Hi,
I installed F8T1 and I noticed that an old problem that I have with
fedora releases since FC6 is still there. I have filled a bug in
bugzilla long time ago, but wasn't acted upon (probably I haven't filled
to the right module).
The situation is like this:
I have 2 "soundcards". One real soundcard that goes to the speakers
(NVidia something), and 1 USB headset (Logitech). In the Volume control
application there are always more ((USB Mixer (OSS), and USB Mixer
(ALSA)) for some wierd reason, but ... doesnt matter. The headset and
the soundcard work fine...when they work....
Problem:
If I set the Logitech USB headset as the default soundcard in gnome's
Volume Control application, after a reboot, the NVidia soundcard
disappears from the list of available devices. and I can't use it
basically. While in that session (without the soundcard), if I do a
modprobe snd-intel8x0 and reboot, upon reboot the card appears in the
list and I can use it fine. I haven't tried yet with just restarting X
to see if it appears in the list.
I would like to fill a bug in Bugzilla, but I don't know exactly what
component causes this behaviour. Does anyone have any idea? Can anyone help?
Thank you very much.
P.S. I have attached some files that I think are helpful. If you need
more information, I'll be glad to provide it.
Linux version 2.6.23-0.73.rc2.fc8 (kojibuilder@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.2 20070723 (Red Hat 4.1.2-17)) #1 SMP Mon Aug 6 20:26:04 EDT 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e400 (usable)
BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f58d0
Using x86 segment limits to approximate NX protection
Entering add_active_range(0, 0, 262128) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 262128
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 262128
On node 0 totalpages: 262128
DMA zone: 56 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4040 pages, LIFO batch:0
Normal zone: 3080 pages used for memmap
Normal zone: 222200 pages, LIFO batch:31
HighMem zone: 447 pages used for memmap
HighMem zone: 32305 pages, LIFO batch:7
Movable zone: 0 pages used for memmap
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP 000F7C80, 0014 (r0 Nvidia)
ACPI: RSDT 3FFF3040, 0034 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
ACPI: FACP 3FFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
ACPI: DSDT 3FFF3180, 6677 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E)
ACPI: FACS 3FFF0000, 0040
ACPI: SRAT 3FFF9900, 0090 (r1 AMD HAMMER 1 AMD 1)
ACPI: MCFG 3FFF9A00, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
ACPI: APIC 3FFF9840, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:7 APIC version 16
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
swsusp: Registered nosave memory region: 000000000009e000 - 000000000009f000
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
Built 1 zonelists in Zone order. Total pages: 258545
Kernel command line: ro root=LABEL=/ rhgb quiet
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0816000 soft=c07f6000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2613.448 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8
... MAX_LOCK_DEPTH: 30
... MAX_LOCKDEP_KEYS: 2048
... CLASSHASH_SIZE: 1024
... MAX_LOCKDEP_ENTRIES: 8192
... MAX_LOCKDEP_CHAINS: 16384
... CHAINHASH_SIZE: 8192
memory used by lock dependency info: 1024 kB
per task-struct memory footprint: 1680 bytes
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1022384k/1048512k available (2239k kernel code, 25408k reserved, 1215k data, 568k init, 131008k highmem)
virtual kernel memory layout:
fixmap : 0xffc53000 - 0xfffff000 (3760 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc0765000 - 0xc07f3000 ( 568 kB)
.data : 0xc062fd3d - 0xc075fa44 (1215 kB)
.text : 0xc0400000 - 0xc062fd3d (2239 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Calibrating delay using timer specific routine.. 5229.49 BogoMIPS (lpj=2614746)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU: After all inits, caps: 078bf3ff e1d3fbff 00000000 00000410 00000000 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
ACPI: Core revision 20070126
CPU0: AMD Athlon(tm) 64 FX-55 Processor stepping 0a
Total of 1 processors activated (5229.49 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
Brought up 1 CPUs
sizeof(vma)=84 bytes
sizeof(page)=56 bytes
sizeof(inode)=604 bytes
sizeof(dentry)=160 bytes
sizeof(ext3inode)=856 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=180 bytes
sizeof(task_struct)=3376 bytes
khelper used greatest stack depth: 3160 bytes left
Booting paravirtualized kernel on bare hardware
khelper used greatest stack depth: 3084 bytes left
Time: 23:26:39 Date: 07/09/107
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
PCI: No mmconfig possible on device 00:18
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:09.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
ACPI: RTC can wake from S4
Time: tsc clocksource has been installed.
pnp: 00:01: ioport range 0x4000-0x407f has been reserved
pnp: 00:01: ioport range 0x4080-0x40ff has been reserved
pnp: 00:01: ioport range 0x4400-0x447f has been reserved
pnp: 00:01: ioport range 0x4480-0x44ff has been reserved
pnp: 00:01: ioport range 0x4800-0x487f has been reserved
pnp: 00:01: ioport range 0x4880-0x48ff has been reserved
pnp: 00:01: iomem range 0x0-0x0 could not be reserved
pnp: 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved
pnp: 00:0d: iomem range 0xd9000-0xdbfff has been reserved
pnp: 00:0d: iomem range 0xf0000-0xf7fff could not be reserved
pnp: 00:0d: iomem range 0xf8000-0xfbfff could not be reserved
pnp: 00:0d: iomem range 0xfc000-0xfffff could not be reserved
PCI: Bridge: 0000:00:09.0
IO window: 8000-9fff
MEM window: d3000000-d4ffffff
PREFETCH window: 50000000-500fffff
PCI: Bridge: 0000:00:0b.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0d.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0e.0
IO window: a000-afff
MEM window: d0000000-d2ffffff
PREFETCH window: c0000000-cfffffff
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 65536 (order: 9, 2621440 bytes)
TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 2955k freed
khelper used greatest stack depth: 2872 bytes left
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1186701999.674:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
khelper used greatest stack depth: 2864 bytes left
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key 843EEBF3F06B1BE
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Found disabled HT MSI Mapping on 0000:00:0b.0
PCI: Found enabled HT MSI Mapping on 0000:00:00.0
PCI: Linking AER extended capability on 0000:00:0b.0
PCI: Found disabled HT MSI Mapping on 0000:00:0c.0
PCI: Found enabled HT MSI Mapping on 0000:00:00.0
PCI: Linking AER extended capability on 0000:00:0c.0
PCI: Found disabled HT MSI Mapping on 0000:00:0d.0
PCI: Found enabled HT MSI Mapping on 0000:00:00.0
PCI: Linking AER extended capability on 0000:00:0d.0
PCI: Found disabled HT MSI Mapping on 0000:00:0e.0
PCI: Found enabled HT MSI Mapping on 0000:00:00.0
PCI: Linking AER extended capability on 0000:00:0e.0
Boot video device is 0000:01:00.0
PCI: Setting latency timer of device 0000:00:0b.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0b.0:pcie00]
Allocate Port Service[0000:00:0b.0:pcie03]
PCI: Setting latency timer of device 0000:00:0c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
Allocate Port Service[0000:00:0c.0:pcie03]
PCI: Setting latency timer of device 0000:00:0d.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0d.0:pcie00]
Allocate Port Service[0000:00:0d.0:pcie03]
PCI: Setting latency timer of device 0000:00:0e.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0e.0:pcie00]
Allocate Port Service[0000:00:0e.0:pcie03]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Fan [FAN] (on)
ACPI Exception (processor_core-0790): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI: Thermal Zone [THRM] (40 C)
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
khelper used greatest stack depth: 2796 bytes left
Generic RTC Driver v1.07
Non-volatile memory driver v1.2
Linux agpgart interface v0.102
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Found 1 AMD Athlon(tm) 64 FX-55 Processor processors (1 cpu cores) (version 2.00.00)
powernow-k8: BIOS error - no PSB or ACPI _PSS objects
Using IPI No-Shortcut mode
Magic number: 3:503:453
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Freeing unused kernel memory: 568k freed
Write protecting the kernel read-only data: 916k
USB Universal Host Controller Interface driver v3.0
insmod used greatest stack depth: 2312 bytes left
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:02.0: irq 16, io mem 0xd5004000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
insmod used greatest stack depth: 1912 bytes left
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 17, io mem 0xfeb00000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
insmod used greatest stack depth: 1892 bytes left
SCSI subsystem initialized
libata version 2.21 loaded.
sata_sil 0000:05:0a.0: version 2.2
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
ACPI: PCI Interrupt 0000:05:0a.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 18
sata_sil 0000:05:0a.0: Applying R_ERR on DMA activate FIS errata fix
scsi0 : sata_sil
scsi1 : sata_sil
scsi2 : sata_sil
scsi3 : sata_sil
ata1: SATA max UDMA/100 cmd 0xf8824080 ctl 0xf882408a bmdma 0xf8824000 irq 18
ata2: SATA max UDMA/100 cmd 0xf88240c0 ctl 0xf88240ca bmdma 0xf8824008 irq 18
ata3: SATA max UDMA/100 cmd 0xf8824280 ctl 0xf882428a bmdma 0xf8824200 irq 18
ata4: SATA max UDMA/100 cmd 0xf88242c0 ctl 0xf88242ca bmdma 0xf8824208 irq 18
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: ATA-7: WDC WD360ADFD-00NLR1, 20.07P20, max UDMA/133
ata1.00: 72303840 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/100
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata2.00: ATA-7: WDC WD360ADFD-00NLR1, 20.07P20, max UDMA/133
ata2.00: 72303840 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/100
usb 2-4: new high speed USB device using ehci_hcd and address 5
usb 2-4: configuration #1 chosen from 1 choice
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
ata3: SATA link down (SStatus 0 SControl 310)
ata4: SATA link down (SStatus 0 SControl 310)
scsi 0:0:0:0: Direct-Access ATA WDC WD360ADFD-00 20.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 72303840 512-byte hardware sectors (37020 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 72303840 512-byte hardware sectors (37020 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < >
sda: p1 exceeds device capacity
sda: p2 exceeds device capacity
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: Direct-Access ATA WDC WD360ADFD-00 20.0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 72303840 512-byte hardware sectors (37020 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 72303840 512-byte hardware sectors (37020 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: unknown partition table
sd 1:0:0:0: [sdb] Attached SCSI disk
insmod used greatest stack depth: 940 bytes left
usb 1-1: new full speed USB device using ohci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
input: Logitech USB Gaming Mouse as /class/input/input1
input: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:02.0-1
hiddev96: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:02.0-1
usb 1-2: new full speed USB device using ohci_hcd and address 3
usb 1-2: configuration #1 chosen from 1 choice
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
usb 1-3: new full speed USB device using ohci_hcd and address 4
usb 1-3: configuration #1 chosen from 1 choice
input: Logitech Logitech USB Headset as /class/input/input2
input: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:00:02.0-3
usb 2-4.3: new high speed USB device using ehci_hcd and address 6
usb 2-4.3: configuration #1 chosen from 1 choice
usb 2-4.4: new full speed USB device using ehci_hcd and address 7
usb 2-4.4: configuration #1 chosen from 1 choice
usb 1-2.1: new low speed USB device using ohci_hcd and address 5
usb 1-2.1: configuration #1 chosen from 1 choice
input: Logitech Logitech Gaming Keyboard as /class/input/input3
input: USB HID v1.10 Keyboard [Logitech Logitech Gaming Keyboard] on usb-0000:00:02.0-2.1
input: Logitech Logitech Gaming Keyboard as /class/input/input4
input,hiddev97: USB HID v1.10 Device [Logitech Logitech Gaming Keyboard] on usb-0000:00:02.0-2.1
usb 1-2.4: new full speed USB device using ohci_hcd and address 6
usb 1-2.4: configuration #1 chosen from 1 choice
input: G15 Keyboard G15 Keyboard as /class/input/input5
input,hiddev98: USB HID v1.11 Keypad [G15 Keyboard G15 Keyboard] on usb-0000:00:02.0-2.4
sata_nv 0000:00:07.0: version 3.4
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 19
sata_nv 0000:00:07.0: Using ADMA mode
PCI: Setting latency timer of device 0000:00:07.0 to 64
scsi4 : sata_nv
scsi5 : sata_nv
ata5: SATA max UDMA/133 cmd 0xf8826480 ctl 0xf88264a0 bmdma 0x0001d800 irq 19
ata6: SATA max UDMA/133 cmd 0xf8826580 ctl 0xf88265a0 bmdma 0x0001d808 irq 19
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: ATA-7: ST3250824AS, 3.AAE, max UDMA/133
ata6.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA ST3250824AS 3.AA PQ: 0 ANSI: 5
ata6: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
sd 5:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
sd 5:0:0:0: [sdc] Write Protect is off
sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
sd 5:0:0:0: [sdc] Write Protect is off
sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc2 sdc3 < sdc5 >
sd 5:0:0:0: [sdc] Attached SCSI disk
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 20
sata_nv 0000:00:08.0: Using ADMA mode
PCI: Setting latency timer of device 0000:00:08.0 to 64
scsi6 : sata_nv
scsi7 : sata_nv
ata7: SATA max UDMA/133 cmd 0xf8842480 ctl 0xf88424a0 bmdma 0x0001c400 irq 20
ata8: SATA max UDMA/133 cmd 0xf8842580 ctl 0xf88425a0 bmdma 0x0001c408 irq 20
ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata7.00: ATA-7: ST3300622AS, 3.AAH, max UDMA/133
ata7.00: 586072368 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata7.00: configured for UDMA/133
ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata8.00: ATA-7: ST3250823AS, 3.03, max UDMA/133
ata8.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata8.00: configured for UDMA/133
scsi 6:0:0:0: Direct-Access ATA ST3300622AS 3.AA PQ: 0 ANSI: 5
ata7: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
sd 6:0:0:0: [sdd] 586072368 512-byte hardware sectors (300069 MB)
sd 6:0:0:0: [sdd] Write Protect is off
sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 6:0:0:0: [sdd] 586072368 512-byte hardware sectors (300069 MB)
sd 6:0:0:0: [sdd] Write Protect is off
sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1
sd 6:0:0:0: [sdd] Attached SCSI disk
scsi 7:0:0:0: Direct-Access ATA ST3250823AS 3.03 PQ: 0 ANSI: 5
ata8: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
sd 7:0:0:0: [sde] 488397168 512-byte hardware sectors (250059 MB)
sd 7:0:0:0: [sde] Write Protect is off
sd 7:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 7:0:0:0: [sde] 488397168 512-byte hardware sectors (250059 MB)
sd 7:0:0:0: [sde] Write Protect is off
sd 7:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sde: sde1 sde2
sd 7:0:0:0: [sde] Attached SCSI disk
pata_amd 0000:00:06.0: version 0.3.8
PCI: Setting latency timer of device 0000:00:06.0 to 64
scsi8 : pata_amd
scsi9 : pata_amd
ata9: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14
ata10: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15
ata9.00: ATAPI: _NEC DVD_RW ND-3550A, 1.05, max UDMA/33
ata9.00: configured for UDMA/33
scsi 8:0:0:0: CD-ROM _NEC DVD_RW ND-3550A 1.05 PQ: 0 ANSI: 5
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@xxxxxxxxxx
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit(1186702014.306:2): selinux=0 auid=4294967295
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 5:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: Attached scsi generic sg3 type 0
sd 7:0:0:0: Attached scsi generic sg4 type 0
scsi 8:0:0:0: Attached scsi generic sg5 type 5
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 8:0:0:0: Attached scsi CD-ROM sr0
input: Power Button (FF) as /class/input/input6
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input7
ACPI: Power Button (CM) [PWRB]
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:0a.0 to 64
forcedeth: using HIGHDMA
eth0: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:0a.0
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
ACPI: PCI Interrupt 0000:05:0b.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 21
firewire_ohci: Added fw-ohci device 0000:05:0b.0, OHCI version 1.10
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k
usbcore: registered new interface driver snd-usb-audio
usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17
usbcore: registered new interface driver usblp
firewire_core: created new fw device fw0 (0 config rom retries, S400)
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
cannot find the slot for index 0 (range 0-1), error: -16
Intel ICH: probe of 0000:00:04.0 failed with error -12
gameport: NS558 PnP Gameport is pnp00:0b/gameport0, io 0x201, speed 59659kHz
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:01:00.0 to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.11 Wed Jun 13 18:21:22 PDT 2007
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
No dock devices found.
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on dm-3, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sde1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2128572k swap on /dev/mapper/sil_ahagdiddaiajp6. Priority:-1 extents:1 across:2128572k
audit(1186716432.323:3): audit_pid=2189 old=0 by auid=4294967295
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
ppdev: user-space parallel port driver
ppdev0: registered pardevice
ppdev0: unregistered pardevice
ppdev0: registered pardevice
ppdev0: unregistered pardevice
eth0: no IPv6 routers present
lp0: using parport0 (interrupt-driven).
lp0: console ready
eog[4885]: segfault at 00000000 eip 006b3683 esp b7cfcfcc error 4
eog[4891]: segfault at 00000000 eip 006b3683 esp b7db9fcc error 4
eog[6062]: segfault at 00000000 eip 006b3683 esp b7d5efcc error 4
00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
Subsystem: ASUSTeK Computer Inc. A8N-E Mainboard
Flags: bus master, 66MHz, fast devsel, latency 0
Capabilities: <access denied>
00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3)
Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard
Flags: bus master, 66MHz, fast devsel, latency 0
00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard
Flags: 66MHz, fast devsel, IRQ 12
I/O ports at e400 [size=32]
I/O ports at 4c00 [size=64]
I/O ports at 4c40 [size=64]
Capabilities: <access denied>
00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 16
Memory at d5004000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 17
Memory at feb00000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio Controller (rev a2)
Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 12
I/O ports at dc00 [size=256]
I/O ports at e000 [size=256]
Memory at d5003000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2) (prog-if 8a [Master SecP PriP])
Subsystem: Unknown device f043:815a
Flags: bus master, 66MHz, fast devsel, latency 0
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
I/O ports at f000 [size=16]
Capabilities: <access denied>
00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. A8N-E Mainboard
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 19
I/O ports at 09f0 [size=8]
I/O ports at 0bf0 [size=4]
I/O ports at 0970 [size=8]
I/O ports at 0b70 [size=4]
I/O ports at d800 [size=16]
Memory at d5002000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
I/O ports at 09e0 [size=8]
I/O ports at 0be0 [size=4]
I/O ports at 0960 [size=8]
I/O ports at 0b60 [size=4]
I/O ports at c400 [size=16]
Memory at d5001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode])
Flags: bus master, 66MHz, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=128
I/O behind bridge: 00008000-00009fff
Memory behind bridge: d3000000-d4ffffff
Prefetchable memory behind bridge: 50000000-500fffff
00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3)
Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 16
Memory at d5000000 (32-bit, non-prefetchable) [size=4K]
I/O ports at b000 [size=8]
Capabilities: <access denied>
00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Capabilities: <access denied>
00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Capabilities: <access denied>
00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Capabilities: <access denied>
00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: d0000000-d2ffffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Capabilities: <access denied>
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Flags: fast devsel
Capabilities: <access denied>
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
Flags: fast devsel
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
Flags: fast devsel
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Flags: fast devsel
01:00.0 VGA compatible controller: nVidia Corporation G70 [GeForce 7600 GT] (rev a1) (prog-if 00 [VGA])
Subsystem: Unknown device 19f1:201f
Flags: bus master, fast devsel, latency 0, IRQ 22
Memory at d0000000 (32-bit, non-prefetchable) [size=16M]
Memory at c0000000 (64-bit, prefetchable) [size=256M]
Memory at d1000000 (64-bit, non-prefetchable) [size=16M]
I/O ports at a000 [size=128]
[virtual] Expansion ROM at d2000000 [disabled] [size=128K]
Capabilities: <access denied>
05:06.0 Network controller: Atheros Communications, Inc. AR5416 802.11a/b/g/n Wireless PCI Adapter (rev 01)
Subsystem: D-Link System Inc Unknown device 3a6d
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 3
Memory at d4000000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
05:0a.0 RAID bus controller: Silicon Image, Inc. SiI 3114 [SATALink/SATARaid] Serial ATA Controller (rev 02)
Subsystem: ASUSTeK Computer Inc. Unknown device 8167
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18
I/O ports at 8000 [size=8]
I/O ports at 8400 [size=4]
I/O ports at 8800 [size=8]
I/O ports at 8c00 [size=4]
I/O ports at 9000 [size=16]
Memory at d4015000 (32-bit, non-prefetchable) [size=1K]
Expansion ROM at 50000000 [disabled] [size=512K]
Capabilities: <access denied>
05:0b.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard
Flags: bus master, medium devsel, latency 32, IRQ 21
Memory at d4014000 (32-bit, non-prefetchable) [size=2K]
Memory at d4010000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
#
# ALSA library configuration file
#
# pre-load the configuration files
@hooks [
{
func load
files [
"/etc/asound.conf"
"~/.asoundrc"
]
errors false
}
]
# load card-specific configuration files (on request)
cards.@hooks [
{
func load
files [
{
@func concat
strings [
{ @func datadir }
"/cards/aliases.conf"
]
}
]
}
{
func load_for_all_cards
files [
{
@func concat
strings [
{ @func datadir }
"/cards/"
{ @func private_string }
".conf"
]
}
]
errors false
}
]
#
# defaults
#
# show all name hints also for definitions without hint {} section
defaults.namehint.showall off
# show just basic name hints
defaults.namehint.basic on
# show extended name hints
defaults.namehint.extended off
#
defaults.ctl.card 0
defaults.pcm.card 0
defaults.pcm.device 0
defaults.pcm.subdevice -1
defaults.pcm.nonblock 1
defaults.pcm.ipc_key 5678293
defaults.pcm.ipc_perm 0600
defaults.pcm.dmix.max_periods 0
defaults.pcm.dmix.rate 48000
defaults.pcm.dmix.format S16_LE
defaults.pcm.dmix.card defaults.pcm.card
defaults.pcm.dmix.device defaults.pcm.device
defaults.pcm.dsnoop.card defaults.pcm.card
defaults.pcm.dsnoop.device defaults.pcm.device
defaults.pcm.front.card defaults.pcm.card
defaults.pcm.front.device defaults.pcm.device
defaults.pcm.rear.card defaults.pcm.card
defaults.pcm.rear.device defaults.pcm.device
defaults.pcm.center_lfe.card defaults.pcm.card
defaults.pcm.center_lfe.device defaults.pcm.device
defaults.pcm.side.card defaults.pcm.card
defaults.pcm.side.device defaults.pcm.device
defaults.pcm.surround40.card defaults.pcm.card
defaults.pcm.surround40.device defaults.pcm.device
defaults.pcm.surround41.card defaults.pcm.card
defaults.pcm.surround41.device defaults.pcm.device
defaults.pcm.surround50.card defaults.pcm.card
defaults.pcm.surround50.device defaults.pcm.device
defaults.pcm.surround51.card defaults.pcm.card
defaults.pcm.surround51.device defaults.pcm.device
defaults.pcm.surround71.card defaults.pcm.card
defaults.pcm.surround71.device defaults.pcm.device
defaults.pcm.iec958.card defaults.pcm.card
defaults.pcm.iec958.device defaults.pcm.device
defaults.pcm.modem.card defaults.pcm.card
defaults.pcm.modem.device defaults.pcm.device
defaults.rawmidi.card 0
defaults.rawmidi.device 0
defaults.rawmidi.subdevice -1
defaults.hwdep.card 0
defaults.hwdep.device 0
defaults.timer.class 2
defaults.timer.sclass 0
defaults.timer.card 0
defaults.timer.device 0
defaults.timer.subdevice 0
#
# PCM interface
#
# redirect to load-on-demand extended pcm definitions
pcm.cards cards.pcm
pcm.default cards.pcm.default
pcm.front cards.pcm.front
pcm.rear cards.pcm.rear
pcm.center_lfe cards.pcm.center_lfe
pcm.side cards.pcm.side
pcm.surround40 cards.pcm.surround40
pcm.surround41 cards.pcm.surround41
pcm.surround50 cards.pcm.surround50
pcm.surround51 cards.pcm.surround51
pcm.surround71 cards.pcm.surround71
pcm.iec958 cards.pcm.iec958
pcm.spdif iec958
pcm.dmix cards.pcm.dmix
pcm.dsnoop cards.pcm.dsnoop
pcm.modem cards.pcm.modem
pcm.phoneline cards.pcm.phoneline
pcm.hw {
@args [ CARD DEV SUBDEV ]
@args.CARD {
type string
default {
@func getenv
vars [
ALSA_PCM_CARD
ALSA_CARD
]
default {
@func refer
name defaults.pcm.card
}
}
}
@args.DEV {
type integer
default {
@func igetenv
vars [
ALSA_PCM_DEVICE
]
default {
@func refer
name defaults.pcm.device
}
}
}
@args.SUBDEV {
type integer
default {
@func refer
name defaults.pcm.subdevice
}
}
type hw
card $CARD
device $DEV
subdevice $SUBDEV
hint {
show {
@func refer
name defaults.namehint.extended
}
description "Direct hardware device without any conversions"
}
}
pcm.plughw {
@args [ CARD DEV SUBDEV ]
@args.CARD {
type string
default {
@func getenv
vars [
ALSA_PCM_CARD
ALSA_CARD
]
default {
@func refer
name defaults.pcm.card
}
}
}
@args.DEV {
type integer
default {
@func igetenv
vars [
ALSA_PCM_DEVICE
]
default {
@func refer
name defaults.pcm.device
}
}
}
@args.SUBDEV {
type integer
default {
@func refer
name defaults.pcm.subdevice
}
}
type plug
slave.pcm {
type hw
card $CARD
device $DEV
subdevice $SUBDEV
}
hint {
show {
@func refer
name defaults.namehint.extended
}
description "Hardware device with all software conversions"
}
}
pcm.plug {
@args [ SLAVE ]
@args.SLAVE {
type string
}
type plug
slave.pcm $SLAVE
}
pcm.shm {
@args [ SOCKET PCM ]
@args.SOCKET {
type string
}
@args.PCM {
type string
}
type shm
server $SOCKET
pcm $PCM
}
pcm.tee {
@args [ SLAVE FILE FORMAT ]
@args.SLAVE {
type string
}
@args.FILE {
type string
}
@args.FORMAT {
type string
default raw
}
type file
slave.pcm $SLAVE
file $FILE
format $FORMAT
}
pcm.file {
@args [ FILE FORMAT ]
@args.FILE {
type string
}
@args.FORMAT {
type string
default raw
}
type file
slave.pcm null
file $FILE
format $FORMAT
}
pcm.null {
type null
hint {
show {
@func refer
name defaults.namehint.basic
}
description "Discard all samples (playback) or generate zero samples (capture)"
}
}
#
# Control interface
#
ctl.default {
type hw
card {
@func getenv
vars [
ALSA_CTL_CARD
ALSA_CARD
]
default {
@func refer
name defaults.ctl.card
}
}
}
ctl.hw {
@args[ CARD ]
@args.CARD {
type string
default {
@func getenv
vars [
ALSA_CTL_CARD
ALSA_CARD
]
default {
@func refer
name defaults.ctl.card
}
}
}
type hw
card $CARD
}
ctl.shm {
@args [ SOCKET CTL ]
@args.SOCKET {
type string
}
@args.CTL {
type string
}
type shm
server $SOCKET
ctl $CTL
}
#
# RawMidi interface
#
rawmidi.default {
type hw
card {
@func getenv
vars [
ALSA_RAWMIDI_CARD
ALSA_CARD
]
default {
@func refer
name defaults.rawmidi.card
}
}
device {
@func igetenv
vars [
ALSA_RAWMIDI_DEVICE
]
default {
@func refer
name defaults.rawmidi.device
}
}
}
rawmidi.hw {
@args [ CARD DEV SUBDEV ]
@args.CARD {
type string
default {
@func getenv
vars [
ALSA_RAWMIDI_CARD
ALSA_CARD
]
default {
@func refer
name defaults.rawmidi.card
}
}
}
@args.DEV {
type integer
default {
@func igetenv
vars [
ALSA_RAWMIDI_DEVICE
]
default {
@func refer
name defaults.rawmidi.device
}
}
}
@args.SUBDEV {
type integer
default -1
}
type hw
card $CARD
device $DEV
subdevice $SUBDEV
hint {
description "Direct rawmidi driver device"
device $DEV
}
}
rawmidi.virtual {
@args [ MERGE ]
@args.MERGE {
type string
default 1
}
type virtual
merge $MERGE
}
#
# Sequencer interface
#
seq.default {
type hw
}
seq.hw {
type hw
}
#
# HwDep interface
#
hwdep.default {
type hw
card {
@func getenv
vars [
ALSA_HWDEP_CARD
ALSA_CARD
]
default {
@func refer
name defaults.hwdep.card
}
}
device {
@func igetenv
vars [
ALSA_HWDEP_DEVICE
]
default {
@func refer
name defaults.hwdep.device
}
}
}
hwdep.hw {
@args [ CARD DEV ]
@args.CARD {
type string
default {
@func getenv
vars [
ALSA_HWDEP_CARD
ALSA_CARD
]
default {
@func refer
name defaults.hwdep.card
}
}
}
@args.DEV {
type integer
default {
@func igetenv
vars [
ALSA_HWDEP_DEVICE
]
default {
@func refer
name defaults.hwdep.device
}
}
}
type hw
card $CARD
device $DEV
}
#
# Timer interface
#
timer_query.default {
type hw
}
timer_query.hw {
type hw
}
timer.default {
type hw
class {
@func refer
name defaults.timer.class
}
sclass {
@func refer
name defaults.timer.sclass
}
card {
@func refer
name defaults.timer.card
}
device {
@func refer
name defaults.timer.device
}
subdevice {
@func refer
name defaults.timer.subdevice
}
hint.description "Default direct hardware timer device"
}
timer.hw {
@args [ CLASS SCLASS CARD DEV SUBDEV ]
@args.CLASS {
type integer
default {
@func refer
name defaults.timer.class
}
}
@args.SCLASS {
type integer
default {
@func refer
name defaults.timer.sclass
}
}
@args.CARD {
type string
default {
@func refer
name defaults.timer.card
}
}
@args.DEV {
type integer
default {
@func refer
name defaults.timer.device
}
}
@args.SUBDEV {
type integer
default {
@func refer
name defaults.timer.subdevice
}
}
type hw
class $CLASS
sclass $SCLASS
card $CARD
device $DEV
subdevice $SUBDEV
}
state.Headset {
control.1 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Mic Playback Switch'
value false
}
control.2 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 464'
iface MIXER
name 'Mic Playback Volume'
value 0
}
control.3 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Speaker Playback Switch'
value true
}
control.4 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 44'
iface MIXER
name 'Speaker Playback Volume'
value.0 7
value.1 7
}
control.5 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Mic Capture Switch'
value false
}
control.6 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 13'
iface MIXER
name 'Mic Capture Volume'
value 0
}
}
state.UART {
control {
}
}
state.CK804 {
control.1 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Master Playback Switch'
value true
}
control.2 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
iface MIXER
name 'Master Playback Volume'
value.0 23
value.1 23
}
control.3 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Center Playback Switch'
value false
}
control.4 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 31'
iface MIXER
name 'Center Playback Volume'
value 31
}
control.5 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'LFE Playback Switch'
value false
}
control.6 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 31'
iface MIXER
name 'LFE Playback Volume'
value 0
}
control.7 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Surround Playback Switch'
value.0 false
value.1 false
}
control.8 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
iface MIXER
name 'Surround Playback Volume'
value.0 0
value.1 0
}
control.9 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Master Mono Playback Switch'
value true
}
control.10 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 31'
iface MIXER
name 'Master Mono Playback Volume'
value 23
}
control.11 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'PC Speaker Playback Switch'
value false
}
control.12 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 15'
iface MIXER
name 'PC Speaker Playback Volume'
value 0
}
control.13 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Phone Playback Switch'
value false
}
control.14 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 31'
iface MIXER
name 'Phone Playback Volume'
value 0
}
control.15 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Mic Playback Switch'
value false
}
control.16 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 31'
iface MIXER
name 'Mic Playback Volume'
value 0
}
control.17 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Mic Boost (+20dB)'
value false
}
control.18 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Line Playback Switch'
value false
}
control.19 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
iface MIXER
name 'Line Playback Volume'
value.0 0
value.1 0
}
control.20 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'CD Playback Switch'
value true
}
control.21 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
iface MIXER
name 'CD Playback Volume'
value.0 23
value.1 23
}
control.22 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Aux Playback Switch'
value false
}
control.23 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
iface MIXER
name 'Aux Playback Volume'
value.0 0
value.1 0
}
control.24 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'PCM Playback Switch'
value true
}
control.25 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
iface MIXER
name 'PCM Playback Volume'
value.0 23
value.1 23
}
control.26 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 2
comment.item.0 Mic
comment.item.1 CD
comment.item.2 Video
comment.item.3 Aux
comment.item.4 Line
comment.item.5 Mix
comment.item.6 'Mix Mono'
comment.item.7 Phone
iface MIXER
name 'Capture Source'
value.0 CD
value.1 CD
}
control.27 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Capture Switch'
value true
}
control.28 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 15'
iface MIXER
name 'Capture Volume'
value.0 0
value.1 0
}
control.29 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Mix
comment.item.1 Mic
iface MIXER
name 'Mono Output Select'
value Mix
}
control.30 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Mic1
comment.item.1 Mic2
iface MIXER
name 'Mic Select'
value Mic1
}
control.31 {
comment.access read
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
}
control.32 {
comment.access read
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Pro Mask'
value cf00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
}
control.33 {
comment.access 'read write'
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Default'
value '0082000200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
}
control.34 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 Playback Switch'
value false
}
control.35 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 3'
iface MIXER
name 'IEC958 Playback AC97-SPSA'
value 3
}
control.36 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Duplicate Front'
value false
}
control.37 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Mic Front Input Switch'
value false
}
control.38 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Shared
comment.item.1 Independent
iface MIXER
name 'Surround Jack Mode'
value Shared
}
control.39 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 '2ch'
comment.item.1 '4ch'
comment.item.2 '6ch'
iface MIXER
name 'Channel Mode'
value '2ch'
}
control.40 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 Capture Switch'
value false
}
control.41 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 PCM
comment.item.1 'Analog In'
comment.item.2 'IEC958 In'
iface MIXER
name 'IEC958 Playback Source'
value PCM
}
control.42 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'External Amplifier'
value true
}
}
state.U0x46d0x8ad {
control.1 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Mic Capture Switch'
value false
}
control.2 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 3'
iface MIXER
name 'Mic Capture Volume'
value 0
}
control.3 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Auto Gain Control'
value false
}
}
--
fedora-test-list mailing list
fedora-test-list@xxxxxxxxxx
To unsubscribe:
https://www.redhat.com/mailman/listinfo/fedora-test-list
