB, range: 8MB, type UC
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 4GB, type WB
reg 5, base: 12GB, range: 1GB, type WB
e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbf780 max_arch_pfn = 0x400000000
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009cc00 (usable)
modified: 000000000009cc00 - 00000000000a0000 (reserved)
modified: 00000000000e4c00 - 0000000000100000 (reserved)
modified: 0000000000100000 - 00000000bf780000 (usable)
modified: 00000000bf780000 - 00000000bf798000 (ACPI data)
modified: 00000000bf798000 - 00000000bf7dc000 (ACPI NVS)
modified: 00000000bf7dc000 - 00000000c0000000 (reserved)
modified: 00000000fee00000 - 00000000fee01000 (reserved)
modified: 00000000ffe00000 - 0000000100000000 (reserved)
modified: 0000000100000000 - 0000000340000000 (usable)
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000bf780000
0000000000 - 00bf600000 page 2M
00bf600000 - 00bf780000 page 4k
kernel direct mapping tables up to bf780000 @ 14000-19000
init_memory_mapping: 0000000100000000-0000000340000000
0100000000 - 0340000000 page 2M
kernel direct mapping tables up to 340000000 @ 17000-25000
RAMDISK: 37704000 - 37fefe8a
Reserving 128MB of memory at 32MB for crashkernel (System RAM: 13312MB)
ACPI: RSDP 00000000000fb1a0 00024 (v02 ACPIAM)
ACPI: XSDT 00000000bf780100 00064 (v01 111209 XSDT1642 20091112 MSFT 00000097)
ACPI: FACP 00000000bf780290 000F4 (v03 111209 FACP1642 20091112 MSFT 00000097)
ACPI: DSDT 00000000bf7804b0 0B66D (v01 A1265 A1265001 00000001 INTL 20060113)
ACPI: FACS 00000000bf798000 00040
ACPI: APIC 00000000bf780390 000D8 (v01 111209 APIC1642 20091112 MSFT 00000097)
ACPI: MCFG 00000000bf780470 0003C (v01 111209 OEMMCFG 20091112 MSFT 00000097)
ACPI: OEMB 00000000bf798040 00072 (v01 111209 OEMB1642 20091112 MSFT 00000097)
ACPI: HPET 00000000bf78f4b0 00038 (v01 111209 OEMHPET 20091112 MSFT 00000097)
ACPI: DMAR 00000000bf7980c0 00138 (v01 AMI OEMDMAR 00000001 MSFT 00000097)
ACPI: OSFR 00000000bf78f4f0 000B0 (v01 111209 OEMOSFR 20091112 MSFT 00000097)
ACPI: SSDT 00000000bf79a470 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
ACPI: Local APIC address 0xfee00000
found SMP MP-table at [ffff8800000ff780] ff780
No NUMA configuration found
Faking a node at 0000000000000000-0000000340000000
Bootmem setup node 0 0000000000000000-0000000340000000
NODE_DATA [0000000000020000 - 0000000000034fff]
bootmap [0000000000100000 - 0000000000167fff] pages 68
(14 early reservations) ==> bootmem [0000000000 - 0340000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0001da28e0] TEXT DATA BSS ==> [0001000000 - 0001da28e0]
#3 [0037704000 - 0037fefe8a] RAMDISK ==> [0037704000 - 0037fefe8a]
#4 [0001da3000 - 0001da3294] BRK ==> [0001da3000 - 0001da3294]
#5 [0000010000 - 0000014000] ACPI WAKEUP ==> [0000010000 - 0000014000]
#6 [0000014000 - 0000017000] PGTABLE ==> [0000014000 - 0000017000]
#7 [0000017000 - 0000020000] PGTABLE ==> [0000017000 - 0000020000]
#8 [0002000000 - 000a000000] CRASH KERNEL ==> [0002000000 - 000a000000]
#9 [00000ff790 - 0000100000] BIOS reserved ==> [00000ff790 - 0000100000]
#10 [00000ff780 - 00000ff790] MP-table mpf ==> [00000ff780 - 00000ff790]
#11 [000009cc00 - 00000f1300] BIOS reserved ==> [000009cc00 - 00000f1300]
#12 [00000f14c4 - 00000ff780] BIOS reserved ==> [00000f14c4 - 00000ff780]
#13 [00000f1300 - 00000f14c4] MP-table mpc ==> [00000f1300 - 00000f14c4]
[ffffea0000000000-ffffea000b5fffff] PMD -> [ffff880028600000-ffff880032dfffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00340000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009c
0: 0x00000100 -> 0x000bf780
0: 0x00100000 -> 0x00340000
On node 0 totalpages: 3143436
DMA zone: 56 pages used for memmap
DMA zone: 117 pages reserved
DMA zone: 3807 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 765880 pages, LIFO batch:31
Normal zone: 32256 pages used for memmap
Normal zone: 2327040 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 16 CPUs, 8 hotplug CPUs
nr_irqs_gsi: 48
Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff880028200000 s90456 r8192 d24232 u131072
pcpu-alloc: s90456 r8192 d24232 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3096727
Policy zone: Normal
Kernel command line: ro root=/dev/mapper/vg_00-LogVol02_root usbcore.autosuspend=1 crashkernel=128M SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us pcie_aspm=force intel_iommu=igfx_off
PCIe ASPM is forcedly enabled
Intel-IOMMU: disable GFX device mapping
PID hash table entries: 4096 (order: 3, 32768 bytes)
Initializing CPU#0
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 12179248k/13631488k available (4479k kernel code, 1057744k absent, 394496k reserved, 6685k data, 1516k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is enabled.
NR_IRQS:4352 nr_irqs:944
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 125829120 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2672.883 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5345.76 BogoMIPS (lpj=2672883)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU 0/0x0 -> Node 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 SHD:8
using mwait in idle threads.
Performance Events: Nehalem/Corei7 events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
ACPI: Core revision 20091112
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21989 entries in 87 pages
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fbfff000 flags: 0x0
IOMMU fbfff000: ver 1:0 cap c9008010e60262 ecap f0207a
DMAR: DRHD base: 0x000000fbffe000 flags: 0x1
IOMMU fbffe000: ver 1:0 cap c90780106f0462 ecap f020fe
DMAR: RMRR base: 0x000000000ec000 end: 0x000000000effff
DMAR: RMRR base: 0x000000bf7dc000 end: 0x000000bf7dbfff
DMAR: ATSR flags: 0x0
IOAPIC id 8 under DRHD base 0xfbffe000
IOAPIC id 9 under DRHD base 0xfbffe000
Enabled Interrupt-remapping
Setting APIC routing to flat
alloc irq_desc for 48 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 49 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
Booting processor 1 APIC 0x2 ip 0x6000
Initializing CPU#1
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU 1/0x2 -> Node 0
CPU1: Thermal monitoring enabled (TM1)
CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
CPU1: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
Booting processor 2 APIC 0x4 ip 0x6000
Initializing CPU#2
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU 2/0x4 -> Node 0
CPU2: Thermal monitoring enabled (TM1)
CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
CPU2: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
Booting processor 3 APIC 0x6 ip 0x6000
Initializing CPU#3
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU 3/0x6 -> Node 0
CPU3: Thermal monitoring enabled (TM1)
CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
CPU3: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
Booting processor 4 APIC 0x1 ip 0x6000
Initializing CPU#4
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU 4/0x1 -> Node 0
CPU4: Thermal monitoring enabled (TM1)
CPU 4 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU4: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
Booting processor 5 APIC 0x3 ip 0x6000
Initializing CPU#5
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU 5/0x3 -> Node 0
CPU5: Thermal monitoring enabled (TM1)
CPU 5 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU5: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
Booting processor 6 APIC 0x5 ip 0x6000
Initializing CPU#6
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU 6/0x5 -> Node 0
CPU6: Thermal monitoring enabled (TM1)
CPU 6 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU6: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
Booting processor 7 APIC 0x7 ip 0x6000
Initializing CPU#7
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU 7/0x7 -> Node 0
CPU7: Thermal monitoring enabled (TM1)
CPU 7 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU7: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
Brought up 8 CPUs
Total of 8 processors activated (42725.71 BogoMIPS).
regulator: core version 0.5
Time: 17:50:33 Date: 12/14/09
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff] (ignored)
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
IOH bus: [00, fb]
IOH bus: 00 index 0 io port: [0, efff]
IOH bus: 00 index 1 mmio: [d0000000, fbffffff]
pci 0000:00:1a.0: reg 20: [io 0x9800-0x981f]
pci 0000:00:1a.1: reg 20: [io 0x9880-0x989f]
pci 0000:00:1a.2: reg 20: [io 0x9c00-0x9c1f]
pci 0000:00:1a.7: reg 10: [mem 0xf7fff000-0xf7fff3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xf7ff8000-0xf7ffbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0x9080-0x909f]
pci 0000:00:1d.1: reg 20: [io 0x9400-0x941f]
pci 0000:00:1d.2: reg 20: [io 0x9480-0x949f]
pci 0000:00:1d.7: reg 10: [mem 0xf7ffe000-0xf7ffe3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f)
pci 0000:00:1f.2: reg 10: [io 0x8c00-0x8c07]
pci 0000:00:1f.2: reg 14: [io 0x8880-0x8883]
pci 0000:00:1f.2: reg 18: [io 0x8800-0x8807]
pci 0000:00:1f.2: reg 1c: [io 0x8480-0x8483]
pci 0000:00:1f.2: reg 20: [io 0x8400-0x841f]
pci 0000:00:1f.2: reg 24: [mem 0xf7ffc000-0xf7ffc7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xf7ffd000-0xf7ffd0ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
PCI: peer root bus 00 res updated from pci conf
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:02:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
pci 0000:02:00.0: reg 24: [io 0xac00-0xac7f]
pci 0000:02:00.0: reg 30: [mem 0xfbae0000-0xfbafffff pref]
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0: bridge window [io 0xa000-0xafff]
pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbafffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:1c.0: PCI bridge to [bus 07-07]
pci 0000:00:1c.0: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci 0000:06:00.0: reg 10: [mem 0xfbdfc000-0xfbdfffff 64bit]
pci 0000:06:00.0: reg 18: [io 0xd800-0xd8ff]
pci 0000:06:00.0: reg 30: [mem 0xfbdc0000-0xfbddffff pref]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:00:1c.2: PCI bridge to [bus 06-06]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:05:00.0: reg 10: [io 0xcc00-0xcc07]
pci 0000:05:00.0: reg 14: [io 0xc880-0xc883]
pci 0000:05:00.0: reg 18: [io 0xc800-0xc807]
pci 0000:05:00.0: reg 1c: [io 0xc480-0xc483]
pci 0000:05:00.0: reg 20: [io 0xc400-0xc40f]
pci 0000:05:00.0: reg 24: [mem 0xfbcffc00-0xfbcfffff]
pci 0000:05:00.0: supports D1
pci 0000:05:00.0: PME# supported from D0 D1 D3hot
pci 0000:05:00.0: PME# disabled
pci 0000:00:1c.4: PCI bridge to [bus 05-05]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:04:00.0: reg 10: [mem 0xfbbfc000-0xfbbfffff 64bit]
pci 0000:04:00.0: reg 18: [io 0xb800-0xb8ff]
pci 0000:04:00.0: reg 30: [mem 0xfbbc0000-0xfbbdffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.5: bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:08:01.0: reg 10: [io 0xec00-0xec3f]
pci 0000:08:01.0: supports D2
pci 0000:08:02.0: reg 10: [mem 0xfbeff000-0xfbeff7ff]
pci 0000:08:02.0: reg 14: [io 0xe880-0xe8ff]
pci 0000:08:02.0: supports D2
pci 0000:08:02.0: PME# supported from D2 D3hot D3cold
pci 0000:08:02.0: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfbf00000-0xfbffffff] has been reserved
system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:01: [mem 0xfec8a000-0xfec8afff] could not be reserved
system 00:01: [mem 0xfed10000-0xfed10fff] has been reserved
system 00:06: [io 0x0290-0x029f] has been reserved
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: [io 0x0800-0x087f] has been reserved
system 00:07: [io 0x0500-0x057f] could not be reserved
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed40000-0xfed8ffff] has been reserved
system 00:0a: [mem 0xffc00000-0xffdfffff] has been reserved
system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0e: [mem 0x000c0000-0x000cffff] has been reserved
system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0e: [mem 0x00100000-0xbfffffff] could not be reserved
system 00:0e: [mem 0xfed90000-0xffffffff] could not be reserved
pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf03fffff]
pci 0000:00:1c.2: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
pci 0000:00:1c.4: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0800000-0xf09fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io disabled]
pci 0000:00:01.0: bridge window [mem disabled]
pci 0000:00:01.0: bridge window [mem pref disabled]
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0: bridge window [io 0xa000-0xafff]
pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbafffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:07.0: bridge window [io disabled]
pci 0000:00:07.0: bridge window [mem disabled]
pci 0000:00:07.0: bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI bridge to [bus 07-07]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf03fffff]
pci 0000:00:1c.0: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 06-06]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 05-05]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1c.4: bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.5: bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:00:1c.5: bridge window [mem 0xf0800000-0xf09fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 08-08]
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0106 -> 0107)
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xefff]
pci_bus 0000:00: resource 1 [mem 0xd0000000-0xfbffffff]
pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbafffff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:07: resource 1 [mem 0xf0000000-0xf03fffff]
pci_bus 0000:07: resource 2 [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:06: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:06: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:05: resource 1 [mem 0xfbc00000-0xfbcfffff]
pci_bus 0000:05: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:04: resource 1 [mem 0xfbb00000-0xfbbfffff]
pci_bus 0000:04: resource 2 [mem 0xf0800000-0xf09fffff 64bit pref]
pci_bus 0000:08: resource 0 [io 0xe000-0xefff]
pci_bus 0000:08: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:08: resource 3 [io 0x0000-0xefff]
pci_bus 0000:08: resource 4 [mem 0xd0000000-0xfbffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:02:00.0: Boot video device
PCI: CLS 256 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 9135k freed
DMA-API: preallocated 32768 debug entries
DMA-API: debugging enabled by kernel config
IOMMU 0xfbfff000: using Queued invalidation
IOMMU 0xfbffe000: using Queued invalidation
------------[ cut here ]------------
WARNING: at drivers/pci/intel-iommu.c:3776 init_dmars+0x32a/0x6ea()
Hardware name: System Product Name
Your BIOS is broken; DMA routed to ISOCH DMAR unit but no TLB space.
BIOS vendor: American Megatrends Inc.; Ver: 0704 ; Product Version: System Version
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.32-07387-gf3cae36 #5
Call Trace:
[<ffffffff8104b606>] warn_slowpath_common+0x7c/0x94
[<ffffffff8104b675>] warn_slowpath_fmt+0x41/0x43
[<ffffffff81b28275>] init_dmars+0x32a/0x6ea
[<ffffffff81b28893>] intel_iommu_init+0x25e/0x333
[<ffffffff81b0791a>] ? pci_iommu_init+0x0/0x47
[<ffffffff81b0793a>] pci_iommu_init+0x20/0x47
[<ffffffff8100207d>] do_one_initcall+0x72/0x18a
[<ffffffff81b006eb>] kernel_init+0x194/0x1ee
[<ffffffff8100ab8a>] child_rip+0xa/0x20
[<ffffffff81458dfd>] ? restore_args+0x0/0x30
[<ffffffff81b00557>] ? kernel_init+0x0/0x1ee
[<ffffffff8100ab80>] ? child_rip+0x0/0x20
---[ end trace 57f7151f6a5def05 ]---
IOMMU: hardware identity mapping for device 0000:00:1b.0
IOMMU: Setting RMRR:
IOMMU: Setting identity map for device 0000:00:1d.0 [0xbf7dc000 - 0xbf7dc000]
IOMMU: Setting identity map for device 0000:00:1d.1 [0xbf7dc000 - 0xbf7dc000]
IOMMU: Setting identity map for device 0000:00:1d.2 [0xbf7dc000 - 0xbf7dc000]
IOMMU: Setting identity map for device 0000:00:1d.7 [0xbf7dc000 - 0xbf7dc000]
IOMMU: Setting identity map for device 0000:00:1a.0 [0xbf7dc000 - 0xbf7dc000]
IOMMU: Setting identity map for device 0000:00:1a.1 [0xbf7dc000 - 0xbf7dc000]
IOMMU: Setting identity map for device 0000:00:1a.2 [0xbf7dc000 - 0xbf7dc000]
IOMMU: Setting identity map for device 0000:00:1a.7 [0xbf7dc000 - 0xbf7dc000]
IOMMU: Setting identity map for device 0000:00:1d.0 [0xec000 - 0xf0000]
IOMMU: Setting identity map for device 0000:00:1d.1 [0xec000 - 0xf0000]
IOMMU: Setting identity map for device 0000:00:1d.2 [0xec000 - 0xf0000]
IOMMU: Setting identity map for device 0000:00:1d.7 [0xec000 - 0xf0000]
IOMMU: Setting identity map for device 0000:00:1a.0 [0xec000 - 0xf0000]
IOMMU: Setting identity map for device 0000:00:1a.1 [0xec000 - 0xf0000]
IOMMU: Setting identity map for device 0000:00:1a.2 [0xec000 - 0xf0000]
IOMMU: Setting identity map for device 0000:00:1a.7 [0xec000 - 0xf0000]
IOMMU: Prepare 0-16MiB unity mapping for LPC
IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0x1000000]
PCI-DMA: Intel(R) Virtualization Technology for Directed I/O
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1260813032.892:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Btrfs loaded
msgmni has been set to 23934
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 50 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:01.0: irq 50 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
alloc irq_desc for 51 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:03.0: irq 51 for MSI/MSI-X
pcieport 0000:00:07.0: setting latency timer to 64
alloc irq_desc for 52 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:07.0: irq 52 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 53 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:1c.0: irq 53 for MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to 64
alloc irq_desc for 54 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:1c.2: irq 54 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
alloc irq_desc for 55 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:1c.4: irq 55 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
alloc irq_desc for 56 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:1c.5: irq 56 for MSI/MSI-X
aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
pci-stub: invalid id string ""
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: SSDT 00000000bf798200 01C0C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
ACPI: SSDT 00000000bf799e10 00659 (v01 PmRef P001Cst 00003001 INTL 20060113)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
processor LNXCPU:02: registered as cooling_device2
processor LNXCPU:03: registered as cooling_device3
processor LNXCPU:04: registered as cooling_device4
processor LNXCPU:05: registered as cooling_device5
processor LNXCPU:06: registered as cooling_device6
processor LNXCPU:07: registered as cooling_device7
Non-volatile memory driver v1.3
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
alloc irq_desc for 20 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
alloc irq_desc for 57 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ahci 0000:00:1f.2: irq 57 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc100 irq 57
ata2: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc180 irq 57
ata3: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc200 irq 57
ata4: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc280 irq 57
ata5: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc300 irq 57
ata6: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc380 irq 57
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf7fff000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-07387-gf3cae36 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7ffe000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-07387-gf3cae36 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-07387-gf3cae36 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
alloc irq_desc for 21 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-07387-gf3cae36 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009c00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-07387-gf3cae36 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009080
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32-07387-gf3cae36 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.32-07387-gf3cae36 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009480
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.32-07387-gf3cae36 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
Driver 'rtc_cmos' needs updating - please use bus_type methods
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
No TPM chip found, activating TPM-bypass!
Magic number: 5:679:845
rtc_cmos 00:03: setting system clock to 2009-12-14 17:50:33 UTC (1260813033)
Initalizing network drop monitor service
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
usb 1-5: new high speed USB device using ehci_hcd and address 2
usb 1-5: New USB device found, idVendor=0409, idProduct=005a
usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133
ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
usb 7-1: new full speed USB device using uhci_hcd and address 2
usb 7-1: New USB device found, idVendor=0733, idProduct=0430
usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 7-2: new low speed USB device using uhci_hcd and address 3
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133
ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 7-2: New USB device found, idVendor=051d, idProduct=0002
usb 7-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 7-2: Product: Back-UPS ES 550 FW:843.K1d.D USB FW:K1d
usb 7-2: Manufacturer: APC
usb 7-2: SerialNumber: 3B1806X13792
generic-usb 0003:051D:0002.0001: hiddev96,hidraw0: USB HID v1.10 Device [APC Back-UPS ES 550 FW:843.K1d.D USB FW:K1d] on usb-0000:00:1d.1-2/input0
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133
ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 2:0:0:0: [sdc] Attached SCSI disk
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133
ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1
sd 3:0:0:0: [sdd] Attached SCSI disk
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-8: WDC WD10EADS-65L5B1, 01.01A01, max UDMA/133
ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA WDC WD10EADS-65L 01.0 PQ: 0 ANSI: 5
sd 4:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 4:0:0:0: Attached scsi generic sg4 type 0
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sde: sde1
sd 4:0:0:0: [sde] Attached SCSI disk
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: ATA-8: WDC WD10EADS-65L5B1, 01.01A01, max UDMA/133
ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA WDC WD10EADS-65L 01.0 PQ: 0 ANSI: 5
sd 5:0:0:0: Attached scsi generic sg5 type 0
sd 5:0:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 5:0:0:0: [sdf] Write Protect is off
sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdf: sdf1
sd 5:0:0:0: [sdf] Attached SCSI disk
Freeing unused kernel memory: 1516k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1644k freed
Freeing unused kernel memory: 1868k freed
dracut: dracut-002-13.4.git8f397a9b.fc12
udev: starting version 147
Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
alloc irq_desc for 24 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
nouveau 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
nouveau 0000:02:00.0: setting latency timer to 64
[drm] nouveau 0000:02:00.0: Detected an NV50 generation card (0x450300a2)
[drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN
[drm] nouveau 0000:02:00.0: ... appears to be valid
[drm] nouveau 0000:02:00.0: BIT BIOS found
[drm] nouveau 0000:02:00.0: Bios version 60.80.18.00
[drm] nouveau 0000:02:00.0: TMDS table revision 2.0 not currently supported
[drm] nouveau 0000:02:00.0: BIT table 'd' not found
[drm] nouveau 0000:02:00.0: Found Display Configuration Block version 4.0
[drm] nouveau 0000:02:00.0: DCB connector table: VHER 0x40 5 14 2
[drm] nouveau 0000:02:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
[drm] nouveau 0000:02:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08
[drm] nouveau 0000:02:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
[drm] nouveau 0000:02:00.0: 3: 0x00000211: type 0x11 idx 2 tag 0xff
[drm] nouveau 0000:02:00.0: 4: 0x00000213: type 0x13 idx 2 tag 0xff
[drm] nouveau 0000:02:00.0: Raw DCB entry 0: 04000320 00000028
[drm] nouveau 0000:02:00.0: Raw DCB entry 1: 01000322 00000030
[drm] nouveau 0000:02:00.0: Raw DCB entry 2: 02011310 00000028
[drm] nouveau 0000:02:00.0: Raw DCB entry 3: 02011312 00000030
[drm] nouveau 0000:02:00.0: Raw DCB entry 4: 010223f1 00c1c020
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xBFB4
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xC1BF
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xD37B
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xD46A
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xD621
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table at offset 0xD686
[drm] nouveau 0000:02:00.0: 0xD686: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:02:00.0: 0xB284: parsing output script 0
[drm] nouveau 0000:02:00.0: 0xB284: parsing output script 0
[drm] nouveau 0000:02:00.0: 0xA8FA: parsing output script 0
[TTM] Zone kernel: Available graphics memory: 6129682 kiB.
[TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[drm] nouveau 0000:02:00.0: 320 MiB VRAM
[drm] nouveau 0000:02:00.0: 512 MiB GART (aperture)
nouveau 0000:02:00.0: firmware: requesting nouveau/nv50.ctxprog
dracut:
dracut: udevadm settle - timeout of 30 seconds reached, the event queue contains:
dracut: /sys/devices/pci0000:00/0000:00:03.0/0000:02:00.0 (938)
dracut: /sys/devices/pci0000:00/0000:00:03.0/0000:02:00.0/drm/controlD64 (1026)
dracut: /sys/devices/pci0000:00/0000:00:03.0/0000:02:00.0/drm/card0 (1027)
dracut: /sys/devices/pci0000:00/0000:00:03.0/0000:02:00.0/i2c-0 (1028)
dracut: Starting plymouth daemon
pata_marvell 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_marvell 0000:05:00.0: setting latency timer to 64
scsi6 : pata_marvell
scsi7 : pata_marvell
ata7: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 16
ata8: PATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 16
ata7.01: NODEV after polling detection
irq 16: nobody cared (try booting with the "irqpoll" option)
Pid: 0, comm: swapper Tainted: G W 2.6.32-07387-gf3cae36 #5
Call Trace:
<IRQ> [<ffffffff81096457>] __report_bad_irq+0x3d/0x8c
[<ffffffff810965be>] note_interrupt+0x118/0x17e
[<ffffffff81096cc1>] handle_fasteoi_irq+0x9c/0xc1
[<ffffffff8100c4a2>] handle_irq+0x24/0x2e
[<ffffffff8145db0c>] do_IRQ+0x5c/0xc3
[<ffffffff81458d93>] ret_from_intr+0x0/0x16
<EOI> [<ffffffff812af4ea>] ? acpi_idle_enter_bm+0x256/0x28a
[<ffffffff812af4e3>] ? acpi_idle_enter_bm+0x24f/0x28a
[<ffffffff813911d4>] cpuidle_idle_call+0x9e/0xfa
[<ffffffff81008c89>] cpu_idle+0xb4/0xf6
[<ffffffff81452195>] start_secondary+0x201/0x242
handlers:
[<ffffffff8133663a>] (usb_hcd_irq+0x0/0xa7)
[<ffffffff81322933>] (ata_sff_interrupt+0x0/0x96)
Disabling IRQ #16
ata7.00: ATAPI: HP DVD Writer 400, KH27, max UDMA/33
ata7.00: configured for UDMA/33
scsi 6:0:0:0: CD-ROM HP DVD Writer 400c KH27 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 6:0:0:0: Attached scsi CD-ROM sr0
sr 6:0:0:0: Attached scsi generic sg6 type 5
[drm] nouveau 0000:02:00.0: No ctxprog for NV50
[drm] nouveau 0000:02:00.0: Allocating FIFO number 1
[drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 1
[drm] nouveau 0000:02:00.0: Detected a DAC output
[drm] nouveau 0000:02:00.0: Detected a TMDS output
[drm] nouveau 0000:02:00.0: Detected a DAC output
[drm] nouveau 0000:02:00.0: Detected a TMDS output
[drm] nouveau 0000:02:00.0: DCB encoder 1 unknown
[drm] nouveau 0000:02:00.0: Detected a DVI-I connector
[drm] nouveau 0000:02:00.0: Detected a DVI-I connector
[drm] nouveau 0000:02:00.0: allocated 1680x1050 fb: 0x40210000, bo ffff88032ca98400
fb0: nouveaufb frame buffer device
registered panic notifier
[drm] Initialized nouveau 0.0.15 20090420 for 0000:02:00.0 on minor 0
dracut: Autoassembling MD Raid
md: md0 stopped.
md: bind<sdb1>
md: bind<sda1>
md: raid1 personality registered for level 1
md0: Warning: Device sda1 is misaligned
md0: Warning: Device sdb1 is misaligned
raid1: raid set md0 active with 2 out of 2 mirrors
md0: detected capacity change from 0 to 209649664
dracut: mdadm: /dev/md0 has been started with 2 drives.
md0: unknown partition table
md: md1 stopped.
md: bind<sdb2>
md: bind<sdc1>
md: bind<sdd1>
md: bind<sdf1>
md: bind<sde1>
md: bind<sda2>
async_tx: api initialized (async)
xor: automatically using best checksumming function: generic_sse
generic_sse: 9196.000 MB/sec
xor: using function: generic_sse (9196.000 MB/sec)
raid6: int64x1 2371 MB/s
raid6: int64x2 2429 MB/s
raid6: int64x4 2042 MB/s
raid6: int64x8 1566 MB/s
raid6: sse2x1 5929 MB/s
raid6: sse2x2 6949 MB/s
raid6: sse2x4 8000 MB/s
raid6: using algorithm sse2x4 (8000 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
raid5: device sda2 operational as raid disk 0
raid5: device sde1 operational as raid disk 5
raid5: device sdf1 operational as raid disk 4
raid5: device sdd1 operational as raid disk 3
raid5: device sdc1 operational as raid disk 2
raid5: device sdb2 operational as raid disk 1
raid5: allocated 6386kB for md1
0: w=1 pa=0 pr=6 m=2 a=2 r=6 op1=0 op2=0
5: w=2 pa=0 pr=6 m=2 a=2 r=6 op1=0 op2=0
4: w=3 pa=0 pr=6 m=2 a=2 r=6 op1=0 op2=0
3: w=4 pa=0 pr=6 m=2 a=2 r=6 op1=0 op2=0
2: w=5 pa=0 pr=6 m=2 a=2 r=6 op1=0 op2=0
1: w=6 pa=0 pr=6 m=2 a=2 r=6 op1=0 op2=0
raid5: raid level 6 set md1 active with 6 out of 6 devices, algorithm 2
RAID5 conf printout:
--- rd:6 wd:6
disk 0, o:1, dev:sda2
disk 1, o:1, dev:sdb2
disk 2, o:1, dev:sdc1
disk 3, o:1, dev:sdd1
disk 4, o:1, dev:sdf1
disk 5, o:1, dev:sde1
md1: Warning: Device sda2 is misaligned
md1: Warning: Device sde1 is misaligned
md1: Warning: Device sdf1 is misaligned
md1: Warning: Device sdd1 is misaligned
md1: Warning: Device sdc1 is misaligned
md1: Warning: Device sdb2 is misaligned
md1: detected capacity change from 0 to 3999969837056
dracut: mdadm: /dev/md1 has been started with 6 drives.
md1: unknown partition table
dracut: Scanning devices md1 for LVM volume groups
dracut: Reading all physical volumes. This may take a while...
dracut: Found volume group "vg_00" using metadata type lvm2
device-mapper: table: 253:0: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=524288196608
device-mapper: table: 253:0: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=524288196608
device-mapper: table: 253:1: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=542139154432
device-mapper: table: 253:1: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=542139154432
device-mapper: table: 253:2: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=646996754432
device-mapper: table: 253:2: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=646996754432
device-mapper: table: 253:3: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=655385362432
device-mapper: table: 253:3: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=655385362432
device-mapper: table: 253:4: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=672162578432
device-mapper: table: 253:4: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=672162578432
device-mapper: table: 253:5: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=680551186432
device-mapper: table: 253:5: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=680551186432
device-mapper: table: 253:6: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=732996763648
device-mapper: table: 253:6: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=732996763648
device-mapper: table: 253:7: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=749773979648
device-mapper: table: 253:7: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=749773979648
device-mapper: table: 253:8: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=1306274234368
device-mapper: table: 253:8: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=1306274234368
device-mapper: table: 253:9: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=196608
device-mapper: table: 253:9: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=196608
device-mapper: table: 253:10: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=1861063213056
device-mapper: table: 253:10: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=1861063213056
device-mapper: table: 253:11: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=1995280941056
device-mapper: table: 253:11: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=1995280941056
device-mapper: table: 253:12: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=2251301257216
device-mapper: table: 253:12: target device md1 is misaligned: physical_block_size=512, logical_block_size=512, alignment_offset=0, start=2251301257216
dracut: 13 logical volume(s) in volume group "vg_00" now active
dracut: Autoassembling MD Raid
EXT4-fs (dm-3): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/mapper/vg_00-LogVol02_root
dracut: Loading SELinux policy
type=1404 audit(1260813101.014:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 8192 avtab hash slots, 131435 rules.
SELinux: 8192 avtab hash slots, 131435 rules.
SELinux: 8 users, 12 roles, 2787 types, 129 bools, 1 sens, 1024 cats
SELinux: 74 classes, 131435 rules
SELinux: Permission module_request in class system not defined in policy.
SELinux: Class tun_socket not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-3, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1260813101.237:3): policy loaded auid=4294967295 ses=4294967295
dracut: Switching root
[drm] DAC-7: set mode 1680x1050 25
[drm] nouveau 0000:02:00.0: GPU lockup - switching to software fbcon
Console: switching to colour frame buffer device 210x65
[drm] nouveau 0000:02:00.0: 0x0FA9: parsing clock script 0
udev: starting version 147
ACPI: WMI: Mapper loaded
sky2 driver version 1.26
sky2 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
sky2 0000:06:00.0: setting latency timer to 64
sky2 0000:06:00.0: Yukon-2 EC Ultra chip revision 3
alloc irq_desc for 58 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
sky2 0000:06:00.0: irq 58 for MSI/MSI-X
sky2 eth0: addr 00:26:18:00:1c:3b
sky2 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
sky2 0000:04:00.0: setting latency timer to 64
sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3
alloc irq_desc for 59 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
sky2 0000:04:00.0: irq 59 for MSI/MSI-X
sky2 eth1: addr 00:26:18:00:1c:3a
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
iTCO_vendor_support: vendor-support=0
input: PC Speaker as /devices/platform/pcspkr/input/input3
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
firewire_ohci 0000:08:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Linux video capture interface: v2.00
gspca: main v2.8.0 registered
gspca: probing 0733:0430
firewire_ohci: Added fw-ohci device 0000:08:02.0, OHCI version 1.10
gspca: /dev/video0 created
usbcore: registered new interface driver spca505
spca505: registered
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
alloc irq_desc for 60 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
HDA Intel 0000:00:1b.0: irq 60 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
ENS1371 0000:08:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
firewire_core: created device fw0: GUID 001e8c0001e5e584, S400
hda_codec: AD1989B: BIOS auto-probing.
ALSA sound/pci/hda/hda_codec.c:4282: autoconfig: line_outs=4 (0x12/0x16/0x24/0x25/0x0)
ALSA sound/pci/hda/hda_codec.c:4286: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:4290: hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:4291: mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:4294: dig-out=0x1b/0x1d
ALSA sound/pci/hda/hda_codec.c:4302: inputs: mic=0x17, fmic=0x14, line=0x15, fline=0x0, cd=0x18, aux=0x0
gameport: ES137x is pci0000:08:01.0/gameport0, io 0x200, speed 663kHz
name_count maxed, losing inode data: dev=00:06, inode=12108
name_count maxed, losing inode data: dev=00:06, inode=12108
name_count maxed, losing inode data: dev=00:06, inode=12108
name_count maxed, losing inode data: dev=00:06, inode=12100
name_count maxed, losing inode data: dev=00:06, inode=12113
name_count maxed, losing inode data: dev=00:06, inode=12113
name_count maxed, losing inode data: dev=00:06, inode=12113
name_count maxed, losing inode data: dev=00:06, inode=12113
name_count maxed, losing inode data: dev=00:06, inode=12100
name_count maxed, losing inode data: dev=00:06, inode=12118
name_count maxed, losing inode data: dev=00:06, inode=12118
name_count maxed, losing inode data: dev=00:06, inode=12118
name_count maxed, losing inode data: dev=00:06, inode=12118
name_count maxed, losing inode data: dev=00:06, inode=12100
name_count maxed, losing inode data: dev=00:06, inode=12123
name_count maxed, losing inode data: dev=00:06, inode=12123
name_count maxed, losing inode data: dev=00:06, inode=12123
name_count maxed, losing inode data: dev=00:06, inode=12123
name_count maxed, losing inode data: dev=00:06, inode=12100
name_count maxed, losing inode data: dev=00:06, inode=12128
name_count maxed, losing inode data: dev=00:06, inode=12128
name_count maxed, losing inode data: dev=00:06, inode=12128
name_count maxed, losing inode data: dev=00:06, inode=12128
name_count maxed, losing inode data: dev=00:06, inode=12100
name_count maxed, losing inode data: dev=00:06, inode=12133
name_count maxed, losing inode data: dev=00:06, inode=12133
name_count maxed, losing inode data: dev=00:06, inode=12133
name_count maxed, losing inode data: dev=00:06, inode=12133
name_count maxed, losing inode data: dev=00:06, inode=12100
name_count maxed, losing inode data: dev=00:06, inode=12138
name_count maxed, losing inode data: dev=00:06, inode=12138
name_count maxed, losing inode data: dev=00:06, inode=12138
name_count maxed, losing inode data: dev=00:06, inode=12138
name_count maxed, losing inode data: dev=00:06, inode=12100
name_count maxed, losing inode data: dev=00:06, inode=12144
name_count maxed, losing inode data: dev=00:06, inode=12144
name_count maxed, losing inode data: dev=00:06, inode=12144
name_count maxed, losing inode data: dev=00:06, inode=12144
name_count maxed, losing inode data: dev=00:06, inode=12100
name_count maxed, losing inode data: dev=00:06, inode=12149
name_count maxed, losing inode data: dev=00:06, inode=12149
name_count maxed, losing inode data: dev=00:06, inode=12149
name_count maxed, losing inode data: dev=00:06, inode=12149
name_count maxed, losing inode data: dev=00:06, inode=12100
name_count maxed, losing inode data: dev=00:06, inode=12154
name_count maxed, losing inode data: dev=00:06, inode=12154
name_count maxed, losing inode data: dev=00:06, inode=12154
name_count maxed, losing inode data: dev=00:06, inode=12154
name_count maxed, losing inode data: dev=00:06, inode=12100
name_count maxed, losing inode data: dev=00:06, inode=12159
name_count maxed, losing inode data: dev=00:06, inode=12159
name_count maxed, losing inode data: dev=00:06, inode=12159
name_count maxed, losing inode data: dev=00:06, inode=12159
name_count maxed, losing inode data: dev=00:06, inode=12100
name_count maxed, losing inode data: dev=00:06, inode=12164
name_count maxed, losing inode data: dev=00:06, inode=12164
name_count maxed, losing inode data: dev=00:06, inode=12164
name_count maxed, losing inode data: dev=00:06, inode=12164
name_count maxed, losing inode data: dev=00:06, inode=12100
name_count maxed, losing inode data: dev=00:06, inode=12169
name_count maxed, losing inode data: dev=00:06, inode=12169
name_count maxed, losing inode data: dev=00:06, inode=12169
name_count maxed, losing inode data: dev=00:06, inode=12169
name_count maxed, losing inode data: dev=00:06, inode=12100
name_count maxed, losing inode data: dev=00:06, inode=12174
name_count maxed, losing inode data: dev=00:06, inode=12174
name_count maxed, losing inode data: dev=00:06, inode=12174
name_count maxed, losing inode data: dev=00:06, inode=12174
name_count maxed, losing inode data: dev=00:06, inode=12100
name_count maxed, losing inode data: dev=00:06, inode=12179
name_count maxed, losing inode data: dev=00:06, inode=12179
name_count maxed, losing inode data: dev=00:06, inode=12179
name_count maxed, losing inode data: dev=00:06, inode=12179
name_count maxed, losing inode data: dev=00:06, inode=12100
name_count maxed, losing inode data: dev=00:06, inode=12184
name_count maxed, losing inode data: dev=00:06, inode=12184
name_count maxed, losing inode data: dev=00:06, inode=12184
name_count maxed, losing inode data: dev=00:06, inode=12184
name_count maxed, losing inode data: dev=00:06, inode=12100
name_count maxed, losing inode data: dev=00:06, inode=12189
name_count maxed, losing inode data: dev=00:06, inode=12189
name_count maxed, losing inode data: dev=00:06, inode=12189
name_count maxed, losing inode data: dev=00:06, inode=12189
name_count maxed, losing inode data: dev=00:06, inode=12100
name_count maxed, losing inode data: dev=00:06, inode=12194
name_count maxed, losing inode data: dev=00:06, inode=12194
name_count maxed, losing inode data: dev=00:06, inode=12194
name_count maxed, losing inode data: dev=00:06, inode=12194
name_count maxed, losing inode data: dev=00:06, inode=12100
name_count maxed, losing inode data: dev=00:06, inode=12199
name_count maxed, losing inode data: dev=00:06, inode=12199
name_count maxed, losing inode data: dev=00:06, inode=12199
name_count maxed, losing inode data: dev=00:06, inode=12199
name_count maxed, losing inode data: dev=00:06, inode=12100
name_count maxed, losing inode data: dev=00:06, inode=12204
name_count maxed, losing inode data: dev=00:06, inode=12204
name_count maxed, losing inode data: dev=00:06, inode=12204
name_count maxed, losing inode data: dev=00:06, inode=12204
name_count maxed, losing inode data: dev=00:06, inode=12100
name_count maxed, losing inode data: dev=00:06, inode=12209
name_count maxed, losing inode data: dev=00:06, inode=12209
name_count maxed, losing inode data: dev=00:06, inode=12209
name_count maxed, losing inode data: dev=00:06, inode=12209
name_count maxed, losing inode data: dev=00:06, inode=12100
name_count maxed, losing inode data: dev=00:06, inode=12214
name_count maxed, losing inode data: dev=00:06, inode=12214
name_count maxed, losing inode data: dev=00:06, inode=12214
name_count maxed, losing inode data: dev=00:06, inode=12214
name_count maxed, losing inode data: dev=00:06, inode=12100
name_count maxed, losing inode data: dev=00:06, inode=12219
name_count maxed, losing inode data: dev=00:06, inode=12219
name_count maxed, losing inode data: dev=00:06, inode=12219
name_count maxed, losing inode data: dev=00:06, inode=12219
name_count maxed, losing inode data: dev=00:06, inode=201
name_count maxed, losing inode data: dev=00:06, inode=12224
name_count maxed, losing inode data: dev=00:06, inode=12224
name_count maxed, losing inode data: dev=00:06, inode=12224
name_count maxed, losing inode data: dev=00:06, inode=12227
name_count maxed, losing inode data: dev=00:06, inode=12227
name_count maxed, losing inode data: dev=00:06, inode=12227
name_count maxed, losing inode data: dev=00:06, inode=12227
name_count maxed, losing inode data: dev=00:06, inode=12224
name_count maxed, losing inode data: dev=00:06, inode=12232
name_count maxed, losing inode data: dev=00:06, inode=12232
name_count maxed, losing inode data: dev=00:06, inode=12232
name_count maxed, losing inode data: dev=00:06, inode=12232
name_count maxed, losing inode data: dev=00:06, inode=12224
name_count maxed, losing inode data: dev=00:06, inode=12237
name_count maxed, losing inode data: dev=00:06, inode=12237
name_count maxed, losing inode data: dev=00:06, inode=12237
name_count maxed, losing inode data: dev=00:06, inode=12237
name_count maxed, losing inode data: dev=00:06, inode=12224
name_count maxed, losing inode data: dev=00:06, inode=12242
name_count maxed, losing inode data: dev=00:06, inode=12242
name_count maxed, losing inode data: dev=00:06, inode=12242
name_count maxed, losing inode data: dev=00:06, inode=12242
name_count maxed, losing inode data: dev=00:06, inode=12224
name_count maxed, losing inode data: dev=00:06, inode=12247
name_count maxed, losing inode data: dev=00:06, inode=12247
name_count maxed, losing inode data: dev=00:06, inode=12247
name_count maxed, losing inode data: dev=00:06, inode=12247
name_count maxed, losing inode data: dev=00:06, inode=12224
name_count maxed, losing inode data: dev=00:06, inode=12252
name_count maxed, losing inode data: dev=00:06, inode=12252
name_count maxed, losing inode data: dev=00:06, inode=12252
name_count maxed, losing inode data: dev=00:06, inode=12252
name_count maxed, losing inode data: dev=00:06, inode=12224
name_count maxed, losing inode data: dev=00:06, inode=12257
name_count maxed, losing inode data: dev=00:06, inode=12257
name_count maxed, losing inode data: dev=00:06, inode=12257
name_count maxed, losing inode data: dev=00:06, inode=12257
name_count maxed, losing inode data: dev=00:06, inode=12224
name_count maxed, losing inode data: dev=00:06, inode=12262
name_count maxed, losing inode data: dev=00:06, inode=12262
name_count maxed, losing inode data: dev=00:06, inode=12262
name_count maxed, losing inode data: dev=00:06, inode=12262
name_count maxed, losing inode data: dev=00:06, inode=12224
name_count maxed, losing inode data: dev=00:06, inode=12267
name_count maxed, losing inode data: dev=00:06, inode=12267
name_count maxed, losing inode data: dev=00:06, inode=12267
name_count maxed, losing inode data: dev=00:06, inode=12267
name_count maxed, losing inode data: dev=00:06, inode=12273
name_count maxed, losing inode data: dev=00:06, inode=12273
name_count maxed, losing inode data: dev=00:06, inode=12273
name_count maxed, losing inode data: dev=00:06, inode=12273
name_count maxed, losing inode data: dev=00:06, inode=12273
name_count maxed, losing inode data: dev=00:06, inode=12273
name_count maxed, losing inode data: dev=00:06, inode=12273
name_count maxed, losing inode data: dev=00:06, inode=12273
name_count maxed, losing inode data: dev=00:06, inode=12273
name_count maxed, losing inode data: dev=00:06, inode=12273
name_count maxed, losing inode data: dev=00:06, inode=12273
name_count maxed, losing inode data: dev=00:06, inode=12273
name_count maxed, losing inode data: dev=00:06, inode=12273
name_count maxed, losing inode data: dev=00:06, inode=12273
name_count maxed, losing inode data: dev=00:06, inode=12273
name_count maxed, losing inode data: dev=00:06, inode=12273
name_count maxed, losing inode data: dev=00:06, inode=12273
name_count maxed, losing inode data: dev=00:06, inode=12273
name_count maxed, losing inode data: dev=00:06, inode=12273
name_count maxed, losing inode data: dev=00:06, inode=12273
name_count maxed, losing inode data: dev=00:06, inode=12273
name_count maxed, losing inode data: dev=00:06, inode=12273
name_count maxed, losing inode data: dev=00:06, inode=12273
device-mapper: multipath: version 1.1.0 loaded
EXT4-fs (dm-6): mounted filesystem with ordered data mode
SELinux: initialized (dev dm-6, type ext4), uses xattr
EXT4-fs (dm-1): mounted filesystem with ordered data mode
SELinux: initialized (dev dm-1, type ext4), uses xattr
EXT4-fs (dm-5): mounted filesystem with ordered data mode
SELinux: initialized (dev dm-5, type ext4), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3-fs (md0): using internal journal
EXT3-fs (md0): mounted filesystem with ordered data mode
SELinux: initialized (dev md0, type ext3), uses xattr
EXT4-fs (dm-7): mounted filesystem with ordered data mode
SELinux: initialized (dev dm-7, type ext4), uses xattr
EXT4-fs (dm-8): mounted filesystem with ordered data mode
SELinux: initialized (dev dm-8, type ext4), uses xattr
EXT4-fs (dm-4): mounted filesystem with ordered data mode
SELinux: initialized (dev dm-4, type ext4), uses xattr
EXT4-fs (dm-2): mounted filesystem with ordered data mode
SELinux: initialized (dev dm-2, type ext4), uses xattr
device fsid 834fc529ea4ea2c5-f9308b94bfd9cac devid 1 transid 23177 /dev/mapper/vg_00-kvm_guest_btrfs_test
SELinux: initialized (dev dm-9, type btrfs), uses xattr
EXT4-fs (dm-10): mounted filesystem with ordered data mode
SELinux: initialized (dev dm-10, type ext4), uses xattr
Adding 17432568k swap on /dev/mapper/vg_00-LogVol00_swap. Priority:-1 extents:1 across:17432568k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
--
fedora-test-list mailing list
fedora-test-list@xxxxxxxxxx
To unsubscribe:
https://www.redhat.com/mailman/listinfo/fedora-test-list
