Neal Becker <ndbecker2@xxxxxxxxx> : [...] > My wired r8169 stopped working. The driver is loaded - I don't see any > errors. tcpdump reports nothing (except my own dhcp requests). NM won't > connect. > > Booted 2.6.25-14.fc9.x86_64. Works. > > I have repeated this several times. Can you configure the IP address by hand and see if some traffic flows ? If not, assuming you have a 8168 (which should be clear from the line including the 'XID' comment in the dmesg of your kernel), it could be worth to give the kernel a 'noapic, pci=nomsi' option at boot time. > One thing I don't understand - I'm sure r8169 has been working for me for > quite a while after that last kernel update. > > One thing - I DID get a bunch of yum updates last night - but none seem to > be relevant. The driver itself stood the same and the kernel has not changed much from 2.6.25 (2.6.25-14.fc9.x86_64) to 2.6.25.2 (kernel-2.6.25.3-18.fc9.x86_64). Something _must_ have changed though. -- Ueimor -- fedora-test-list mailing list fedora-test-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-test-list
