Prashant wrote:
scsi 1:0:0:0: Direct-Access ATA *ST380020ACE * 4.91 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16).
sd 1:0:0:0: [sdb] 0 512-byte hardware sectors (0 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
*sd 1:0:0:0: [sdb] Attached SCSI disk*
scsi 1:0:1:0: CD-ROM *SONY DVD RW DRU-810A* 1.0a PQ: 0 ANSI: 5
snip
As u can see fedora 8 reads the IDE drives as sd*, while knoppix reads its
correctly according to the convention as hd*. What can be the problem? I
want fedora 8 to be reading my secondary hardisk.
/dev/hdX versus /dev/sdX is not a matter of correct versus incorrect, its an
intentional change started in F8 for all hard drive devices to be treated as
scsi whether ide or not. The knoppix kernel is not doing this and so still
identifies it as hdX. I don't know the cause of your problem but its not that
detail.
The portion snipped out above looks like the real issue here, with zero hardware
sectors found. This should probably go directly into bugzilla against the kernel.
Make sure to get the kenrel and udev versions you have in the report (don't know
that from your email).
--
Andrew Farris <lordmorgul@xxxxxxxxx> <ajfarris@xxxxxxxxx>
gpg 0xC99B1DF3 fingerprint CDEC 6FAD BA27 40DF 707E A2E0 F0F6 E622 C99B 1DF3
No one now has, and no one will ever again get, the big picture. - Daniel Geer
---- ----
--
fedora-test-list mailing list
fedora-test-list@xxxxxxxxxx
To unsubscribe:
https://www.redhat.com/mailman/listinfo/fedora-test-list
