(discussion was moved to fedora-test) On Thu, 2005-03-17 at 23:13 +0100, Thomas Hille wrote: > Am Donnerstag, den 17.03.2005, 11:29 -0500 schrieb Ivan Gyurdiev: > > > Crash 3: Random freeze in the middle of what I'm doing. Screen freezes > > to a standstill. System responds to sysrq. Sysrq-p shows X to be active. > > I can provide more info if you'd like. > > > > This occurs with the nvidia binary driver. > > > > > > I had the exact same behavior, I first thought it was some update, but I > finally resolved it being the chipset getting too hot. Installing an > additional fan resolved it. - And believe me, I _NEVER_ would have > thought the chipset could overheat 5 minutes after boot and the other > time it worked for days without a reboot. Especially while my board, a > tyan thunder, was said to be extremely stable. (well now it is: uptime > 15 days, no reboot in sight) Okay. Well, it now seems like a hardware problem, because I just ran memtest on it, and halfway throughout the memtest the screen blanked (standby). I'm not sure how memtest works, but I think it's not supposed to do that. That implies it's a hardware problem. So, I replaced one memory chip, and it appeared to work. Gnome-terminal no longer crashed it, and I could play unreal... I was just getting pretty excited about finding the problem, and then it crashed again in unreal (nvidia.ko driver, obviously) (random garbage on screen). Replacing the other memory chip makes it crash too. So, it's a hardware problem; it's not the memory, though removing one memory chip gets rid of my problems with gnome-terminal (why?). It could be overheating, even though I have some ridiculous number of fans in, and the case was open when it last crashed. Maybe the video card's just broken - I've gotten it to come slightly out of the PCI slot, and reboot the computer a few times before, which can't be good for the card (it's not my fault - I can't screw the card in, because of Thermaltake's flawed design). How to proceed... I am back on the nv.ko driver, I turned on the RENDER extension, since it seems to make no difference. I've removed my newer memory chip, which I just got recently. I will see if I can get it to crash with the nv driver and my old memory setup. I'll also do a memtest, hoping to get it to completion on each memory chip. I'll take my video card w/ me over Spring Break to see if I can get it to crash on a Windows system. Other recommendations? --------------------- I have another question. This has bothered me for a very long time, but I've never reported it to LKML, since I assumed it was hardware problems. I have wireless Logitech peripherals (both kb and mouse). They're controlled by a usb receiver. After a forced reboot, they fail to work every time. I can't even type my on-boot password at the boot screen. If I turn off the computer, they still don't work after turning it back on. I need to unplug the power cord, wait 5 secs, and plug in back in, and it's fixed. Any idea why that would happen? It's so annoying... -- Ivan Gyurdiev <ivg2@xxxxxxxxxxx> Cornell University