On Thu, Mar 27, 2008 at 10:40 AM, Kevin DeKorte <kdekorte@xxxxxxxxx> wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > > > Gerry Tool wrote: > | My Epson Perfection 4490 Photo scanner is once again only working as > | root. It works fine as a normal usr in F8 and I think it did in F9 > | Alpha. > | > | Root can access the scanner using either iscan or xsane. My normal > | user account can not with either. > | > | This scanner uses the epkowa backend provided by the iscan package > | from Epson. I cannot detect any differences between my F8 and my F9 > | Beta setups. > | > | Scanner on Fedora 8 > | ------------------------- > | [root@f8 gerry]# sane-find-scanner > | > | # sane-find-scanner will now attempt to detect your scanner. If the > | # result is different from what you expected, first make sure your > | # scanner is powered up and properly connected to your computer. > | > | # No SCSI scanners found. If you expected something different, make > sure that > | # you have loaded a kernel SCSI driver for your SCSI adapter. > | > | found USB scanner (vendor=0x04b8 [EPSON], product=0x0119 [EPSON > | Scanner]) at lib usb:001:003 > | # Your USB scanner was (probably) detected. It may or may not be > supported by > | # SANE. Try scanimage -L and read the backend's manpage. > | > | [root@f8 gerry]# ls -l /proc/bus/usb/001 > | total 0 > | -rw-r--r-- 1 root root 43 2008-03-27 04:02 001 > | -rw-r--r-- 1 root root 50 2008-03-27 04:02 003 > | -rw-r--r-- 1 root root 50 2008-03-27 04:02 004 > | > | [root@f8 gerry]# diff /etc/sane.d/epkowa.conf > /mnt/f9beta/etc/sane.d/epkowa.conf > | [root@f8 gerry]# diff /etc/sane.d/epson.conf > /mnt/f9beta/etc/sane.d/epson.conf > | > | [root@f8 gerry]# scanimage -L > | device `epkowa:libusb:001:003' is a Epson Perfection 4490 flatbed scanner > | > | Scanner on F9 Beta > | ------------------------ > | [root@F9Beta ~]# sane-find-scanner > | > | # sane-find-scanner will now attempt to detect your scanner. If the > | # result is different from what you expected, first make sure your > | # scanner is powered up and properly connected to your computer. > | > | # No SCSI scanners found. If you expected something different, make > sure that > | # you have loaded a kernel SCSI driver for your SCSI adapter. > | > | found USB scanner (vendor=0x04b8 [EPSON], product=0x0119 [EPSON > | Scanner]) at libusb:001:003 > | > | [root@F9Beta ~]# ls -l /proc/bus/usb/001 > | total 0 > | -rw-r--r-- 1 root root 43 2008-03-27 04:37 001 > | -rw-r--r-- 1 root root 50 2008-03-27 04:37 003 > | -rw-r--r-- 1 root root 50 2008-03-27 04:37 004 > | > | [root@F9Beta ~]# scanimage -L > | device `epkowa:libusb:001:003' is a Epson Perfection 4490 flatbed scanner > | > | Any suggestions will be much appreciated. > | > | Thanks. > | > | Gerry > | > > > Gerry, > > I just got this bug fixed with Nils > > https://bugzilla.redhat.com/show_bug.cgi?id=438827 > > The latest sane-backend rpms from koji fix this problem. > > Kevin Thanks for the reply Kevin. I see that I could fudge and probably get it to work with the /etc/udev/rules.d/60-libsane.rules from F8, but would rather use the real fix. I have no idea how to get the rpm from koji. I looked at the koji site and fedora wiki page and am still clueless. What do I need to do to obtain the package? Thanks. Gerry -- fedora-test-list mailing list fedora-test-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-test-list
