devel install woes (was FC6 T3 install woes)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



>> ----- Original Message -----
>> From: "listman" <listman@xxxxxxxxxxxxxxxx>
>> To: "For testers of Fedora Core development releases"
>> <fedora-test-list@xxxxxxxxxx>
>> Sent: Sunday, September 17, 2006 5:53 PM
>> Subject: Re: FC6 T3 install woes
>>
>>
>>> If I was to use askmethod wouldn't it use the same anaconda or is
>>> anaconda
>>> run from the source you specify. Do I need to use a different install
>>> source.
>>> sorry, I'm a little green in this area.
>>
>> It should use it from the source your selected from, now the DVD/CD that
>> you
>> initially used.
>>
>> Mike
>>
>> --
>> fedora-test-list mailing list
>> fedora-test-list@xxxxxxxxxx
>> To unsubscribe:
>> https://www.redhat.com/mailman/listinfo/fedora-test-list
>>
> thanks alot, downloading development now...
>
>
> --
> fedora-test-list mailing list
> fedora-test-list@xxxxxxxxxx
> To unsubscribe:
> https://www.redhat.com/mailman/listinfo/fedora-test-list
>
Same story with development
Here's a copy of my syslog and anaconda.log if it makes sense to anyone.

Attachment: anaconda.log
Description: Binary data

<4>Bootdata ok (command line is initrd=initrd.img BOOT_IMAGE=vmlinuz askmethod)
<5>Linux version 2.6.17-1.2630.fc6 (brewbuilder@xxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.1 20060828 (Red Hat 4.1.1-20)) #1 SMP Wed Sep 6 16:08:02 EDT 2006
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
<4> BIOS-e820: 000000000009bc00 - 000000000009c000 (reserved)
<4> BIOS-e820: 00000000000e9b90 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
<4> BIOS-e820: 000000007ffb0000 - 000000007ffbe000 (ACPI data)
<4> BIOS-e820: 000000007ffbe000 - 000000007ffe0000 (ACPI NVS)
<4> BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
<4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
<4> BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
<6>DMI 2.3 present.
<7>ACPI: RSDP (v002 ACPIAM                                ) @ 0x00000000000fb520
<7>ACPI: XSDT (v001 A M I  OEMXSDT  0x07000613 MSFT 0x00000097) @ 0x000000007ffb0100
<7>ACPI: FADT (v003 A M I  OEMFACP  0x07000613 MSFT 0x00000097) @ 0x000000007ffb0290
<7>ACPI: MADT (v001 A M I  OEMAPIC  0x07000613 MSFT 0x00000097) @ 0x000000007ffb0390
<7>ACPI: MCFG (v001 A M I  OEMMCFG  0x07000613 MSFT 0x00000097) @ 0x000000007ffb0400
<7>ACPI: OEMB (v001 A M I  AMI_OEM  0x07000613 MSFT 0x00000097) @ 0x000000007ffbe040
<7>ACPI: DSDT (v001  A0371 A0371001 0x00000001 INTL 0x02002026) @ 0x0000000000000000
<6>Scanning NUMA topology in Northbridge 24
<6>Number of nodes 1
<6>Node 0 MemBase 0000000000000000 Limit 000000007ffb0000
<7>NUMA: Using 63 for the hash shift.
<6>Using node hash shift of 63
<6>Bootmem setup node 0 0000000000000000-000000007ffb0000
<7>On node 0 totalpages: 510863
<7>  DMA zone: 1925 pages, LIFO batch:0
<7>  DMA32 zone: 508938 pages, LIFO batch:31
<6>Nvidia board detected. Ignoring ACPI timer override.
<6>ACPI: PM-Timer IO Port: 0x508
<7>ACPI: Local APIC address 0xfee00000
<6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
<6>Processor #0 15:3 APIC version 16
<6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
<6>Processor #1 15:3 APIC version 16
<6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
<6>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<4>ACPI: BIOS IRQ0 pin2 override ignored.
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
<7>ACPI: IRQ9 used by override.
<7>ACPI: IRQ14 used by override.
<7>ACPI: IRQ15 used by override.
<6>Setting APIC routing to physical flat
<6>Using ACPI (MADT) for SMP configuration information
<4>Nosave address range: 000000000009b000 - 000000000009c000
<4>Nosave address range: 000000000009c000 - 00000000000ea000
<4>Nosave address range: 00000000000ea000 - 0000000000100000
<6>Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
<6>SMP: Allowing 2 CPUs, 0 hotplug CPUs
<4>Built 1 zonelists.  Total pages: 510863
<5>Kernel command line: initrd=initrd.img BOOT_IMAGE=vmlinuz askmethod
<4>Initializing CPU#0
<4>PID hash table entries: 4096 (order: 12, 32768 bytes)
<6>Disabling vsyscall due to use of PM timer
<6>time.c: Using 3.579545 MHz WALL PM GTOD PM timer.
<6>time.c: Detected 2210.085 MHz processor.
<4>Console: colour VGA+ 80x25
<4>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
<4>... MAX_LOCKDEP_SUBCLASSES:    8
<4>... MAX_LOCK_DEPTH:          30
<4>... MAX_LOCKDEP_KEYS:        2048
<4>... CLASSHASH_SIZE:           1024
<4>... MAX_LOCKDEP_ENTRIES:     8192
<4>... MAX_LOCKDEP_CHAINS:      8192
<4>... CHAINHASH_SIZE:          4096
<4> memory used by lock dependency info: 1120 kB
<4> per task-struct memory footprint: 1680 bytes
<4>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
<4>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
<4>Checking aperture...
<4>CPU 0: aperture @ d90000000 size 32 MB
<4>Aperture too small (32 MB)
<4>No AGP bridge found
<4>Memory: 2034036k/2096832k available (2535k kernel code, 62392k reserved, 2074k data, 212k init)
<4>Calibrating delay using timer specific routine.. 4424.43 BogoMIPS (lpj=8848864)
<6>Security Framework v1.0.0 initialized
<6>SELinux:  Initializing.
<6>SELinux:  Starting in permissive mode
<6>selinux_register_security:  Registering secondary module capability
<6>Capability LSM initialized as secondary
<4>Mount-cache hash table entries: 256
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 1024K (64 bytes/line)
<6>CPU 0/0 -> Node 0
<6>CPU: Physical Processor ID: 0
<6>CPU: Processor Core ID: 0
<4>lockdep: not fixing up alternatives.
<6>ACPI: Core revision 20060707
<6>Using local APIC timer interrupts.
<4>result 12557325
<6>Detected 12.557 MHz APIC timer.
<4>lockdep: not fixing up alternatives.
<6>Booting processor 1/2 APIC 0x1
<4>Initializing CPU#1
<4>Calibrating delay using timer specific routine.. 4420.42 BogoMIPS (lpj=8840844)
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 1024K (64 bytes/line)
<6>CPU 1/1 -> Node 0
<6>CPU: Physical Processor ID: 0
<6>CPU: Processor Core ID: 1
<4>AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 02
<6>CPU 1: Syncing TSC to CPU 0.
<6>CPU 1: synchronized TSC with CPU 0 (last diff 1 cycles, maxerr 536 cycles)
<6>Brought up 2 CPUs
<6>testing NMI watchdog ... OK.
<7>sizeof(vma)=176 bytes
<7>sizeof(page)=88 bytes
<7>sizeof(inode)=1008 bytes
<7>sizeof(dentry)=256 bytes
<7>sizeof(ext3inode)=1376 bytes
<7>sizeof(buffer_head)=96 bytes
<7>sizeof(skbuff)=240 bytes
<4>migration_cost=312
<6>checking if image is initramfs... it is
<6>Freeing initrd memory: 5998k freed
<7>PM: Adding info for No Bus:platform
<6>NET: Registered protocol family 16
<6>ACPI: bus type pci registered
<6>PCI: Using MMCONFIG at e0000000
<5>PCI: No mmconfig possible on device 0:18
<6>ACPI: Interpreter enabled
<6>ACPI: Using IOAPIC for interrupt routing
<7>PM: Adding info for acpi:acpi
<6>ACPI: PCI Root Bridge [PCI0] (0000:00)
<7>PCI: Probing PCI hardware (bus 00)
<7>PM: Adding info for No Bus:pci0000:00
<7>Boot video device is 0000:03:00.0
<6>PCI: Transparent bridge - 0000:00:12.0
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>PM: Adding info for pci:0000:00:00.0
<7>PM: Adding info for pci:0000:00:00.1
<7>PM: Adding info for pci:0000:00:00.2
<7>PM: Adding info for pci:0000:00:00.3
<7>PM: Adding info for pci:0000:00:00.4
<7>PM: Adding info for pci:0000:00:00.5
<7>PM: Adding info for pci:0000:00:00.6
<7>PM: Adding info for pci:0000:00:00.7
<7>PM: Adding info for pci:0000:00:02.0
<7>PM: Adding info for pci:0000:00:03.0
<7>PM: Adding info for pci:0000:00:04.0
<7>PM: Adding info for pci:0000:00:09.0
<7>PM: Adding info for pci:0000:00:0a.0
<7>PM: Adding info for pci:0000:00:0a.1
<7>PM: Adding info for pci:0000:00:0b.0
<7>PM: Adding info for pci:0000:00:0b.1
<7>PM: Adding info for pci:0000:00:0d.0
<7>PM: Adding info for pci:0000:00:0f.0
<7>PM: Adding info for pci:0000:00:10.0
<7>PM: Adding info for pci:0000:00:11.0
<7>PM: Adding info for pci:0000:00:12.0
<7>PM: Adding info for pci:0000:00:13.0
<7>PM: Adding info for pci:0000:00:16.0
<7>PM: Adding info for pci:0000:00:17.0
<7>PM: Adding info for pci:0000:00:18.0
<7>PM: Adding info for pci:0000:00:18.1
<7>PM: Adding info for pci:0000:00:18.2
<7>PM: Adding info for pci:0000:00:18.3
<7>PM: Adding info for pci:0000:02:00.0
<7>PM: Adding info for pci:0000:03:00.0
<7>PM: Adding info for pci:0000:04:0b.0
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB2P._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE1._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE3._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *10
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
<4>ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
<4>ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
<4>ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10
<4>ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *10
<4>ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
<4>ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
<4>ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11
<4>ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *11
<4>ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>pnp: PnP ACPI init
<7>PM: Adding info for No Bus:pnp0
<7>PM: Adding info for pnp:00:00
<7>PM: Adding info for pnp:00:01
<7>PM: Adding info for pnp:00:02
<7>PM: Adding info for pnp:00:03
<7>PM: Adding info for pnp:00:04
<7>PM: Adding info for pnp:00:05
<7>PM: Adding info for pnp:00:06
<7>PM: Adding info for pnp:00:07
<7>PM: Adding info for pnp:00:08
<7>PM: Adding info for pnp:00:09
<7>PM: Adding info for pnp:00:0a
<7>PM: Adding info for pnp:00:0b
<7>PM: Adding info for pnp:00:0c
<7>PM: Adding info for pnp:00:0d
<6>pnp: PnP ACPI: found 14 devices
<6>usbcore: registered new driver usbfs
<6>usbcore: registered new driver hub
<6>PCI: Using ACPI for IRQ routing
<6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
<6>NetLabel: Initializing
<6>NetLabel:  domain hash size = 128
<6>NetLabel:  protocols = UNLABELED CIPSOv4
<6>NetLabel:  unlabeled traffic allowed by default
<6>PCI-DMA: Disabling IOMMU.
<6>pnp: 00:0b: ioport range 0xc00-0xc0f has been reserved
<6>pnp: 00:0b: ioport range 0xd00-0xd0f has been reserved
<6>pnp: 00:0b: ioport range 0xa20-0xa2f has been reserved
<6>pnp: 00:0b: ioport range 0xa30-0xa3f has been reserved
<6>PCI: Bridge: 0000:00:02.0
<6>  IO window: disabled.
<6>  MEM window: disabled.
<6>  PREFETCH window: disabled.
<6>PCI: Bridge: 0000:00:03.0
<6>  IO window: d000-dfff
<6>  MEM window: dcf00000-dcffffff
<6>  PREFETCH window: disabled.
<6>PCI: Bridge: 0000:00:04.0
<6>  IO window: e000-efff
<6>  MEM window: dd000000-dfefffff
<6>  PREFETCH window: c0000000-cfffffff
<6>PCI: Bridge: 0000:00:12.0
<6>  IO window: disabled.
<6>  MEM window: dff00000-dfffffff
<6>  PREFETCH window: disabled.
<6>PCI: Bridge: 0000:00:16.0
<6>  IO window: disabled.
<6>  MEM window: disabled.
<6>  PREFETCH window: disabled.
<6>PCI: Bridge: 0000:00:17.0
<6>  IO window: disabled.
<6>  MEM window: disabled.
<6>  PREFETCH window: disabled.
<7>PCI: Setting latency timer of device 0000:00:02.0 to 64
<7>PCI: Setting latency timer of device 0000:00:03.0 to 64
<7>PCI: Setting latency timer of device 0000:00:04.0 to 64
<7>PCI: Setting latency timer of device 0000:00:12.0 to 64
<7>PCI: Setting latency timer of device 0000:00:16.0 to 64
<7>PCI: Setting latency timer of device 0000:00:17.0 to 64
<6>NET: Registered protocol family 2
<4>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
<4>TCP established hash table entries: 65536 (order: 9, 3670016 bytes)
<4>TCP bind hash table entries: 32768 (order: 8, 1835008 bytes)
<6>TCP: Hash tables configured (established 65536 bind 32768)
<6>TCP reno registered
<7>PM: Adding info for platform:pcspkr
<6>audit: initializing netlink socket (disabled)
<5>audit(1158518748.792:1): initialized
<4>Total HugeTLB memory allocated, 0
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>SELinux:  Registering netfilter hooks
<6>Initializing Cryptographic API
<4>ksign: Installing public key data
<4>Loading keyring
<4>- Added public key 880793BEAE9CD1B3
<4>- User ID: Red Hat, Inc. (Kernel Module GPG key)
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<6>PCI: Linking AER extended capability on 0000:00:16.0
<6>PCI: Linking AER extended capability on 0000:00:17.0
<7>PCI: Setting latency timer of device 0000:00:02.0 to 64
<4>pcie_portdrv_probe->Dev[02fc:10de] has invalid IRQ. Check vendor BIOS
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:02.0:pcie00]
<7>PM: Adding info for pci_express:0000:00:02.0:pcie00
<7>Allocate Port Service[0000:00:02.0:pcie03]
<7>PM: Adding info for pci_express:0000:00:02.0:pcie03
<7>PCI: Setting latency timer of device 0000:00:03.0 to 64
<4>pcie_portdrv_probe->Dev[02fd:10de] has invalid IRQ. Check vendor BIOS
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:03.0:pcie00]
<7>PM: Adding info for pci_express:0000:00:03.0:pcie00
<7>Allocate Port Service[0000:00:03.0:pcie03]
<7>PM: Adding info for pci_express:0000:00:03.0:pcie03
<7>PCI: Setting latency timer of device 0000:00:04.0 to 64
<4>pcie_portdrv_probe->Dev[02fb:10de] has invalid IRQ. Check vendor BIOS
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:04.0:pcie00]
<7>PM: Adding info for pci_express:0000:00:04.0:pcie00
<7>Allocate Port Service[0000:00:04.0:pcie03]
<7>PM: Adding info for pci_express:0000:00:04.0:pcie03
<7>PCI: Setting latency timer of device 0000:00:16.0 to 64
<4>pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:16.0:pcie00]
<7>PM: Adding info for pci_express:0000:00:16.0:pcie00
<7>Allocate Port Service[0000:00:16.0:pcie03]
<7>PM: Adding info for pci_express:0000:00:16.0:pcie03
<7>PCI: Setting latency timer of device 0000:00:17.0 to 64
<4>pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:17.0:pcie00]
<7>PM: Adding info for pci_express:0000:00:17.0:pcie00
<7>Allocate Port Service[0000:00:17.0:pcie03]
<7>PM: Adding info for pci_express:0000:00:17.0:pcie03
<6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
<7>PM: Adding info for platform:vesafb.0
<6>ACPI: Processor [CPU1] (supports 8 throttling states)
<6>Real Time Clock Driver v1.12ac
<6>Non-volatile memory driver v1.2
<6>Linux agpgart interface v0.101 (c) Dave Jones
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
<7>PM: Adding info for platform:serial8250
<6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<4>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>NFORCE-CK804: IDE controller at PCI slot 0000:00:0f.0
<6>NFORCE-CK804: chipset revision 243
<6>NFORCE-CK804: not 100% native mode: will probe irqs later
<6>NFORCE-CK804: 0000:00:0f.0 (rev f3) UDMA133 controller
<6>    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio
<6>    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:DMA
<7>Probing IDE interface ide0...
<7>Probing IDE interface ide1...
<4>hdd: PIONEER DVD-RW DVR-108, ATAPI CD/DVD-ROM drive
<7>PM: Adding info for No Bus:ide1
<4>ide1 at 0x170-0x177,0x376 on irq 15
<7>PM: Adding info for ide:1.1
<7>Probing IDE interface ide0...
<4>ide-floppy driver 0.99.newide
<6>usbcore: registered new driver libusual
<6>usbcore: registered new driver hiddev
<6>usbcore: registered new driver usbhid
<6>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
<6>PNP: No PS/2 controller found. Probing ports directly.
<7>PM: Adding info for platform:i8042
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<7>PM: Adding info for serio:serio0
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<7>PM: Adding info for serio:serio1
<6>mice: PS/2 mouse device common for all mice
<6>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: bitmap version 4.39
<6>TCP bic registered
<6>Initializing IPsec netlink socket
<6>NET: Registered protocol family 1
<6>NET: Registered protocol family 17
<6>powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ processors (version 2.10.00)
<3>powernow-k8: MP systems not supported by PSB BIOS structure
<3>powernow-k8: MP systems not supported by PSB BIOS structure
<6>ACPI: (supports S0 S1 S3 S4 S5)
<6>Freeing unused kernel memory: 212k freed
<4>Write protecting the kernel read-only data: 477k
<5>FS-Cache: Loaded
<4>FS-Cache: netfs 'nfs' registered for caching
<6>loop: loaded (max 8 devices)
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<7>PM: Adding info for platform:floppy.0
<6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
<6>input: PC Speaker as /class/input/input0
<6>squashfs: version 3.1 (2006/08/09) Phillip Lougher
<6>NET: Registered protocol family 10
<6>lo: Disabled Privacy Extensions
<6>IPv6 over IPv4 tunneling driver
<6>hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(66)
<6>Uniform CD-ROM driver Revision: 3.20
<5>SCSI subsystem initialized
<6>Loading iSCSI transport class v2.0-685.<5>iscsi: registered transport (tcp)
<4>ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
<6>GSI 16 sharing vector 0xE1 and IRQ 16
<6>ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUB2] -> GSI 23 (level, low) -> IRQ 225
<7>PCI: Setting latency timer of device 0000:00:0b.1 to 64
<6>ehci_hcd 0000:00:0b.1: EHCI Host Controller
<6>ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
<6>ehci_hcd 0000:00:0b.1: debug port 1
<7>PCI: cache line size of 64 is not supported by device 0000:00:0b.1
<6>ehci_hcd 0000:00:0b.1: irq 225, io mem 0xdceffc00
<6>ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<7>PM: Adding info for usb:usb1
<7>PM: Adding info for No Bus:usbdev1.1_ep00
<6>usb usb1: configuration #1 chosen from 1 choice
<7>PM: Adding info for usb:1-0:1.0
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 10 ports detected
<7>PM: Adding info for No Bus:usbdev1.1_ep81
<7>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
<4>ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22
<6>GSI 17 sharing vector 0xE9 and IRQ 17
<6>ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUB0] -> GSI 22 (level, low) -> IRQ 233
<7>PCI: Setting latency timer of device 0000:00:0b.0 to 64
<6>ohci_hcd 0000:00:0b.0: OHCI Host Controller
<6>ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
<6>ohci_hcd 0000:00:0b.0: irq 233, io mem 0xdcefe000
<7>PM: Adding info for usb:usb2
<7>PM: Adding info for No Bus:usbdev2.1_ep00
<6>usb usb2: configuration #1 chosen from 1 choice
<7>PM: Adding info for usb:2-0:1.0
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 10 ports detected
<7>PM: Adding info for No Bus:usbdev2.1_ep81
<6>usb 2-5: new low speed USB device using ohci_hcd and address 2
<7>PM: Adding info for usb:2-5
<7>PM: Adding info for No Bus:usbdev2.2_ep00
<6>usb 2-5: configuration #1 chosen from 1 choice
<7>PM: Adding info for usb:2-5:1.0
<6>input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /class/input/input1
<6>input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:0b.0-5
<7>PM: Adding info for No Bus:usbdev2.2_ep81
<6>usb 2-6: new full speed USB device using ohci_hcd and address 3
<7>PM: Adding info for usb:2-6
<7>PM: Adding info for No Bus:usbdev2.3_ep00
<6>usb 2-6: configuration #1 chosen from 1 choice
<7>PM: Adding info for usb:2-6:1.0
<6>hub 2-6:1.0: USB hub found
<6>hub 2-6:1.0: 3 ports detected
<7>PM: Adding info for No Bus:usbdev2.3_ep81
<6>usb 2-6.2: new full speed USB device using ohci_hcd and address 4
<7>PM: Adding info for usb:2-6.2
<7>PM: Adding info for No Bus:usbdev2.4_ep00
<6>usb 2-6.2: configuration #1 chosen from 1 choice
<7>PM: Adding info for usb:2-6.2:1.0
<6>input: Logitech Logitech BT Mini-Receiver as /class/input/input2
<6>input: USB HID v1.11 Keyboard [Logitech Logitech BT Mini-Receiver] on usb-0000:00:0b.0-6.2
<7>PM: Adding info for No Bus:usbdev2.4_ep81
<6>usb 2-6.3: new full speed USB device using ohci_hcd and address 5
<7>PM: Adding info for usb:2-6.3
<7>PM: Adding info for No Bus:usbdev2.5_ep00
<6>usb 2-6.3: configuration #1 chosen from 1 choice
<7>PM: Adding info for usb:2-6.3:1.0
<6>input: Logitech Logitech BT Mini-Receiver as /class/input/input3
<6>input,hiddev96: USB HID v1.11 Mouse [Logitech Logitech BT Mini-Receiver] on usb-0000:00:0b.0-6.3
<7>PM: Adding info for No Bus:usbdev2.5_ep81
<7>ieee1394: Initialized config rom entry `ip1394'
<4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19
<6>GSI 18 sharing vector 0x32 and IRQ 18
<6>ACPI: PCI Interrupt 0000:04:0b.0[A] -> Link [LNKA] -> GSI 19 (level, low) -> IRQ 50
<7>PM: Adding info for ieee1394:fw-host0
<6>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[50]  MMIO=[dffff800-dfffffff]  Max Packet=[2048]  IR/IT contexts=[4/8]
<7>PM: Adding info for ieee1394:0011d80000ba1447
<7>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d80000ba1447]
<7>PM: Adding info for ieee1394:0011d80000ba1447-0
<6>ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 19 (level, low) -> IRQ 50
<7>PCI: Setting latency timer of device 0000:02:00.0 to 64
<6>sky2 v1.5 addr 0xdcffc000 irq 50 Yukon-EC (0xb6) rev 2
<6>sky2 eth0: addr 00:17:31:ce:4e:04
<4>sky2 0000:02:00.0: No interrupt was generated using MSI, switching to INTx mode. Please report this failure to the PCI maintainer and include system chipset information.
<6>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.56.
<4>ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
<6>GSI 19 sharing vector 0x42 and IRQ 19
<6>ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LMAC] -> GSI 21 (level, low) -> IRQ 66
<7>PCI: Setting latency timer of device 0000:00:13.0 to 64
<6>forcedeth: using HIGHDMA
<6>eth1: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:13.0
<7>libata version 2.00 loaded.
<7>sata_nv 0000:00:10.0: version 2.0
<4>ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
<6>GSI 20 sharing vector 0x4A and IRQ 20
<6>ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LSA0] -> GSI 20 (level, low) -> IRQ 74
<7>PCI: Setting latency timer of device 0000:00:10.0 to 64
<6>ata1: SATA max UDMA/133 cmd 0xBC00 ctl 0xB882 bmdma 0xB400 irq 74
<6>ata2: SATA max UDMA/133 cmd 0xB800 ctl 0xB482 bmdma 0xB408 irq 74
<6>scsi0 : sata_nv
<7>PM: Adding info for No Bus:host0
<6>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata1.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 0/32)
<6>ata1.00: ata1: dev 0 multi count 16
<6>ata1.00: configured for UDMA/133
<6>scsi1 : sata_nv
<7>PM: Adding info for No Bus:host1
<6>ata2: SATA link down (SStatus 0 SControl 300)
<7>PM: Adding info for No Bus:target0:0:0
<5>  Vendor: ATA       Model: ST3250620AS       Rev: 3.AA
<5>  Type:   Direct-Access                      ANSI SCSI revision: 05
<7>PM: Adding info for scsi:0:0:0:0
<5>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
<5>sda: Write Protect is off
<7>sda: Mode Sense: 00 3a 00 00
<5>SCSI device sda: drive cache: write back
<5>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
<5>sda: Write Protect is off
<7>sda: Mode Sense: 00 3a 00 00
<5>SCSI device sda: drive cache: write back
<6> sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
<5>sd 0:0:0:0: Attached scsi disk sda
<4>ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 23
<6>ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LSA1] -> GSI 23 (level, low) -> IRQ 225
<7>PCI: Setting latency timer of device 0000:00:11.0 to 64
<6>ata3: SATA max UDMA/133 cmd 0xB080 ctl 0xB002 bmdma 0xA800 irq 225
<6>ata4: SATA max UDMA/133 cmd 0xAC00 ctl 0xA882 bmdma 0xA808 irq 225
<6>scsi2 : sata_nv
<7>PM: Adding info for No Bus:host2
<6>ata3: SATA link down (SStatus 0 SControl 300)
<6>scsi3 : sata_nv
<7>PM: Adding info for No Bus:host3
<6>ata4: SATA link down (SStatus 0 SControl 300)
<7>eth1: no IPv6 routers present
<4>Unable to identify CD-ROM format.
<4>VFS: Can't find an ext2 filesystem on dev loop0.
<6>security:  3 users, 6 roles, 1532 types, 159 bools, 1 sens, 256 cats
<6>security:  58 classes, 47255 rules
<6>SELinux:  Completing initialization.
<6>SELinux:  Setting up existing superblocks.
<6>SELinux: initialized (dev loop0, type squashfs), not configured for labeling
<6>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
<6>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
<6>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
<6>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<6>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
<6>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
<6>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
<6>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
<6>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
<6>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
<6>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
<6>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<6>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
<6>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
<6>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
<6>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
<6>SELinux: initialized (dev proc, type proc), uses genfs_contexts
<6>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
<6>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
<6>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
<5>audit(1158518903.925:2): policy loaded auid=4294967295
<6>md: raid0 personality registered for level 0
<6>md: raid1 personality registered for level 1
<6>raid5: automatically using best checksumming function: generic_sse
<4>   generic_sse:  7070.000 MB/sec
<4>raid5: using function: generic_sse (7070.000 MB/sec)
<4>raid6: int64x1   1592 MB/s
<4>raid6: int64x2   2180 MB/s
<4>raid6: int64x4   1751 MB/s
<4>raid6: int64x8   1979 MB/s
<4>raid6: sse2x1    2566 MB/s
<4>raid6: sse2x2    3583 MB/s
<4>raid6: sse2x4    3932 MB/s
<4>raid6: using algorithm sse2x4 (3932 MB/s)
<6>md: raid6 personality registered for level 6
<6>md: raid5 personality registered for level 5
<6>md: raid4 personality registered for level 4
<4>GFS2 (built Sep  6 2006 16:09:57) installed
<6>Lock_Nolock (built Sep  6 2006 16:10:14) installed
<6>JFS: nTxBlock = 8192, nTxLock = 65536
<6>SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
<6>SGI XFS Quota Management subsystem
<6>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@xxxxxxxxxx
<6>device-mapper: multipath: version 1.0.4 loaded
<6>device-mapper: multipath round-robin: version 1.0.0 loaded
<6>device-mapper: multipath emc: version 0.0.3 loaded
<5>audit(1158518905.881:3): audit_pid=788 old=0 by auid=4294967295 subj=system_u:system_r:anaconda_t:s0
<5>ReiserFS: sda7: found reiserfs format "3.6" with standard journal
<5>ReiserFS: sda7: using ordered data mode
<5>ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: sda7: checking transaction log (sda7)
<5>ReiserFS: sda7: Using r5 hash to sort names
<6>SELinux: initialized (dev sda7, type reiserfs), uses genfs_contexts
<3>BUG: Dentry ffff810071d52ea8{i=3,n=.reiserfs_priv} still in use (1) [unmount of reiserfs sda7]
<4>----------- [cut here ] --------- [please bite here ] ---------
<1>Kernel BUG at fs/dcache.c:615
<0>invalid opcode: 0000 [1] SMP 
<1>last sysfs file: /block/ram0/dev
<4>CPU 0 
<4>Modules linked in: dm_emc dm_round_robin dm_multipath dm_snapshot dm_mirror dm_zero dm_mod xfs jfs reiserfs lock_nolock gfs2 ext3 jbd msdos raid456 xor raid1 raid0 sata_nv libata forcedeth sky2 ohci1394 ieee1394 ohci_hcd ehci_hcd iscsi_tcp libiscsi scsi_transport_iscsi sr_mod sd_mod scsi_mod ide_cd cdrom ipv6 squashfs pcspkr edd floppy loop nfs nfs_acl fscache lockd sunrpc vfat fat cramfs
<4>Pid: 785, comm: anaconda Not tainted 2.6.17-1.2630.fc6 #1
<4>RIP: 0010:[<ffffffff802eb19c>]  [<ffffffff802eb19c>] shrink_dcache_for_umount_subtree+0x19e/0x265
<4>RSP: 0000:ffff810077aa9da8  EFLAGS: 00010292
<4>RAX: 0000000000000062 RBX: ffff810071d52ea8 RCX: 0000000000000001
<4>RDX: 0000000000000000 RSI: ffff8100789e2840 RDI: ffff8100789e2100
<4>RBP: ffff810077aa9dd8 R08: ffff810077aa9be8 R09: ffffffff80217880
<4>R10: ffffffff80217880 R11: 0000000000000002 R12: ffff8100728cb930
<4>R13: ffff810071d52f30 R14: 0000000000000000 R15: 0000000000000001
<4>FS:  00002aaaabbec120(0000) GS:ffffffff8093d000(0000) knlGS:0000000000000000
<4>CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
<4>CR2: 0000000000625d50 CR3: 0000000079328000 CR4: 00000000000006e0
<4>Process anaconda (pid: 785, threadinfo ffff810077aa8000, task ffff8100789e2100)
<4>Stack:  ffff810071e277f0 ffff810071b4d5d0 ffff810077aa9dd8 ffff810071e273f8
<4> ffffffff88480e40 0000000000000000 ffff810077aa9df8 ffffffff802eb5e5
<4> 0000000000000000 ffff810071e273f8 ffff810077aa9e28 ffffffff802e3d96
<4>Call Trace:
<4> [<ffffffff802eb5e5>] shrink_dcache_for_umount+0x3d/0x4e
<4> [<ffffffff802e3d96>] generic_shutdown_super+0x24/0x10d
<4> [<ffffffff802e3ea5>] kill_block_super+0x26/0x3b
<4> [<ffffffff802e3f90>] deactivate_super+0x6f/0x84
<4> [<ffffffff8022ef2d>] mntput_no_expire+0x56/0x9a
<4> [<ffffffff802345e8>] path_release_on_umount+0x1d/0x21
<4> [<ffffffff802ed5d4>] sys_umount+0x24e/0x294
<4> [<ffffffff8026060e>] system_call+0x7e/0x83
<4>DWARF2 unwinder stuck at system_call+0x7e/0x83
<4>Leftover inexact backtrace:
<4>
<4>
<4>Code: 0f 0b 68 c1 90 4a 80 c2 67 02 41 5c 41 5d 4c 8b 63 50 49 39 
<1>RIP  [<ffffffff802eb19c>] shrink_dcache_for_umount_subtree+0x19e/0x265
<4> RSP <ffff810077aa9da8>
<4> 
<4>=====================================
<4>[ BUG: lock held at task exit time! ]
<4>-------------------------------------
<4>anaconda/785 is exiting with locks still held!
<4>1 lock held by anaconda/785:
<4> #0:  (&type->s_umount_key#22){--..}, at: [<ffffffff802e3f88>] deactivate_super+0x67/0x84
<4>
<4>stack backtrace:
<4>
<4>Call Trace:
<4> [<ffffffff8026e97d>] show_trace+0xae/0x336
<4> [<ffffffff8026ec1a>] dump_stack+0x15/0x17
<4> [<ffffffff802a6ff2>] debug_check_no_locks_held+0x87/0x8b
<4> [<ffffffff80216575>] do_exit+0x8c2/0x911
<4> [<ffffffff8026ee48>] kernel_math_error+0x0/0x96
<4> [<ffff8100789e2100>]
<4>DWARF2 unwinder stuck at 0xffff8100789e2100
<4>Leftover inexact backtrace:
<4> [<ffffffff80268716>] do_trap+0xe0/0xef
<4> [<ffffffff8026f478>] do_invalid_op+0xac/0xb8
<4> [<ffffffff802eb19c>] shrink_dcache_for_umount_subtree+0x19e/0x265
<4> [<ffffffff8029361f>] printk+0x6c/0xe2
<4> [<ffffffff80261391>] error_exit+0x0/0x96
<4> [<ffffffff80217880>] release_console_sem+0x4c/0x22c
<4> [<ffffffff80217880>] release_console_sem+0x4c/0x22c
<4> [<ffffffff802eb19c>] shrink_dcache_for_umount_subtree+0x19e/0x265
<4> [<ffffffff802eb19c>] shrink_dcache_for_umount_subtree+0x19e/0x265
<4> [<ffffffff802eb5e5>] shrink_dcache_for_umount+0x3d/0x4e
<4> [<ffffffff802e3d96>] generic_shutdown_super+0x24/0x10d
<4> [<ffffffff802e3ea5>] kill_block_super+0x26/0x3b
<4> [<ffffffff802e3f90>] deactivate_super+0x6f/0x84
<4> [<ffffffff8022ef2d>] mntput_no_expire+0x56/0x9a
<4> [<ffffffff802345e8>] path_release_on_umount+0x1d/0x21
<4> [<ffffffff802ed5d4>] sys_umount+0x24e/0x294
<4> [<ffffffff80267412>] trace_hardirqs_on_thunk+0x35/0x37
<4> [<ffffffff802a7fc4>] trace_hardirqs_on+0x119/0x13d
<4> [<ffffffff80267412>] trace_hardirqs_on_thunk+0x35/0x37
<4> [<ffffffff80223564>] __up_read+0x1a/0x83
<4> [<ffffffff8026060e>] system_call+0x7e/0x83
<4>
-- 
fedora-test-list mailing list
fedora-test-list@xxxxxxxxxx
To unsubscribe: 
https://www.redhat.com/mailman/listinfo/fedora-test-list

[Index of Archives]     [Fedora Desktop]     [Fedora SELinux]     [Photo Sharing]     [Yosemite Forum]     [KDE Users]