Hi, Running on rawhide here (x86_64). I can't mount a USB device at all. USB is working (it's powering a bluetooth dongle, Palm P3 and my MP3 player), but nothing is auto-mounting. The only thing of note in dmesg is Linux version 2.6.19-1.2904.fc7 usb 2-1: new full speed USB device using ohci_hcd and address 2 usb 2-1: configuration #1 chosen from 1 choice libusual: modprobe for usb-storage succeeded, but module is not present usb 2-3: new full speed USB device using ohci_hcd and address 3 usb 2-3: device descriptor read/64, error -62 usb 2-3: device descriptor read/64, error -62 usb 2-3: new full speed USB device using ohci_hcd and address 4 usb 2-3: device descriptor read/64, error -62 usb 2-3: device descriptor read/64, error -62 usb 2-3: new full speed USB device using ohci_hcd and address 5 usb 2-3: device not accepting address 5, error -62 usb 2-3: new full speed USB device using ohci_hcd and address 6 usb 2-3: device not accepting address 6, error -62 usb 2-4: new full speed USB device using ohci_hcd and address 7 usb 2-4: configuration #1 chosen from 1 choice usb 1-4: new low speed USB device using ohci_hcd and address 2 usb 1-4: device descriptor read/64, error -62 usb 1-4: device descriptor read/64, error -62 usb 1-4: new low speed USB device using ohci_hcd and address 3 usb 1-4: device descriptor read/64, error -62 usb 1-4: device descriptor read/64, error -62 usb 1-4: new low speed USB device using ohci_hcd and address 4 usb 1-4: device not accepting address 4, error -62 usb 1-4: new low speed USB device using ohci_hcd and address 5 (lots of error -62s). If I put a CD or DVD into any of my drives, they too are not automounting - I can mount them from the command line though. If I double click on the icon in nautilus, it fails to mount then as well. Do I need to file both of these problems under hal or the kernel or indeed, some other package? lsusb shows Bus 003 Device 001: ID 0000:0000 Bus 002 Device 007: ID 03f0:3004 Hewlett-Packard Bus 002 Device 002: ID 55aa:b012 OnSpec Electronic, Inc. Mitsumi FA402M 8-in-2 Card Reader Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 (the 8 in 2 is off the main board, the HP is connected at the back of the machine as are the other devices not shown) lspci shows 00:00.0 Host bridge: nVidia Corporation nForce3 250Gb Host Bridge (rev a1) 00:01.0 ISA bridge: nVidia Corporation nForce3 250Gb LPC Bridge (rev a2) 00:01.1 SMBus: nVidia Corporation nForce 250Gb PCI System Management (rev a1) 00:02.0 USB Controller: nVidia Corporation CK8S USB Controller (rev a1) 00:02.1 USB Controller: nVidia Corporation CK8S USB Controller (rev a1) 00:02.2 USB Controller: nVidia Corporation nForce3 EHCI USB 2.0 Controller (rev a2) 00:08.0 IDE interface: nVidia Corporation CK8S Parallel ATA Controller (v2.5) (rev a2) 00:0b.0 PCI bridge: nVidia Corporation nForce3 250Gb AGP Host to PCI Bridge (rev a2) 00:0e.0 PCI bridge: nVidia Corporation nForce3 250Gb PCI-to-PCI Bridge (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev a4) 02:07.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03) 02:07.1 Input device controller: Creative Labs SB Audigy Game Port (rev 03) 02:07.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port 02:08.0 SCSI storage controller: Adaptec AHA-7850 (rev 03) 02:09.0 Mass storage controller: Triones Technologies, Inc. HPT366/368/370/370A/372/372N (rev 04) 02:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 02:0b.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13) 02:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) and finally /proc/bus/usb/devices shows T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8 B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.19-1.2904.fc7 ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:00:02.2 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 4 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.19-1.2904.fc7 ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:02.1 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=55aa ProdID=b012 Rev= 1.01 S: Manufacturer= S: Product=8-in-2 S: SerialNumber=D8C1CC9553 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=200mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#= 7 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=03f0 ProdID=3004 Rev= 1.00 S: Manufacturer=Hewlett-Packard S: Product=DeskJet 980C S: SerialNumber=ES16B190F0OF C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA I: If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 4 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.19-1.2904.fc7 ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:02.0 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms Any help would be appreciated as I could do with being able to use by pen drives in the rawhide box! TTFN Paul -- "Mmmmmmmm....Shakira geschmiert mit schokolade" sagt Homer
Attachment:
signature.asc
Description: This is a digitally signed message part
-- fedora-test-list mailing list fedora-test-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-test-list