Re: Dracut or Selinux problem with update to kernel-2.6.31-2.fc12.x86_64 ?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




--- On Mon, 9/14/09, martin tack <tack649@xxxxxxxxx> wrote:

> From: martin tack <tack649@xxxxxxxxx>
> Subject: Dracut or Selinux problem with update to kernel-2.6.31-2.fc12.x86_64 ?
> To: fedora-test-list@xxxxxxxxxx
> Date: Monday, September 14, 2009, 12:34 AM
> Reboot after update halts on gdm with black
> screen .
> 
> gdm is active but not visible ,because one hit of tab and
> enter reboots .
> 
> While this was the first kernel update with dracut
> initramfs on my system ,I suspect a rules conflict with
> selinux .
> 
> 
> See also the avc denials in dmesg ,
> 
> snip-xorg.0.log----------------------------------------------------------------------------------------------------------------------------
> (II) RADEON(0): Modeline "640x480"x60.0  
> 25.20  640 656 752 800  480 490 492 525 -hsync -vsync
> (31.5 kHz)
> 
> (II) RADEON(0): Modeline "640x400"x70.1  
> 25.17  640 656 752 800  400 412 414 449 +hsync -vsync
> (31.5 kHz)
> (II) RADEON(0): EDID for output DVI-0
> (II) RADEON(0): EDID for output S-video
> (II) AIGLX: Suspending AIGLX clients for VT switch
> 
> (II) Power Button: Close
> (II) UnloadModule: "evdev"
> (II) Power Button: Close
> (II) UnloadModule: "evdev"
> (II) Sleep Button: Close
> (II) UnloadModule: "evdev"
> (II) HID 046a:0021: Close
> 
> (II) UnloadModule: "evdev"
> (II) Logitech USB Receiver: Close
> (II) UnloadModule: "evdev"
> (II) Macintosh mouse button emulation: Close
> (II) UnloadModule: "evdev"
> (II) HID 046a:0021: Close
> 
> (II) UnloadModule: "evdev"
> (II) AT Translated Set 2 keyboard: Close
> (II) UnloadModule: "evdev"
> (II) PS/2 Logitech Mouse: Close
> (II) UnloadModule: "evdev"
> (WW) xf86CloseConsole: VT_WAITACTIVE failed: Interrupted
> system call
> 
> snip&end----------------------------------------------------------------------------------------------------------------------------
> 
> and in dmesg
> 
> snip-dmesg------------------------------------------------------------------------------
> 
> 
> SELinux: initialized (dev bdev, type bdev), uses
> genfs_contexts
> SELinux: initialized (dev rootfs, type rootfs), uses
> genfs_contexts
> SELinux: initialized (dev sysfs, type sysfs), uses
> genfs_contexts
> type=1403 audit(1252909022.438:3): policy loaded
> auid=4294967295 ses=4294967295
> 
> dracut: Switching root
> udev: starting version 145
> type=1400 audit(1252909025.411:7): avc:  denied  { read }
> for  pid=393 comm="modprobe"
> name="modprobe.d" dev=sda2 ino=58
> scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023
> tcontext=system_u:object_r:modules_conf_t:s0 tclass=dir
> 
> type=1400 audit(1252909025.411:8): avc:  denied  { open }
> for  pid=393 comm="modprobe"
> name="modprobe.d" dev=sda2 ino=58
> scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023
> tcontext=system_u:object_r:modules_conf_t:s0 tclass=dir
> 
> shpchp: Standard Hot Plug PCI Controller Driver version:
> 0.4
> via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald
> Becker
> via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low)
> -> IRQ 23
> eth0: VIA Rhine II at 0xff6ff400, 00:17:31:79:ca:4d, IRQ
> 23.
> 
> eth0: MII PHY found at address 1, status 0x786d advertising
> 01e1 Link 45e1.
> VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level,
> low) -> IRQ 22
> VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
> type=1400 audit(1252909027.568:9): avc:  denied  { read }
> for  pid=695 comm="modprobe"
> name="modprobe.d" dev=sda2 ino=58
> scontext=system_u:system_r:insmod_t:s0
> tcontext=system_u:object_r:modules_conf_t:s0 tclass=dir
> 
> type=1400 audit(1252909027.568:10): avc:  denied  { open
> } for  pid=695 comm="modprobe"
> name="modprobe.d" dev=sda2 ino=58
> scontext=system_u:system_r:insmod_t:s0
> tcontext=system_u:object_r:modules_conf_t:s0 tclass=dir
> 
> type=1400 audit(1252909028.179:11): avc:  denied  { read
> } for  pid=710 comm="modprobe"
> name="modprobe.d" dev=sda2 ino=58
> scontext=system_u:system_r:insmod_t:s0
> tcontext=system_u:object_r:modules_conf_t:s0 tclass=dir
> 
> type=1400 audit(1252909028.179:12): avc:  denied  { open
> } for  pid=710 comm="modprobe"
> name="modprobe.d" dev=sda2 ino=58
> scontext=system_u:system_r:insmod_t:s0
> tcontext=system_u:object_r:modules_conf_t:s0 tclass=dir
> 
> device-mapper: multipath: version 1.1.0 loaded
> EXT4-fs (sda2): internal journal on sda2:8
> EXT4-fs (sdc7): barriers enabled
> kjournald2 starting: pid 795, dev sdc7:8, commit interval 5
> seconds
> EXT4-fs (sdc7): internal journal on sdc7:8
> 
> EXT4-fs (sdc7): delayed allocation enabled
> EXT4-fs: file extents enabled
> EXT4-fs: mballoc enabled
> EXT4-fs (sdc7): mounted filesystem with ordered data mode
> SELinux: initialized (dev sdc7, type ext4), uses xattr
> 
> EXT4-fs (sda6): barriers enabled
> 
> ------------------------------------------------------------------------
> 
> I've spend allot of time searching bugzilla ,fedora
> forum ,dracut pages all around ,and found no related
> problems.
> 
> 
> Do I have to report this one ? And to what party ?
> 
> Sincerely ,
> 
> -- 
> Tack Martin
> 
> 
> 
> 
> -----Inline Attachment Follows-----
> 
> -- 

modprobe.d error/denied avc:

https://bugzilla.redhat.com/show_bug.cgi?id=522918

https://bugzilla.redhat.com/show_bug.cgi?id=523039

It is either one or both of them?

BTW, have you tried booting into level 3 and then startx from there.  I encountered something similar and overcame it using this trick.  I did not report back since I was watching football :(, and apologize in advance.

Regards,

Antonio 


      

-- 
fedora-test-list mailing list
fedora-test-list@xxxxxxxxxx
To unsubscribe: 
https://www.redhat.com/mailman/listinfo/fedora-test-list

[Index of Archives]     [Fedora Desktop]     [Fedora SELinux]     [Photo Sharing]     [Yosemite Forum]     [KDE Users]

  Powered by Linux