Hi, I have problems installing fc6test2 on an ICH6 based system with a sata drive. Anaconda complains about a missing harddisk and reboots the system. The bios has no pata compatibility settings. Anaconda seems to load the ata_piix driver. alt-f4 shows the following messages: from ata1: port is slow to respong, please be patient. port failed to respond (30sec) SRST failed (status 0xff) SRST failed (err_mask 0x100) softreset failed, retrying in 5 secs . . . reset failed, giving up from ata2: sata port has no device abnormal status 0xff on port 0xaeff Any suggestions ? cu romal -- fedora-test-list mailing list fedora-test-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-test-list