On Sun, 2005-06-05 at 22:13 +0200, Daniel Roesen wrote: > On Sat, Jun 04, 2005 at 11:59:49PM +0200, Daniel Roesen wrote: > > On Fri, Jun 03, 2005 at 11:45:17PM -0400, kas wrote: > > > libvgahw.a sent to address on your email. > > > > Thanks. Didn't help too much though. With DVI cable, now text mode > > is OK, but with VGA cable I'm no seeing something reminding of a > > desktop in X mode, but garbled text in console mode. > > > > Can you send me your FC3 mga_drv.o as mentioned by mharris in #157556 > > so I can test that too? > > Got it, thanks Karen. Unfortunately doesn't fix anything. > > So as far as I can see, FC4 X11 will be a complete no-go on my "simple" > Matrox G550 system, even with "hacks". > > > Best regards, > Daniel > > -- > CLUE-RIPE -- Jabber: dr@xxxxxxxxxx -- dr@IRCnet -- PGP: 0xA85C8AA0 > Hi Daniel Have you tried replacing all 18 xorg-x11 rpms ? At run level 3 something like s1=`rpm -qa|grep -i xorg-x11` triple check this is correct !!!!!!!!!!! echo $s1 Down load the FC3 versions I used xorg-x11-6.8.2-1.FC3.13 and saved them on a CD ready for FC4 !!!!! rpm --nodeps -e $s1 rpm --nodeps -i xorg-x11*.rpm This worked for me on FC4T2 and FC4T3 Hope this helps John