Dear fellow testers,
After applying the updates(wonder which ones and from which day 20090925->20090928)?, I can no longer connect to the internet with wireless connection on my Acer Aspire 1 netbook. In dmesg, at the very end it mentions something with ipv6, I am attching part of dmesg to see if it can help me here, I am sending this with the same netbook but with wired connection.
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (dm-0): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/mapper/vg_aceraspire1-lv_root
dracut: Loading SELinux policy
type=1404 audit(1254262710.493:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 8192 avtab hash slots, 138018 rules.
SELinux: 8192 avtab hash slots, 138018 rules.
SELinux: 8 users, 12 roles, 2864 types, 129 bools, 1 sens, 1024 cats
SELinux: 75 classes, 138018 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1254262712.005:3): policy loaded auid=4294967295 ses=4294967295
dracut: Switching root
type=1305 audit(1254262713.812:6): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 subj=system_u:system_r:readahead_t:s0 res=1
udev: starting version 145
ACPI: WMI: Mapper loaded
ATL1E 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ATL1E 0000:03:00.0: setting latency timer to 64
cfg80211: Calling CRDA to update world regulatory domain
intel_rng: FWH not detected
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Linux video capture interface: v2.00
cfg80211: World regulatory domain updated:
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
acer-wmi: Acer Laptop ACPI-WMI Extras
acer-wmi: Unable to detect available WMID devices
uvcvideo: Found UVC 1.00 device Webcam (04f2:b084)
input: Webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/input/input8
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
ath5k 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ath5k 0000:01:00.0: setting latency timer to 64
ath5k 0000:01:00.0: registered as 'phy0'
ath: EEPROM regdomain: 0x65
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x65
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:1b.0: setting latency timer to 64
phy0: Selected rate control algorithm 'minstrel'
Registered led device: ath5k-phy0::rx
Registered led device: ath5k-phy0::tx
ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
hda_codec: Unknown model for ALC272, trying auto-probe from BIOS...
ALSA sound/pci/hda/hda_codec.c:3862: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3866: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3870: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3871: mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:3882: inputs: mic=0x12, fmic=0x18, line=0x0, fline=0x0, cd=0x0, aux=0x0
ALSA sound/pci/hda/patch_realtek.c:1181: realtek: No valid SSID, checking pincfg 0x4016892d for NID 0x1d
ALSA sound/pci/hda/patch_realtek.c:1197: realtek: Enabling init ASM_ID=0x892d CODEC_ID=10ec0272
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
(5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
device-mapper: multipath: version 1.1.0 loaded
EXT4-fs (dm-0): internal journal on dm-0:8
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda3, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 2031608k swap on /dev/mapper/vg_aceraspire1-lv_swap. Priority:-1 extents:1 across:2031608k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
microcode: CPU0 sig=0x106c2, pf=0x4, revision=0x212
platform microcode: firmware: requesting intel-ucode/06-1c-02
microcode: CPU1 sig=0x106c2, pf=0x4, revision=0x212
platform microcode: firmware: requesting intel-ucode/06-1c-02
Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
Microcode Update Driver: v2.00 removed.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
ADDRCONF(NETDEV_UP): wlan0: link is not ready
ATL1E 0000:03:00.0: irq 28 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
SELinux: initialized (dev nfsd, type nfsd), uses genfs_contexts
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0-1 level SIBLING
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level SIBLING
groups: 1 0
type=1400 audit(1254262761.504:7): avc: denied { search } for pid=1487 comm="polkitd" name="root" dev=dm-0 ino=277 scontext=system_u:system_r:policykit_t:s0-s0:c0.c1023 tcontext=unconfined_u:object_r:user_home_dir_t:s0 tclass=dir
fuse init (API version 7.12)
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
wlan0: authenticate with AP 00:1c:58:05:e7:a0
wlan0: authenticated
wlan0: associate with AP 00:1c:58:05:e7:a0
wlan0: RX AssocResp from 00:1c:58:05:e7:a0 (capab=0x431 status=0 aid=54)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[olivares@acer-aspire-1 ~]$ dmesg
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.31.1-48.fc12.i686 (mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.4.1 20090923 (Red Hat 4.4.1-16) (GCC) ) #1 SMP Fri Sep 25 17:13:30 EDT 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f576000 (usable)
BIOS-e820: 000000003f576000 - 000000003f5bf000 (reserved)
BIOS-e820: 000000003f5bf000 - 000000003f66e000 (usable)
BIOS-e820: 000000003f66e000 - 000000003f6bf000 (ACPI NVS)
BIOS-e820: 000000003f6bf000 - 000000003f6ef000 (usable)
BIOS-e820: 000000003f6ef000 - 000000003f6ff000 (ACPI data)
BIOS-e820: 000000003f6ff000 - 000000003f700000 (usable)
BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
DMI 2.4 present.
last_pfn = 0x3f700 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FFF00000 mask 0FFF00000 write-protect
1 base 0FFFC0000 mask 0FFFE0000 uncachable
2 base 000000000 mask 0E0000000 write-back
3 base 020000000 mask 0E0000000 write-back
4 base 03F800000 mask 0FF800000 uncachable
5 base 03F700000 mask 0FFF00000 uncachable
6 disabled
7 base 000000000 mask 0FFFE0000 uncachable
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 4095MB, range: 1MB, type WP
reg 1, base: 4194048KB, range: 128KB, type UC
reg 2, base: 0GB, range: 512MB, type WB
reg 3, base: 512MB, range: 512MB, type WB
reg 4, base: 1016MB, range: 8MB, type UC
reg 5, base: 1015MB, range: 1MB, type UC
reg 7, base: 0GB, range: 128KB, type UC
WARNING: BIOS bug: VAR MTRR 7 contains strange UC entry under 1M, check with your system vendor!
total RAM coverred: 1015M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 1GB, type WB
reg 1, base: 1015MB, range: 1MB, type UC
reg 2, base: 1016MB, range: 8MB, type UC
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 01800000
init_memory_mapping: 0000000000000000-00000000373fe000
Using x86 segment limits to approximate NX protection
0000000000 - 0000400000 page 4k
0000400000 - 0037000000 page 2M
0037000000 - 00373fe000 page 4k
kernel direct mapping tables up to 373fe000 @ 7000-d000
RAMDISK: 3753b000 - 37fef0d5
Allocated new RAMDISK: 012bd000 - 01d710d5
Move RAMDISK from 000000003753b000 - 0000000037fef0d4 to 012bd000 - 01d710d4
ACPI: RSDP 000fe020 00024 (v02 ACRSYS)
ACPI: XSDT 3f6fe120 00064 (v01 ACRSYS ACRPRDCT 00000001 01000013)
ACPI: FACP 3f6fc000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: DSDT 3f6f1000 06E2E (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: FACS 3f688000 00040
ACPI: SSDT 3f6fd000 004C4 (v02 PmRef CpuPm 00003000 INTL 20051117)
ACPI: HPET 3f6fb000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: APIC 3f6fa000 00068 (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: MCFG 3f6f9000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: ASF! 3f6f8000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: SLIC 3f6f0000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: BOOT 3f6ef000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: Local APIC address 0xfee00000
131MB HIGHMEM available.
883MB LOWMEM available.
mapped low ram: 0 - 373fe000
low ram: 0 - 373fe000
node 0 low ram: 00000000 - 373fe000
node 0 bootmap 0000a000 - 00010e80
(9 early reservations) ==> bootmem [0000000000 - 00373fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000400000 - 00012b55cc] TEXT DATA BSS ==> [0000400000 - 00012b55cc]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [00012b6000 - 00012bc148] BRK ==> [00012b6000 - 00012bc148]
#6 [0000007000 - 000000a000] PGTABLE ==> [0000007000 - 000000a000]
#7 [00012bd000 - 0001d710d5] NEW RAMDISK ==> [00012bd000 - 0001d710d5]
#8 [000000a000 - 0000011000] BOOTMAP ==> [000000a000 - 0000011000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x000373fe
HighMem 0x000373fe -> 0x0003f700
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x0003f576
0: 0x0003f5bf -> 0x0003f66e
0: 0x0003f6bf -> 0x0003f6ef
0: 0x0003f6ff -> 0x0003f700
On node 0 totalpages: 259573
free_area_init_node: node 0, pgdat c0a6a6a0, node_mem_map c1d72000
DMA zone: 60 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3939 pages, LIFO batch:0
Normal zone: 3255 pages used for memmap
Normal zone: 218951 pages, LIFO batch:31
HighMem zone: 492 pages used for memmap
HighMem zone: 32876 pages, LIFO batch:7
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 334 pages at c2c63000, static data 1345756 bytes
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 255766
Kernel command line: ro root=/dev/mapper/vg_aceraspire1-lv_root SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us rd_plytheme=charge
PID hash table entries: 4096 (order: 12, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
allocated 5196800 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (000373fe:0003f700)
Memory: 988044k/1039360k available (4272k kernel code, 49932k reserved, 2364k data, 1768k init, 133472k highmem)
virtual kernel memory layout:
fixmap : 0xffad5000 - 0xfffff000 (5288 kB)
pkmap : 0xff400000 - 0xff800000 (4096 kB)
vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
.init : 0xc0a7b000 - 0xc0c35000 (1768 kB)
.data : 0xc082c000 - 0xc0a7b000 (2364 kB)
.text : 0xc0400000 - 0xc082c000 (4272 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:1280
Fast TSC calibration using PIT
Detected 1662.304 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8
... MAX_LOCK_DEPTH: 48
... MAX_LOCKDEP_KEYS: 8191
... CLASSHASH_SIZE: 4096
... MAX_LOCKDEP_ENTRIES: 16384
... MAX_LOCKDEP_CHAINS: 32768
... CHAINHASH_SIZE: 16384
memory used by lock dependency info: 3743 kB
per task-struct memory footprint: 1920 bytes
ODEBUG: 10 of 10 active objects replaced
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 3324.60 BogoMIPS (lpj=1662304)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Counters: Atom events, Intel PMU driver.
... version: 3
... bit width: 40
... generic counters: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose counters: 3
... counter mask: 0000000700000003
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090521
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 20387 entries in 40 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Atom(TM) CPU N280 @ 1.66GHz stepping 02
lockdep: fixing up alternatives.
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3324.82 BogoMIPS (lpj=1662414)
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
CPU1: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Atom(TM) CPU N280 @ 1.66GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (6649.43 BogoMIPS).
sizeof(vma)=84 bytes
sizeof(page)=60 bytes
sizeof(inode)=652 bytes
sizeof(dentry)=164 bytes
sizeof(ext3inode)=912 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=192 bytes
sizeof(task_struct)=5512 bytes
CPU0 attaching sched-domain:
domain 0: span 0-1 level SIBLING
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level SIBLING
groups: 1 0
Booting paravirtualized kernel on bare hardware
regulator: core version 0.5
Time: 22:18:20 Date: 09/29/09
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: Power Resource [FN00] (on)
ACPI: No dock devices found.
ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f6c44080), AE_ALREADY_EXISTS
ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 32bit mmio: [0x56280000-0x562fffff]
pci 0000:00:02.0: reg 14 io port: [0x50f0-0x50f7]
pci 0000:00:02.0: reg 18 32bit mmio: [0x40000000-0x4fffffff]
pci 0000:00:02.0: reg 1c 32bit mmio: [0x56300000-0x5633ffff]
pci 0000:00:02.1: reg 10 32bit mmio: [0x56200000-0x5627ffff]
pci 0000:00:1b.0: reg 10 64bit mmio: [0x56340000-0x56343fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x50a0-0x50bf]
pci 0000:00:1d.1: reg 20 io port: [0x5080-0x509f]
pci 0000:00:1d.2: reg 20 io port: [0x5060-0x507f]
pci 0000:00:1d.3: reg 20 io port: [0x5040-0x505f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0x56344400-0x563447ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff2c (mask 0003)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007)
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.1: reg 20 io port: [0x50c0-0x50cf]
pci 0000:00:1f.2: reg 10 io port: [0x50d8-0x50df]
pci 0000:00:1f.2: reg 14 io port: [0x50fc-0x50ff]
pci 0000:00:1f.2: reg 18 io port: [0x50d0-0x50d7]
pci 0000:00:1f.2: reg 1c io port: [0x50f8-0x50fb]
pci 0000:00:1f.2: reg 20 io port: [0x5020-0x502f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0x56344000-0x563443ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 20 io port: [0x5000-0x501f]
pci 0000:01:00.0: reg 10 64bit mmio: [0x55100000-0x5510ffff]
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.0: bridge io port: [0x4000-0x4fff]
pci 0000:00:1c.0: bridge 32bit mmio: [0x55100000-0x561fffff]
pci 0000:00:1c.0: bridge 64bit mmio pref: [0x50000000-0x50ffffff]
pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff]
pci 0000:00:1c.1: bridge 32bit mmio: [0x54100000-0x550fffff]
pci 0000:00:1c.1: bridge 64bit mmio pref: [0x51000000-0x51ffffff]
pci 0000:03:00.0: reg 10 64bit mmio: [0x53000000-0x5303ffff]
pci 0000:03:00.0: reg 18 io port: [0x1000-0x107f]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.2: bridge io port: [0x1000-0x2fff]
pci 0000:00:1c.2: bridge 32bit mmio: [0x53000000-0x540fffff]
pci 0000:00:1c.2: bridge 64bit mmio pref: [0x52000000-0x52ffffff]
pci 0000:00:1e.0: transparent bridge
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f6c44080), AE_ALREADY_EXISTS
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
DMA-API: preallocated 32768 debug entries
DMA-API: debugging enabled by kernel config
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:01: io resource (0x164e-0x164f) overlaps 0000:00:1c.2 BAR 13 (0x1000-0x2fff), disabling
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: ioport range 0x200-0x20f has been reserved
system 00:01: ioport range 0x600-0x60f has been reserved
system 00:01: ioport range 0x610-0x610 has been reserved
system 00:01: ioport range 0x800-0x80f has been reserved
system 00:01: ioport range 0x400-0x47f has been reserved
system 00:01: ioport range 0x500-0x53f has been reserved
system 00:01: ioport range 0xff2c-0xff2f has been reserved
system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1c.0: IO window: 0x4000-0x4fff
pci 0000:00:1c.0: MEM window: 0x55100000-0x561fffff
pci 0000:00:1c.0: PREFETCH window: 0x00000050000000-0x00000050ffffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.1: IO window: 0x3000-0x3fff
pci 0000:00:1c.1: MEM window: 0x54100000-0x550fffff
pci 0000:00:1c.1: PREFETCH window: 0x00000051000000-0x00000051ffffff
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.2: IO window: 0x1000-0x2fff
pci 0000:00:1c.2: MEM window: 0x53000000-0x540fffff
pci 0000:00:1c.2: PREFETCH window: 0x00000052000000-0x00000052ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: disabled
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: enabling device (0000 -> 0003)
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io: [0x4000-0x4fff]
pci_bus 0000:01: resource 1 mem: [0x55100000-0x561fffff]
pci_bus 0000:01: resource 2 pref mem [0x50000000-0x50ffffff]
pci_bus 0000:02: resource 0 io: [0x3000-0x3fff]
pci_bus 0000:02: resource 1 mem: [0x54100000-0x550fffff]
pci_bus 0000:02: resource 2 pref mem [0x51000000-0x51ffffff]
pci_bus 0000:03: resource 0 io: [0x1000-0x2fff]
pci_bus 0000:03: resource 1 mem: [0x53000000-0x540fffff]
pci_bus 0000:03: resource 2 pref mem [0x52000000-0x52ffffff]
pci_bus 0000:04: resource 3 io: [0x00-0xffff]
pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 9, 2621440 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 10960k freed
Simple Boot Flag value 0x5 read from CMOS RAM was invalid
Simple Boot Flag at 0x44 set to 0x1
apm: BIOS not found.
audit: initializing netlink socket (disabled)
type=2000 audit(1254262702.075:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1691
SELinux: Registering netfilter hooks
cryptomgr_test used greatest stack depth: 6920 bytes left
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:1c.2: setting latency timer to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f6c44080), AE_ALREADY_EXISTS
ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f6c44080), AE_ALREADY_EXISTS
ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f6c44080), AE_ALREADY_EXISTS
ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f6c44080), AE_ALREADY_EXISTS
ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f6c44080), AE_ALREADY_EXISTS
ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f6c44080), AE_ALREADY_EXISTS
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
decode_hpp: Could not get hotplug parameters. Use defaults
acpiphp: Slot [1] registered
acpiphp_glue: sibling found, but _SUN doesn't match!
acpiphp_glue: sibling found, but _SUN doesn't match!
acpiphp_glue: sibling found, but _SUN doesn't match!
ACPI: AC Adapter [AC] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID0]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
ACPI: Sleep Button [SLPB]
fan PNP0C0B:00: registered as cooling_device0
ACPI: Fan [FAN] (on)
ACPI: SSDT 3f592c90 001F7 (v02 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 3f591e10 001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117)
Marking TSC unstable due to TSC halts in idle
ACPI: CPU0 (power states: C1[C1] C2[C2])
processor LNXCPU:00: registered as cooling_device1
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 3f592f10 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117)
ACPI: SSDT 3f590f10 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117)
ACPI: CPU1 (power states: C1[C1] C2[C2])
processor LNXCPU:01: registered as cooling_device2
ACPI: Processor [CPU1] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (27 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
ACPI: Battery Slot [BAT0] (battery present)
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 945GME Chipset
agpgart-intel 0000:00:00.0: detected 7932K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input4
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0x56344000 port 0x56344100 irq 27
ata2: DUMMY
ata3: SATA max UDMA/133 abar m1024@0x56344000 port 0x56344200 irq 27
ata4: DUMMY
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x50c0 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x50c8 irq 15
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ata6: port disabled. ignoring.
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 16, io mem 0x56344400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.31.1-48.fc12.i686 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x000050a0
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.31.1-48.fc12.i686 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 17, io base 0x00005080
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.31.1-48.fc12.i686 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005060
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.31.1-48.fc12.i686 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 19, io base 0x00005040
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.31.1-48.fc12.i686 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nf_conntrack version 0.5.0 (16240 buckets, 64960 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
No TPM chip found, activating TPM-bypass!
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
Magic number: 9:803:351
rtc_cmos 00:03: setting system clock to 2009-09-29 22:18:24 UTC (1254262704)
Initalizing network drop monitor service
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: ATA-8: Hitachi HTS543216L9SA00, FB2OC40C, max UDMA/133
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54321 FB2O PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-2: new high speed USB device using ehci_hcd and address 2
sda: sda1 sda2 sda3 sda4 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-2: New USB device found, idVendor=04f2, idProduct=b084
usb 1-2: New USB device strings: Mfr=3, Product=1, SerialNumber=0
usb 1-2: Product: Webcam
usb 1-2: Manufacturer: Chicony Electronics Co., Ltd.
usb 1-2: configuration #1 chosen from 1 choice
ata3: SATA link down (SStatus 0 SControl 300)
Freeing unused kernel memory: 1768k freed
NX-protecting the kernel data: c082c000, 2858 pages
Write protecting the kernel text: 4272k
Write protecting the kernel read-only data: 1776k
mknod used greatest stack depth: 6816 bytes left
mount used greatest stack depth: 6536 bytes left
mknod used greatest stack depth: 6504 bytes left
dracut: dracut-002-8.git845dd502.fc12
udev: starting version 145
Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04771/0xa40000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
udevadm used greatest stack depth: 6328 bytes left
async/0 used greatest stack depth: 5916 bytes left
acpi device:1a: registered as cooling_device3
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:16/input/input7
ACPI: Video Device [OVGA] (multi-head: yes rom: yes post: no)
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
fbcon: inteldrmfb (fb0) is primary device
[drm] LVDS-8: set mode 1024x600 e
Console: switching to colour frame buffer device 128x37
fb0: inteldrmfb frame buffer device
registered panic notifier
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
modprobe used greatest stack depth: 4848 bytes left
dracut: Starting plymouth daemon
dracut: Scanning devices sda5 for LVM volume groups
dracut: Reading all physical volumes. This may take a while...
dracut: Found volume group "vg_aceraspire1" using metadata type lvm2
dracut: 2 logical volume(s) in volume group "vg_aceraspire1" now active
EXT4-fs (dm-0): barriers enabled
kjournald2 starting: pid 250, dev dm-0:8, commit interval 5 seconds
EXT4-fs (dm-0): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (dm-0): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/mapper/vg_aceraspire1-lv_root
dracut: Loading SELinux policy
type=1404 audit(1254262710.493:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 8192 avtab hash slots, 138018 rules.
SELinux: 8192 avtab hash slots, 138018 rules.
SELinux: 8 users, 12 roles, 2864 types, 129 bools, 1 sens, 1024 cats
SELinux: 75 classes, 138018 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1254262712.005:3): policy loaded auid=4294967295 ses=4294967295
dracut: Switching root
type=1305 audit(1254262713.812:6): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 subj=system_u:system_r:readahead_t:s0 res=1
udev: starting version 145
ACPI: WMI: Mapper loaded
ATL1E 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ATL1E 0000:03:00.0: setting latency timer to 64
cfg80211: Calling CRDA to update world regulatory domain
intel_rng: FWH not detected
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Linux video capture interface: v2.00
cfg80211: World regulatory domain updated:
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
acer-wmi: Acer Laptop ACPI-WMI Extras
acer-wmi: Unable to detect available WMID devices
uvcvideo: Found UVC 1.00 device Webcam (04f2:b084)
input: Webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/input/input8
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
ath5k 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ath5k 0000:01:00.0: setting latency timer to 64
ath5k 0000:01:00.0: registered as 'phy0'
ath: EEPROM regdomain: 0x65
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x65
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:1b.0: setting latency timer to 64
phy0: Selected rate control algorithm 'minstrel'
Registered led device: ath5k-phy0::rx
Registered led device: ath5k-phy0::tx
ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
hda_codec: Unknown model for ALC272, trying auto-probe from BIOS...
ALSA sound/pci/hda/hda_codec.c:3862: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3866: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3870: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3871: mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:3882: inputs: mic=0x12, fmic=0x18, line=0x0, fline=0x0, cd=0x0, aux=0x0
ALSA sound/pci/hda/patch_realtek.c:1181: realtek: No valid SSID, checking pincfg 0x4016892d for NID 0x1d
ALSA sound/pci/hda/patch_realtek.c:1197: realtek: Enabling init ASM_ID=0x892d CODEC_ID=10ec0272
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
(5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
device-mapper: multipath: version 1.1.0 loaded
EXT4-fs (dm-0): internal journal on dm-0:8
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda3, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 2031608k swap on /dev/mapper/vg_aceraspire1-lv_swap. Priority:-1 extents:1 across:2031608k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
microcode: CPU0 sig=0x106c2, pf=0x4, revision=0x212
platform microcode: firmware: requesting intel-ucode/06-1c-02
microcode: CPU1 sig=0x106c2, pf=0x4, revision=0x212
platform microcode: firmware: requesting intel-ucode/06-1c-02
Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
Microcode Update Driver: v2.00 removed.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
ADDRCONF(NETDEV_UP): wlan0: link is not ready
ATL1E 0000:03:00.0: irq 28 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
SELinux: initialized (dev nfsd, type nfsd), uses genfs_contexts
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0-1 level SIBLING
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level SIBLING
groups: 1 0
type=1400 audit(1254262761.504:7): avc: denied { search } for pid=1487 comm="polkitd" name="root" dev=dm-0 ino=277 scontext=system_u:system_r:policykit_t:s0-s0:c0.c1023 tcontext=unconfined_u:object_r:user_home_dir_t:s0 tclass=dir
fuse init (API version 7.12)
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
wlan0: authenticate with AP 00:1c:58:05:e7:a0
wlan0: authenticated
wlan0: associate with AP 00:1c:58:05:e7:a0
wlan0: RX AssocResp from 00:1c:58:05:e7:a0 (capab=0x431 status=0 aid=54)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
wlan0: disassociating by local choice (reason=3)
wlan0: deauthenticated (Reason: 2)
wlan0: direct probe to AP 00:1c:58:05:e8:90 try 1
[olivares@acer-aspire-1 ~]$
Regards,
Antonio
--
fedora-test-list mailing list
fedora-test-list@xxxxxxxxxx
To unsubscribe:
https://www.redhat.com/mailman/listinfo/fedora-test-list
