I see this in the last few kernel versions on my system, there is either
a warning or a bug/error with regards to my APIC.
Here is my latest dmesg (and sorry if so long,but wasn't sure what would
need to be seen out of it). Half way down the dmesg, outlined in ***'s
is the error/bug/warning that I am seeing and asking about....
Linux version 2.6.13-1.1622_FC5 (bhcompile@xxxxxxxxxxxxxxxxxxxxxxxxxxx)
(gcc version 4.0.2 20051007 (Red Hat 4.0.2-3)) #1 Sat Oct 22 00:36:45
EDT 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
found SMP MP-table at 000f5250
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 131056
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126960 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 AWARD ) @ 0x000f6cf0
ACPI: RSDT (v001 AWARD AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x1fff3040
ACPI: FADT (v001 AWARD AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x1fff30c0
ACPI: MADT (v001 AWARD AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x1fff6c40
ACPI: DSDT (v001 AWARD AWRDACPI 0x00001000 MSFT 0x0100000e) @
0x00000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: Skipping IOAPIC probe due to 'noapic' option.
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
I/O APIC #2 Version 17 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 1
Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
Built 1 zonelists
Kernel command line: ro root=LABEL=/ rhgb quiet
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
CPU 0 irqstacks, hard=c0434000 soft=c0433000
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 2806.979 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 514440k/524224k available (2261k kernel code, 9120k reserved,
793k data, 196k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode...
Ok.
Calibrating delay using timer specific routine.. 5620.05 BogoMIPS
(lpj=11240108)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
0000441d 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
0000441d 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000080 0000441d
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
mtrr: v2.0 (20020519)
CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0e28)
****************************************************
BIOS bug, local APIC #0 not detected!...
****************************************************
checking if image is initramfs... it is
Freeing initrd memory: 516k freed
softlockup thread 0 started up.
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfbbf0, last bus=1
PCI: Using configuration type 1
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.5
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
PCI: Bridge: 0000:00:01.0
IO window: d000-dfff
MEM window: e8000000-e80fffff
PREFETCH window: d8000000-e7ffffff
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1130055129.536:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key ED8D7411FD8C7595
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Fan [FAN] (on)
ACPI: CPU0 (power states: C1[C1])
ACPI: Thermal Zone [THRM] (65 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected SiS 661 chipset
agpgart: AGP aperture is 128M @ 0xd0000000
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 32 ports, IRQ sharing
enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:02.5[A] -> Link [LNKA] -> GSI 10 (level,
low) -> IRQ 10
SIS5513: chipset revision 1
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: WDC WD400BB-00JHA0, ATA DISK drive
hdb: WDC WD800JB-00JJC0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: LITE-ON LTR-52327S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63,
UDMA(100)
hda: cache flushes supported
hda: hda1 hda2
hdb: max request size: 128KiB
hdb: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63,
UDMA(100)
hdb: cache flushes supported
hdb: hdb1 hdb2 hdb3
hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 3.39
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard on isa0060/serio0
IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
TCP established hash table entries: 32768 (order: 7, 524288 bytes)
TCP bind hash table entries: 32768 (order: 7, 655360 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP reno registered
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
ACPI wakeup devices:
PCI0 USB0 USB1 USB2 USB3 MAC0 AMR0 UAR1 PS2M PS2K
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 196k freed
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
security: 3 users, 6 roles, 1018 types, 107 bools, 1 sens, 256 cats
security: 55 classes, 15538 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev hdb1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses
genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses
genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses
genfs_contexts
SELinux: initialized (dev inotifyfs, type inotifyfs), uses
genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
cdrom: open failed.
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
sis900.c: v1.08.08 Jan. 22 2005
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKD] -> GSI 11 (level,
low) -> IRQ 11
0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
0000:00:04.0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0xe200, IRQ 11, 00:11:09:c0:aa:3a.
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNKB] -> GSI 3 (level, low)
-> IRQ 3
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:02.7[C] -> Link [LNKC] -> GSI 5 (level, low)
-> IRQ 5
intel8x0_measure_ac97_clock: measured 54812 usecs
intel8x0: clocking to 48000
gameport: EMU10K1 is pci0000:00:06.1/gameport0, io 0xe400, speed 1104kHz
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:00:03.3[D] -> Link [LNKH] -> GSI 9 (level, low)
-> IRQ 9
ehci_hcd 0000:00:03.3: EHCI Host Controller
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:03.3: irq 9, io mem 0xe8131000
PCI: cache line size of 128 is not supported by device 0000:00:03.3
ehci_hcd 0000:00:03.3: USB 2.0 initialized, EHCI 1.00, driver 10 Dec
2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver
(PCI)
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5
ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKE] -> GSI 5 (level, low)
-> IRQ 5
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.0: irq 5, io mem 0xe8133000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:03.1[B] -> Link [LNKF] -> GSI 10 (level,
low) -> IRQ 10
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.1: irq 10, io mem 0xe8134000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:03.2[C] -> Link [LNKG] -> GSI 11 (level,
low) -> IRQ 11
ohci_hcd 0000:00:03.2: OHCI Host Controller
ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:03.2: irq 11, io mem 0xe8130000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 3-3: new full speed USB device using ohci_hcd and address 2
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03af0c0(lo)
IPv6 over IPv4 tunneling driver
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ibm_acpi: ec object not found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@xxxxxxxxxx
cdrom: open failed.
EXT3 FS on hdb1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hda2, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hdb2, type ext3), uses xattr
Adding 1020116k swap on /dev/hdb3. Priority:-1 extents:1
across:1020116k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses
genfs_contexts
eth0: Media Link On 100mbps full-duplex
lp0: using parport0 (interrupt-driven).
lp0: console ready
eth0: no IPv6 routers present
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses
genfs_contexts
SELinux: initialized (dev 0:15, type nfs), uses genfs_contexts
SELinux: initialized (dev 0:16, type nfs), uses genfs_contexts
[root@scrappy ~]# lspci
00:00.0 Host bridge: Silicon Integrated Systems [SiS]
661FX/M661FX/M661MX Host (rev 11)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS AGP Port
(virtual PCI-to-PCI bridge)
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS964 [MuTIOL
Media IO] (rev 36)
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev
01)
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS]
Sound Controller (rev a0)
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
Controller (rev 0f)
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
Controller (rev 0f)
00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
Controller (rev 0f)
00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0
Controller
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI
Fast Ethernet (rev 90)
00:06.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev
07)
00:06.1 Input device controller: Creative Labs SB Live! MIDI/Game Port
(rev 07)
00:08.0 Communication controller: Conexant HSF 56k HSFi Modem (rev 01)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV250 If
[Radeon 9000] (rev 01)
01:00.1 Display controller: ATI Technologies Inc Radeon RV250 [Radeon
9000] (Secondary) (rev 01)
[root@scrappy proc]# more pci
PCI devices found:
Bus 0, device 0, function 0:
Class 0600: PCI device 1039:0661 (rev 17).
Master Capable. Latency=32.
Non-prefetchable 32 bit memory at 0xd0000000 [0xd7ffffff].
Bus 0, device 1, function 0:
Class 0604: PCI device 1039:0003 (rev 0).
Master Capable. Latency=64. Min Gnt=14.
Bus 0, device 2, function 0:
Class 0601: PCI device 1039:0964 (rev 54).
Bus 0, device 2, function 5:
Class 0101: PCI device 1039:5513 (rev 1).
IRQ 10.
Master Capable. Latency=128.
I/O at 0x4000 [0x400f].
Bus 0, device 2, function 7:
Class 0401: PCI device 1039:7012 (rev 160).
IRQ 5.
Master Capable. Latency=32. Min Gnt=52.Max Lat=11.
I/O at 0xe000 [0xe0ff].
I/O at 0xe100 [0xe17f].
Bus 0, device 3, function 0:
Class 0c03: PCI device 1039:7001 (rev 15).
IRQ 5.
Master Capable. Latency=32. Max Lat=80.
Non-prefetchable 32 bit memory at 0xe8133000 [0xe8133fff].
Bus 0, device 3, function 1:
Class 0c03: PCI device 1039:7001 (rev 15).
IRQ 10.
Master Capable. Latency=32. Max Lat=80.
Non-prefetchable 32 bit memory at 0xe8134000 [0xe8134fff].
Bus 0, device 3, function 2:
Class 0c03: PCI device 1039:7001 (rev 15).
IRQ 11.
Master Capable. Latency=32. Max Lat=80.
Non-prefetchable 32 bit memory at 0xe8130000 [0xe8130fff].
Bus 0, device 3, function 3:
Class 0c03: PCI device 1039:7002 (rev 0).
IRQ 9.
Master Capable. Latency=32. Max Lat=80.
Non-prefetchable 32 bit memory at 0xe8131000 [0xe8131fff].
Bus 0, device 4, function 0:
Class 0200: PCI device 1039:0900 (rev 144).
IRQ 11.
Master Capable. Latency=32. Min Gnt=52.Max Lat=11.
I/O at 0xe200 [0xe2ff].
Non-prefetchable 32 bit memory at 0xe8132000 [0xe8132fff].
Bus 0, device 6, function 0:
Class 0401: PCI device 1102:0002 (rev 7).
IRQ 3.
Master Capable. Latency=32. Min Gnt=2.Max Lat=20.
I/O at 0xe300 [0xe31f].
Bus 0, device 6, function 1:
Class 0980: PCI device 1102:7002 (rev 7).
Master Capable. Latency=32.
I/O at 0xe400 [0xe407].
Bus 0, device 8, function 0:
Class 0780: PCI device 14f1:2f00 (rev 1).
IRQ 11.
Master Capable. Latency=32.
Non-prefetchable 32 bit memory at 0xe8120000 [0xe812ffff].
I/O at 0xe500 [0xe507].
Bus 1, device 0, function 0:
Class 0300: PCI device 1002:4966 (rev 1).
IRQ 10.
Master Capable. Latency=32. Min Gnt=8.
Prefetchable 32 bit memory at 0xd8000000 [0xdfffffff].
I/O at 0xd000 [0xd0ff].
Non-prefetchable 32 bit memory at 0xe8030000 [0xe803ffff].
Bus 1, device 0, function 1:
Class 0380: PCI device 1002:496e (rev 1).
Master Capable. Latency=32. Min Gnt=8.
Prefetchable 32 bit memory at 0xe0000000 [0xe7ffffff].
Non-prefetchable 32 bit memory at 0xe8020000 [0xe802ffff].
Is there anything abovfe to show the error?
Mike Chambers
Madisonville, KY
--
fedora-test-list mailing list
fedora-test-list@xxxxxxxxxx
To unsubscribe:
https://www.redhat.com/mailman/listinfo/fedora-test-list