El dv 02 de 05 del 2008 a les 12:57 +0300, en/na shmuel siegel va escriure: > Josep Puigdemont wrote: > > Hi, > > > > I was testing preupgrade (F8->rawhide), and I hit a couple of problems: > > > > The first issues was that the hard drive units in F8 have a different > > order in F9 (at least for my HW [1]), so /dev/sda in F8 becomes /dev/sdb > > in F9, and this makes the installer complain that it doesn't find the > > upgrade images. > > I solved this changing sda6 to sdb6 in the following line > > in /boot/grub/menu.lst: > > stage2=hd:sda6:/upgrade/minstg2.img > > If I didn't change this anaconda would ask me for the location of the > > ISO image, which seems to default to /upgrade/minstg2.img. > > > > > > With the changes mentioned above, Anaconda starts (in text mode), and > > goes on as to let me configure grub, but then it pops up the following > > error message: > > "Unable to read group information from repositories. This is a problem > > with the generation of your install tree." > > I can then choose to either "exit installer" or "retry". Every time I > > hit "retry" the following error is printed on the console: > > ERROR: Error running /usr/sbin/lspci: No such file or directory > > > > I used preupgrade-0.9.2-1.fc8. > > > > /Josep > > > > [1] > > http://www.smolts.org/client/show/pub_c348ef55-d532-4197-afac-be8e3690c35e > > > > > I've been having the same problem as your second problem. See the above > thread "preupdate won't update". Are you also using volume groups? In my case I only use ext3 partitions without LVM. Following indications in your thread, I removed comps.xml (and comps.xml.gz), and then the installer tries to retrieve the list from the net, except that the network is not yet up, and it fails. I did not manage to get an IP by executing dhclient from the command line, I'll try with static IP later (I need to install a router first). /Josep -- fedora-test-list mailing list fedora-test-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-test-list
