> Using serial port. The Hieroglyphics regularly occur on output. What serial rate and terminal program do you use? I see it occasionally but find screen is usually pretty decent "screen /dev/ttyUSB0 115200" > No network available had to create ifcfg-eth0 and ifup eth0 to start > network. Note not using IPV6 on router. We've seen that randomly but it's intermittently and still being investigated. > Did not resize partition! Known issue, we've seen an intermittent issue with finding rootfs that is believed could be to do with the growing of the partition so we've disabled it for the moment to see if we can get some data either way. https://bugzilla.redhat.com/show_bug.cgi?id=1109603 > First IP address given by router running openwrt and dnsmasq version 2.62. > root@router:~# cat /var/dhcp.leases > 1406708192 f6:6b:6e:a3:63:57 192.168.53.53 ct1 > ff:6e:a3:63:57:00:01:00:01:c7:92:be:b9:f6:6b:6e:a3:63:57 > > After reboot > > root@router:~# cat /var/dhcp.leases > 1406710000 be:bd:3e:5e:af:bd 192.168.53.59 ct1 > ff:3e:5e:af:bd:00:01:00:01:c7:92:be:b9:f6:6b:6e:a3:63:57 > 1406708192 f6:6b:6e:a3:63:57 192.168.53.53 * > ff:6e:a3:63:57:00:01:00:01:c7:92:be:b9:f6:6b:6e:a3:63:57 > > [root@ct1 ~]# ip link > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode > DEFAULT group default > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state > UP mode DEFAULT group default qlen 1000 > link/ether be:bd:3e:5e:af:bd brd ff:ff:ff:ff:ff:ff I'm not sure the CT has a fixed MAC address or serial number in which to derive one https://lists.fedoraproject.org/pipermail/arm/2013-December/007218.html > Attached dmesg.txt. > > Any assistance would be welcome. > > On another cubietruck I performed > yum update - this showed no updates available, even though the mirrors > were showing updates. Not sure on that one. > contents of /boot/extlinux/extlinux.conf > > label Fedora (3.16.0-0.rc5.git0.1.fc22.armv7hl) 22 (Rawhide) > kernel /vmlinuz-3.16.0-0.rc5.git0.1.fc22.armv7hl > append ro root=UUID=47984fd6-5fcb-4547-94be-3fa261beaa75 > console=ttyS0,115200 console=tty0 LANG=en_US.UTF-8 > fdtdir /dtb-3.16.0-0.rc4.git3.1.fc22.armv7hl/ > initrd /initramfs-3.16.0-0.rc5.git0.1.fc22.armv7hl.img > > Note the fdtdir should be fdtdir /dtb-3.16.0-0.rc6.git0.1.fc22.1.armv7hl That's a known blocker bug https://bugzilla.redhat.com/show_bug.cgi?id=1088933 Peter -- test mailing list test@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe: https://admin.fedoraproject.org/mailman/listinfo/test
