I have: Adaptec 2000S zero-channel RAID controller 32MB (BIOS 1.41 2001/07/13) and therefore using I2O. I did a default custom install of FC3 and was able to install everything just fine. I have no problems with installation, but I am unable to access my scsi tape drive (A Sony SDT-11000: Channel 1 ID 6). I am running the following modules: i2o_core,i2o_proc,i2o_config,i2o_block Under /proc/i2o/iop0/206 I see: authorized_users ddm_identity dev_name phys_dev sensors user_info claimed dev_identity groups priv_msgs sgl_limits users The only interesting one seemed to be dev_identity cat /proc/i2o/iop0/206/dev_identity Device Class : SCSI Device Owner TID : 0xfff Parent TID : 0x009 Vendor info : SONY S Product info : SDT-11000 Description : 0 Product rev. : 0200 Serial number : Hardware: Supermicro P4DP6/E7500/Adaptec 7899W Ultra 160 Dual Xeon 2.4 4 GB RAM Adaptec 2000S zero-channel RAID controller 32MB (BIOS 1.41 2001/07/13) Matrox G540 Dual Head Video Controller Soundblaster Live 5.1 Sony SDT-11000 DDS-4 68-pin Ultra 2/LVD I can supply more info upon request. Thanks in advance -Eric -- Eric Hoeve fedora at ehoeve dot com