Re: udev on FC5t2

"Aryanto Rachmad" <aryanto.rachmad@xxxxxxxxx> · Mon, 13 Feb 2006 08:43:51 +0100

Hello again,

I forgot to mention the way I used to 
upgrade from FC4 to FC5t2. I did the following:

wget http://download.fedora.redhat.com/pub/fedora/linux/core/test/4.91/i386/os/Fedora/RPMS/fedora-release-4.91-1.noarch.rpm
rpm -Uvh 
fedora-release-4.91-1.noarch.rpm
yum update

I hope that would not cause any problems, 
especially the udev problem I am currently having.

Cheers,

Anto

  ----- Original Message ----- 
  From: 
  Aryanto Rachmad 
  To: fedora-test-list@xxxxxxxxxx 

  Sent: Monday, February 13, 2006 7:57 
  AM
  Subject: udev on FC5t2

  Hello All,

  I upgraded the OS of my IBM xSeries 330 
  from 2.6.15-1.1831_FC4-smp-i686 to 2.6.15-1.1928_FC5-smp-i686 due to the 
  trouble I had getting MySQL 5.0 running on FC4. But now I have a little bit 
  problem with udev.

  I am running asterisk PBX on this 
  server with TDM400P PCI card, called zaptel device. Now in FC5t2, 
  asterisk can not run automatically after reboot due to it can not load this 
  zaptel device. I have to do the following before starting asterisk 
  manually:

  chown -R asterisk:asterisk 
  /dev/zap
  chown asterisk /dev/tty9

  In FC4, I have the following set on 
  zaptel.rules under /etc/udev/rules.d:

  KERNEL="zapctl",     
  NAME="zap/ctl", OWNER="asterisk", GROUP="asterisk", 
  MODE="0660"
KERNEL="zaptimer",   NAME="zap/timer", 
  OWNER="asterisk", GROUP="asterisk", MODE="0660"
KERNEL="zapchannel", 
  NAME="zap/channel", OWNER="asterisk", GROUP="asterisk", 
  MODE="0660"
KERNEL="zappseudo",  NAME="zap/pseudo", OWNER="asterisk", 
  GROUP="asterisk", MODE="0660"
KERNEL="zap[0-9]*",  NAME="zap/%n", 
  OWNER="asterisk", GROUP="asterisk", MODE="0660"
KERNEL="tty9",  
       OWNER="asterisk"

  That setting is the same in FC5t2, but 
  the /etc/udev/udev.conf in FC5t2 only contains:

  udev_log="err"

  While in FC4 it contains:

  udev_root="/dev"
  udev_db="/dev/.udevdb"
  udev_rules="/etc/udev/rules.d"
  udev_log="err"

  I am not sure if I can use the same 
  setting in FC5t2.

  Do you have any suggestion?

  Thanks a lot in advance for your 
  help.

  Cheers,

  Anto
  ----

-- 
fedora-test-list mailing 
  list
fedora-test-list@xxxxxxxxxx
To unsubscribe: 

https://www.redhat.com/mailman/listinfo/fedora-test-list
-- 
fedora-test-list mailing list
fedora-test-list@xxxxxxxxxx
To unsubscribe: 
https://www.redhat.com/mailman/listinfo/fedora-test-list