On Wed, 23 Nov 2005 15:06:49 -0500, Dave Jones wrote: > On Wed, Nov 23, 2005 at 06:21:50AM -0700, Paul Dickson wrote: > > I currently using the 2.6.14-1.1696_FC5 kernel on my notebook. My hard > > drive is on /dev/sda and lspci says: > > > > 00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03) > > > > Currently, my DVD/CD-RW drive appears as /dev/hdc. It has no DMA > > support. Thus, if I use xine to play a DVD with the processor running > > full out (1.6GHz), it jumps and studders much worse than my 6 year old > > notebook (300MHz, PII). > > SATA ATAPI is enabled in the current builds, they may not have gone > out to rawhide yet due to the test1 freeze. You can grab them early > at http://people.redhat.com/davej/kernels/Fedora/devel/ According to the rawhide report that was sent out after my message but before your's, it was enabled in 1707, which I yum-updated to. I was able to get the DVD/CD-RW to appear on /dev/scd0 after booting with the "hdc=none" option. DMA appears to be working too. Thank you for your work and your reply. -Paul -- fedora-test-list mailing list fedora-test-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-test-list