On Thu, Jul 31, 2014 at 2:35 PM, Robert Moskowitz <rgm@xxxxxxxxxxxxxxx> wrote: > It took me a bit to work out issues with the serial console to get back into > testing. Those issues are for a separate list... > > I can get Minimal to go through the install process and set timezone, root > password, and userid. When I go to log in I get: > > Fedora release 21 (Twenty One) > Kernel 3.16.0-0.rc7.git1.1.fc21.armv7hl on an armv7l (ttyS0) > > localhost login: root > Password: > [ 64.141895] cfg80211: Calling CRDA to update world regulatory domain > [ 66.257749] eth0: device MAC address c2:f5:e1:51:08:dd > [ 66.450111] No MAC Management Counters available > [ 66.712730] No MAC Management Counters available > [ 66.718353] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready > > [ 68.632241] stmmaceth 1c50000.ethernet eth0: Link is Up - 100Mbps/Full - > flow control off > [ 68.649252] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready > > Last login: Wed Dec 31 19:04:26 on ttyS0 > [root@localhost ~]# ifconfig > -bash: ifconfig: command not found > [root@localhost ~]# echo $PATH > /usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin > [root@localhost ~]# > > No commands work. I know the IP address this device gets assigned so I > tried pinging and ssh: the ip command as replaced pretty much all stuff (actually around 10 years ago!) but once you get use it it is much nicer. There's a quick start here http://andys.org.uk/bits/2010/02/24/iproute2-life-after-ifconfig/ or you can do "yum install net-tools" and get the old ones back. > You can probably ping it yourself, but port 22 is blocked at the firewall > router. firewall-cmd --help > I powered off and rebooted, and still the same behaviour. I did a screen > capture of the install, so can provide that if it would help (54K). Note I > have had this problem since I started on Minimal with the 20140724 build, > but have not been able to stablily test it. I believe my setup now provides > a reliable test of the build on a Cubieboard 2. It's expected behaviour so I'm not sure why you'd expect it to change, if you don't need a firewall you can just "yum remove firewalld" > Thank you and I await advise on what to provide next (or a build that works > for me). So I'm not sure what isn't working. The two issues you had above with network config and firewall are by design and there's a lot of good docs on the Fedora wiki and elsewhere that cover them and I've given you alternatives to the default. Is there anything else you need? Peter -- test mailing list test@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe: https://admin.fedoraproject.org/mailman/listinfo/test
