I tried both 'tiacx111.bin' and TIACX111.BIN in /lib/firmware. Neither
works.
From: John Summerfied <debian@xxxxxxxxxxxxxxxxxxxxxx>
Reply-To: For testers of Fedora Core development releases
<fedora-test-list@xxxxxxxxxx>
To: For testers of Fedora Core development releases
<fedora-test-list@xxxxxxxxxx>
Subject: Re: ACX100 -acx.ko module for TI ACX111 chipsets
Date: Mon, 12 Dec 2005 12:04:43 +0800
Don Springall wrote:
I am trying to get the acx module to work for my linksys WPC54G v2
wireless card working. The module is currently in the MM tree only. It
cannot seem to find the firmware. I stuck the firmware in as
/lib/firmware/TIACX111.BIN but I still get this in dmesg:
acx: found ACX111-based wireless network card at 0000:07:00.0, irq:10,
phymem1:0x28020000, phymem2:0x28000000, mem1:0xd087c000, mem1_size:8192,
mem2:0xd0940000, mem2_size:131072
initial debug setting is 0x000A
using IRQ 10
requesting firmware image 'tiacx111c16'
acx: firmware image 'tiacx111c16' was not provided. Check your hotplug
scripts
requesting firmware image 'tiacx111'
acx: firmware image 'tiacx111' was not provided. Check your hotplug
scripts
acx: reset_dev() FAILED
ACPI: PCI interrupt for device 0000:07:00.0 disabled
acx_pci: probe of 0000:07:00.0 failed with error -5
ndiswrapper uses the firmware from linksys which is
/lib/firmware/FwRad17.bin and /lib/firmware/FwRad16.bin
Does anyone have any experience getting this to work ?
case matters. Try renameing the file to 'tiacx111' or 'tiacx111.bin'
--
Cheers
John
--
fedora-test-list mailing list
fedora-test-list@xxxxxxxxxx
To unsubscribe:
https://www.redhat.com/mailman/listinfo/fedora-test-list