Dear Fedora Dev Team,
I have attached a "System State" dump of a crash that occured during the message that says "Starting Installation...This may take several minutes".
Let me know if you need more information.
Sincerely,
Arthur Baldwin
Yahoo! Mail
Bring photos to life! New PhotoMail makes sharing a breeze.
Traceback (most recent call last):
File "/usr/lib/anaconda/gui.py", line 1253, in handleRenderCallback
self.currentWindow.renderCallback()
File "/usr/lib/anaconda/iw/progress_gui.py", line 245, in renderCallback
self.intf.icw.nextClicked()
File "/usr/lib/anaconda/gui.py", line 951, in nextClicked
self.dispatch.gotoNext()
File "/usr/lib/anaconda/dispatch.py", line 146, in gotoNext
self.moveStep()
File "/usr/lib/anaconda/dispatch.py", line 217, in moveStep
rc = apply(func, self.bindArgs(args))
File "/usr/lib/anaconda/backend.py", line 160, in doInstall
backend.doInstall(intf, id, instPath)
File "/usr/lib/anaconda/yuminstall.py", line 901, in doInstall
self.ayum.run(self.instLog, cb, intf)
File "/usr/lib/anaconda/yuminstall.py", line 425, in run
self.populateTs(keepold=0)
File "/usr/lib/anaconda/yuminstall.py", line 482, in populateTs
self.downloadHeader(txmbr.po)
File "/usr/lib/anaconda/yuminstall.py", line 546, in downloadHeader
yum.YumBase.downloadHeader(self, po)
File "/usr/lib/python2.4/site-packages/yum/__init__.py", line 708, in downloadHeader
cache=repo.http_caching != 'none',
File "/usr/lib/python2.4/site-packages/yum/repos.py", line 625, in get
http_headers=headers,
File "/usr/lib/python2.4/site-packages/urlgrabber/mirror.py", line 414, in urlgrab
return self._mirror_try(func, url, kw)
File "/usr/lib/python2.4/site-packages/urlgrabber/mirror.py", line 400, in _mirror_try
return func_ref( *(fullurl,), **kwargs )
File "/usr/lib/python2.4/site-packages/urlgrabber/grabber.py", line 618, in urlgrab
return self._retry(opts, retryfunc, url, filename)
File "/usr/lib/python2.4/site-packages/urlgrabber/grabber.py", line 547, in _retry
return apply(func, (opts,) + args, {})
File "/usr/lib/python2.4/site-packages/urlgrabber/grabber.py", line 606, in retryfunc
fo._do_grab()
File "/usr/lib/python2.4/site-packages/urlgrabber/grabber.py", line 920, in _do_grab
block = self.read(bs)
File "/usr/lib/python2.4/site-packages/urlgrabber/grabber.py", line 987, in read
self._fill_buffer(amt)
File "/usr/lib/python2.4/site-packages/urlgrabber/grabber.py", line 967, in _fill_buffer
new = self.fo.read(readamount)
File "/usr/lib/python2.4/site-packages/urlgrabber/byterange.py", line 148, in read
rslt = self.fo.read(size)
IOError: [Errno 5] Input/output error
Local variables in innermost frame:
self: <closed file '/mnt/source/Fedora/RPMS/mdadm-2.2-1.fc5.2.1.i386.rpm', mode 'rb' at 0xb3ca9b18>
size: 8192
Dispatcher instance, containing members:
intf: InstallInterface instance, containing members:
intf.ppw: InstallProgressWindow_NEW instance, containing members:
intf.ppw.intf: Already dumped
intf.ppw.timeStarted: -1
intf.ppw.sizeComplete: 0
intf.ppw.lastTimeEstimate: None
intf.ppw.pixcurnum: 0
intf.ppw.totalFiles: 177697
intf.ppw.totalProgress: <gtk.ProgressBar object (GtkProgressBar) at 0xb4b5316c>
intf.ppw.wrappedpixlist: 0
intf.ppw.pixtimer: None
intf.ppw.adpix: <gtk.Image object (GtkImage) at 0xb6e79af4>
intf.ppw.curPackage: {'summary': <gtk.Label object (GtkLabel) at 0xb4b52e8c>, 'package': <gtk.Label object (GtkLabel) at 0xc58bcfc>}
intf.ppw.estimateHistory: []
intf.ppw.ics: InstallControlState instance, containing members:
intf.ppw.ics.helpButtonEnabled: False
intf.ppw.ics.searchPath: ('/mnt/source/RHupdates', '/tmp/updates', './', '/usr/share/anaconda/')
intf.ppw.ics.grabNext: True
intf.ppw.ics.title: Installing Packages
intf.ppw.ics.htmlFile: installing
intf.ppw.ics.html:
intf.ppw.ics.helpEnabled: True
intf.ppw.ics.nextEnabled: False
intf.ppw.ics.prevEnabled: False
intf.ppw.ics.cw: InstallControlWindow instance, containing members:
intf.ppw.ics.cw.displayHelp: False
intf.ppw.ics.cw.releaseNotesViewerPid: None
intf.ppw.ics.cw.handle: 854
intf.ppw.ics.cw.releaseNotesStartViewerAttempts: 0
intf.ppw.ics.cw.releaseNotesType: text
intf.ppw.ics.cw.mainxml: <gtk.glade.XML object (PyGladeXML) at 0xb7a781bc>
intf.ppw.ics.cw.dispatch: Already dumped
intf.ppw.ics.cw.reloadRcQueued: 0
intf.ppw.ics.cw.ii: Already dumped
intf.ppw.ics.cw.currentWindow: Already dumped
intf.ppw.ics.cw.window: <gtk.Window object (GtkWindow) at 0xb792e5f4>
intf.ppw.ics.cw.installFrame: <gtk.Frame object (GtkFrame) at 0xb792e66c>
intf.ppw.ics.cw.releaseNotesStartViewer: 0
intf.ppw.ics.cw.id: InstallData instance, containing members:
intf.ppw.ics.cw.id.dbpath: None
intf.ppw.ics.cw.id.firewall: Firewall instance, containing members:
intf.ppw.ics.cw.id.firewall.portlist: [22:tcp]
intf.ppw.ics.cw.id.firewall.trustdevs: []
intf.ppw.ics.cw.id.firewall.enabled: 1
intf.ppw.ics.cw.id.rootParts: []
intf.ppw.ics.cw.id.upgradeDeps:
intf.ppw.ics.cw.id.upgradeRoot: []
intf.ppw.ics.cw.id.xsetup: XSetup instance, containing members:
intf.ppw.ics.cw.id.xsetup.skipx: 0
intf.ppw.ics.cw.id.xsetup.imposed_sane_default: 0
intf.ppw.ics.cw.id.xsetup.xhwstate: XF86HardwareState instance, containing members:
intf.ppw.ics.cw.id.xsetup.xhwstate.probed_physical_height: 0
intf.ppw.ics.cw.id.xsetup.xhwstate.probed_video_ram: 31680
intf.ppw.ics.cw.id.xsetup.xhwstate.videocard_PCIBus: None
intf.ppw.ics.cw.id.xsetup.xhwstate.colordepth: 16
intf.ppw.ics.cw.id.xsetup.xhwstate.monitor_name: Unknown monitor
intf.ppw.ics.cw.id.xsetup.xhwstate.dri_enabled: 1
intf.ppw.ics.cw.id.xsetup.xhwstate.monitor: monName: Unknown monitor
monID: Unprobed Monitor
monHoriz: 31.5-37.9
monVert: 50-70
physicalWidth: 0
physicalHeight: 0
intf.ppw.ics.cw.id.xsetup.xhwstate.videocard_name: S3 Inc. VT8375 [ProSavage8 KM266/KL266]
intf.ppw.ics.cw.id.xsetup.xhwstate.video_ram: 0
intf.ppw.ics.cw.id.xsetup.xhwstate.videocard_driver: savage
intf.ppw.ics.cw.id.xsetup.xhwstate.videocard_options: []
intf.ppw.ics.cw.id.xsetup.xhwstate.vsync: 50-70
intf.ppw.ics.cw.id.xsetup.xhwstate.physical_height: 0
intf.ppw.ics.cw.id.xsetup.xhwstate.probed_vsync: 50-70
intf.ppw.ics.cw.id.xsetup.xhwstate.physical_width: 0
intf.ppw.ics.cw.id.xsetup.xhwstate.hsync: 31.5-37.9
intf.ppw.ics.cw.id.xsetup.xhwstate.probed_physical_width: 0
intf.ppw.ics.cw.id.xsetup.xhwstate.xconfig: None
intf.ppw.ics.cw.id.xsetup.xhwstate.all_resolutions: [640x480, 800x480, 800x600, 1024x600, 1024x768, 1152x768, 1152x864, 1280x800, 1280x960, 1280x1024, 1400x1050, 1440x900, 1600x1200, 1680x1050, 1900x1200, 1920x1200, 1920x1440, 2048x1536]
intf.ppw.ics.cw.id.xsetup.xhwstate.videocard: primary: 0
vidCards: [<rhpxl.videocard.VideoCard instance at 0xb7e7b1ec>]
Primary Video Card Info:
device: None
driver : savage
descr : S3 Inc. VT8375 [ProSavage8 KM266/KL266]
vidRam: 31680
intf.ppw.ics.cw.id.xsetup.xhwstate.videocard_PCIFn: None
intf.ppw.ics.cw.id.xsetup.xhwstate.probed_hsync: 31.5-37.9
intf.ppw.ics.cw.id.xsetup.xhwstate.resolution: 800x600
intf.ppw.ics.cw.id.xsetup.xhwstate.videocard_PCIDev: None
intf.ppw.ics.cw.id.accounts: <Type Accounts>
intf.ppw.ics.cw.id.keyboard: Keyboard instance, containing members:
intf.ppw.ics.cw.id.keyboard.info: {'KEYBOARDTYPE': pc, 'KEYTABLE': us}
intf.ppw.ics.cw.id.keyboard.type: PC
intf.ppw.ics.cw.id.keyboard.beenset: 1
intf.ppw.ics.cw.id.keyboard._mods: KeyboardModels instance, containing members:
intf.ppw.ics.cw.id.timezone: Timezone instance, containing members:
intf.ppw.ics.cw.id.timezone.utc: False
intf.ppw.ics.cw.id.timezone.utcOffset: 0
intf.ppw.ics.cw.id.timezone.arc: 0
intf.ppw.ics.cw.id.timezone.tz: America/Los_Angeles
intf.ppw.ics.cw.id.timezone.dst: 0
intf.ppw.ics.cw.id.mouse: FULLNAME="Generic - 3 Button Mouse (PS/2)"
MOUSETYPE="imps2"
XEMU3="no"
XMOUSETYPE="IMPS/2"
intf.ppw.ics.cw.id.backend: YumBackend instance, containing members:
intf.ppw.ics.cw.id.backend.ac: AnacondaYumConf instance, containing members:
intf.ppw.ics.cw.id.backend.ac.yumconfstr:
[main]
cachedir=/var/cache/yum
reposdir=/tmp/repos.d
debuglevel=2
logfile=/tmp/yum.log
pkgpolicy=newest
distroverpkg=redhat-release
tolerant=1
exactarch=1
retries=5
obsoletes=1
gpgcheck=0
installroot=/mnt/sysimage
exclude=*debuginfo*
[anaconda]
baseurl=file:///mnt/source
enabled=1
gpgcheck=0
gpgkey=file:///mnt/source/RPM-GPG-KEY-fedora
intf.ppw.ics.cw.id.backend.ac.configfile: /tmp/yum.conf
intf.ppw.ics.cw.id.backend.ac.root: /mnt/sysimage
intf.ppw.ics.cw.id.backend.ac.methodstr: file:///mnt/source
intf.ppw.ics.cw.id.backend.modeText: Installing %s-%s-%s.%s.
intf.ppw.ics.cw.id.backend.instPath: /mnt/sysimage
intf.ppw.ics.cw.id.backend.totalSize: 3009735
intf.ppw.ics.cw.id.backend.instLog: <open file '/mnt/sysimage/root/install.log', mode 'w+' at 0xb3ca26e0>
intf.ppw.ics.cw.id.backend.ayum: <yuminstall.AnacondaYum object at 0xb7a52c4c>
intf.ppw.ics.cw.id.backend.method: CdromInstallMethod instance, containing members:
intf.ppw.ics.cw.id.backend.method.messageWindow: <bound method InstallInterface.messageWindow of <gui.InstallInterface instance at 0xb7a3d64c>>
intf.ppw.ics.cw.id.backend.method.splitmethod: True
intf.ppw.ics.cw.id.backend.method.intf: Already dumped
intf.ppw.ics.cw.id.backend.method.timestamp: 1140120001.114809
intf.ppw.ics.cw.id.backend.method.tree: /mnt/source
intf.ppw.ics.cw.id.backend.method.rootPath: /mnt/sysimage
intf.ppw.ics.cw.id.backend.method.loopbackFile: /mnt/sysimage//rhinstall-stage2.img
intf.ppw.ics.cw.id.backend.method.progressWindow: <bound method InstallInterface.progressWindow of <gui.InstallInterface instance at 0xb7a3d64c>>
intf.ppw.ics.cw.id.backend.method.device: hdb
intf.ppw.ics.cw.id.backend.method.currentMedia: [1, 2, 3, 4, 5]
intf.ppw.ics.cw.id.backend.totalFiles: 177697
intf.ppw.ics.cw.id.upgrade: None
intf.ppw.ics.cw.id.monitor: Already dumped
intf.ppw.ics.cw.id.iscsi: iscsi instance, containing members:
intf.ppw.ics.cw.id.methodstr: cdrom://hdb:/mnt/source
intf.ppw.ics.cw.id.fsset: FileSystemSet instance, containing members:
intf.ppw.ics.cw.id.fsset.messageWindow: <bound method InstallInterface.messageWindow of <gui.InstallInterface instance at 0xb7a3d64c>>
intf.ppw.ics.cw.id.fsset.volumesCreated: 1
intf.ppw.ics.cw.id.fsset.progressWindow: <bound method InstallInterface.progressWindow of <gui.InstallInterface instance at 0xb7a3d64c>>
intf.ppw.ics.cw.id.fsset.migratedfs: 1
intf.ppw.ics.cw.id.fsset.waitWindow: <bound method InstallInterface.waitWindow of <gui.InstallInterface instance at 0xb7a3d64c>>
intf.ppw.ics.cw.id.fsset.entries: [fsentry -- device: VolGroup00 mountpoint: None
fsystem: volume group (LVM) format: 1
ismounted: 0 options: 'defaults'
bytesPerInode: 4096 label: None
, fsentry -- device: hda2 mountpoint: None
fsystem: physical volume (LVM) format: 1
ismounted: 0 options: 'defaults'
bytesPerInode: 4096 label: None
, fsentry -- device: VolGroup00/LogVol00 mountpoint: /
fsystem: ext3 format: 1
ismounted: 1 options: 'defaults'
bytesPerInode: 4096 label: None
, fsentry -- device: hda1 mountpoint: /boot
fsystem: ext3 format: 1
ismounted: 1 options: 'defaults'
bytesPerInode: 4096 label: /boot
, fsentry -- device: devpts mountpoint: /dev/pts
fsystem: devpts format: 0
ismounted: 0 options: 'gid=5,mode=620'
bytesPerInode: 4096 label: None
, fsentry -- device: shm mountpoint: /dev/shm
fsystem: tmpfs format: 0
ismounted: 0 options: 'defaults'
bytesPerInode: 4096 label: None
, fsentry -- device: proc mountpoint: /proc
fsystem: proc format: 0
ismounted: 1 options: 'defaults'
bytesPerInode: 4096 label: None
, fsentry -- device: sys mountpoint: /sys
fsystem: sysfs format: 0
ismounted: 1 options: 'defaults'
bytesPerInode: 4096 label: None
, fsentry -- device: VolGroup00/LogVol01 mountpoint: swap
fsystem: swap format: 1
ismounted: 1 options: 'defaults'
bytesPerInode: 4096 label: None
]
intf.ppw.ics.cw.id.fsset.mountcount: 5
intf.ppw.ics.cw.id.desktop: Desktop instance, containing members:
intf.ppw.ics.cw.id.desktop.info: {}
intf.ppw.ics.cw.id.desktop.runlevel: 3
intf.ppw.ics.cw.id.x_already_set: 0
intf.ppw.ics.cw.id.partitions: Partitions instance, containing members:
intf.ppw.ics.cw.id.partitions.useFdisk: 0
intf.ppw.ics.cw.id.partitions.useAutopartitioning: 1
intf.ppw.ics.cw.id.partitions.autoClearPartType: 1
intf.ppw.ics.cw.id.partitions.nextUniqueID: 11
intf.ppw.ics.cw.id.partitions.reinitializeDisks: 0
intf.ppw.ics.cw.id.partitions.autoClearPartDrives: [hda]
intf.ppw.ics.cw.id.partitions.zeroMbr: 0
intf.ppw.ics.cw.id.partitions.isKickstart: 0
intf.ppw.ics.cw.id.partitions.requests: [New Part Request -- mountpoint: /boot uniqueID: 9
type: ext3 format: 1 badblocks: None
device: hda1 drive: ['hda'] primary: None
size: 100 grow: 0 maxsize: None
start: None end: None migrate: None fslabel: None origfstype: None
bytesPerInode: 4096 options: 'None'
, LV Request -- mountpoint: / uniqueID: 8
type: ext3 format: 1 badblocks: None
size: 77920 lvname: LogVol00 volgroup: 7
bytesPerInode: 4096 options: 'None'
, VG Request -- name: VolGroup00 uniqueID: 7
format: 1 pesize: 32768
physvols: [6]
, New Part Request -- mountpoint: None uniqueID: 6
type: physical volume (LVM) format: 1 badblocks: None
device: hda2 drive: ['hda'] primary: None
size: 0 grow: 1 maxsize: None
start: None end: None migrate: None fslabel: None origfstype: None
bytesPerInode: 4096 options: 'None'
, LV Request -- mountpoint: None uniqueID: 10
type: swap format: 1 badblocks: None
size: 448 lvname: LogVol01 volgroup: 7
bytesPerInode: 4096 options: 'None'
]
intf.ppw.ics.cw.id.partitions.autoPartitionRequests: [New Part Request -- mountpoint: None uniqueID: None
type: physical volume (LVM) format: 1 badblocks: None
device: None drive: None primary: None
size: 0 grow: 1 maxsize: None
start: None end: None migrate: None fslabel: None origfstype: None
bytesPerInode: 4096 options: 'None'
, VG Request -- name: lvm uniqueID: None
format: 1 pesize: 32768
physvols: []
, LV Request -- mountpoint: / uniqueID: None
type: ext3 format: 1 badblocks: None
size: 1024 lvname: LogVol00 volgroup: lvm
bytesPerInode: 4096 options: 'None'
, New Part Request -- mountpoint: /boot uniqueID: None
type: ext3 format: 1 badblocks: None
device: None drive: None primary: None
size: 100 grow: 0 maxsize: None
start: None end: None migrate: None fslabel: None origfstype: None
bytesPerInode: 4096 options: 'None'
, LV Request -- mountpoint: None uniqueID: None
type: swap format: 1 badblocks: None
size: 224 lvname: LogVol01 volgroup: lvm
bytesPerInode: 4096 options: 'None'
]
intf.ppw.ics.cw.id.partitions.deletes: [lvname: LogVol00 vgname: VolGroup00
, vgname: VolGroup00
, drive: hda start: 208845 end: 160826714
, lvname: LogVol01 vgname: VolGroup00
, drive: hda start: 63 end: 208844
]
intf.ppw.ics.cw.id.firstboot: 0
intf.ppw.ics.cw.id.diskset: DiskSet instance, containing members:
intf.ppw.ics.cw.id.diskset.disks: {'hda': <PedDisk object at 0xb7eaf770>}
intf.ppw.ics.cw.id.diskset.onlyPrimary: None
intf.ppw.ics.cw.id.upgradeInfoFound: None
intf.ppw.ics.cw.id.zfcp: ZFCP instance, containing members:
intf.ppw.ics.cw.id.zfcp.description: zSeries machines can access industry-standard SCSI devices via Fibre Channel (FCP). You need to provide 5 parameters for each device: a 16 bit device number, a 16bit SCSI ID, a 64 bit World Wide Port Name (WWPN), a 16bit SCSI LUN and a 64 bit FCP LUN.
intf.ppw.ics.cw.id.zfcp.fcpdevices: []
intf.ppw.ics.cw.id.zfcp.options: [('Device number', 1, 'You have not specified a device number or the number is invalid', <bound method ZFCP.sanitizeDeviceInput of <zfcp.ZFCP instance at 0xb7396c2c>>, <bound method ZFCP.checkValidDevice of <zfcp.ZFCP instance at 0xb7396c2c>>), ('SCSI Id', 0, 'You have not specified a SCSI ID or the ID is invalid.', <bound method ZFCP.sanitizeHexInput of <zfcp.ZFCP instance at 0xb7396c2c>>, <bound method ZFCP.checkValidID of <zfcp.ZFCP instance at 0xb7396c2c>>), ('WWPN', 1, 'You have not specified a worldwide port name or the name is invalid.', <bound method ZFCP.sanitizeHexInput of <zfcp.ZFCP instance at 0xb7396c2c>>, <bound method ZFCP.checkValid64BitHex of <zfcp.ZFCP instance at 0xb7396c2c>>), ('SCSI LUN', 0, 'You have not specified a SCSI LUN or the number is invalid.', <bound method ZFCP.sanitizeHexInput of <zfcp.ZFCP instance at 0xb7396c2c>>, <bound method ZFCP.checkValidID of <zfcp.ZFCP instance at 0xb7396c2c>>), ('FCP LUN'!
, 1, 'You have not specified a FCP LUN or the number is invalid.', <bound method ZFCP.sanitizeFCPLInput of <zfcp.ZFCP instance at 0xb7396c2c>>, <bound method ZFCP.checkValid64BitHex of <zfcp.ZFCP instance at 0xb7396c2c>>)]
intf.ppw.ics.cw.id.grpset: None
intf.ppw.ics.cw.id.upgradeRemove: []
intf.ppw.ics.cw.id.excludeDocs: 0
intf.ppw.ics.cw.id.auth: --enableshadow --enablemd5
intf.ppw.ics.cw.id.instProgress: Already dumped
intf.ppw.ics.cw.id.dependencies: []
intf.ppw.ics.cw.id.bootloader: x86BootloaderInfo instance, containing members:
intf.ppw.ics.cw.id.bootloader.doUpgradeOnly: 0
intf.ppw.ics.cw.id.bootloader.above1024: 0
intf.ppw.ics.cw.id.bootloader.defaultDevice: mbr
intf.ppw.ics.cw.id.bootloader.pure: None
intf.ppw.ics.cw.id.bootloader.args: KernelArguments instance, containing members:
intf.ppw.ics.cw.id.bootloader.args.args:
intf.ppw.ics.cw.id.bootloader.kernelLocation: /boot/
intf.ppw.ics.cw.id.bootloader.device: hda
intf.ppw.ics.cw.id.bootloader.configfile: /etc/lilo.conf
intf.ppw.ics.cw.id.bootloader.kickstart: 0
intf.ppw.ics.cw.id.bootloader.serialOptions: None
intf.ppw.ics.cw.id.bootloader.useGrubVal: 1
intf.ppw.ics.cw.id.bootloader.serialDevice: None
intf.ppw.ics.cw.id.bootloader.images: BootImages instance, containing members:
intf.ppw.ics.cw.id.bootloader.images.default: VolGroup00/LogVol00
intf.ppw.ics.cw.id.bootloader.images.images: {'VolGroup00/LogVol00': ('linux', 'Fedora Core', 'ext3')}
intf.ppw.ics.cw.id.bootloader.drivelist: [hda]
intf.ppw.ics.cw.id.bootloader.serial: 0
intf.ppw.ics.cw.id.bootloader.forceLBA32: 0
intf.ppw.ics.cw.id.extraModules: []
intf.ppw.ics.cw.id.network: Network instance, containing members:
intf.ppw.ics.cw.id.network.hostname: localhost.localdomain
intf.ppw.ics.cw.id.network.overrideDHCPhostname: 0
intf.ppw.ics.cw.id.network.netdevices: {'eth1': DEVICE=eth1
BOOTPROTO=dhcp
HWADDR=00:08:54:28:18:90
ONBOOT=yes
, 'eth0': DEVICE=eth0
BOOTPROTO=dhcp
HWADDR=00:0D:87:A9:C3:A8
ONBOOT=no
}
intf.ppw.ics.cw.id.network.primaryNS: None
intf.ppw.ics.cw.id.network.firstnetdevice: eth0
intf.ppw.ics.cw.id.network.ternaryNS: None
intf.ppw.ics.cw.id.network.isConfigured: 0
intf.ppw.ics.cw.id.network.domains: []
intf.ppw.ics.cw.id.network.secondaryNS: None
intf.ppw.ics.cw.id.network.gateway: None
intf.ppw.ics.cw.id.instClass: InstallClass instance, containing members:
intf.ppw.ics.cw.id.floppyDevice: fd0
intf.ppw.ics.cw.id.isHeadless: 0
intf.ppw.ics.cw.id.videocard: Already dumped
intf.ppw.ics.cw.id.instLanguage: Language instance, containing members:
intf.ppw.ics.cw.id.instLanguage.info: {'LANG': en_US.UTF-8, 'SYSFONT': latarcyrheb-sun16}
intf.ppw.ics.cw.id.instLanguage.default: en_US.UTF-8
intf.ppw.ics.cw.id.instLanguage.current: en_US.UTF-8
intf.ppw.ics.cw.id.security: Security instance, containing members:
intf.ppw.ics.cw.id.security.selinux: 1
intf.ppw.ics.cw.id.upgradeSwapInfo: None
intf.ppw.ics.cw.dir: 1
intf.ppw.ics.cw.help: <TextViewBrowser object (GtkTextView) at 0xb792e694>
intf.ppw.progress: <gtk.ProgressBar object (GtkProgressBar) at 0xb4b53b44>
intf.ppw.pixmaps: []
intf.ppw.filesComplete: 0
intf.ppw.adbox: <gtk.EventBox object (GtkEventBox) at 0xb4b53b1c>
intf.ppw.numTotal: 1112
intf.ppw.initialTimeEstimate: None
intf.ppw.totalSize: 3009735
intf.ppw.remainingTimeLabel: <gtk.Label object (GtkLabel) at 0xb4b53194>
intf.ppw.numComplete: 0
intf.ppw.pkgstatus: None
intf.icw: Already dumped
intf.runres: 800x600
intf.dispatch: Already dumped
instPath: /mnt/sysimage
dispatch: Already dumped
skipSteps: {'upgradecontinue': 1, 'zfcpconfig': 2, 'findinstall': 1, 'upgrademigfind': 1, 'upgradeswapsuggestion': 1, 'confirmupgrade': 1, 'bootloaderadvanced': 1, 'upgrademount': 1, 'installtype': 2, 'upgbootloader': 1, 'addswap': 1, 'upgrademigratefs': 1, 'iscsi': 1}
method: Already dumped
step: 40
flags: Flags instance, containing members:
flags.flags: {'virtpconsole': None, 'expert': 0, 'selinux': 1, 'iscsi': 0, 'rootpath': 0, 'autostep': 0, 'setupFilesystems': 1, 'usevnc': 0, 'autoscreenshot': 0, 'test': 0, 'serial': 0, 'dmraid': 1}
firstStep: 0
id: Already dumped
dir: 1
backend: Already dumped
/tmp/syslog:
<5>Linux version 2.6.15-1.1955_FC5 (bhcompile@xxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.0 20060214 (Red Hat 4.1.0-0.27)) #1 Wed Feb 15 15:46:10 EST 2006
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000000dff0000 (usable)
<4> BIOS-e820: 000000000dff0000 - 000000000dff8000 (ACPI data)
<4> BIOS-e820: 000000000dff8000 - 000000000e000000 (ACPI NVS)
<4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<4> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
<5>0MB HIGHMEM available.
<5>223MB LOWMEM available.
<4>Using x86 segment limits to approximate NX protection
<7>On node 0 totalpages: 57328
<7> DMA zone: 4096 pages, LIFO batch:0
<7> DMA32 zone: 0 pages, LIFO batch:0
<7> Normal zone: 53232 pages, LIFO batch:15
<7> HighMem zone: 0 pages, LIFO batch:0
<6>DMI 2.3 present.
<7>ACPI: RSDP (v000 AMI ) @ 0x000fa730
<7>ACPI: RSDT (v001 AMIINT VIA_K7 0x00000010 MSFT 0x00000097) @ 0x0dff0000
<7>ACPI: FADT (v001 AMIINT VIA_K7 0x00000011 MSFT 0x00000097) @ 0x0dff0030
<7>ACPI: DSDT (v001 VIA VIA_K7 0x00001000 MSFT 0x0100000d) @ 0x00000000
<6>ACPI: PM-Timer IO Port: 0x808
<6>ACPI: Local APIC disabled (-2); pass 'lapic' to re-enable.
<4>Allocating PCI resources starting at 10000000 (gap: 0e000000:f0c00000)
<4>Built 1 zonelists
<5>Kernel command line: initrd=initrd.img BOOT_IMAGE=vmlinuz
<7>mapped APIC to ffffd000 (011c2000)
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Initializing CPU#0
<4>CPU 0 irqstacks, hard=c03c5000 soft=c03c4000
<4>PID hash table entries: 1024 (order: 10, 16384 bytes)
<4>Detected 1100.326 MHz processor.
<6>Using pmtmr for high-res timesource
<4>Console: colour VGA+ 80x25
<4>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
<4>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>Memory: 218468k/229312k available (1886k kernel code, 10180k reserved, 750k data, 168k init, 0k highmem)
<4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
<4>Calibrating delay using timer specific routine.. 2204.34 BogoMIPS (lpj=4408691)
<6>Security Framework v1.0.0 initialized
<6>SELinux: Initializing.
<6>SELinux: Starting in permissive mode
<6>selinux_register_security: Registering secondary module capability
<6>Capability LSM initialized as secondary
<4>Mount-cache hash table entries: 512
<7>CPU: After generic identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000
<7>CPU: After vendor identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 256K (64 bytes/line)
<7>CPU: After all inits, caps: 0383f1ff c1cbf9ff 00000000 00000020 00000000 00000000 00000000
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<4>CPU: AMD mobile AMD Athlon(tm) 4 stepping 02
<6>Checking 'hlt' instruction... OK.
<4>ACPI: setting ELCR to 0200 (from 8c20)
<6>checking if image is initramfs... it is
<6>Freeing initrd memory: 4932k freed
<6>NET: Registered protocol family 16
<6>ACPI: bus type pci registered
<6>PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
<6>PCI: Using configuration type 1
<6>ACPI: Subsystem revision 20060127
<6>ACPI: Interpreter enabled
<6>ACPI: Using PIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (0000:00)
<7>PCI: Probing PCI hardware (bus 00)
<4>PCI quirk: region 0800-087f claimed by vt8235 PM
<4>PCI quirk: region 0400-040f claimed by vt8235 SMB
<7>Boot video device is 0000:01:00.0
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<6>ACPI: Power Resource [URP1] (off)
<6>ACPI: Power Resource [URP2] (off)
<6>ACPI: Power Resource [FDDP] (off)
<6>ACPI: Power Resource [LPTP] (off)
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>pnp: PnP ACPI init
<6>pnp: PnP ACPI: found 10 devices
<6>usbcore: registered new driver usbfs
<6>usbcore: registered new driver hub
<6>PCI: Using ACPI for IRQ routing
<6>PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
<6>PCI: Bridge: 0000:00:01.0
<6> IO window: disabled.
<6> MEM window: dfd00000-dfefffff
<6> PREFETCH window: cfc00000-dfbfffff
<7>PCI: Setting latency timer of device 0000:00:01.0 to 64
<6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
<5>apm: overridden by ACPI.
<6>audit: initializing netlink socket (disabled)
<5>audit(1141146623.096:1): initialized
<4>Total HugeTLB memory allocated, 0
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>SELinux: Registering netfilter hooks
<6>Initializing Cryptographic API
<4>ksign: Installing public key data
<4>Loading keyring
<4>- Added public key CA7484018F37AD51
<4>- User ID: Red Hat, Inc. (Kernel Module GPG key)
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<6>ACPI: Processor [CPU1] (supports 16 throttling states)
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Real Time Clock Driver v1.12ac
<6>Linux agpgart interface v0.101 (c) Dave Jones
<6>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
<6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<4>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>VP_IDE: IDE controller at PCI slot 0000:00:11.1
<4>ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
<6>PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 15
<6>VP_IDE: chipset revision 6
<6>VP_IDE: not 100% native mode: will probe irqs later
<6>VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
<6> ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
<7>Probing IDE interface ide0...
<4>hda: HDS728080PLAT20, ATA DISK drive
<4>hdb: _NEC DVD_RW ND-3540A, ATAPI CD/DVD-ROM drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<7>Probing IDE interface ide1...
<6>hda: max request size: 512KiB
<6>hda: 160836480 sectors (82348 MB) w/1719KiB Cache, CHS=16383/255/63, UDMA(33)
<6>hda: cache flushes supported
<6> hda: hda1 hda2
<6>hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
<6>Uniform CD-ROM driver Revision: 3.20
<4>ide-floppy driver 0.99.newide
<6>usbcore: registered new driver libusual
<6>usbcore: registered new driver hiddev
<6>usbcore: registered new driver usbhid
<6>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
<6>mice: PS/2 mouse device common for all mice
<6>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: bitmap version 4.39
<6>NET: Registered protocol family 2
<6>input: AT Translated Set 2 keyboard as /class/input/input0
<4>IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
<4>TCP established hash table entries: 8192 (order: 5, 131072 bytes)
<4>TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
<6>TCP: Hash tables configured (established 8192 bind 8192)
<6>TCP reno registered
<6>TCP bic registered
<6>Initializing IPsec netlink socket
<6>NET: Registered protocol family 1
<6>NET: Registered protocol family 17
<4>Using IPI Shortcut mode
<4>ACPI wakeup devices:
<4>PCI0 USB1 USB2 USB3 EHCI UAR1 AC9 MC9 ILAN SLT1 SLT2 SLPB
<6>ACPI: (supports S0 S1 S4 S5)
<6>Freeing unused kernel memory: 168k freed
<4>Write protecting the kernel read-only data: 344k
<6>loop: loaded (max 8 devices)
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
<6>input: ImPS/2 Generic Wheel Mouse as /class/input/input1
<6>input: PC Speaker as /class/input/input2
<6>Squashfs 2.2-r2 (released 2005/09/08) (C) 2002-2005 Phillip Lougher
<5>SCSI subsystem initialized
<4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
<7>PCI: setting IRQ 5 as level-triggered
<6>ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
<6>ehci_hcd 0000:00:10.3: EHCI Host Controller
<6>ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
<6>ehci_hcd 0000:00:10.3: irq 5, io mem 0xdffffe00
<6>ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<6>usb usb1: configuration #1 chosen from 1 choice
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 6 ports detected
<6>USB Universal Host Controller Interface driver v2.3
<4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
<7>PCI: setting IRQ 11 as level-triggered
<6>ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
<6>uhci_hcd 0000:00:10.0: UHCI Host Controller
<6>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
<6>uhci_hcd 0000:00:10.0: irq 11, io base 0x0000e000
<6>usb usb2: configuration #1 chosen from 1 choice
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 2 ports detected
<4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
<7>PCI: setting IRQ 10 as level-triggered
<6>ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
<6>uhci_hcd 0000:00:10.1: UHCI Host Controller
<6>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
<6>uhci_hcd 0000:00:10.1: irq 10, io base 0x0000e400
<6>usb usb3: configuration #1 chosen from 1 choice
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 2 ports detected
<4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 15
<7>PCI: setting IRQ 15 as level-triggered
<6>ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKC] -> GSI 15 (level, low) -> IRQ 15
<6>uhci_hcd 0000:00:10.2: UHCI Host Controller
<6>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
<6>uhci_hcd 0000:00:10.2: irq 15, io base 0x0000e800
<6>usb usb4: configuration #1 chosen from 1 choice
<6>hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 2 ports detected
<6>via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
<6>ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
<6>eth0: VIA Rhine II at 0xdffffd00, 00:0d:87:a9:c3:a8, IRQ 11.
<6>eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
<6>8139too Fast Ethernet driver 0.9.27
<6>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
<6>eth1: RealTek RTL8139 at 0xce912f00, 00:08:54:28:18:90, IRQ 10
<7>eth1: Identified 8139 chip type 'RTL-8100B/8139D'
<7>ISO 9660 Extensions: Microsoft Joliet Level 3
<4>Unable to load NLS charset utf8
<4>Unable to load NLS charset utf8
<7>ISO 9660 Extensions: RRIP_1991A
<4>Unable to identify CD-ROM format.
<4>VFS: Can't find an ext2 filesystem on dev loop0.
<6>security: 3 users, 6 roles, 1132 types, 133 bools, 1 sens, 256 cats
<6>security: 55 classes, 37574 rules
<6>SELinux: Completing initialization.
<6>SELinux: Setting up existing superblocks.
<6>SELinux: initialized (dev loop0, type squashfs), not configured for labeling
<6>SELinux: initialized (dev hdb, type iso9660), uses genfs_contexts
<6>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
<6>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
<6>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
<6>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<6>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
<6>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
<6>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
<6>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
<6>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
<6>SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
<6>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
<6>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<6>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
<6>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
<6>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
<6>SELinux: initialized (dev proc, type proc), uses genfs_contexts
<6>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
<6>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
<6>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
<5>audit(1141146637.244:2): avc: denied { transition } for pid=423 comm="loader" name="bash" dev=loop0 ino=1493 scontext=system_u:system_r:kernel_t:s0 tcontext=system_u:system_r:anaconda_t:s0 tclass=process
<6>md: raid0 personality registered for level 0
<6>md: raid1 personality registered for level 1
<6>raid5: automatically using best checksumming function: pIII_sse
<4> pIII_sse : 2935.000 MB/sec
<4>raid5: using function: pIII_sse (2935.000 MB/sec)
<6>md: raid5 personality registered for level 5
<6>md: raid4 personality registered for level 4
<4>raid6: int32x1 398 MB/s
<4>raid6: int32x2 444 MB/s
<4>raid6: int32x4 419 MB/s
<4>raid6: int32x8 306 MB/s
<4>raid6: mmxx1 881 MB/s
<4>raid6: mmxx2 1504 MB/s
<4>raid6: sse1x1 820 MB/s
<4>raid6: sse1x2 1429 MB/s
<4>raid6: using algorithm sse1x2 (1429 MB/s)
<6>md: raid6 personality registered for level 6
<6>JFS: nTxBlock = 1748, nTxLock = 13990
<6>SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
<6>SGI XFS Quota Management subsystem
<6>device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@xxxxxxxxxx
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>SELinux: initialized (dev dm-0, type ext3), uses xattr
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on hda1, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>SELinux: initialized (dev hda1, type ext3), uses xattr
<6>Adding 458744k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:458744k
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on dm-0, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>SELinux: initialized (dev dm-0, type ext3), uses xattr
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on hda1, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>SELinux: initialized (dev hda1, type ext3), uses xattr
<7>ISO 9660 Extensions: Microsoft Joliet Level 3
<4>Unable to load NLS charset utf8
<4>Unable to load NLS charset utf8
<7>ISO 9660 Extensions: RRIP_1991A
<6>SELinux: initialized (dev hdb, type iso9660), uses genfs_contexts
<4>hdb: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
<4>hdb: media error (bad sector): error=0x34 { AbortedCommand LastFailedSense=0x03 }
<4>ide: failed opcode was: unknown
<4>end_request: I/O error, dev hdb, sector 3779024
<3>Buffer I/O error on device hdb, logical block 944756
/tmp/anaconda.log:
17:10:25 INFO : 223848 kB are available
17:10:25 INFO : modules to insert cramfs fat vfat sunrpc lockd nfs_acl nfs loop isofs floppy edd pcspkr squashfs
17:10:25 INFO : loaded cramfs from /modules/modules.cgz
17:10:25 INFO : loaded fat from /modules/modules.cgz
17:10:25 INFO : loaded vfat from /modules/modules.cgz
17:10:25 INFO : loaded sunrpc from /modules/modules.cgz
17:10:25 INFO : loaded lockd from /modules/modules.cgz
17:10:25 INFO : loaded nfs_acl from /modules/modules.cgz
17:10:25 INFO : loaded nfs from /modules/modules.cgz
17:10:25 INFO : loaded loop from /modules/modules.cgz
17:10:25 INFO : loaded floppy from /modules/modules.cgz
17:10:25 INFO : loaded edd from /modules/modules.cgz
17:10:25 INFO : loaded pcspkr from /modules/modules.cgz
17:10:25 INFO : loaded squashfs from /modules/modules.cgz
17:10:25 DEBUG : module(s) isofs not found
17:10:25 INFO : inserted /tmp/cramfs.ko
17:10:25 INFO : inserted /tmp/fat.ko
17:10:25 INFO : inserted /tmp/vfat.ko
17:10:25 INFO : inserted /tmp/sunrpc.ko
17:10:25 INFO : inserted /tmp/lockd.ko
17:10:26 INFO : inserted /tmp/nfs_acl.ko
17:10:26 INFO : inserted /tmp/nfs.ko
17:10:26 INFO : inserted /tmp/loop.ko
17:10:26 INFO : inserted /tmp/floppy.ko
17:10:26 INFO : inserted /tmp/edd.ko
17:10:26 INFO : inserted /tmp/pcspkr.ko
17:10:26 INFO : inserted /tmp/squashfs.ko
17:10:26 INFO : load module set done
17:10:26 INFO : modules to insert cdrom ide-cd
17:10:26 DEBUG : module(s) cdrom ide-cd not found
17:10:26 INFO : load module set done
17:10:26 INFO : modules to insert scsi_mod sd_mod sr_mod
17:10:26 INFO : loaded scsi_mod from /modules/modules.cgz
17:10:26 INFO : loaded sd_mod from /modules/modules.cgz
17:10:26 INFO : loaded sr_mod from /modules/modules.cgz
17:10:26 INFO : inserted /tmp/scsi_mod.ko
17:10:26 INFO : inserted /tmp/sd_mod.ko
17:10:26 INFO : inserted /tmp/sr_mod.ko
17:10:26 INFO : load module set done
17:10:26 INFO : looking for usb controllers
17:10:26 INFO : found USB controller ehci-hcd
17:10:26 INFO : modules to insert ehci-hcd
17:10:27 INFO : loaded ehci-hcd from /modules/modules.cgz
17:10:27 INFO : inserted /tmp/ehci-hcd.ko
17:10:27 INFO : load module set done
17:10:27 INFO : found USB controller uhci-hcd
17:10:27 INFO : modules to insert uhci-hcd
17:10:27 INFO : loaded uhci-hcd from /modules/modules.cgz
17:10:27 INFO : inserted /tmp/uhci-hcd.ko
17:10:27 INFO : load module set done
17:10:27 INFO : found USB controller uhci-hcd
17:10:27 INFO : modules to insert
17:10:27 INFO : load module set done
17:10:27 INFO : found USB controller uhci-hcd
17:10:27 INFO : modules to insert
17:10:27 INFO : load module set done
17:10:27 DEBUG : waiting for usb to become stable...
17:10:29 DEBUG : 2 seconds.
17:10:29 INFO : modules to insert hid keybdev
17:10:29 DEBUG : module(s) hid keybdev not found
17:10:29 INFO : load module set done
17:10:30 INFO : no firewire controller found
17:10:30 DEBUG : no pcic controller found
17:10:30 DEBUG : probing buses
17:10:30 DEBUG : finished bus probing
17:10:30 DEBUG : ignoring driverless device VIA Technologies, Inc. Unknown device 3177
17:10:30 DEBUG : ignoring driverless device VIA Technologies, Inc. Unknown device b091
17:10:30 DEBUG : ignoring driverless device VIA Technologies, Inc. Unknown device 3116
17:10:30 DEBUG : ignoring driverless device VIA Technologies, Inc. Unknown device 3059
17:10:30 DEBUG : ignoring driverless device VIA Technologies, Inc. Unknown device 3068
17:10:30 DEBUG : ignoring driverless device S3 Inc. Unknown device 8d04
17:10:30 DEBUG : ignoring driverless device VIA Technologies, Inc. Unknown device 0571
17:10:30 INFO : modules to insert mii via-rhine 8139too
17:10:31 INFO : loaded mii from /modules/modules.cgz
17:10:31 INFO : loaded via-rhine from /modules/modules.cgz
17:10:31 INFO : loaded 8139too from /modules/modules.cgz
17:10:31 INFO : inserted /tmp/mii.ko
17:10:31 INFO : inserted /tmp/via-rhine.ko
17:10:31 INFO : inserted /tmp/8139too.ko
17:10:31 INFO : load module set done
17:10:31 INFO : trying to mount CD device hdb
17:10:32 INFO : mntloop loop0 on /mnt/runtime as /mnt/source/Fedora/base/stage2.img fd is 15
17:10:32 DEBUG : MD5SUM -> 51ac7180d93a2ab67cb55b26f35dcf92
17:10:32 DEBUG : skipsectors = 15
17:10:32 INFO : supported = 0
17:10:35 INFO : Loading SELinux policy
17:10:37 INFO : getting ready to spawn shell now
17:10:37 INFO : modules to insert cdrom ide-cd
17:10:37 DEBUG : module(s) cdrom ide-cd not found
17:10:37 INFO : load module set done
17:10:37 INFO : modules to insert
17:10:37 INFO : load module set done
17:10:37 DEBUG : probing buses
17:10:38 DEBUG : finished bus probing
17:10:38 DEBUG : ignoring driverless device VIA Technologies, Inc. VT8235 ISA Bridge
17:10:38 DEBUG : ignoring driverless device VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP]
17:10:38 DEBUG : ignoring driverless device VIA Technologies, Inc. VT8375 [KM266/KL266] Host Bridge
17:10:38 DEBUG : ignoring driverless device VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller
17:10:38 DEBUG : ignoring driverless device VIA Technologies, Inc. AC'97 Modem Controller
17:10:38 DEBUG : ignoring driverless device S3 Inc. VT8375 [ProSavage8 KM266/KL266]
17:10:38 DEBUG : ignoring driverless device VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE
17:10:38 INFO : modules to insert
17:10:38 INFO : load module set done
17:10:38 INFO : modules to insert md raid0 raid1 xor raid5 raid6 msdos jbd ext3 reiserfs jfs exportfs xfs dm-mod dm-zero dm-mirror dm-snapshot
17:10:38 INFO : loaded raid0 from /modules/modules.cgz
17:10:38 INFO : loaded raid1 from /modules/modules.cgz
17:10:38 INFO : loaded xor from /modules/modules.cgz
17:10:38 INFO : loaded raid5 from /modules/modules.cgz
17:10:38 INFO : loaded raid6 from /modules/modules.cgz
17:10:38 INFO : loaded msdos from /modules/modules.cgz
17:10:38 INFO : loaded jbd from /modules/modules.cgz
17:10:38 INFO : loaded ext3 from /modules/modules.cgz
17:10:38 INFO : loaded reiserfs from /modules/modules.cgz
17:10:38 INFO : loaded jfs from /modules/modules.cgz
17:10:38 INFO : loaded exportfs from /modules/modules.cgz
17:10:38 INFO : loaded xfs from /modules/modules.cgz
17:10:38 INFO : loaded dm-mod from /modules/modules.cgz
17:10:38 INFO : loaded dm-zero from /modules/modules.cgz
17:10:38 INFO : loaded dm-mirror from /modules/modules.cgz
17:10:38 INFO : loaded dm-snapshot from /modules/modules.cgz
17:10:38 DEBUG : module(s) md not found
17:10:38 INFO : inserted /tmp/raid0.ko
17:10:38 INFO : inserted /tmp/raid1.ko
17:10:38 INFO : inserted /tmp/xor.ko
17:10:38 INFO : inserted /tmp/raid5.ko
17:10:38 INFO : inserted /tmp/raid6.ko
17:10:38 INFO : inserted /tmp/msdos.ko
17:10:38 INFO : inserted /tmp/jbd.ko
17:10:39 INFO : inserted /tmp/ext3.ko
17:10:39 INFO : inserted /tmp/reiserfs.ko
17:10:39 INFO : inserted /tmp/jfs.ko
17:10:39 INFO : inserted /tmp/exportfs.ko
17:10:39 INFO : inserted /tmp/xfs.ko
17:10:39 INFO : inserted /tmp/dm-mod.ko
17:10:39 INFO : inserted /tmp/dm-zero.ko
17:10:39 INFO : inserted /tmp/dm-mirror.ko
17:10:39 INFO : inserted /tmp/dm-snapshot.ko
17:10:39 INFO : load module set done
17:10:39 INFO : looking for USB mouse...
17:10:39 INFO : Running anaconda script /usr/bin/anaconda
17:10:51 INFO : Display mode = g
17:10:51 INFO : Method = cdrom://hdb:/mnt/source
17:10:51 INFO : _Fedora is only installclass, using it
17:11:17 INFO : Started mini-wm
17:11:17 INFO : Starting graphical installation...
17:11:21 INFO : anaconda floppy device fd0
17:11:22 INFO : Detected 224M of memory
17:11:22 INFO : Swap attempt of 224M to 448M
17:11:22 WARNING : step partitionmethod does not exist
17:11:22 WARNING : step partitionmethodsetup does not exist
17:11:22 WARNING : step autopartition does not exist
17:11:22 WARNING : step readcomps does not exist
17:11:22 WARNING : step selectlangpackages does not exist
17:11:22 WARNING : step handleX11pkgs does not exist
17:11:22 WARNING : step handlemiscpkgs does not exist
17:11:22 WARNING : step fixupconditionals does not exist
17:11:25 INFO : moving (1) to step welcome
17:11:29 INFO : moving (1) to step betanag
17:11:33 INFO : moving (1) to step language
17:11:38 INFO : moving (1) to step keyboard
17:11:41 INFO : moving (1) to step findrootparts
17:11:41 DEBUG : starting dmraids
17:11:41 DEBUG : self.driveList(): ['hda']
17:11:41 DEBUG : DiskSet.skippedDisks: []
17:11:41 DEBUG : DiskSet.skippedDisks: []
17:11:41 DEBUG : starting all dmraids on drives ['hda']
17:11:41 DEBUG : scanning for dmraid on drives ['hda']
17:11:41 DEBUG : done starting dmraids. Drivelist:
17:11:41 DEBUG : hda
17:11:43 INFO : lv is VolGroup00/LogVol00, size of 77920
17:11:43 INFO : lv is VolGroup00/LogVol01, size of 448
17:11:43 DEBUG : isys.py:mount()- going to mount /dev/VolGroup00/LogVol00 on /mnt/sysimage
17:11:43 DEBUG : isys.py:mount()- going to mount /tmp/hda1 on /mnt/sysimage
17:11:44 INFO : moving (1) to step partitionobjinit
17:11:45 DEBUG : self.driveList(): ['hda']
17:11:45 DEBUG : DiskSet.skippedDisks: []
17:11:45 DEBUG : DiskSet.skippedDisks: []
17:11:46 INFO : pv is /dev/hda2 in vg VolGroup00, size is 78426
17:11:46 INFO : vg VolGroup00, size is 78400, pesize is 32768
17:11:46 INFO : lv is VolGroup00/LogVol00, size of 77920
17:11:46 INFO : lv is VolGroup00/LogVol01, size of 448
17:11:46 INFO : moving (1) to step parttype
17:11:53 INFO : moving (1) to step autopartitionexecute
17:11:54 DEBUG : used space is 1248
17:11:54 DEBUG : actual space is 78368
17:11:54 DEBUG : used space is 64512
17:11:54 DEBUG : actual space is 78368
17:11:54 DEBUG : used space is 64736
17:11:54 DEBUG : actual space is 78368
17:11:54 DEBUG : used space is 78368
17:11:54 DEBUG : actual space is 78368
17:11:54 DEBUG : used space is 78368
17:11:54 DEBUG : actual space is 78368
17:11:54 DEBUG : used space is 78368
17:11:54 DEBUG : actual space is 78368
17:11:54 INFO : moving (1) to step partition
17:11:59 INFO : moving (1) to step partitiondone
17:11:59 INFO : moving (1) to step bootloadersetup
17:11:59 INFO : moving (1) to step bootloader
17:12:03 INFO : moving (1) to step networkdevicecheck
17:12:03 INFO : moving (1) to step network
17:12:15 INFO : moving (1) to step timezone
17:12:29 INFO : moving (1) to step accounts
17:12:41 INFO : moving (1) to step reposetup
17:12:46 INFO : primary sqlite cache needs updating, reading in metadata
17:13:08 INFO : Added 2205 new packages, deleted 0 old in 21.28 seconds
17:13:09 INFO : moving (1) to step basepkgsel
17:13:10 INFO : moving (1) to step tasksel
17:13:18 INFO : moving (1) to step group-selection
17:13:22 WARNING : /usr/lib/python2.4/site-packages/pirut/GroupSelector.py:318: GtkWarning: gtk_tree_view_scroll_to_point: assertion `GTK_WIDGET_REALIZED (tree_view)' failed
tree.scroll_to_point(0, 0)
17:14:37 INFO : moving (1) to step postselection
17:14:37 INFO : selected kernel package for kernel
17:14:37 DEBUG : selecting kernel-devel
17:14:37 DEBUG : no such package kernel-devel
17:15:00 DEBUG : ignoring libtermcap>bash in whiteout
17:15:01 DEBUG : ignoring initscripts>kernel in whiteout
17:15:04 DEBUG : ignoring gimp>gimp-print-plugin in whiteout
17:15:04 DEBUG : ignoring gimp>gimp-print-plugin in whiteout
17:15:04 DEBUG : ignoring gimp>gimp-print-plugin in whiteout
17:15:04 DEBUG : ignoring gimp>gimp-print-plugin in whiteout
17:15:04 DEBUG : ignoring gimp>gimp-print-plugin in whiteout
17:15:04 DEBUG : ignoring gimp>gimp-print-plugin in whiteout
17:15:04 DEBUG : ignoring gimp>gimp-print-plugin in whiteout
17:15:07 DEBUG : ignoring aspell>aspell-en in whiteout
17:15:59 DEBUG : ignoring perl>mod_perl in whiteout
17:15:59 DEBUG : ignoring perl>mod_perl in whiteout
17:15:59 DEBUG : ignoring perl>mod_perl in whiteout
17:15:59 DEBUG : ignoring perl>mod_perl in whiteout
17:15:59 DEBUG : ignoring perl>mod_perl in whiteout
17:15:59 DEBUG : ignoring perl>mod_perl in whiteout
17:15:59 DEBUG : ignoring perl>mod_perl in whiteout
17:15:59 DEBUG : ignoring perl>mod_perl in whiteout
17:15:59 DEBUG : ignoring perl>mod_perl in whiteout
17:15:59 DEBUG : ignoring perl>mod_perl in whiteout
17:15:59 DEBUG : ignoring perl>mod_perl in whiteout
17:15:59 DEBUG : ignoring perl>mod_perl in whiteout
17:15:59 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:00 DEBUG : ignoring perl>mod_perl in whiteout
17:16:08 DEBUG : ignoring ghostscript-fonts>ghostscript in whiteout
17:16:08 DEBUG : ignoring mysql>perl-DBD-MySQL in whiteout
17:16:25 DEBUG : ignoring coreutils>pam in whiteout
17:16:33 DEBUG : ignoring dbus>dbus-glib in whiteout
17:16:33 DEBUG : ignoring dbus>dbus-glib in whiteout
17:16:37 DEBUG : ignoring gstreamer-tools>gstreamer in whiteout
17:16:37 DEBUG : ignoring openjade>docbook-dtds in whiteout
17:16:39 DEBUG : ignoring nautilus>nautilus-cd-burner in whiteout
17:16:51 DEBUG : ignoring ghostscript>gimp-print in whiteout
17:17:00 DEBUG : ignoring ypbind>yp-tools in whiteout
17:17:01 DEBUG : ignoring php>php-pear in whiteout
17:17:06 DEBUG : ignoring gnome-python2>gnome-python2-bonobo in whiteout
17:17:15 DEBUG : ignoring gtk+>gdk-pixbuf in whiteout
17:17:15 DEBUG : ignoring gtk+>gdk-pixbuf in whiteout
17:17:21 INFO : moving (1) to step confirminstall
17:18:36 INFO : moving (1) to step install
17:18:36 INFO : moving (1) to step enablefilesystems
17:18:40 INFO : lv is VolGroup00/LogVol00, size of 77920
17:18:40 INFO : lv is VolGroup00/LogVol01, size of 448
17:18:40 INFO : removing lv LogVol00
17:18:40 INFO : removing lv LogVol01
17:18:40 INFO : pv is /dev/hda2 in vg VolGroup00, size is 78426
17:18:41 INFO : lvm vgremove VolGroup00
17:18:41 INFO : lvm pvremove -ff /dev/hda2
17:18:41 INFO : lvm pvcreate -ff -y -v /dev/hda2
17:18:42 INFO : formatting swap as swap
17:18:43 INFO : formatting None as volume group (LVM)
17:18:43 INFO : formatting None as physical volume (LVM)
17:18:43 INFO : formatting / as ext3
17:18:43 INFO : Format command: ['/usr/sbin/mke2fs', '/dev/VolGroup00/LogVol00', '-i', '4096', '-j']
17:20:32 INFO : formatting /boot as ext3
17:20:33 INFO : Format command: ['/usr/sbin/mke2fs', '/tmp/hda1', '-i', '4096', '-j']
17:20:38 DEBUG : error reading swap label on /dev/VolGroup00: [Errno 21] Is a directory
17:20:38 DEBUG : error reading xfs label on /dev/VolGroup00: [Errno 21] Is a directory
17:20:38 DEBUG : error reading jfs label on /dev/VolGroup00: [Errno 21] Is a directory
17:20:38 DEBUG : error reading reiserfs label on /dev/VolGroup00: [Errno 21] Is a directory
17:20:40 INFO : trying to mount VolGroup00/LogVol00 on /
17:20:40 DEBUG : isys.py:mount()- going to mount /dev/VolGroup00/LogVol00 on /mnt/sysimage
17:20:40 INFO : trying to mount hda1 on /boot
17:20:40 DEBUG : isys.py:mount()- going to mount /tmp/hda1 on /mnt/sysimage/boot
17:20:40 INFO : trying to mount proc on /proc
17:20:40 DEBUG : isys.py:mount()- going to mount proc on /mnt/sysimage/proc
17:20:40 INFO : trying to mount sys on /sys
17:20:40 DEBUG : isys.py:mount()- going to mount sys on /mnt/sysimage/sys
17:20:40 INFO : moving (1) to step migratefilesystems
17:20:40 INFO : moving (1) to step setuptime
17:20:41 INFO : moving (1) to step preinstallconfig
17:20:49 DEBUG : isys.py:mount()- going to mount /selinux on /mnt/sysimage/selinux
17:20:49 WARNING : no dev package, going to bind mount /dev
17:20:49 DEBUG : isys.py:mount()- going to mount /dev on /mnt/sysimage/dev
17:20:49 INFO : moving (1) to step installpackages
17:20:49 INFO : Preparing to install packages
17:20:49 INFO : switching from CD [1, 2, 3, 4, 5] to 1 for
17:20:50 DEBUG : isys.py:mount()- going to mount /tmp/hdb on /mnt/source
/tmp/lvmout:
Finding all logical volumes
group "VolGroup00" now active
cache
Finding all volume groups
Finding volume group "VolGroup00"
Reading all physical volumes. This may take a while...
Found volume group "VolGroup00" using metadata type lvm2
p "VolGroup00" successfully created
directory "/etc/lvm/backup"
Creating volume group backup "/etc/lvm/backup/VolGroup00" (seqno 3).
Reading all physical volumes. This may take a while...
Found volume group "VolGroup00" using metadata type lvm2
/mnt/sysimage/root/install.log:
-- fedora-test-list mailing list fedora-test-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-test-list