> > Try:
> >
> > rpm -e --noscripts
> > sazanami-fonts-mincho-0.20040629-3.20061016.fc8
> > rpm -e --noscripts avahi-0.6.17-1.fc7
> > rpm -e --noscripts fonts-japanese-0.20061016-10.fc8
> > rpm -e --noscripts
> > sazanami-fonts-gothic-0.20040629-3.20061016.fc8
> >
> > --
>
Thank you very much this worked! :)
I am fully updated to rawhide. Upon booting the new kernel, I logged on to KDE and opened a terminal to connect to internet, but I could not type anything :( I logged out, and switched to GNOME and opened a terminal and the same thing happened :( I then opened up an editor and then I concluded that the keyboard does not respond :(. I did a dmesg and saw that there was a kernel panic and also wvdial could not connect with the same error I posted here last time. Using an older 2.6.26rc kernel worked to fix that wvdial connection issue.
I will attach dmesg here and hope that it helps me figure what is wrong.
Regards,
Antonio
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.27-0.186.rc0.git15.fc10.i686 (mockbuild@x86-1) (gcc version 4.3.1 20080708 (Red Hat 4.3.1-4) (GCC) ) #1 SMP Sun Jul 27 05:22:35 EDT 2008
PAT disabled. Not yet verified on this CPU type.
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f680000 (usable)
BIOS-e820: 000000003f680000 - 000000003f700000 (ACPI NVS)
BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
last_pfn = 0x3f680 max_arch_pfn = 0x100000
kernel direct mapping tables up to 38000000 @ 7000-c000
Using x86 segment limits to approximate NX protection
RAMDISK: 37c01000 - 37fef43a
DMI present.
ACPI: RSDP 000F75E0, 0014 (r0 TOSCPL)
ACPI: RSDT 3F6888D5, 0054 (r1 TOSCPL TOSCPL00 6040000 LTP 0)
ACPI: FACP 3F690C78, 0074 (r1 TOSCPL CALISTGA 6040000 LOHR 5A)
ACPI: DSDT 3F68A640, 6638 (r1 TOSCPL CALISTGA 6040000 INTL 20060608)
ACPI: FACS 3F691FC0, 0040
ACPI: SLIC 3F690CEC, 0176 (r1 TOSCPL TOSCPL00 6040000 LOHR 0)
ACPI: APIC 3F690E62, 0068 (r1 INTEL CALISTGA 6040000 LOHR 5A)
ACPI: HPET 3F690ECA, 0038 (r1 INTEL CALISTGA 6040000 LOHR 5A)
ACPI: MCFG 3F690F02, 003C (r1 INTEL CALISTGA 6040000 LOHR 5A)
ACPI: BOOT 3F690FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
ACPI: APIC 3F690F70, 0068 (r1 PTLTD APIC 6040000 LTP 0)
ACPI: SSDT 3F689FED, 064F (r1 SataRe SataPri 1000 INTL 20050624)
ACPI: SSDT 3F68995B, 0692 (r1 SataRe SataSec 1000 INTL 20050624)
ACPI: SSDT 3F688EB5, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624)
ACPI: SSDT 3F688E0F, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624)
ACPI: SSDT 3F688929, 04E6 (r1 PmRef CpuPm 3000 INTL 20050624)
ACPI: BIOS bug: multiple APIC/MADT found, using 0
ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@xxxxxxxxxxxxxxx
ACPI: DMI detected: Toshiba
118MB HIGHMEM available.
896MB LOWMEM available.
mapped low ram: 0 - 38000000
low ram: 00000000 - 38000000
bootmap 00008000 - 0000f000
(9 early reservations) ==> bootmem [0000000000 - 0038000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000400000 - 0000c34594] TEXT DATA BSS ==> [0000400000 - 0000c34594]
#4 [0037c01000 - 0037fef43a] RAMDISK ==> [0037c01000 - 0037fef43a]
#5 [0000c35000 - 0000c4a000] INIT_PG_TABLE ==> [0000c35000 - 0000c4a000]
#6 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
#7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
#8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00f7670] 000f7670
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x00038000
HighMem 0x00038000 -> 0x0003f680
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x0003f680
On node 0 totalpages: 259615
free_area_init_node: node 0, pgdat c07a9380, node_mem_map c1001000
DMA zone: 3943 pages, LIFO batch:0
Normal zone: 222200 pages, LIFO batch:31
HighMem zone: 29921 pages, LIFO batch:7
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
PERCPU: Allocating 336436 bytes of per cpu data
NR_CPUS: 32, nr_cpu_ids: 2, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256064
Kernel command line: ro root=LABEL=/ rhgb quiet 3
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c089d000 soft=c087d000
PID hash table entries: 4096 (order: 12, 16384 bytes)
TSC calibrated against PM_TIMER
Detected 1728.993 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8
... MAX_LOCK_DEPTH: 48
... MAX_LOCKDEP_KEYS: 2048
... CLASSHASH_SIZE: 1024
... MAX_LOCKDEP_ENTRIES: 8192
... MAX_LOCKDEP_CHAINS: 16384
... CHAINHASH_SIZE: 8192
memory used by lock dependency info: 1088 kB
per task-struct memory footprint: 2688 bytes
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1009812k/1038848k available (2580k kernel code, 28340k reserved, 1366k data, 620k init, 121344k highmem)
virtual kernel memory layout:
fixmap : 0xffc57000 - 0xfffff000 (3744 kB)
pkmap : 0xff400000 - 0xff800000 (4096 kB)
vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc07df000 - 0xc087a000 ( 620 kB)
.data : 0xc068510c - 0xc07dac78 (1366 kB)
.text : 0xc0400000 - 0xc068510c (2580 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 16 of 16 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
hpet clockevent registered
Calibrating delay loop (skipped), value calculated using timer frequency.. <6>3457.98 BogoMIPS (lpj=1728993)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20080609
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel Genuine Intel(R) CPU T2080 @ 1.73GHz stepping 0c
lockdep: fixing up alternatives.
CPU 1 irqstacks, hard=c089e000 soft=c087e000
Booting processor 1/1 ip 6000
Initializing CPU#1
Calibrating delay using timer specific routine.. <6>3457.87 BogoMIPS (lpj=1728936)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Genuine Intel(R) CPU T2080 @ 1.73GHz stepping 0c
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (6915.85 BogoMIPS).
sizeof(vma)=84 bytes
sizeof(page)=56 bytes
sizeof(inode)=608 bytes
sizeof(dentry)=160 bytes
sizeof(ext3inode)=860 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=184 bytes
sizeof(task_struct)=6064 bytes
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
khelper used greatest stack depth: 2940 bytes left
khelper used greatest stack depth: 2600 bytes left
net_namespace: 896 bytes
Booting paravirtualized kernel on bare hardware
Time: 22:47:25 Date: 07/28/08
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored via DMI
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: GPE storm detected, disabling EC GPE
ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:05:00.0: supports D1
pci 0000:05:00.0: supports D2
pci 0000:05:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:06:04.0: supports D1
pci 0000:06:04.0: supports D2
pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:04.0: PME# disabled
pci 0000:06:04.1: supports D1
pci 0000:06:04.1: supports D2
pci 0000:06:04.1: PME# supported from D0 D1 D2 D3hot
pci 0000:06:04.1: PME# disabled
pci 0000:06:04.2: supports D1
pci 0000:06:04.2: supports D2
pci 0000:06:04.2: PME# supported from D0 D1 D2 D3hot
pci 0000:06:04.2: PME# disabled
pci 0000:06:04.3: supports D1
pci 0000:06:04.3: supports D2
pci 0000:06:04.3: PME# supported from D0 D1 D2 D3hot
pci 0000:06:04.3: PME# disabled
pci 0000:00:1e.0: transparent bridge
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
tracer: 772 pages allocated for 65536 entries of 48 bytes
actual entries 65620
ACPI: RTC can wake from S4
system 00:01: ioport range 0xfe00-0xfe7f has been reserved
system 00:01: ioport range 0xfe80-0xfeff has been reserved
system 00:01: ioport range 0xff00-0xff7f has been reserved
system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved
system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
system 00:06: ioport range 0x800-0x80f has been reserved
system 00:06: ioport range 0x1000-0x107f has been reserved
system 00:06: ioport range 0x1180-0x11bf has been reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0: IO window: 0x2000-0x2fff
pci 0000:00:1c.0: MEM window: 0xd6000000-0xd7ffffff
pci 0000:00:1c.0: PREFETCH window: 0x000000d0000000-0x000000d1ffffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.1: IO window: 0x3000-0x3fff
pci 0000:00:1c.1: MEM window: 0xd8000000-0xd9ffffff
pci 0000:00:1c.1: PREFETCH window: 0x000000d2000000-0x000000d3ffffff
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:05
pci 0000:00:1c.2: IO window: 0x4000-0x4fff
pci 0000:00:1c.2: MEM window: 0xda000000-0xdbffffff
pci 0000:00:1c.2: PREFETCH window: 0x000000d4000000-0x000000d5ffffff
pci 0000:06:04.0: CardBus bridge, secondary bus 0000:07
pci 0000:06:04.0: IO window: 0x005000-0x0050ff
pci 0000:06:04.0: IO window: 0x005400-0x0054ff
pci 0000:06:04.0: PREFETCH window: 0x50000000-0x53ffffff
pci 0000:06:04.0: MEM window: 0x54000000-0x57ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
pci 0000:00:1e.0: IO window: 0x5000-0x5fff
pci 0000:00:1e.0: MEM window: 0xdc000000-0xdc0fffff
pci 0000:00:1e.0: PREFETCH window: 0x00000050000000-0x00000053ffffff
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.0 to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.1 to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
pci 0000:06:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
debug: unmapping init memory f7c01000..f7ff0000
Simple Boot Flag at 0x36 set to 0x1
apm: BIOS not found.
audit: initializing netlink socket (disabled)
type=2000 audit(1217285246.176:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1735
SELinux: Registering netfilter hooks
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x3f00
pci 0000:00:1d.0: Performing full reset
pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2000
pci 0000:00:1d.1: Performing full reset
pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000
pci 0000:00:1d.2: Performing full reset
pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x2000
pci 0000:00:1d.3: Performing full reset
PCI: Setting latency timer of device 0000:00:1c.0 to 64
pcieport-driver 0000:00:1c.0: found MSI capability
pci_express 0000:00:1c.0:pcie00: allocate port service
pci_express 0000:00:1c.0:pcie02: allocate port service
pci_express 0000:00:1c.0:pcie03: allocate port service
PCI: Setting latency timer of device 0000:00:1c.1 to 64
pcieport-driver 0000:00:1c.1: found MSI capability
pci_express 0000:00:1c.1:pcie00: allocate port service
pci_express 0000:00:1c.1:pcie02: allocate port service
pci_express 0000:00:1c.1:pcie03: allocate port service
PCI: Setting latency timer of device 0000:00:1c.2 to 64
pcieport-driver 0000:00:1c.2: found MSI capability
pci_express 0000:00:1c.2:pcie00: allocate port service
pci_express 0000:00:1c.2:pcie02: allocate port service
pci_express 0000:00:1c.2:pcie03: allocate port service
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID0]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button (CM) [PWRB]
ACPI: SSDT 3F68965B, 0238 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
ACPI: SSDT 3F689114, 04C2 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI0007:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 3F689893, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
ACPI: SSDT 3F6895D6, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI0007:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
agpgart: Detected an Intel 945GM Chipset.
agpgart: Detected 7932K stolen memory.
agpgart: AGP aperture is 256M @ 0xc0000000
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
brd: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input3
Driver 'sd' needs updating - please use bus_type methods
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
Marking TSC unstable due to TSC halts in idle
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Magic number: 0:681:806
debug: unmapping init memory c07df000..c087a000
Write protecting the kernel read-only data: 1124k
ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
drivers/usb/core/inode.c: creating file 'devices'
drivers/usb/core/inode.c: creating file '001'
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
ehci_hcd 0000:00:1d.7: reset command 080022 (park)=0 ithresh=8 Async period=1024 Reset HALT
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: supports USB remote wakeup
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdc444000
ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: default language 0x0409
usb usb1: uevent
usb usb1: usb_probe_device
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
usb 1-0:1.0: uevent
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: power on to power good time: 20ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: trying to enable port power on non-switchable hub
ehci_hcd 0000:00:1d.7: GetStatus port 5 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 5: status 0501 change 0001
hub 1-0:1.0: state 7 ports 8 chg 0020 evt 0000
drivers/usb/core/inode.c: creating file '001'
hub 1-0:1.0: port 5, status 0501, change 0000, 480 Mb/s
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.27-0.186.rc0.git15.fc10.i686 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
modprobe used greatest stack depth: 1436 bytes left
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0
synaptics: Toshiba Satellite A135 detected, limiting rate to 40pps.
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd: block sizes: ed 64 td 64
USB Universal Host Controller Interface driver v3.0
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
drivers/usb/core/inode.c: creating file '002'
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.0: Performing full reset
uhci_hcd 0000:00:1d.0: supports USB remote wakeup
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
usb usb2: default language 0x0409
usb usb2: uevent
usb usb2: usb_probe_device
usb usb2: configuration #1 chosen from 1 choice
usb usb2: adding 2-0:1.0 (config #1, interface 0)
usb 2-0:1.0: uevent
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: individual port over-current protection
hub 2-0:1.0: power on to power good time: 2ms
hub 2-0:1.0: local power source is good
hub 2-0:1.0: trying to enable port power on non-switchable hub
ehci_hcd 0000:00:1d.7: port 5 full speed --> companion
ehci_hcd 0000:00:1d.7: GetStatus port 5 status 003801 POWER OWNER sig=j CONNECT
hub 1-0:1.0: port 5 not reset yet, waiting 50ms
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5
ehci_hcd 0000:00:1d.7: GetStatus port 5 status 003002 POWER OWNER sig=se0 CSC
hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0020
hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
drivers/usb/core/inode.c: creating file '001'
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.27-0.186.rc0.git15.fc10.i686 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
drivers/usb/core/inode.c: creating file '003'
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.1: Performing full reset
uhci_hcd 0000:00:1d.1: supports USB remote wakeup
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
usb usb3: default language 0x0409
usb usb3: uevent
usb usb3: usb_probe_device
usb usb3: configuration #1 chosen from 1 choice
usb usb3: adding 3-0:1.0 (config #1, interface 0)
usb 3-0:1.0: uevent
hub 3-0:1.0: usb_probe_interface
hub 3-0:1.0: usb_probe_interface - got id
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hub 3-0:1.0: standalone hub
hub 3-0:1.0: no power switching (usb 1.0)
hub 3-0:1.0: individual port over-current protection
hub 3-0:1.0: power on to power good time: 2ms
hub 3-0:1.0: local power source is good
hub 3-0:1.0: trying to enable port power on non-switchable hub
hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
drivers/usb/core/inode.c: creating file '001'
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.27-0.186.rc0.git15.fc10.i686 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
drivers/usb/core/inode.c: creating file '004'
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.2: Performing full reset
uhci_hcd 0000:00:1d.2: supports USB remote wakeup
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
usb usb4: default language 0x0409
usb usb4: uevent
usb usb4: usb_probe_device
usb usb4: configuration #1 chosen from 1 choice
usb usb4: adding 4-0:1.0 (config #1, interface 0)
usb 4-0:1.0: uevent
hub 4-0:1.0: usb_probe_interface
hub 4-0:1.0: usb_probe_interface - got id
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
hub 4-0:1.0: standalone hub
hub 4-0:1.0: no power switching (usb 1.0)
hub 4-0:1.0: individual port over-current protection
hub 4-0:1.0: power on to power good time: 2ms
hub 4-0:1.0: local power source is good
hub 4-0:1.0: trying to enable port power on non-switchable hub
uhci_hcd 0000:00:1d.2: port 1 portsc 009b,00
hub 4-0:1.0: port 1: status 0101 change 0003
hub 4-0:1.0: state 7 ports 2 chg 0002 evt 0000
drivers/usb/core/inode.c: creating file '001'
hub 4-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.27-0.186.rc0.git15.fc10.i686 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
drivers/usb/core/inode.c: creating file '005'
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: detected 2 ports
uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.3: Performing full reset
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
usb usb5: default language 0x0409
usb usb5: uevent
usb usb5: usb_probe_device
usb usb5: configuration #1 chosen from 1 choice
usb usb5: adding 5-0:1.0 (config #1, interface 0)
usb 5-0:1.0: uevent
hub 5-0:1.0: usb_probe_interface
hub 5-0:1.0: usb_probe_interface - got id
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
hub 5-0:1.0: standalone hub
hub 5-0:1.0: no power switching (usb 1.0)
hub 5-0:1.0: individual port over-current protection
hub 5-0:1.0: power on to power good time: 2ms
hub 5-0:1.0: local power source is good
hub 5-0:1.0: trying to enable port power on non-switchable hub
usb 4-1: new full speed USB device using uhci_hcd and address 2
drivers/usb/core/inode.c: creating file '001'
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.27-0.186.rc0.git15.fc10.i686 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
pata_acpi 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.2 to 64
pata_acpi 0000:00:1f.2: PCI INT B disabled
usb 4-1: skipped 4 descriptors after interface
usb 4-1: default language 0x0409
usb 4-1: uevent
usb 4-1: usb_probe_device
usb 4-1: configuration #1 chosen from 1 choice
usb 4-1: adding 4-1:1.0 (config #1, interface 0)
usb 4-1:1.0: uevent
usb 4-1: adding 4-1:1.1 (config #1, interface 1)
usb 4-1:1.1: uevent
usb 4-1: adding 4-1:1.2 (config #1, interface 2)
usb 4-1:1.2: uevent
drivers/usb/core/inode.c: creating file '002'
usb 4-1: New USB device found, idVendor=0d08, idProduct=0300
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: UTStarcom UM100
usb 4-1: Manufacturer: UTStarcom, Incorporated
hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
usb usb2: suspend_rh (auto-stop)
usb usb3: suspend_rh (auto-stop)
usb usb5: suspend_rh (auto-stop)
hub 1-0:1.0: hub_suspend
usb usb1: bus auto-suspend
ehci_hcd 0000:00:1d.7: suspend root hub
hub 2-0:1.0: hub_suspend
usb usb2: bus auto-suspend
usb usb2: suspend_rh
hub 3-0:1.0: hub_suspend
usb usb3: bus auto-suspend
usb usb3: suspend_rh
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18b0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18b8 irq 15
hub 5-0:1.0: hub_suspend
usb usb5: bus auto-suspend
usb usb5: suspend_rh
ata1.00: ATA-7: Hitachi HTS541612J9SA00, SBDOC7DP, max UDMA/100
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/100
ata2.00: ATAPI: HL-DT-ST DVDRAM GMA-4082N, PT06, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SBDO PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GMA-4082N PT06 PQ: 0 ANSI: 5
scsi 1:0:0:0: Attached scsi generic sg1 type 5
modprobe used greatest stack depth: 752 bytes left
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@xxxxxxxxxx
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
type=1404 audit(1217285254.462:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 8192 avtab hash slots, 167934 rules.
SELinux: 8192 avtab hash slots, 167934 rules.
SELinux: 8 users, 13 roles, 2446 types, 118 bools, 1 sens, 1024 cats
SELinux: 73 classes, 167934 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1217285255.776:3): policy loaded auid=4294967295 ses=4294967295
usb usb2: uevent
usb 2-0:1.0: uevent
usb usb3: uevent
usb 3-0:1.0: uevent
usb usb4: uevent
usb 4-0:1.0: uevent
usb 4-1: uevent
usb 4-1:1.0: uevent
usb 4-1:1.1: uevent
usb 4-1:1.2: uevent
usb usb5: uevent
usb 5-0:1.0: uevent
usb usb1: uevent
usb 1-0:1.0: uevent
cdc_acm 4-1:1.0: usb_probe_interface
cdc_acm 4-1:1.0: usb_probe_interface - got id
cdc_acm 4-1:1.0: ttyACM0: USB ACM device
usbcore: registered new interface driver cdc_acm
cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:05:00.0 to 64
r8169 0000:05:00.0: no MSI. Back to INTx.
eth0: RTL8101e at 0xf884e000, 00:16:d4:97:4a:58, XID 34000000 IRQ 18
acpi device:04: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input6
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
acpi device:0a: registered as cooling_device3
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:07/input/input7
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
intel_rng: FWH not detected
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ALSA sound/pci/hda/hda_intel.c:2069: chipset global capabilities = 0x4401
ALSA sound/pci/hda/hda_intel.c:754: codec_mask = 0x3
ALSA sound/pci/hda/hda_codec.c:2325: hda_codec: model '3stack' is selected
ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Surround Playback Volume, skipped
ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Center Playback Volume, skipped
ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave LFE Playback Volume, skipped
ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Side Playback Volume, skipped
ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Headphone Playback Volume, skipped
ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Speaker Playback Volume, skipped
ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Mono Playback Volume, skipped
ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Line-Out Playback Volume, skipped
ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Surround Playback Switch, skipped
ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Center Playback Switch, skipped
ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave LFE Playback Switch, skipped
ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Side Playback Switch, skipped
ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Speaker Playback Switch, skipped
ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Mono Playback Switch, skipped
ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave IEC958 Playback Switch, skipped
firewire_ohci 0000:06:04.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
firewire_ohci: Added fw-ohci device 0000:06:04.1, OHCI version 1.10
sdhci-pci 0000:06:04.3: SDHCI controller found [104c:803c] (rev 0)
sdhci-pci 0000:06:04.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Registered led device: mmc0
mmc0: SDHCI controller on PCI [0000:06:04.3] using DMA
tifm_7xx1 0000:06:04.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
input: PC Speaker as /devices/platform/pcspkr/input/input8
Yenta: CardBus bridge found at 0000:06:04.0 [1179:ff00]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:06:04.0, mfunc 0x10aa1b22, devctl 0x64
Driver 'sr' needs updating - please use bus_type methods
Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#06) from #06 to #0a
pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
cs: IO port probe 0x5000-0x5fff: clean.
pcmcia: parent PCI bridge Memory window: 0xdc000000 - 0xdc0fffff
pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
firewire_core: created device fw0: GUID 00023f73a840c4cc, S400
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ACPI: I/O resource 0000:00:1f.3 [0x18c0-0x18df] conflicts with ACPI region SMBI [0x18c0-0x18cf]
ACPI: Device needs an ACPI driver
udev: renamed network interface eth0 to eth1
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda3, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 2031608k swap on /dev/mapper/VolGroup01-LogVol01. Priority:-1 extents:1 across:2031608k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
IA-32 Microcode Update Driver: v1.14a <tigran@xxxxxxxxxxxxxxxxxxxx>
firmware: requesting intel-ucode/06-0e-0c
firmware: requesting intel-ucode/06-0e-0c
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
type=1400 audit(1217303277.078:4): avc: denied { write } for pid=1826 comm="ip6tables-resto" path="/0" dev=devpts ino=2 scontext=system_u:system_r:iptables_t:s0 tcontext=system_u:object_r:devpts_t:s0 tclass=chr_file
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
Clocksource tsc unstable (delta = -118290055 ns)
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
fuse init (API version 7.9)
SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
iscsi: registered transport (iser)
Bluetooth: Core ver 2.12
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.10
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.10
ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x1800, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x4
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x5
r8169: eth1: link down
ADDRCONF(NETDEV_UP): eth1: link is not ready
ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x4
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x5
[drm] Initialized drm 1.1.0 20060810
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:02.0 to 64
[drm] Initialized i915 1.6.0 20060119 on minor 0
SELinux: Context system_u:object_r:user_gconf_home_t:s0 is not valid (left unmapped).
SELinux: Context unconfined_u:object_r:user_gconf_home_t:s0 is not valid (left unmapped).
ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x9, stream=0x1, channel=0, format=0x4011
ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x9, stream=0x1, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x9
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x9
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x4
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x5
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x4
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x5
SELinux: Context system_u:object_r:user_gnome_home_t:s0 is not valid (left unmapped).
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x4
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x5
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x9
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x4
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x5
ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x31
BUG: unable to handle kernel NULL pointer dereference at 00000002
IP: [<c0428025>] sched_mc_power_savings_store+0x1/0x2f
*pde = 1c8ef067 *pte = 00000000
Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
Modules linked in: i915 drm rfcomm l2cap bluetooth ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp libiscsi scsi_transport_iscsi autofs4 fuse sunrpc nf_conntrack_netbios_ns nf_conntrack_ipv4 xt_state nf_conntrack ipt_REJECT iptable_filter ip_tables xt_tcpudp ip6t_REJECT ip6table_filter ip6_tables x_tables ipv6 cpufreq_ondemand acpi_cpufreq sr_mod i2c_i801 yenta_socket pcspkr joydev i2c_core rsrc_nonstatic tifm_7xx1 cdrom serio_raw sdhci_pci firewire_ohci firewire_core snd_hda_intel sdhci snd_seq_dummy tifm_core crc_itu_t iTCO_wdt mmc_core iTCO_vendor_support snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss battery snd_pcm ac video snd_timer output snd_page_alloc snd_hwdep snd r8169 soundcore cdc_acm dm_snapshot dm_zero dm_mirror dm_log dm_mod ata_piix ata_generic pata_acpi ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: microcode]
Pid: 3283, comm: sched-powersave Not tainted (2.6.27-0.186.rc0.git15.fc10.i686 #1)
EIP: 0060:[<c0428025>] EFLAGS: 00010286 CPU: 0
EIP is at sched_mc_power_savings_store+0x1/0x2f
EAX: c07bd4b0 EBX: c0428024 ECX: 00000002 EDX: dcb59000
ESI: c07bd4f0 EDI: dcb59000 EBP: e76caf44 ESP: e76caf30
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process sched-powersave (pid: 3283, ti=e76ca000 task=dcb197e0 task.ti=e76ca000)
Stack: e76caf44 c058c20b c07bd14c f781e7e8 dcb22160 e76caf74 c04d8b5e 00000002
00000002 b7f5f000 dc89fa00 dcb22174 c07bd14c c07bd4f0 00000002 dc89fa00
c04d8aa0 e76caf90 c049b79d e76caf9c b7f5f000 dc89fa00 fffffff7 b7f5f000
Call Trace:
[<c058c20b>] ? sysdev_class_store+0x25/0x2a
[<c04d8b5e>] ? sysfs_write_file+0xbe/0xe9
[<c04d8aa0>] ? sysfs_write_file+0x0/0xe9
[<c049b79d>] ? vfs_write+0x89/0xe4
[<c049b89b>] ? sys_write+0x40/0x65
[<c0403cbe>] ? syscall_call+0x7/0xb
[<c068007b>] ? __mutex_unlock_slowpath+0xe9/0x108
=======================
Code: c0 01 76 0d 8d 43 40 ba b4 41 7a c0 e8 81 10 0b 00 5b 5d c3 55 89 e5 e8 be 5b 00 00 e8 ad 5e 03 00 e8 69 5b 00 00 31 c0 5d c3 55 <8a> 09 ba ea ff ff ff 89 e5 8d 41 d0 3c 01 77 1a 31 c0 80 f9 31
EIP: [<c0428025>] sched_mc_power_savings_store+0x1/0x2f SS:ESP 0068:e76caf30
---[ end trace e9dee16a49eebe40 ]---
ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x31
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x4
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x5
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x4
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x5
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x4
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x5
ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x31
ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x31
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x4
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x5
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x4
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x5
ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x9, stream=0x1, channel=0, format=0x4011
ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x9, stream=0x1, channel=0, format=0x4011
ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x9
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x9
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x4
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x5
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x4
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x5
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x4
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x5
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x9
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x4
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x5
ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x31
BUG: unable to handle kernel NULL pointer dereference at 00000002
IP: [<c0428025>] sched_mc_power_savings_store+0x1/0x2f
*pde = 2e11c067 *pte = 00000000
Oops: 0000 [#2] SMP DEBUG_PAGEALLOC
Modules linked in: i915 drm rfcomm l2cap bluetooth ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp libiscsi scsi_transport_iscsi autofs4 fuse sunrpc nf_conntrack_netbios_ns nf_conntrack_ipv4 xt_state nf_conntrack ipt_REJECT iptable_filter ip_tables xt_tcpudp ip6t_REJECT ip6table_filter ip6_tables x_tables ipv6 cpufreq_ondemand acpi_cpufreq sr_mod i2c_i801 yenta_socket pcspkr joydev i2c_core rsrc_nonstatic tifm_7xx1 cdrom serio_raw sdhci_pci firewire_ohci firewire_core snd_hda_intel sdhci snd_seq_dummy tifm_core crc_itu_t iTCO_wdt mmc_core iTCO_vendor_support snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss battery snd_pcm ac video snd_timer output snd_page_alloc snd_hwdep snd r8169 soundcore cdc_acm dm_snapshot dm_zero dm_mirror dm_log dm_mod ata_piix ata_generic pata_acpi ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: microcode]
Pid: 3922, comm: sched-powersave Tainted: G D (2.6.27-0.186.rc0.git15.fc10.i686 #1)
EIP: 0060:[<c0428025>] EFLAGS: 00010286 CPU: 1
EIP is at sched_mc_power_savings_store+0x1/0x2f
EAX: c07bd4b0 EBX: c0428024 ECX: 00000002 EDX: ee1b1000
ESI: c07bd4f0 EDI: ee1b1000 EBP: ee0e6f44 ESP: ee0e6f30
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process sched-powersave (pid: 3922, ti=ee0e6000 task=ee2c0000 task.ti=ee0e6000)
Stack: ee0e6f44 c058c20b c07bd14c f781e7e8 f474b8f0 ee0e6f74 c04d8b5e 00000002
00000002 b7fb2000 ee05e900 f474b904 c07bd14c c07bd4f0 00000002 ee05e900
c04d8aa0 ee0e6f90 c049b79d ee0e6f9c b7fb2000 ee05e900 fffffff7 b7fb2000
Call Trace:
[<c058c20b>] ? sysdev_class_store+0x25/0x2a
[<c04d8b5e>] ? sysfs_write_file+0xbe/0xe9
[<c04d8aa0>] ? sysfs_write_file+0x0/0xe9
[<c049b79d>] ? vfs_write+0x89/0xe4
[<c049b89b>] ? sys_write+0x40/0x65
[<c0403cbe>] ? syscall_call+0x7/0xb
[<c068007b>] ? __mutex_unlock_slowpath+0xe9/0x108
=======================
Code: c0 01 76 0d 8d 43 40 ba b4 41 7a c0 e8 81 10 0b 00 5b 5d c3 55 89 e5 e8 be 5b 00 00 e8 ad 5e 03 00 e8 69 5b 00 00 31 c0 5d c3 55 <8a> 09 ba ea ff ff ff 89 e5 8d 41 d0 3c 01 77 1a 31 c0 80 f9 31
EIP: [<c0428025>] sched_mc_power_savings_store+0x1/0x2f SS:ESP 0068:ee0e6f30
---[ end trace e9dee16a49eebe40 ]---
ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x31
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x4
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x5
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x4
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x5
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x4
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x5
ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x31
ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x31
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x4
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x5
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x4
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x5
ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x9, stream=0x1, channel=0, format=0x4011
ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x9, stream=0x1, channel=0, format=0x4011
ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x4011
SELinux: Context unconfined_u:object_r:user_gnome_home_t:s0 is not valid (left unmapped).
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x9
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x9
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x4
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x5
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x4
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x5
gvfsd-trash[4429]: segfault at 4f9726 ip 004f9726 sp bf8c5b90 error 4 in libdbus-1.so.3.4.0[9f8000+3f000]
Bluetooth: BNEP (Ethernet Emulation) ver 1.2
Bluetooth: BNEP filters: protocol multicast
Bridge firewalling registered
pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
BUG: unable to handle kernel NULL pointer dereference at 00000002
IP: [<c0428025>] sched_mc_power_savings_store+0x1/0x2f
*pde = 2d340067 *pte = 00000000
Oops: 0000 [#3] SMP DEBUG_PAGEALLOC
Modules linked in: bridge stp bnep i915 drm rfcomm l2cap bluetooth ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp libiscsi scsi_transport_iscsi autofs4 fuse sunrpc nf_conntrack_netbios_ns nf_conntrack_ipv4 xt_state nf_conntrack ipt_REJECT iptable_filter ip_tables xt_tcpudp ip6t_REJECT ip6table_filter ip6_tables x_tables ipv6 cpufreq_ondemand acpi_cpufreq sr_mod i2c_i801 yenta_socket pcspkr joydev i2c_core rsrc_nonstatic tifm_7xx1 cdrom serio_raw sdhci_pci firewire_ohci firewire_core snd_hda_intel sdhci snd_seq_dummy tifm_core crc_itu_t iTCO_wdt mmc_core iTCO_vendor_support snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss battery snd_pcm ac video snd_timer output snd_page_alloc snd_hwdep snd r8169 soundcore cdc_acm dm_snapshot dm_zero dm_mirror dm_log dm_mod ata_piix ata_generic pata_acpi ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: microcode]
Pid: 4515, comm: sched-powersave Tainted: G D (2.6.27-0.186.rc0.git15.fc10.i686 #1)
EIP: 0060:[<c0428025>] EFLAGS: 00010286 CPU: 0
EIP is at sched_mc_power_savings_store+0x1/0x2f
EAX: c07bd4b0 EBX: c0428024 ECX: 00000002 EDX: ed2e1000
ESI: c07bd4f0 EDI: ed2e1000 EBP: ed35cf44 ESP: ed35cf30
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process sched-powersave (pid: 4515, ti=ed35c000 task=ee2147a0 task.ti=ed35c000)
Stack: ed35cf44 c058c20b c07bd14c f781e7e8 f2def210 ed35cf74 c04d8b5e 00000002
00000002 b7f4a000 ed385200 f2def224 c07bd14c c07bd4f0 00000002 ed385200
c04d8aa0 ed35cf90 c049b79d ed35cf9c b7f4a000 ed385200 fffffff7 b7f4a000
Call Trace:
[<c058c20b>] ? sysdev_class_store+0x25/0x2a
[<c04d8b5e>] ? sysfs_write_file+0xbe/0xe9
[<c04d8aa0>] ? sysfs_write_file+0x0/0xe9
[<c049b79d>] ? vfs_write+0x89/0xe4
[<c049b89b>] ? sys_write+0x40/0x65
[<c0403cbe>] ? syscall_call+0x7/0xb
[<c068007b>] ? __mutex_unlock_slowpath+0xe9/0x108
=======================
Code: c0 01 76 0d 8d 43 40 ba b4 41 7a c0 e8 81 10 0b 00 5b 5d c3 55 89 e5 e8 be 5b 00 00 e8 ad 5e 03 00 e8 69 5b 00 00 31 c0 5d c3 55 <8a> 09 ba ea ff ff ff 89 e5 8d 41 d0 3c 01 77 1a 31 c0 80 f9 31
EIP: [<c0428025>] sched_mc_power_savings_store+0x1/0x2f SS:ESP 0068:ed35cf30
---[ end trace e9dee16a49eebe40 ]---
BUG: unable to handle kernel NULL pointer dereference at 00000002
IP: [<c0428025>] sched_mc_power_savings_store+0x1/0x2f
*pde = 2aa4a067 *pte = 00000000
Oops: 0000 [#4] SMP DEBUG_PAGEALLOC
Modules linked in: bridge stp bnep i915 drm rfcomm l2cap bluetooth ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp libiscsi scsi_transport_iscsi autofs4 fuse sunrpc nf_conntrack_netbios_ns nf_conntrack_ipv4 xt_state nf_conntrack ipt_REJECT iptable_filter ip_tables xt_tcpudp ip6t_REJECT ip6table_filter ip6_tables x_tables ipv6 cpufreq_ondemand acpi_cpufreq sr_mod i2c_i801 yenta_socket pcspkr joydev i2c_core rsrc_nonstatic tifm_7xx1 cdrom serio_raw sdhci_pci firewire_ohci firewire_core snd_hda_intel sdhci snd_seq_dummy tifm_core crc_itu_t iTCO_wdt mmc_core iTCO_vendor_support snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss battery snd_pcm ac video snd_timer output snd_page_alloc snd_hwdep snd r8169 soundcore cdc_acm dm_snapshot dm_zero dm_mirror dm_log dm_mod ata_piix ata_generic pata_acpi ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: microcode]
Pid: 4527, comm: sched-powersave Tainted: G D (2.6.27-0.186.rc0.git15.fc10.i686 #1)
EIP: 0060:[<c0428025>] EFLAGS: 00010286 CPU: 0
EIP is at sched_mc_power_savings_store+0x1/0x2f
EAX: c07bd4b0 EBX: c0428024 ECX: 00000002 EDX: ee2b5000
ESI: c07bd4f0 EDI: ee2b5000 EBP: ed39ff44 ESP: ed39ff30
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process sched-powersave (pid: 4527, ti=ed39f000 task=ed2d5f80 task.ti=ed39f000)
Stack: ed39ff44 c058c20b c07bd14c f781e7e8 f2defd10 ed39ff74 c04d8b5e 00000002
00000002 b7fba000 eaaa8000 f2defd24 c07bd14c c07bd4f0 00000002 eaaa8000
c04d8aa0 ed39ff90 c049b79d ed39ff9c b7fba000 eaaa8000 fffffff7 b7fba000
Call Trace:
[<c058c20b>] ? sysdev_class_store+0x25/0x2a
[<c04d8b5e>] ? sysfs_write_file+0xbe/0xe9
[<c04d8aa0>] ? sysfs_write_file+0x0/0xe9
[<c049b79d>] ? vfs_write+0x89/0xe4
[<c049b89b>] ? sys_write+0x40/0x65
[<c0403cbe>] ? syscall_call+0x7/0xb
[<c068007b>] ? __mutex_unlock_slowpath+0xe9/0x108
=======================
Code: c0 01 76 0d 8d 43 40 ba b4 41 7a c0 e8 81 10 0b 00 5b 5d c3 55 89 e5 e8 be 5b 00 00 e8 ad 5e 03 00 e8 69 5b 00 00 31 c0 5d c3 55 <8a> 09 ba ea ff ff ff 89 e5 8d 41 d0 3c 01 77 1a 31 c0 80 f9 31
EIP: [<c0428025>] sched_mc_power_savings_store+0x1/0x2f SS:ESP 0068:ed39ff30
---[ end trace e9dee16a49eebe40 ]---
uhci_hcd 0000:00:1d.2: reserve dev 2 ep81-INT, period 32, phase 16, 23 us
PPP generic driver version 2.4.2
uhci_hcd 0000:00:1d.2: release dev 2 ep81-INT, period 32, phase 16, 23 us
uhci_hcd 0000:00:1d.2: reserve dev 2 ep81-INT, period 32, phase 16, 23 us
uhci_hcd 0000:00:1d.2: release dev 2 ep81-INT, period 32, phase 16, 23 us
uhci_hcd 0000:00:1d.2: reserve dev 2 ep81-INT, period 32, phase 16, 23 us
uhci_hcd 0000:00:1d.2: release dev 2 ep81-INT, period 32, phase 16, 23 us
uhci_hcd 0000:00:1d.2: reserve dev 2 ep81-INT, period 32, phase 16, 23 us
uhci_hcd 0000:00:1d.2: release dev 2 ep81-INT, period 32, phase 16, 23 us
uhci_hcd 0000:00:1d.2: reserve dev 2 ep81-INT, period 32, phase 16, 23 us
uhci_hcd 0000:00:1d.2: release dev 2 ep81-INT, period 32, phase 16, 23 us
uhci_hcd 0000:00:1d.2: reserve dev 2 ep81-INT, period 32, phase 16, 23 us
uhci_hcd 0000:00:1d.2: release dev 2 ep81-INT, period 32, phase 16, 23 us
usb usb1: usb resume
ehci_hcd 0000:00:1d.7: resume root hub
hub 1-0:1.0: hub_resume
ehci_hcd 0000:00:1d.7: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 3: status 0501 change 0001
hub 1-0:1.0: state 7 ports 8 chg 0008 evt 0000
hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
ehci_hcd 0000:00:1d.7: port 3 high speed
ehci_hcd 0000:00:1d.7: GetStatus port 3 status 001005 POWER sig=se0 PE CONNECT
usb 1-3: new high speed USB device using ehci_hcd and address 3
ehci_hcd 0000:00:1d.7: port 3 high speed
ehci_hcd 0000:00:1d.7: GetStatus port 3 status 001005 POWER sig=se0 PE CONNECT
usb 1-3: default language 0x0409
usb 1-3: uevent
usb 1-3: usb_probe_device
usb 1-3: configuration #1 chosen from 1 choice
usb 1-3: adding 1-3:1.0 (config #1, interface 0)
usb 1-3:1.0: uevent
drivers/usb/core/inode.c: creating file '003'
usb 1-3: New USB device found, idVendor=154b, idProduct=0002
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: USB 2.0 FD
usb 1-3: Manufacturer: PNY
usb 1-3: SerialNumber: 6E621400A938
Initializing USB Mass Storage driver...
usb-storage 1-3:1.0: usb_probe_interface
usb-storage 1-3:1.0: usb_probe_interface - got id
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 2:0:0:0: Direct-Access PNY USB 2.0 FD PMAP PQ: 0 ANSI: 0 CCS
sd 2:0:0:0: [sdb] 251904 512-byte hardware sectors (129 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] 251904 512-byte hardware sectors (129 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI removable disk
sd 2:0:0:0: Attached scsi generic sg2 type 0
SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts
--
fedora-test-list mailing list
fedora-test-list@xxxxxxxxxx
To unsubscribe:
https://www.redhat.com/mailman/listinfo/fedora-test-list
