I have noticed some glitches in the sky2 network driver... It has stopped twice without much load at all, and the second time I had a chance to look at dmesg and read the error messages. NETDEV WATCHDOG: eth0: transmit timed out sky2 eth0: tx timeout NETDEV WATCHDOG: eth0: transmit timed out sky2 transmit interrupt missed? recovered NETDEV WATCHDOG: eth0: transmit timed out sky2 eth0: tx timeout NETDEV WATCHDOG: eth0: transmit timed out sky2 transmit interrupt missed? recovered ..... NETDEV WATCHDOG: eth0: transmit timed out sky2 eth0: tx timeout (network is dead, but mii-tool show link ok) After 20-30 messages like this, the driver doesn't work anymore.... and I have to reload the module to make the network traffic start again. I'm running kernel 2.6.15-1.1917_FC5 and the card is a: 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 19) 02:00.0 0200: 11ab:4362 (rev 19) Are there more people how has seen this problem? /Christian -- fedora-test-list mailing list fedora-test-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-test-list