On 11/12/2005 05:56:38 PM, Jeff Spaleta wrote:
My rawhide box is rawhide synced as of today running
kernel-smp-2.6.14-1.1663_FC5
udev-075-1
hal-0.5.4.cvs20051111-1
and I'm not able to get a single one of my usb storage devices to be
correctly recognized.
compact flash card reader, ipod g4, usb flashdrive, usb harddrive
enclosure.. none of them actually result in a /dev/sdX listing being
produced
All these devices work on an fc4 box with the latest fc4 kernel update.
These were working on rawhide within the last month, I can't give you
an exact date when they stopped working.
here's na example of what happens when i power up the usb harddrive
enclosure on the rawhide box:
/sbin/lsusb shows:
Bus 001 Device 006: ID 04b4:6830 Cypress Semiconductor Corp. USB-2.0 IDE
Adapter
but I don't get a /dev/sda1 as I expect
/var/log/messages gets this when the device is plugged in:
Nov 12 17:49:13 goober kernel: usb 1-2: new high speed USB device
using ehci_hcd and address 6
Nov 12 17:49:13 goober kernel: HFC-S USB: probing interface(0)
actalt(0) minor(0)
Nov 12 17:49:13 goober kernel: HFC-S USB: no valid vendor found in USB
descriptor
Nov 12 17:49:13 goober kernel: hfc_usb: probe of 1-2:1.0 failed with error
-5
I experience the same problem with my Sandisk USB stick. The "no valid vendor"
message is suspect, as with lsusb -v I can see it knows very well what the
vendor id+name are.
Interestingly, I have a USB connected tape drive that also claims to be of
mass storage class and it works fine.
Go figure. Willem Riede.
--
fedora-test-list mailing list
fedora-test-list@xxxxxxxxxx
To unsubscribe:
https://www.redhat.com/mailman/listinfo/fedora-test-list