Re: FC6 + Linksys RV016 network issue

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Mike Chambers wrote:
On Wed, 2006-11-15 at 09:20 -0800, Drew Bertola wrote:

kernel 2.6.12 built w/ fc6 config works (lots of warnings and errors,
couldn't start X, but could load slashdot.org in it's entirety using
curl, so I guess it worked.

I believe tcp_ecn is not the problem since I didn't play with it and
is(that would have been an easy fix)

What I need is a kernel that doesn't exhibit this problem that will
build on fc6.

IPV6 turned on and causing it possibly?  I know you've already replied
and possibly found an answer, but turning it off might help?

Adding below to your /etc/modprobe.conf file

alias net-pf-10 off
alias ipv6 off
No, setting /proc/sys/net/ipv4/tcp_window_scaling to 0 did the trick. I did:

echo "net.ipv4.tcp_window_scaling = 0" >> /etc/sysctl.conf

to make it stick.

Here's the thing that bothers me. With earlier 2.6.x kernels (2.6.9 on CentOS, 2.6.12 built on fc6 box), the problem isn't there. I've verified that tcp_window_scaling is enabled there. Same firewall, etc.

So, what changed?
--
Drew

--
fedora-test-list mailing list
fedora-test-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-test-list

[Index of Archives]     [Fedora Desktop]     [Fedora SELinux]     [Photo Sharing]     [Yosemite Forum]     [KDE Users]