On Fri, 2008-11-14 at 07:08 +0000, Anne Wilson wrote: > On Friday 14 November 2008 06:53:53 Per Bothner wrote: > > The recovered device shows up as eth1 rather than eth0. That's a > > slight blemish. Perhaps this is left-over from when I used a USB > > Ethernet device and that got installed as eth0? Some configuration > > file defines that as eth0? > > Interesting. My eth0 also shows up as eth1, apparently renamed by udev - and > no obvious reason. > > Configured devices: > l0 eth0 wlan0 > Currently active devices: > lo eth1 wmaster0 wlan0 > > Something odd going on here. Indeed...! After plugging in a network cable (I usually run on my wireless connection at home) my laptop - which generated the output file used - shows: Active: eth0 Inactive: pan0 Active: wlan0 Everything looks like you would expect. Not sure what could be going on with your systems. For the record, my T400 is model 2765-T6U. Could that have something to do with it? Cheers, Chris -- ================================== By all means marry; If you get a good wife, you'll be happy. If you get a bad one, you'll become a philosopher. --Socrates -- fedora-test-list mailing list fedora-test-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-test-list
