Thanks for the info ! On Thu, 2004-11-04 at 11:19 -0600, Bryan W. Headley wrote: > Kim Lux wrote: > > >Does anyone know how to set up/where to get a driver for the memory card > >readers on a laptop ? > > > > > Ah... A little bit of googling tells me that the ENE CB710 is a > PCI-to-Cardbus bridge.Verbiage discusses that is compatible with the > TI_12xx chipset, which a FreeBSD driver confirms... > > If you modify a patch like this (that adds the CB1440) , so there is a > line for the CB710, you might get joy. Let's see: "CB_ID(0x1524, 0x1411, > TI1250)," > > And obviously, I never tested any of this, your mileage may vary, watch > out for blue smoke... > > --- orig/drivers/pcmcia/yenta_socket.c Fri Mar 19 11:56:12 2004 > +++ linux/drivers/pcmcia/yenta_socket.c Fri Mar 19 20:54:16 2004 > @@ -1017,6 +1017,8 @@ static struct pci_device_id yenta_table > CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1250, TI1250), > CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1410, TI1250), > > + CB_ID(0x1524, 0x1410, TI1250), > + > CB_ID(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C465, RICOH), > CB_ID(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C466, RICOH), > CB_ID(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C475, RICOH), > > -- Kim Lux (Mr.) Diesel Research Inc