palimpsest vs. smartctl

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Since yesterdays rawhide update,  I am getting the 'One or more disks
are failing' icon in the notification area.

When I click on it, the palimpsest utility starts. It says that the
disk has bad sectors. When I click on details, I get
Ata Smart Attributes window, which claims that 'Reallocated Sector
Count' and 'Reallocation Count' fail.

I do not understand the data in the table very well, but what I found
surprising that the Value of Reallocated Sector Count is 0, what does
not seems to me like value which should fail.

I tried to check this with smartctl -a /dev/sda, I get  the output
that can be seen below and which looks quite without problem. Also
smartctl -l error, smartctl -l selftest report no errors.

My question is: Is my disk really failing or  is there some bug in the
reporting software?


Jiri Cerny



Here is the smartctl -a /dev/sda output

smartctl version 5.38 [x86_64-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     FUJITSU MHY2120BH
Serial Number:    K434T81257SL
Firmware Version: 0084000D
User Capacity:    120,034,123,776 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 3f
Local Time is:    Wed Apr 15 10:12:49 2009 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever
					been run.
Total time to complete Offline
data collection: 		 ( 487) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  69) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE
UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   100   100   046    Pre-fail
Always       -       193970
  2 Throughput_Performance  0x0005   100   100   030    Pre-fail
Offline      -       26804224
  3 Spin_Up_Time            0x0003   100   100   025    Pre-fail
Always       -       1
  4 Start_Stop_Count        0x0032   099   099   000    Old_age
Always       -       716
  5 Reallocated_Sector_Ct   0x0033   100   100   024    Pre-fail
Always       -       8589934592000
  7 Seek_Error_Rate         0x000f   100   100   047    Pre-fail
Always       -       2831
  8 Seek_Time_Performance   0x0005   100   100   019    Pre-fail
Offline      -       0
  9 Power_On_Hours          0x0032   096   096   000    Old_age
Always       -       2192
 10 Spin_Retry_Count        0x0013   100   100   020    Pre-fail
Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age
Always       -       630
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age
Always       -       14
193 Load_Cycle_Count        0x0032   098   098   000    Old_age
Always       -       57469
194 Temperature_Celsius     0x0022   100   100   000    Old_age
Always       -       40 (Lifetime Min/Max 15/54)
195 Hardware_ECC_Recovered  0x001a   100   100   000    Old_age
Always       -       53
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age
Always       -       459603968
197 Current_Pending_Sector  0x0012   100   100   000    Old_age
Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age
Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   253   000    Old_age
Always       -       0
200 Multi_Zone_Error_Rate   0x000f   100   100   060    Pre-fail
Always       -       21631
203 Run_Out_Cancel          0x0002   100   100   000    Old_age
Always       -       1533206856120
240 Head_Flying_Hours       0x003e   200   200   000    Old_age
Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining
LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      2187         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

-- 
fedora-test-list mailing list
fedora-test-list@xxxxxxxxxx
To unsubscribe: 
https://www.redhat.com/mailman/listinfo/fedora-test-list

[Index of Archives]     [Fedora Desktop]     [Fedora SELinux]     [Photo Sharing]     [Yosemite Forum]     [KDE Users]

  Powered by Linux