Section "Monitor"
Identifier "1706FP"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 76.0
EndSection
Section "Device"
Identifier "Videocard0"
Driver "intel"
# Driver "i810"
Option "AperTexSize" "65536"
Option "PageFlip" "true"
Option "TripleBuffer" "true"
# Option "AccelMethod" "EXA"
EndSection
Section "Screen"
# Monitor "1706FP"
Identifier "Screen0"
Device "Videocard0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
I get 1280x1024 mode but the top and bottom panel seem to understand they are in as 1024x768 one...:
both are shorter than the whole horizontal lenght of the screen and the bottom one is not at bottom of the screen but 1/5 above of it
The applications behave correctly in the sense that they use the whole screen whne maximized / moved...
In log file I have
(II) intel(0): EDID for output TMDS-1
(II) intel(0): Manufacturer: DEL Model: 3018 Serial#: 1094932814
(II) intel(0): Year: 2005 Week: 38
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max H-Image Size [cm]: horiz.: 34 vert.: 27
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): Default color space is primary color space
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
...
(II) intel(0): Serial No: GC57159DACYN
(II) intel(0): Monitor name: DELL 1706FPV
(II) intel(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 81 kHz, PixClo
ck max 140 MHz
using the i810 driver option in device section I don't get this problem but tipically I have to Ctrl+Alt+BackSpace 4-5 times before getting the gdm login screen.
otherwise I only hear a beep and get a black screen...
Sometimes I need to go with init 3 / init 5 ....
Any news on this side? Any way to contribute debugging? Is this problem the same for i386 or is it an x86_64 specific one?
Any bug numbers already opened to fill with further information?
The system is a Dell SX280 desktop where lspci -v gives:
00:02.0 VGA compatible controller: Intel Corporation 82915G/GV/910GL Integrated Grap
hics Controller (rev 04) (prog-if 00 [VGA])
Subsystem: Dell Unknown device 0179
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at dff00000 (32-bit, non-prefetchable) [size=512K]
I/O ports at e898 [size=8]
Memory at c0000000 (32-bit, prefetchable) [size=256M]
Memory at dfec0000 (32-bit, non-prefetchable) [size=256K]
Capabilities: [d0] Power Management version 2
00:02.1 Display controller: Intel Corporation 82915G Integrated Graphics Controller
(rev 04)
Subsystem: Dell Unknown device 0179
Flags: bus master, fast devsel, latency 0
Memory at dff80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: [d0] Power Management version 2
thanks in advance
Gianluca
-- fedora-test-list mailing list fedora-test-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-test-list
