Compose started at Wed Sep 26 08:15:11 UTC 2012
Broken deps for x86_64
----------------------------------------------------------
[almanah]
almanah-0.8.0-7.fc18.x86_64 requires libedataserverui-3.0.so.3()(64bit)
almanah-0.8.0-7.fc18.x86_64 requires libedataserver-1.2.so.16()(64bit)
almanah-0.8.0-7.fc18.x86_64 requires libecal-1.2.so.12()(64bit)
almanah-0.8.0-7.fc18.x86_64 requires libebook-1.2.so.13()(64bit)
[clutter-gtk010]
clutter-gtk010-0.11.4-6.fc17.i686 requires libcogl.so.9
clutter-gtk010-0.11.4-6.fc17.x86_64 requires libcogl.so.9()(64bit)
[dogtag-pki]
dogtag-pki-10.0.0-0.8.a1.fc19.noarch requires pki-util-javadoc >= 0:10.0.0
dogtag-pki-10.0.0-0.8.a1.fc19.noarch requires pki-tools >= 0:10.0.0
dogtag-pki-10.0.0-0.8.a1.fc19.noarch requires pki-tks >= 0:10.0.0
dogtag-pki-10.0.0-0.8.a1.fc19.noarch requires pki-symkey >= 0:10.0.0
dogtag-pki-10.0.0-0.8.a1.fc19.noarch requires pki-silent >= 0:10.0.0
dogtag-pki-10.0.0-0.8.a1.fc19.noarch requires pki-setup >= 0:10.0.0
dogtag-pki-10.0.0-0.8.a1.fc19.noarch requires pki-server >= 0:10.0.0
dogtag-pki-10.0.0-0.8.a1.fc19.noarch requires pki-selinux >= 0:10.0.0
dogtag-pki-10.0.0-0.8.a1.fc19.noarch requires pki-ocsp >= 0:10.0.0
dogtag-pki-10.0.0-0.8.a1.fc19.noarch requires pki-kra >= 0:10.0.0
dogtag-pki-10.0.0-0.8.a1.fc19.noarch requires pki-java-tools-javadoc >= 0:10.0.0
dogtag-pki-10.0.0-0.8.a1.fc19.noarch requires pki-console >= 0:10.0.0
dogtag-pki-10.0.0-0.8.a1.fc19.noarch requires pki-common-javadoc >= 0:10.0.0
dogtag-pki-10.0.0-0.8.a1.fc19.noarch requires pki-ca >= 0:10.0.0
dogtag-pki-10.0.0-0.8.a1.fc19.noarch requires pki-base >= 0:10.0.0
[ease]
ease-0.4-18.fc17.i686 requires libcogl.so.9
ease-0.4-18.fc17.x86_64 requires libcogl.so.9()(64bit)
[evolution-exchange]
evolution-exchange-3.5.2-1.fc18.x86_64 requires libedataserverui-3.0.so.3()(64bit)
evolution-exchange-3.5.2-1.fc18.x86_64 requires libedataserver-1.2.so.16()(64bit)
evolution-exchange-3.5.2-1.fc18.x86_64 requires libedata-cal-1.2.so.17()(64bit)
evolution-exchange-3.5.2-1.fc18.x86_64 requires libedata-book-1.2.so.14()(64bit)
evolution-exchange-3.5.2-1.fc18.x86_64 requires libecal-1.2.so.12()(64bit)
evolution-exchange-3.5.2-1.fc18.x86_64 requires libebook-1.2.so.13()(64bit)
evolution-exchange-3.5.2-1.fc18.x86_64 requires libebackend-1.2.so.3()(64bit)
evolution-exchange-3.5.2-1.fc18.x86_64 requires libcamel-1.2.so.36()(64bit)
[fedora-ksplice]
fedora-ksplice-0.5-10.fc18.x86_64 requires ksplice
[flush]
flush-0.9.10-7.fc18.x86_64 requires libboost_thread-mt.so.1.48.0()(64bit)
flush-0.9.10-7.fc18.x86_64 requires libboost_system-mt.so.1.48.0()(64bit)
flush-0.9.10-7.fc18.x86_64 requires libboost_signals-mt.so.1.48.0()(64bit)
flush-0.9.10-7.fc18.x86_64 requires libboost_filesystem-mt.so.1.48.0()(64bit)
[fontik]
fontik-0.6.1-3.20120305git5dbbc513.fc19.x86_64 requires libgee-0.8.so.1()(64bit)
[freeipa]
freeipa-server-3.0.0-0.8.fc19.x86_64 requires selinux-policy >= 0:3.11.1-21
freeipa-server-3.0.0-0.8.fc19.x86_64 requires pki-symkey >= 0:10.0.0-0.33.a1
freeipa-server-3.0.0-0.8.fc19.x86_64 requires pki-silent >= 0:10.0.0-0.33.a1
freeipa-server-3.0.0-0.8.fc19.x86_64 requires pki-setup >= 0:10.0.0-0.33.a1
freeipa-server-3.0.0-0.8.fc19.x86_64 requires pki-ca >= 0:10.0.0-0.33.a1
[gcc-python-plugin]
gcc-python2-debug-plugin-0.9-4.fc19.x86_64 requires gcc = 0:4.7.1-7.fc19
gcc-python2-plugin-0.9-4.fc19.x86_64 requires gcc = 0:4.7.1-7.fc19
gcc-python3-debug-plugin-0.9-4.fc19.x86_64 requires gcc = 0:4.7.1-7.fc19
gcc-python3-plugin-0.9-4.fc19.x86_64 requires gcc = 0:4.7.1-7.fc19
[gcstar]
gcstar-1.7.0-2.fc19.noarch requires perl(Gtk2::Table)
gcstar-1.7.0-2.fc19.noarch requires perl(Gtk2::HBox)
gcstar-1.7.0-2.fc19.noarch requires perl(Gtk2::Frame)
gcstar-1.7.0-2.fc19.noarch requires perl(Gtk2::EventBox)
[gdb-heap]
gdb-heap-0.5-9.fc18.x86_64 requires glibc(x86-64) = 0:2.15
[glom]
glom-1.18.6-1.fc17.x86_64 requires libboost_python.so.1.48.0()(64bit)
glom-libs-1.18.6-1.fc17.i686 requires libboost_python.so.1.48.0
glom-libs-1.18.6-1.fc17.x86_64 requires libboost_python.so.1.48.0()(64bit)
[gnome-applets]
1:gnome-applets-3.5.1-1.fc18.x86_64 requires libgweather-3.so.0()(64bit)
[gnome-pilot]
gnome-pilot-eds-2.91.93-5.fc17.x86_64 requires libedataserverui-3.0.so.1()(64bit)
gnome-pilot-eds-2.91.93-5.fc17.x86_64 requires libedataserver-1.2.so.16()(64bit)
gnome-pilot-eds-2.91.93-5.fc17.x86_64 requires libecal-1.2.so.11()(64bit)
gnome-pilot-eds-2.91.93-5.fc17.x86_64 requires libebook-1.2.so.13()(64bit)
[gnome-shell-theme-selene]
gnome-shell-theme-selene-3.4.0-5.fc19.noarch requires gnome-shell-extensions-user-theme
[gwibber]
1:gwibber-3.4.2-3.fc18.i686 requires libgee-0.8.so.0
1:gwibber-3.4.2-3.fc18.x86_64 requires libgee-0.8.so.0()(64bit)
[kamoso]
kamoso-2.0.2-6.fc18.x86_64 requires libkipi.so.9()(64bit)
[kdeutils]
6:kdeutils-minimal-4.9.1-1.fc19.noarch requires kdf >= 0:4.9.1
[kphotoalbum]
kphotoalbum-4.2-4.fc18.x86_64 requires libkipi.so.9()(64bit)
[libguestfs]
1:libguestfs-1.19.44-2.fc19.i686 requires selinux-policy >= 0:3.11.1-23
1:libguestfs-1.19.44-2.fc19.x86_64 requires selinux-policy >= 0:3.11.1-23
[libsyncml]
1:libsyncml-0.4.6-4.fc17.i686 requires libsoup-2.2.so.8
1:libsyncml-0.4.6-4.fc17.x86_64 requires libsoup-2.2.so.8()(64bit)
[llvm]
clang-3.1-9.fc19.i686 requires libstdc++-devel = 0:4.7.1
clang-3.1-9.fc19.x86_64 requires libstdc++-devel = 0:4.7.1
[mapserver]
mapserver-perl-6.0.1-5.fc17.x86_64 requires perl(:MODULE_COMPAT_5.14.2)
[mod_pubcookie]
mod_pubcookie-3.3.4a-7.fc18.x86_64 requires httpd-mmn = 0:20051115-x86-64
[openvrml]
libopenvrml-0.18.9-3.fc18.i686 requires libboost_thread-mt.so.1.48.0
libopenvrml-0.18.9-3.fc18.i686 requires libboost_system-mt.so.1.48.0
libopenvrml-0.18.9-3.fc18.i686 requires libboost_filesystem-mt.so.1.48.0
libopenvrml-0.18.9-3.fc18.x86_64 requires libboost_thread-mt.so.1.48.0()(64bit)
libopenvrml-0.18.9-3.fc18.x86_64 requires libboost_system-mt.so.1.48.0()(64bit)
libopenvrml-0.18.9-3.fc18.x86_64 requires libboost_filesystem-mt.so.1.48.0()(64bit)
libopenvrml-gl-0.18.9-3.fc18.i686 requires libboost_thread-mt.so.1.48.0
libopenvrml-gl-0.18.9-3.fc18.i686 requires libboost_system-mt.so.1.48.0
libopenvrml-gl-0.18.9-3.fc18.i686 requires libboost_filesystem-mt.so.1.48.0
libopenvrml-gl-0.18.9-3.fc18.x86_64 requires libboost_thread-mt.so.1.48.0()(64bit)
libopenvrml-gl-0.18.9-3.fc18.x86_64 requires libboost_system-mt.so.1.48.0()(64bit)
libopenvrml-gl-0.18.9-3.fc18.x86_64 requires libboost_filesystem-mt.so.1.48.0()(64bit)
openvrml-java-0.18.9-3.fc18.x86_64 requires libboost_thread-mt.so.1.48.0()(64bit)
openvrml-java-0.18.9-3.fc18.x86_64 requires libboost_system-mt.so.1.48.0()(64bit)
openvrml-java-0.18.9-3.fc18.x86_64 requires libboost_filesystem-mt.so.1.48.0()(64bit)
openvrml-javascript-0.18.9-3.fc18.x86_64 requires libboost_thread-mt.so.1.48.0()(64bit)
openvrml-javascript-0.18.9-3.fc18.x86_64 requires libboost_system-mt.so.1.48.0()(64bit)
openvrml-javascript-0.18.9-3.fc18.x86_64 requires libboost_filesystem-mt.so.1.48.0()(64bit)
openvrml-nodes-0.18.9-3.fc18.x86_64 requires libboost_thread-mt.so.1.48.0()(64bit)
openvrml-nodes-0.18.9-3.fc18.x86_64 requires libboost_system-mt.so.1.48.0()(64bit)
openvrml-nodes-0.18.9-3.fc18.x86_64 requires libboost_filesystem-mt.so.1.48.0()(64bit)
openvrml-xembed-0.18.9-3.fc18.x86_64 requires libboost_thread-mt.so.1.48.0()(64bit)
openvrml-xembed-0.18.9-3.fc18.x86_64 requires libboost_system-mt.so.1.48.0()(64bit)
openvrml-xembed-0.18.9-3.fc18.x86_64 requires libboost_filesystem-mt.so.1.48.0()(64bit)
[pacemaker-cloud]
pacemaker-cloud-0.5.0-2.fc17.x86_64 requires libtransitioner.so.1()(64bit)
pacemaker-cloud-0.5.0-2.fc17.x86_64 requires libpengine.so.3()(64bit)
pacemaker-cloud-0.5.0-2.fc17.x86_64 requires libpe_status.so.3()(64bit)
pacemaker-cloud-0.5.0-2.fc17.x86_64 requires libcrmcommon.so.2()(64bit)
pacemaker-cloud-0.5.0-2.fc17.x86_64 requires libcib.so.1()(64bit)
[perl-Hardware-Verilog-Parser]
perl-Hardware-Verilog-Parser-0.13-9.fc17.noarch requires perl(:MODULE_COMPAT_5.14.2)
[perl-Hardware-Vhdl-Parser]
perl-Hardware-Vhdl-Parser-0.12-10.fc17.noarch requires perl(:MODULE_COMPAT_5.14.2)
[perl-OpenOffice-UNO]
perl-OpenOffice-UNO-0.07-3.fc17.x86_64 requires perl(:MODULE_COMPAT_5.14.2)
[perl-qpid]
perl-qpid-0.16-1.2.fc19.x86_64 requires qpid-cpp-client = 0:0.16
[php-pecl-gearman]
php-pecl-gearman-1.0.2-1.fc18.x86_64 requires libgearman.so.6()(64bit)
[pki-ra]
pki-ra-10.0.0-0.6.a1.fc19.noarch requires pki-server >= 0:10.0.0
[pki-tps]
pki-tps-10.0.0-0.6.a1.fc19.i686 requires pki-server >= 0:10.0.0
pki-tps-10.0.0-0.6.a1.fc19.x86_64 requires pki-server >= 0:10.0.0
[ppl]
ppl-swiprolog-0.11.2-10.fc18.x86_64 requires libswipl.so.6.0.2()(64bit)
[pyclutter]
pyclutter-1.3.2-12.fc18.x86_64 requires libcogl.so.9()(64bit)
[pyclutter-gst]
pyclutter-gst-1.0.0-9.fc18.x86_64 requires libcogl.so.9()(64bit)
[pyclutter-gtk]
pyclutter-gtk-0.10.0-13.fc18.x86_64 requires libcogl.so.9()(64bit)
[pyexiv2]
pyexiv2-0.3.2-4.fc18.x86_64 requires libboost_python.so.1.48.0()(64bit)
[pyfuzzy]
pyfuzzy-0.1.0-5.fc18.noarch requires antlr3-python
[python-webob1.2]
python3-webob1.2-1.2.1-4.fc17.noarch requires python(abi) = 0:3.2
[reciteword]
reciteword-0.8.4-10.fc18.x86_64 requires esound
[ruby-revolution]
ruby-revolution-0.5-4.svn210.fc18.15.x86_64 requires libedataserver-1.2.so.16()(64bit)
ruby-revolution-0.5-4.svn210.fc18.15.x86_64 requires libecal-1.2.so.12()(64bit)
ruby-revolution-0.5-4.svn210.fc18.15.x86_64 requires libebook-1.2.so.13()(64bit)
[rubygem-activeldap]
rubygem-activeldap-1.2.2-3.fc17.noarch requires rubygem(gettext_activerecord) >= 0:2.1.0
rubygem-activeldap-1.2.2-3.fc17.noarch requires ruby(abi) = 0:1.8
[rubygem-calendar_date_select]
rubygem-calendar_date_select-1.15-6.fc17.noarch requires ruby(abi) = 0:1.8
[rubygem-linecache]
rubygem-linecache-0.43-5.fc17.x86_64 requires ruby(abi) = 0:1.8
rubygem-linecache-0.43-5.fc17.x86_64 requires libruby.so.1.8()(64bit)
[rubygem-ruby-debug]
rubygem-ruby-debug-0.10.5-0.3.rc1.fc17.1.noarch requires ruby(abi) = 0:1.8
[rubygem-ruby-debug-base]
rubygem-ruby-debug-base-0.10.5-0.1.rc1.fc17.1.x86_64 requires ruby(abi) = 0:1.8
rubygem-ruby-debug-base-0.10.5-0.1.rc1.fc17.1.x86_64 requires libruby.so.1.8()(64bit)
[uwsgi]
uwsgi-plugin-php-1.2.4-4.fc18.x86_64 requires libphp5-5.4.5.so()(64bit)
[vigra]
vigra-python-1.8.0-5.fc18.x86_64 requires libboost_python-mt.so.1.48.0()(64bit)
[wt]
wt-3.2.2-6.p1.fc17.i686 requires libhpdf-2.1.0.so
wt-3.2.2-6.p1.fc17.i686 requires libboost_thread-mt.so.1.48.0
wt-3.2.2-6.p1.fc17.i686 requires libboost_system-mt.so.1.48.0
wt-3.2.2-6.p1.fc17.i686 requires libboost_signals-mt.so.1.48.0
wt-3.2.2-6.p1.fc17.i686 requires libboost_regex-mt.so.1.48.0
wt-3.2.2-6.p1.fc17.i686 requires libboost_random-mt.so.1.48.0
wt-3.2.2-6.p1.fc17.i686 requires libboost_program_options-mt.so.1.48.0
wt-3.2.2-6.p1.fc17.i686 requires libboost_filesystem-mt.so.1.48.0
wt-3.2.2-6.p1.fc17.i686 requires libboost_date_time-mt.so.1.48.0
wt-3.2.2-6.p1.fc17.x86_64 requires libhpdf-2.1.0.so()(64bit)
wt-3.2.2-6.p1.fc17.x86_64 requires libboost_thread-mt.so.1.48.0()(64bit)
wt-3.2.2-6.p1.fc17.x86_64 requires libboost_system-mt.so.1.48.0()(64bit)
wt-3.2.2-6.p1.fc17.x86_64 requires libboost_signals-mt.so.1.48.0()(64bit)
wt-3.2.2-6.p1.fc17.x86_64 requires libboost_regex-mt.so.1.48.0()(64bit)
wt-3.2.2-6.p1.fc17.x86_64 requires libboost_random-mt.so.1.48.0()(64bit)
wt-3.2.2-6.p1.fc17.x86_64 requires libboost_program_options-mt.so.1.48.0()(64bit)
wt-3.2.2-6.p1.fc17.x86_64 requires libboost_filesystem-mt.so.1.48.0()(64bit)
wt-3.2.2-6.p1.fc17.x86_64 requires libboost_date_time-mt.so.1.48.0()(64bit)
wt-dbo-3.2.2-6.p1.fc17.i686 requires libboost_thread-mt.so.1.48.0
wt-dbo-3.2.2-6.p1.fc17.i686 requires libboost_system-mt.so.1.48.0
wt-dbo-3.2.2-6.p1.fc17.i686 requires libboost_date_time-mt.so.1.48.0
wt-dbo-3.2.2-6.p1.fc17.x86_64 requires libboost_thread-mt.so.1.48.0()(64bit)
wt-dbo-3.2.2-6.p1.fc17.x86_64 requires libboost_system-mt.so.1.48.0()(64bit)
wt-dbo-3.2.2-6.p1.fc17.x86_64 requires libboost_date_time-mt.so.1.48.0()(64bit)
wt-dbo-postgres-3.2.2-6.p1.fc17.i686 requires libboost_thread-mt.so.1.48.0
wt-dbo-postgres-3.2.2-6.p1.fc17.i686 requires libboost_system-mt.so.1.48.0
wt-dbo-postgres-3.2.2-6.p1.fc17.i686 requires libboost_date_time-mt.so.1.48.0
wt-dbo-postgres-3.2.2-6.p1.fc17.x86_64 requires libboost_thread-mt.so.1.48.0()(64bit)
wt-dbo-postgres-3.2.2-6.p1.fc17.x86_64 requires libboost_system-mt.so.1.48.0()(64bit)
wt-dbo-postgres-3.2.2-6.p1.fc17.x86_64 requires libboost_date_time-mt.so.1.48.0()(64bit)
wt-examples-3.2.2-6.p1.fc17.x86_64 requires libhpdf-2.1.0.so()(64bit)
wt-examples-3.2.2-6.p1.fc17.x86_64 requires libboost_thread-mt.so.1.48.0()(64bit)
wt-examples-3.2.2-6.p1.fc17.x86_64 requires libboost_system-mt.so.1.48.0()(64bit)
wt-examples-3.2.2-6.p1.fc17.x86_64 requires libboost_signals-mt.so.1.48.0()(64bit)
wt-examples-3.2.2-6.p1.fc17.x86_64 requires libboost_regex-mt.so.1.48.0()(64bit)
wt-examples-3.2.2-6.p1.fc17.x86_64 requires libboost_random-mt.so.1.48.0()(64bit)
wt-examples-3.2.2-6.p1.fc17.x86_64 requires libboost_program_options-mt.so.1.48.0()(64bit)
wt-examples-3.2.2-6.p1.fc17.x86_64 requires libboost_filesystem-mt.so.1.48.0()(64bit)
wt-examples-3.2.2-6.p1.fc17.x86_64 requires libboost_date_time-mt.so.1.48.0()(64bit)
[znc-infobot]
znc-infobot-0.206-2.fc18.x86_64 requires znc = 0:0.206
Broken deps for i386
----------------------------------------------------------
[almanah]
almanah-0.8.0-7.fc18.i686 requires libedataserverui-3.0.so.3
almanah-0.8.0-7.fc18.i686 requires libedataserver-1.2.so.16
almanah-0.8.0-7.fc18.i686 requires libecal-1.2.so.12
almanah-0.8.0-7.fc18.i686 requires libebook-1.2.so.13
[clutter-gtk010]
clutter-gtk010-0.11.4-6.fc17.i686 requires libcogl.so.9
[dogtag-pki]
dogtag-pki-10.0.0-0.8.a1.fc19.noarch requires pki-util-javadoc >= 0:10.0.0
dogtag-pki-10.0.0-0.8.a1.fc19.noarch requires pki-tools >= 0:10.0.0
dogtag-pki-10.0.0-0.8.a1.fc19.noarch requires pki-tks >= 0:10.0.0
dogtag-pki-10.0.0-0.8.a1.fc19.noarch requires pki-symkey >= 0:10.0.0
dogtag-pki-10.0.0-0.8.a1.fc19.noarch requires pki-silent >= 0:10.0.0
dogtag-pki-10.0.0-0.8.a1.fc19.noarch requires pki-setup >= 0:10.0.0
dogtag-pki-10.0.0-0.8.a1.fc19.noarch requires pki-server >= 0:10.0.0
dogtag-pki-10.0.0-0.8.a1.fc19.noarch requires pki-selinux >= 0:10.0.0
dogtag-pki-10.0.0-0.8.a1.fc19.noarch requires pki-ocsp >= 0:10.0.0
dogtag-pki-10.0.0-0.8.a1.fc19.noarch requires pki-kra >= 0:10.0.0
dogtag-pki-10.0.0-0.8.a1.fc19.noarch requires pki-java-tools-javadoc >= 0:10.0.0
dogtag-pki-10.0.0-0.8.a1.fc19.noarch requires pki-console >= 0:10.0.0
dogtag-pki-10.0.0-0.8.a1.fc19.noarch requires pki-common-javadoc >= 0:10.0.0
dogtag-pki-10.0.0-0.8.a1.fc19.noarch requires pki-ca >= 0:10.0.0
dogtag-pki-10.0.0-0.8.a1.fc19.noarch requires pki-base >= 0:10.0.0
[ease]
ease-0.4-18.fc17.i686 requires libcogl.so.9
[evolution-exchange]
evolution-exchange-3.5.2-1.fc18.i686 requires libedataserverui-3.0.so.3
evolution-exchange-3.5.2-1.fc18.i686 requires libedataserver-1.2.so.16
evolution-exchange-3.5.2-1.fc18.i686 requires libedata-cal-1.2.so.17
evolution-exchange-3.5.2-1.fc18.i686 requires libedata-book-1.2.so.14
evolution-exchange-3.5.2-1.fc18.i686 requires libecal-1.2.so.12
evolution-exchange-3.5.2-1.fc18.i686 requires libebook-1.2.so.13
evolution-exchange-3.5.2-1.fc18.i686 requires libebackend-1.2.so.3
evolution-exchange-3.5.2-1.fc18.i686 requires libcamel-1.2.so.36
[fedora-ksplice]
fedora-ksplice-0.5-10.fc18.i686 requires ksplice
[flush]
flush-0.9.10-7.fc18.i686 requires libboost_thread-mt.so.1.48.0
flush-0.9.10-7.fc18.i686 requires libboost_system-mt.so.1.48.0
flush-0.9.10-7.fc18.i686 requires libboost_signals-mt.so.1.48.0
flush-0.9.10-7.fc18.i686 requires libboost_filesystem-mt.so.1.48.0
[fontik]
fontik-0.6.1-3.20120305git5dbbc513.fc19.i686 requires libgee-0.8.so.1
[freeipa]
freeipa-server-3.0.0-0.8.fc19.i686 requires selinux-policy >= 0:3.11.1-21
freeipa-server-3.0.0-0.8.fc19.i686 requires pki-symkey >= 0:10.0.0-0.33.a1
freeipa-server-3.0.0-0.8.fc19.i686 requires pki-silent >= 0:10.0.0-0.33.a1
freeipa-server-3.0.0-0.8.fc19.i686 requires pki-setup >= 0:10.0.0-0.33.a1
freeipa-server-3.0.0-0.8.fc19.i686 requires pki-ca >= 0:10.0.0-0.33.a1
[gcc-python-plugin]
gcc-python2-debug-plugin-0.9-4.fc19.i686 requires gcc = 0:4.7.1-7.fc19
gcc-python2-plugin-0.9-4.fc19.i686 requires gcc = 0:4.7.1-7.fc19
gcc-python3-debug-plugin-0.9-4.fc19.i686 requires gcc = 0:4.7.1-7.fc19
gcc-python3-plugin-0.9-4.fc19.i686 requires gcc = 0:4.7.1-7.fc19
[gcstar]
gcstar-1.7.0-2.fc19.noarch requires perl(Gtk2::Table)
gcstar-1.7.0-2.fc19.noarch requires perl(Gtk2::HBox)
gcstar-1.7.0-2.fc19.noarch requires perl(Gtk2::Frame)
gcstar-1.7.0-2.fc19.noarch requires perl(Gtk2::EventBox)
[gdb-heap]
gdb-heap-0.5-9.fc18.i686 requires glibc(x86-32) = 0:2.15
[glom]
glom-1.18.6-1.fc17.i686 requires libboost_python.so.1.48.0
glom-libs-1.18.6-1.fc17.i686 requires libboost_python.so.1.48.0
[gnome-applets]
1:gnome-applets-3.5.1-1.fc18.i686 requires libgweather-3.so.0
[gnome-pilot]
gnome-pilot-eds-2.91.93-5.fc17.i686 requires libedataserverui-3.0.so.1
gnome-pilot-eds-2.91.93-5.fc17.i686 requires libedataserver-1.2.so.16
gnome-pilot-eds-2.91.93-5.fc17.i686 requires libecal-1.2.so.11
gnome-pilot-eds-2.91.93-5.fc17.i686 requires libebook-1.2.so.13
[gnome-shell-theme-selene]
gnome-shell-theme-selene-3.4.0-5.fc19.noarch requires gnome-shell-extensions-user-theme
[gwibber]
1:gwibber-3.4.2-3.fc18.i686 requires libgee-0.8.so.0
[kamoso]
kamoso-2.0.2-6.fc18.i686 requires libkipi.so.9
[kdeutils]
6:kdeutils-minimal-4.9.1-1.fc19.noarch requires kdf >= 0:4.9.1
[kphotoalbum]
kphotoalbum-4.2-4.fc18.i686 requires libkipi.so.9
[libguestfs]
1:libguestfs-1.19.44-2.fc19.i686 requires selinux-policy >= 0:3.11.1-23
[libsyncml]
1:libsyncml-0.4.6-4.fc17.i686 requires libsoup-2.2.so.8
[llvm]
clang-3.1-9.fc19.i686 requires libstdc++-devel = 0:4.7.1
[mapserver]
mapserver-perl-6.0.1-5.fc17.i686 requires perl(:MODULE_COMPAT_5.14.2)
[mod_pubcookie]
mod_pubcookie-3.3.4a-7.fc18.i686 requires httpd-mmn = 0:20051115-x86-32
[openvrml]
libopenvrml-0.18.9-3.fc18.i686 requires libboost_thread-mt.so.1.48.0
libopenvrml-0.18.9-3.fc18.i686 requires libboost_system-mt.so.1.48.0
libopenvrml-0.18.9-3.fc18.i686 requires libboost_filesystem-mt.so.1.48.0
libopenvrml-gl-0.18.9-3.fc18.i686 requires libboost_thread-mt.so.1.48.0
libopenvrml-gl-0.18.9-3.fc18.i686 requires libboost_system-mt.so.1.48.0
libopenvrml-gl-0.18.9-3.fc18.i686 requires libboost_filesystem-mt.so.1.48.0
openvrml-java-0.18.9-3.fc18.i686 requires libboost_thread-mt.so.1.48.0
openvrml-java-0.18.9-3.fc18.i686 requires libboost_system-mt.so.1.48.0
openvrml-java-0.18.9-3.fc18.i686 requires libboost_filesystem-mt.so.1.48.0
openvrml-javascript-0.18.9-3.fc18.i686 requires libboost_thread-mt.so.1.48.0
openvrml-javascript-0.18.9-3.fc18.i686 requires libboost_system-mt.so.1.48.0
openvrml-javascript-0.18.9-3.fc18.i686 requires libboost_filesystem-mt.so.1.48.0
openvrml-nodes-0.18.9-3.fc18.i686 requires libboost_thread-mt.so.1.48.0
openvrml-nodes-0.18.9-3.fc18.i686 requires libboost_system-mt.so.1.48.0
openvrml-nodes-0.18.9-3.fc18.i686 requires libboost_filesystem-mt.so.1.48.0
openvrml-xembed-0.18.9-3.fc18.i686 requires libboost_thread-mt.so.1.48.0
openvrml-xembed-0.18.9-3.fc18.i686 requires libboost_system-mt.so.1.48.0
openvrml-xembed-0.18.9-3.fc18.i686 requires libboost_filesystem-mt.so.1.48.0
[pacemaker-cloud]
pacemaker-cloud-0.5.0-2.fc17.i686 requires libtransitioner.so.1
pacemaker-cloud-0.5.0-2.fc17.i686 requires libpengine.so.3
pacemaker-cloud-0.5.0-2.fc17.i686 requires libpe_status.so.3
pacemaker-cloud-0.5.0-2.fc17.i686 requires libcrmcommon.so.2
pacemaker-cloud-0.5.0-2.fc17.i686 requires libcib.so.1
[perl-Hardware-Verilog-Parser]
perl-Hardware-Verilog-Parser-0.13-9.fc17.noarch requires perl(:MODULE_COMPAT_5.14.2)
[perl-Hardware-Vhdl-Parser]
perl-Hardware-Vhdl-Parser-0.12-10.fc17.noarch requires perl(:MODULE_COMPAT_5.14.2)
[perl-OpenOffice-UNO]
perl-OpenOffice-UNO-0.07-3.fc17.i686 requires perl(:MODULE_COMPAT_5.14.2)
perl-OpenOffice-UNO-0.07-3.fc17.i686 requires libsal_textenc.so
[perl-qpid]
perl-qpid-0.16-1.2.fc19.i686 requires qpid-cpp-client = 0:0.16
[php-pecl-gearman]
php-pecl-gearman-1.0.2-1.fc18.i686 requires libgearman.so.6
[pki-ra]
pki-ra-10.0.0-0.6.a1.fc19.noarch requires pki-server >= 0:10.0.0
[pki-tps]
pki-tps-10.0.0-0.6.a1.fc19.i686 requires pki-server >= 0:10.0.0
[policycoreutils]
policycoreutils-sandbox-2.1.13-2.fc19.i686 requires libselinux.so.1()(64bit)
policycoreutils-sandbox-2.1.13-2.fc19.i686 requires libcgroup.so.1(CGROUP_0.34)(64bit)
policycoreutils-sandbox-2.1.13-2.fc19.i686 requires libcgroup.so.1(CGROUP_0.32)(64bit)
policycoreutils-sandbox-2.1.13-2.fc19.i686 requires libcgroup.so.1()(64bit)
policycoreutils-sandbox-2.1.13-2.fc19.i686 requires libcap-ng.so.0()(64bit)
policycoreutils-sandbox-2.1.13-2.fc19.i686 requires libc.so.6(GLIBC_2.3.4)(64bit)
[ppl]
ppl-swiprolog-0.11.2-10.fc18.i686 requires libswipl.so.6.0.2
[pyclutter]
pyclutter-1.3.2-12.fc18.i686 requires libcogl.so.9
[pyclutter-gst]
pyclutter-gst-1.0.0-9.fc18.i686 requires libcogl.so.9
[pyclutter-gtk]
pyclutter-gtk-0.10.0-13.fc18.i686 requires libcogl.so.9
[pyexiv2]
pyexiv2-0.3.2-4.fc18.i686 requires libboost_python.so.1.48.0
[pyfuzzy]
pyfuzzy-0.1.0-5.fc18.noarch requires antlr3-python
[python-webob1.2]
python3-webob1.2-1.2.1-4.fc17.noarch requires python(abi) = 0:3.2
[reciteword]
reciteword-0.8.4-10.fc18.i686 requires esound
[ruby-revolution]
ruby-revolution-0.5-4.svn210.fc18.15.i686 requires libedataserver-1.2.so.16
ruby-revolution-0.5-4.svn210.fc18.15.i686 requires libecal-1.2.so.12
ruby-revolution-0.5-4.svn210.fc18.15.i686 requires libebook-1.2.so.13
[rubygem-activeldap]
rubygem-activeldap-1.2.2-3.fc17.noarch requires rubygem(gettext_activerecord) >= 0:2.1.0
rubygem-activeldap-1.2.2-3.fc17.noarch requires ruby(abi) = 0:1.8
[rubygem-calendar_date_select]
rubygem-calendar_date_select-1.15-6.fc17.noarch requires ruby(abi) = 0:1.8
[rubygem-linecache]
rubygem-linecache-0.43-5.fc17.i686 requires ruby(abi) = 0:1.8
rubygem-linecache-0.43-5.fc17.i686 requires libruby.so.1.8
[rubygem-ruby-debug]
rubygem-ruby-debug-0.10.5-0.3.rc1.fc17.1.noarch requires ruby(abi) = 0:1.8
[rubygem-ruby-debug-base]
rubygem-ruby-debug-base-0.10.5-0.1.rc1.fc17.1.i686 requires ruby(abi) = 0:1.8
rubygem-ruby-debug-base-0.10.5-0.1.rc1.fc17.1.i686 requires libruby.so.1.8
[rubygem-virt-p2v]
rubygem-virt-p2v-0.8.3-2.fc17.i686 requires ruby(abi) = 0:1.8
rubygem-virt-p2v-0.8.3-2.fc17.i686 requires libruby.so.1.8
[uwsgi]
uwsgi-plugin-php-1.2.4-4.fc18.i686 requires libphp5-5.4.5.so
[vigra]
vigra-python-1.8.0-5.fc18.i686 requires libboost_python-mt.so.1.48.0
[wt]
wt-3.2.2-6.p1.fc17.i686 requires libhpdf-2.1.0.so
wt-3.2.2-6.p1.fc17.i686 requires libboost_thread-mt.so.1.48.0
wt-3.2.2-6.p1.fc17.i686 requires libboost_system-mt.so.1.48.0
wt-3.2.2-6.p1.fc17.i686 requires libboost_signals-mt.so.1.48.0
wt-3.2.2-6.p1.fc17.i686 requires libboost_regex-mt.so.1.48.0
wt-3.2.2-6.p1.fc17.i686 requires libboost_random-mt.so.1.48.0
wt-3.2.2-6.p1.fc17.i686 requires libboost_program_options-mt.so.1.48.0
wt-3.2.2-6.p1.fc17.i686 requires libboost_filesystem-mt.so.1.48.0
wt-3.2.2-6.p1.fc17.i686 requires libboost_date_time-mt.so.1.48.0
wt-dbo-3.2.2-6.p1.fc17.i686 requires libboost_thread-mt.so.1.48.0
wt-dbo-3.2.2-6.p1.fc17.i686 requires libboost_system-mt.so.1.48.0
wt-dbo-3.2.2-6.p1.fc17.i686 requires libboost_date_time-mt.so.1.48.0
wt-dbo-postgres-3.2.2-6.p1.fc17.i686 requires libboost_thread-mt.so.1.48.0
wt-dbo-postgres-3.2.2-6.p1.fc17.i686 requires libboost_system-mt.so.1.48.0
wt-dbo-postgres-3.2.2-6.p1.fc17.i686 requires libboost_date_time-mt.so.1.48.0
wt-examples-3.2.2-6.p1.fc17.i686 requires libhpdf-2.1.0.so
wt-examples-3.2.2-6.p1.fc17.i686 requires libboost_thread-mt.so.1.48.0
wt-examples-3.2.2-6.p1.fc17.i686 requires libboost_system-mt.so.1.48.0
wt-examples-3.2.2-6.p1.fc17.i686 requires libboost_signals-mt.so.1.48.0
wt-examples-3.2.2-6.p1.fc17.i686 requires libboost_regex-mt.so.1.48.0
wt-examples-3.2.2-6.p1.fc17.i686 requires libboost_random-mt.so.1.48.0
wt-examples-3.2.2-6.p1.fc17.i686 requires libboost_program_options-mt.so.1.48.0
wt-examples-3.2.2-6.p1.fc17.i686 requires libboost_filesystem-mt.so.1.48.0
wt-examples-3.2.2-6.p1.fc17.i686 requires libboost_date_time-mt.so.1.48.0
[znc-infobot]
znc-infobot-0.206-2.fc18.i686 requires znc = 0:0.206
New package: 0ad-0.0.11-3.fc19
Cross-Platform RTS Game of Ancient Warfare
New package: 0ad-data-0.0.11-3.fc19
The Data Files for 0 AD
New package: ceelog-0.1-1.fc19
Tool for receiving, filtering and searching CEE/Lumberjack logs
New package: datovka-2.1.2-2.fc19
A free graphical interface for Czech Databox (Datové schránky)
New package: nemo-1.0.1-5.fc19
File manager for Cinnamon
New package: rubygem-abrt-0.0.3-1.fc18
ABRT support for Ruby MRI
New package: wt-3.2.2-6.p1.fc17
C++ library for developing web applications
Updated Packages:
389-ds-base-1.2.11.15-1.fc19
----------------------------
* Tue Sep 25 2012 Rich Megginson <rmeggins@xxxxxxxxxx> - 1.2.11.15-1
- Trac Ticket #470 - 389 prevents from adding a posixaccount with userpassword after schema reload
- Ticket 477 - CLEANALLRUV if there are only winsync agmts task will hang
- Ticket 457 - dirsrv init script returns 0 even when few or all instances fail to start
- Ticket 473 - change VERSION.sh to have console version be major.minor
- Ticket 475 - Root DN Access Control - improve value checking for config
- Trac Ticket #466 - entry_apply_mod - ADD: Failed to set unhashed#user#password to extension
- Ticket 474 - Root DN Access Control - days allowed not working correctly
- Ticket 467 - CLEANALLRUV abort task should be able to ignore down replicas
- 0b79915 fix compiler warnings in ticket 374 code
- Ticket 452 - automember rebuild task adds users to groups that do not match the configuration scope
GAPDoc-1.5.1-2.fc19
-------------------
* Tue Sep 25 2012 Jerry James <loganjerry@xxxxxxxxx> - 1.5.1-2
- Rebuild to fix _gap_dir expansion issue
anaconda-18.9-1.fc19
--------------------
* Tue Sep 25 2012 Chris Lumens <clumens@xxxxxxxxxx> - 18.9-1
- And remove compssort.py from POTFILES.in, too. (clumens)
- Select a default environment (#858180). (clumens)
- Remove compssort.py. (clumens)
- Don't attempt to catch and re-raise a SystemError from AnacondaThread.run.
(clumens)
- Add a progress message for quitting the installer. (clumens)
- GUI error handling dialogs need to be protected from threading deadlocks.
(clumens)
- Initialize gdk threading as well. (clumens)
- Handle --ignoremissing in _applyYumSelections (#859021). (clumens)
- Fix the destination path for anaconda.xlog (#860041). (clumens)
- Hide the ISO install source if you've nuked all possible drives (#858088).
(clumens)
- Don't write out /etc/sysconfig/clock anymore (#859217). (clumens)
- Index the exn mapping by string, not by object. (clumens)
- Don't write HOSTNAME=HOSTNAME=myhostnamehere (#859141). (clumens)
- Close temp file before moving it (#858681) (vpodzime)
- Update widget-specific TODO list. (clumens)
- Don't use grey for the status text of a SpokeSelector (#855638). (clumens)
- Fix a typo in makeupdates. (clumens)
- UEFI paths must include a leading backslash on some machines. (#856938)
(pjones)
- Read cmdline files from /run/install (jkeating)
- Copy command line files prior to pivot (jkeating)
- Grab the proxy username from the correct text entry (#858536). (clumens)
- Remove our use of scsi_wait_scan (#858393). (clumens)
- Don't overwrite the opts attribute on NFS installs (#858700). (clumens)
- Change the keyboard shortcut for the updates checkbox. (clumens)
- Add the storage category to POTFILES.in. (clumens)
- Don't explicitly start the progress spinner in python code. (clumens)
- Move the progress bar back down to the bottom of the progress hub. (clumens)
- Remove a bunch of stuff from the TODO list for a change. (clumens)
- Move check of new partition size against format limits. (dlehman)
- Improve growth check when deciding where to allocate new partitions.
(dlehman)
- Keep btrfs selectors' sizes in sync as volume size changes. (dlehman)
- Allow specification of a label for new swap space via custom ui. (dlehman)
- Don't allow stage2 as stage1 unless specified via location. (dlehman)
- Remove reference to PartitioningWarning, which was removed last week
(#875931). (clumens)
- Add a way to test exception handling (vpodzime)
- Fix dumpState to work with the new python-meh (#856235) (vpodzime)
* Fri Sep 14 2012 Chris Lumens <clumens@xxxxxxxxxx> - 18.8-1
- Make sure the InstallOptionsNDialogs get the correct space labels. (clumens)
- Get rid of the big pause going from the storage spoke back to the hub.
(clumens)
- Don't fail when making updates if the symlink already exists. (clumens)
- Make sure to set the default TZ in ksdata so the completed method works.
(clumens)
- Allow creation of biosboot and prepboot partitions in the custom spoke.
(dlehman)
- Hide removable disks containing install media from the custom spoke.
(dlehman)
- Make the minimum size for custom spoke partitions 1MB. (dlehman)
- The return value of execWithRedirect is an integer. (dlehman)
- Only include following free space in partitions' max size. (dlehman)
- Handle btrfs volumes with a dataLevel of None. (dlehman)
- Handle newDevice partitions smaller than the default of 500MB. (#853125)
(dlehman)
- Add underlines to the expander and encryption checkbox in custom
partitioning. (clumens)
- Remember to mark an environment as selected in the store. (clumens)
- Rename the addon/environment store columns to make sense. (clumens)
- Use slightly less confusing labels for the various back buttons. (clumens)
- Add a property to SpokeWindow for setting the single button's label.
(clumens)
- Rename the SpokeWindow's back button to just button. (clumens)
- Use the blocking read to avoid busy wait in TUI progress (msivak)
- Make progress hub spokes possible and move the root password there (msivak)
- Don't let user hit Add button if no new layouts are selected (vpodzime)
- Gtk.ListStore.iter_previous now returns new iterator (#849060) (vpodzime)
- Write storage configs after payload install for live installs. (#856836)
(dlehman)
- Update the pot file for various important string changes. (clumens)
- Attempt to fix word wrapping issues with the betanag dialog (#853913).
(clumens)
- CONTINUE -> BEGIN INSTALLATION (#856614). (clumens)
- Language selection should work the same as keyboard selection (#854570).
(clumens)
- Fix ransom notes cycling. (clumens)
- Improve the clarity of the custom checkbutton label. (dlehman)
- Add error handling around significant ui-initiated storage operations.
(dlehman)
- Improve error granularity slightly in automatic partitioning. (dlehman)
- Fix detection of preexisting md arrays again. (dlehman)
- Handle changes to sizes of predefined devices in custom spoke. (dlehman)
- Fix traceback when switching device type to BTRFS. (dlehman)
- Validate mountpoints in the add-a-mountpoint dialog. (dlehman)
- Tell 'lvm' that yes, we really, really want to remove PV (vpodzime)
- Use 250ms interval for installation progress updating (vpodzime)
- network spoke: hide for live CD and image installs (#854586) (rvykydal)
- Fixed luks_add_key() (jsafrane)
- Display a radio button next to the environment choices. (clumens)
- Update TODO list. (clumens)
- Set the busy spinning cursor while the UI is loading. (clumens)
- network spoke: add "No network devices available" status (rvykydal)
- network spoke: clear device info if no network devices are found (#853903)
(rvykydal)
- fix root password setup (#855481) (bcl)
- Rewrite expand_langs to return more items (vpodzime)
- Don't try to setup X layouts in text installation (#852447) (vpodzime)
- Add UTF-8 enconding suffix to our language strings (#854688) (vpodzime)
- Require rsync (vpodzime)
- Don't rely on chrony.conf file being available (#854899) (vpodzime)
- Require chrony and rdate, because Anaconda needs them (#854899) (vpodzime)
- Use the real path to dracut-lib.sh (#851362) (jkeating)
- fixup live install (#853988, #854962) (bcl)
- Only check media if we really want it (#853404) (jkeating)
- Fix thinko in anaconda arg handling portion of multilib patch. (dlehman)
- Honor kickstart and command line switches to enable multilib. (dlehman)
- Quitting the live installer shouldn't reboot the system (#854904). (clumens)
- The kickstart language-related command is "lang", not "language". (clumens)
- Fix btrfs/lvm/raid kickstart installs (#853649). (clumens)
- Store "en" as the default, not "en_US". (clumens)
- Mark ksdata.*.execute invocations as another step (vpodzime)
- Reorder and comment options passed to rsync (vpodzime)
- Fix bug in writing keyboard configuration files (vpodzime)
- network spoke: require connection only for url and nfs methods (#853899)
(rvykydal)
- Drop the addBase handling in anaconda - if you want a group, list a group.
(notting)
- Don't depend on storage or instClass in EFIGRUB (pjones)
- Use self.stage1_device where appropriate in EFIGRUB. (pjones)
- Explicitly disable the rootpw lock (#853788) (jkeating)
- require nm-connection-editor (#854586) (bcl)
- Include packaging log in exception reports. (dlehman)
- Add Kazakh as a valid translation. (clumens)
- Deselect any existing environment when selecting a new one (#851510).
(clumens)
- Use chvt command for tty switching (vpodzime)
- Use the disk's serial number instead of index as an ID. (clumens)
- Use the disk's ID for deleting from the shopping cart, not an index
(#853798). (clumens)
- Use the F18_Partition class (#853593). (clumens)
- Remove anaconda.instLanguage object and language module (vpodzime)
- Remove lang-table and localeinfo.py (vpodzime)
- parse-kickstart: handle 'network --ipv6=auto ...' (wwoods)
- parse-kickstart: set IPV6INIT=yes when using ipv6 (#830434) (wwoods)
- Make TUI password spoke behave the same as it's GUI counterpart (msivak)
- Remove ROOT_PATH/etc/localtime before symlinking timezone (vpodzime)
- Continue post-installation steps even if writing NTP configuration fails
(vpodzime)
- update transifex.txt for newui (bcl)
- Handle invalid spoke input (#853253) (jkeating)
- Remove unnecessary (and broken) import (#853576) (jkeating)
- Destroy the Add Mountpoint dialog when escape is pressed (#853058). (clumens)
- Keep the current spoke on top of the hub. (clumens)
- And then fix an assortment of non-packaging pylint errors, too. (clumens)
- Fix problems in the packaging module that pylint detected. (clumens)
- Update runpylint to find newui modules correctly. (clumens)
- Prevent duplicate mountpoint creation. (dlehman)
- If there's only one disk, select it by default. (dlehman)
- Evaulate growth potential for all reqs, even when allocating a fixed req.
(dlehman)
- Do not honor partitions' disk attr when reallocating them. (dlehman)
- Set size is a safe max size for partitions. (dlehman)
- Set the ANACONDA udev property in the post-switchroot udevdb. (dlehman)
- Calculate size func kwargs at call time to pick up changes. (dlehman)
- Add support md devices and btrfs raid features in the custom spoke. (dlehman)
- Move the BTRFS options to last and remove unsupported options. (dlehman)
- Remove "Technology" ComboBoxes from device options for now. (dlehman)
- Tweak setContainerMembers to work with a defined md array. (dlehman)
- Add support for named md devices. (dlehman)
- Make sure a disk is partitioned before treating it as such. (#849707)
(dlehman)
- Setup python path /after/ we've done updates (jkeating)
- Fix a string substitution think-o (jkeating)
- We now BuildRequires python-babel as well. (clumens)
- Update TODO list. (clumens)
- Only show groups in the UI if they have members that install by default
(default or manadtory packages). (notting)
- Symlink /run/initramfs/inst.{updates,product} to /tmp (jkeating)
- Use shutil.move for replacing old config with the new one (vpodzime)
- Honor user's choice on NTP (ON/OFF) (vpodzime)
- Don't crash if someone gives us bad timezone (vpodzime)
- Use expand_langs to find matching language (LanguageSpoke) (vpodzime)
- Move expandLangs to localization module (vpodzime)
- Use Gtk.main_level() to check if main loop is already running (vpodzime)
- Move setup from ImagePayload to LiveImagePayload. (clumens)
- Avoid duplicates in the packages property. (clumens)
- Set a progress message when liveinst starts installing software. (clumens)
- Fix default definitions of some payload class methods. (clumens)
- Add a spaceRequired property for LiveImagePayload. (clumens)
- getDirSize should stay on a single filesystem, not look at submounts.
(clumens)
- Don't look for existing installations on live devices. (clumens)
- We don't need image_file in the live payload. (clumens)
- Now that we're using rsync, the livecd and rootfs do not have to match.
(clumens)
- Disable software selection and source spokes on live installs. (clumens)
- Fix args to LiveImagePayload.setup (#852272). (clumens)
- require anaconda-widgets (bcl)
- Handle already mounted optical devices (#851274) (jkeating)
- Return full device object of selected optical drive (jkeating)
- Add a method to determine if device is mounted (jkeating)
- anaconda-cleanup: fix DeviceTree args (bcl)
- Unset install_device if repo setup fails (jkeating)
- _peopleRepositoriesFilter -> _peopleRepositoriesFilterEntry (#852182).
(clumens)
- on_*_changed callbacks take one argument, not two. (clumens)
- Use the correct icon size constant. (clumens)
- remove dead code (setMethodstr, expandFTPMethod) (wwoods)
- parse-kickstart: update some TODO comments (wwoods)
- parse-kickstart: simplify logging (wwoods)
- enable fastestmirror yum plugin (#849797) (bcl)
- networking: remove Network() object (rvykydal)
- networking: use ksdata.network.hostname instead of actual installer hostname
(rvykydal)
- networking: consolidate writing/copying of configuration files (rvykydal)
- networking: 70-persistent-net.rules doesn't exist anymore. (rvykydal)
- networking: disable ipv6 directly in installed system config file (rvykydal)
- networking: mirror end-of-installation network config tweaks in ksdata.
(rvykydal)
- networking: write configuration in doInstall (rvykydal)
- Add mounts before swaps so the default selection is a mount. (dlehman)
- Use MB if a new mountpoint size does not include a unit spec. (#850839)
(dlehman)
- Correctly handle partitions with sizes smaller than 500MB. (#850839)
(dlehman)
- Don't include removed devices in Storage.unusedDevices. (dlehman)
- Handle SameSizeSet growth trimming when all members are too large. (dlehman)
- Add several missing yum lock aqcuisitions. (#851212) (dlehman)
- Offer completions for new mountpoints. (dlehman)
- Add old_source checking for closest mirror and url methods too (#851336).
(clumens)
- Revert "Only use mounted media that has repodata" (jkeating)
- Only use mounted media that has repodata (jkeating)
- _bootloaderClass -> bootloaderClass for some platforms (#848173). (clumens)
- Make the storage info bar clickable to reveal error messages. (clumens)
- Move the software-specific error message out of the DetailedErrorDialog
class. (clumens)
- Add a gui password spoke (jkeating)
- Put traceback reports on a diet. (clumens)
anjuta-3.5.91-2.fc18
--------------------
* Thu Sep 20 2012 Cosimo Cecchi <cosimoc@xxxxxxxxxx> - 1:3.5.91-2
- Rebuild for libglade soname bump
atool-0.39.0-1.fc19
-------------------
* Tue Sep 25 2012 Elder Marco <eldermarco@xxxxxxxxxxxxxxxxx> - 0.39.0-1
- Update to 0.39.0
authconfig-6.2.4-1.fc19
-----------------------
* Tue Sep 25 2012 Tomas Mraz <tmraz@xxxxxxxxxx> - 6.2.4-1
- backup also passwd and friends when toggling enableshadow (#853074)
- use the new smb.conf idmap config range syntax (#850824)
- use local_users_only with pam_pwquality (#849072)
- enable the authlogin_nsswitch_use_ldap SELinux boolean when enabling LDAP (#846084)
- preserve the value of cache_credentials in sssd.conf
- do not fail PAM session if pam_lastlog module fails
- use sssd also for automount map (#847823)
- enable deferred_kinit if cache_credentials is enabled (#814384)
bdii-5.2.13-1.fc19
------------------
* Wed Aug 15 2012 Laurence Field <Laurence.Field@xxxxxxx> - 5.2.13-1
- Included Fedora patches upstream.
clutter-1.12.0-2.fc19
---------------------
* Tue Sep 25 2012 Kalev Lember <kalevlember@xxxxxxxxx> - 1.12.0-2
- Obsolete clutter-gtk010 and clutter-sharp as well
* Tue Sep 25 2012 Kalev Lember <kalevlember@xxxxxxxxx> - 1.12.0-1
- Update to 1.12.0
- Obsolete pyclutter, -gst and -gtk packages
cogl-1.12.0-1.fc18
------------------
* Tue Sep 25 2012 Kalev Lember <kalevlember@xxxxxxxxx> - 1.12.0-1
- Update to 1.12.0
* Tue Sep 18 2012 Kalev Lember <kalevlember@xxxxxxxxx> - 1.11.6-1
- Update to 1.11.6
- Drop upstreamed cogl-1.11.4-mesa-strings.patch
deja-dup-23.92-1.fc18
---------------------
* Fri Sep 21 2012 Kalev Lember <kalevlember@xxxxxxxxx> - 23.92-1
- Update to 23.92
emacs-spice-mode-1.2.25-10.fc19
-------------------------------
* Tue Sep 25 2012 Shakthi Kannan <shakthimaan [AT] fedoraproject dot org> - 1.2.25-10
- Removed requires gwave
empathy-3.6.0-1.fc19
--------------------
* Tue Sep 25 2012 Brian Pepple <bpepple@xxxxxxxxxxxxxxxxx> - 3.6.0-1
- Update to 3.6.0.
ethtool-3.5-1.fc19
------------------
* Tue Sep 25 2012 Jaromir Capik <jcapik@xxxxxxxxxx> 2:3.5-1
- Update to 3.5 (#840741)
evince-3.6.0-1.fc19
-------------------
* Tue Sep 25 2012 Marek Kasik <mkasik@xxxxxxxxxx> - 3.6.0-1
- Update to 3.6.0
ftp-0.17-60.fc19
----------------
* Tue Sep 25 2012 Jan Synáček <jsynacek@xxxxxxxxxx> - 0.17-60
- Plug leaks in "put", "send", "append"
- Add listening timeout
glade-3.14.0-1.fc18
-------------------
* Wed Sep 19 2012 Kalev Lember <kalevlember@xxxxxxxxx> - 3.14.0-1
- Update to 3.14.0
- Remove the unrecognized --disable-scrollkeeper option
glibc-2.16.90-16.fc19
---------------------
* Tue Sep 25 2012 Jeff Law <law@xxxxxxxxxx> - 2.16.90-16
- Resync with upstream sources.
* Fri Sep 21 2012 Jeff Law <law@xxxxxxxxxx> - 2.16.90-15
- Remove most of fedora-nscd patch as we no longer use the
old init files, but systemd instead.
- Remove path-to-vi patch. With the usr-move changes that
patch is totally unnecessary.
- Remove i686-nopl patch. Gas was changed back in 2011 to
avoid nopl.
- Move gai-rfc1918 patch to submitted upstream status
gnome-boxes-3.6.0-1.fc19
------------------------
* Tue Sep 25 2012 Christophe Fergeau <cfergeau@xxxxxxxxxx> - 3.6.0-1
- Update to 3.6.0
* Wed Sep 19 2012 Richard Hughes <hughsient@xxxxxxxxx> - 3.5.92-1
- Update to 3.5.92
gr-air-modes-0-0.4.20120905git6c7a7370.fc19
-------------------------------------------
* Tue Sep 25 2012 Jaroslav Škarvada <jskarvad@xxxxxxxxxx> - 0-0.4.20120905git6c7a7370
- Hardcoded path for sbindir to silent depcheck errors
gvfs-1.14.0-1.fc19
------------------
* Tue Sep 25 2012 Tomas Bzatek <tbzatek@xxxxxxxxxx> - 1.14.0-1
- Update to 1.14.0
heat-6-3.fc19
-------------
* Tue Sep 25 2012 Jeff Peeler <jpeeler@xxxxxxxxxx> 6-3
- change systemd scripts to use openstack-heat user
ipset-6.14-1.fc19
-----------------
* Wed Sep 26 2012 Mathieu Bridon <bochecha@xxxxxxxxxxxxxxxxx> - 6.14-1
- New upstream release.
- Fix scriptlets, ldconfig is needed for the libs subpackage, not the main one.
jalv-1.0.0-5.fc19
-----------------
* Wed Sep 26 2012 Brendan Jones <brendan.jones.it@xxxxxxxxx> 1.0.0-5
- Split into framework sub-packages
- Correct package group
* Wed Sep 26 2012 Brendan Jones <brendan.jones.it@xxxxxxxxx> 1.0.0-4
- Correct inclusion of missing binaries BZ: 860458
kmymoney-4.6.3-2.fc18
---------------------
* Fri Sep 21 2012 Rex Dieter <rdieter@xxxxxxxxxxxxxxxxx> 4.6.3-2
- file conflicts between kmymoney and kmymoney-doc (#859495)
* Tue Sep 11 2012 Rex Dieter <rdieter@xxxxxxxxxxxxxxxxx>
- 4.6.3-1
- kmymoney-4.6.3
- -libs: Requires: kdelibs4 ...
- -doc subpkg
lcdf-typetools-2.95-1.fc19
--------------------------
* Wed Sep 26 2012 Parag Nemade <pnemade AT redhat DOT com> - 2.95-1
- Update to next upstream release 2.95
libgee-0.8.0-1.fc19
-------------------
* Wed Sep 26 2012 Michel Salim <salimma@xxxxxxxxxxxxxxxxx> - 0.8.0-1
- Update to 0.8.0
libguestfs-1.19.44-2.fc19
-------------------------
* Tue Sep 25 2012 Richard W.M. Jones <rjones@xxxxxxxxxx> - 1:1.19.44-2
- Enable sVirt (NB: requires libvirt >= 0.10.2-3, selinux-policy >= 3.11.1-23).
- Add upstream patch to label the custom $TMPDIR used in test-launch-race.
libmate-1.4.0-12.fc19
---------------------
* Tue Sep 25 2012 Dan Mashal <dan.mashal@xxxxxxxxxxxxxxxxx> 1.4.0-12
- Clean up pre and post scriptlets
libmatheval-1.1.9-1.fc19
------------------------
* Tue Sep 25 2012 Jon Ciesla <limburgher@xxxxxxxxx> - 1.1.9-1
- 1.1.9, BZ 860367.
libmemcached-1.0.11-2.fc19
--------------------------
* Tue Sep 25 2012 Karsten Hopp <karsten@xxxxxxxxxx> 1.0.11-2
- fix defined but not used variable error on bigendian machines
* Sat Sep 22 2012 Remi Collet <remi@xxxxxxxxxxxxxxxxx> - 1.0.11-1
- update to 1.0.11, soname bump to libmemcached.so.11
- drop broken SASL support
- don't generate parser (bison 2.6 not supported)
libsrtp-1.4.4-6.20101004cvs.fc19
--------------------------------
* Tue Sep 25 2012 Karsten Hopp <karsten@xxxxxxxxxx> 1.4.4-6.20101004cvs
- use __PPC64__, not __ppc64__ which is undefined on PPC64 arch
libteam-0.1-16.20120925gitcc5cddc.fc19
--------------------------------------
* Tue Sep 25 2012 Jiri Pirko <jpirko@xxxxxxxxxx> - 0.1-16.20120925gitcc5cddc
- Rebase to git commit cc5cddc
libwpd-0.9.6-1.fc19
-------------------
* Tue Sep 25 2012 David Tardon <dtardon@xxxxxxxxxx> - 0.9.6-1
- new release
linux-firmware-20120925-0.1.git236367d.fc19
-------------------------------------------
* Tue Sep 25 2012 Josh Boyer <jwboyer@xxxxxxxxxx>
- Update to latest upstream. Adds marvell wifi updates (rhbz 858388)
* Tue Sep 18 2012 Josh Boyer <jwboyer@xxxxxxxxxx>
- Add patch to create libertas subpackages from Daniel Drake (rhbz 853198)
mate-window-manager-1.4.1-9.fc19
--------------------------------
* Tue Sep 25 2012 Dan Mashal <dan.mashal@xxxxxxxxxxxxxxxxx> 1.4.1-9
- Remove mateconf obsolete scriplet
maven-surefire-2.12.3-1.fc19
----------------------------
* Tue Sep 25 2012 Mikolaj Izdebski <mizdebsk@xxxxxxxxxx> - 0:2.12.3-1
- Update to upstream version 2.12.3
mingw-win-iconv-0.0.4-1.fc18
----------------------------
* Fri Sep 21 2012 Kalev Lember <kalevlember@xxxxxxxxx> - 0.0.4-1
- Update to 0.0.4
- Drop upstreamed dllname patch
netpbm-10.59.03-1.fc19
----------------------
* Tue Sep 25 2012 Jindrich Novy <jnovy@xxxxxxxxxx> 10.59.03-1
- update to 10.59.03
- fixes xpmtoppm
ocaml-gettext-0.3.4-6.fc19
--------------------------
* Tue Sep 25 2012 Richard W.M. Jones <rjones@xxxxxxxxxx> - 0.3.4-6
- (RHEL only) Disable camomile, ocaml-ounit, tests.
- Modernize the spec file.
openscap-0.9.0-1.fc19
---------------------
* Tue Sep 25 2012 Peter Vrabec <pvrabec@xxxxxxxxxx> 0.9.0-1
- upgrade
openstack-glance-2012.2-0.6.rc2.fc19
------------------------------------
* Tue Sep 25 2012 Alan Pevec <apevec@xxxxxxxxxx> 2012.2-0.6.rc2
- Update to Folsom rc2
perl-Digest-SHA-5.72-1.fc19
---------------------------
* Wed Sep 26 2012 Petr Pisar <ppisar@xxxxxxxxxx> - 1:5.72-1
- 5.72 bump
perl-Net-SSLeay-1.49-1.fc19
---------------------------
* Tue Sep 25 2012 Paul Howarth <paul@xxxxxxxxxxxx> - 1.49-1
- update to 1.49
- fixed problem where on some platforms test t/local/07_tcpecho.t would bail
out if it could not bind port 1212; it now tries a number of ports to bind
to until successful
- improvements to unsigned casting
- improvements to Net::SSLeay::read to make it easier to use with
non-blocking IO: it modifies Net::SSLeay::read() to return the result from
SSL_read() as the second return value, if Net::SSLeay::read() is called in
list context (its behavior should be unchanged if called in scalar or void
context)
- fixed a problem where t/local/kwalitee.t fails with
Module::CPANTS::Analyse 0.86
- fixed a number of typos
- fixed a compiler warning from Compiling with gcc-4.4 and -Wall
- Fixed problems with get_https4: documentation was wrong, $header_ref was
not correctly set and $server_cert was not returned
- fixed a problem that could cause a Perl exception about no blength method
on undef (CPAN RT#79309)
- added documentation about how to mitigate various SSL/TLS vulnerabilities
- SSL_MODE_* are now available as constants
- drop upstreamed pod encoding patch
perl-Server-Starter-0.12-1.fc19
-------------------------------
* Wed Sep 26 2012 Ralf Corsépius <corsepiu@xxxxxxxxxxxxxxxxx> - 0.12-1
- Upstream update.
- Modernize spec.
perl-Syntax-Highlight-Engine-Kate-0.07-1.fc19
---------------------------------------------
* Tue Sep 25 2012 Marcela Mašláňová <mmaslano@xxxxxxxxxx> - 0.07-1
- 860376 update to 0.07
php-pear-1.9.4-12.fc19
----------------------
* Wed Sep 26 2012 Remi Collet <remi@xxxxxxxxxxxxxxxxx> 1:1.9.4-12
- drop relocate stuff, no more needed
pidgin-2.10.6-4.fc19
--------------------
* Wed Sep 26 2012 Jan Synáček <jsynacek@xxxxxxxxxx> - 2.10.6-4
- Correctly obsolete pidgin-evolution if evolution integration is disabled,
BZ 860285
procps-ng-3.3.3-3.20120807git.fc19
----------------------------------
* Tue Sep 25 2012 Jaromir Capik <jcapik@xxxxxxxxxx> - 3.3.3-3.20120807git
- SELinux spelling fixes (#859900)
python-cinderclient-0.2.26-1.fc19
---------------------------------
* Tue Sep 25 2012 Pádraig Brady <P@xxxxxxxxxxxxxx> 0.2.26-1
- Update to latest client to support latest cinder
python-django-horizon-2012.2-0.9.rc2.fc19
-----------------------------------------
* Tue Sep 25 2012 Matthias Runge <mrunge@xxxxxxxxxx> - 2012-2-0.9.rc2
- remove %post section
python-novaclient-2.8.0.26-2.fc19
---------------------------------
* Tue Sep 25 2012 Pádraig Brady <P@xxxxxxxxxxxxxx> 1:2.8.0.26-2
- Update to latest upstream release
qemu-1.2.0-10.fc19
------------------
* Tue Sep 25 2012 Hans de Goede <hdegoede@xxxxxxxxxx> - 2:1.2.0-9
- Sync Spice patchsets with upstream (rhbz#860238)
- Fix building with usbredir >= 0.5.2
quota-4.01-2.fc19
-----------------
* Tue Sep 25 2012 Petr Pisar <ppisar@xxxxxxxxxx> - 1:4.01-2
- Make group warning message more official
rng-tools-4-2.fc19
------------------
* Tue Sep 25 2012 Jaromir Capik <jcapik@xxxxxxxxxx> - 4-2
- Migration to new systemd macros
rubygem-mustache-0.99.4-6.fc18
------------------------------
* Thu Sep 20 2012 Vít Ondruch <vondruch@xxxxxxxxxx> - 0.99.4-6
- Fix mustache executable for Ruby 1.9.3 (rhbz#859025).
rusers-0.17-70.fc19
-------------------
* Tue Sep 11 2012 Honza Horak <hhorak@xxxxxxxxxx> - 0.17-70
- Minor spec file changes
- Use new systemd macros (Resolves: #850302)
- Use systemd notify messages
rygel-0.16.0-1.fc19
-------------------
* Tue Sep 25 2012 Peter Robinson <pbrobinson@xxxxxxxxxxxxxxxxx> - 0.16.0-1
- 0.16.0 stable release
- http://ftp.gnome.org/pub/GNOME/sources/rygel/0.16/rygel-0.16.0.news
sound-theme-freedesktop-0.8-1.fc19
----------------------------------
* Tue Sep 25 2012 Matthias Clasen <mclasen@xxxxxxxxxx> - 0.8-1
- Update to 0.8
- Drop obsolete Obsoletes
spherical-cow-backgrounds-17.92.0-1.fc19
----------------------------------------
* Tue Sep 25 2012 Martin Sourada <mso@xxxxxxxxxxxxxxxxx> - 17.92.0-1
- Add extras
* Tue Aug 14 2012 Martin Sourada <mso@xxxxxxxxxxxxxxxxx> - 17.91.0-2
- Spec cleanup WRT changes to guideline since we first released
backgrounds package...
splix-2.0.1-0.11.20120419svn.fc19
---------------------------------
* Tue Sep 25 2012 Jiri Popelka <jpopelka@xxxxxxxxxx> - 2.0.1-0.11.20120419svn
- Add Device ID for Samsung ML-2525 (#859669).
sssd-1.9.0-24.fc19
------------------
* Tue Sep 25 2012 Jakub Hrozek <jhrozek@xxxxxxxxxx> - 1.9.0-24
- Use mcpath insted of mcachepath macro to be consistent with
upsteam spec file
* Tue Sep 25 2012 Jakub Hrozek <jhrozek@xxxxxxxxxx> - 1.9.0-23
- New upstream release 1.9.0
sudo-1.8.6p3-1.fc19
-------------------
* Tue Sep 25 2012 Daniel Kopecek <dkopecek@xxxxxxxxxx> - 1.8.6p3-1
- update to 1.8.6p3
- drop -pipelist patch (fixed in upstream)
sugar-memorize-43-1.fc19
------------------------
* Tue Sep 25 2012 Peter Robinson <pbrobinson@xxxxxxxxxxxxxxxxx> - 43-1
- Update to 43
sugar-turtleart-160-1.fc19
--------------------------
* Tue Sep 25 2012 Peter Robinson <pbrobinson@xxxxxxxxxxxxxxxxx> - 160-1
- New 160 release
toped-0.9.81-2.svn2211.fc19
---------------------------
* Tue Sep 25 2012 Ville Skyttä <ville.skytta@xxxxxx> - 0.9.81-2.svn2211
- Build with $RPM_OPT_FLAGS (#679511).
trousers-0.3.10-1.fc19
----------------------
* Tue Sep 25 2012 Steve Grubb <sgrubb@xxxxxxxxxx> 0.3.10-1
- New upstream bug fix release
unicode-ucd-6.2.0-1.fc19
------------------------
* Wed Sep 26 2012 Jens Petersen <petersen@xxxxxxxxxx> - 6.2.0-1
- update to Unicode 6.2
usbredir-0.5.2-1.fc19
---------------------
* Tue Sep 25 2012 Hans de Goede <hdegoede@xxxxxxxxxx> - 0.5.2-1
- Update to upstream 0.5.2 release
vala-0.18.0-1.fc19
------------------
* Tue Sep 25 2012 Kalev Lember <kalevlember@xxxxxxxxx> - 0.18.0-1
- Update to 0.18.0
xorg-x11-drv-wacom-0.17.0-1.fc19
--------------------------------
* Wed Sep 26 2012 Peter Hutterer <peter.hutterer@xxxxxxxxxx> 0.17.0-1
- wacom 0.17.0
ypbind-1.36-6.fc19
------------------
* Mon Sep 24 2012 Honza Horak <hhorak@xxxxxxxxxx> - 3:1.36-6
- Use sdnotify to inform systemd that daemon is ready
- Minor spec file cleanup
- Use new systemd macros
Resolves: #850375
- Add After: NetworkManager-wait-online.service
Related: #846767
* Thu Aug 23 2012 Honza Horak <hhorak@xxxxxxxxxx> - 3:1.36-5
- Enhance ypbind(8) with info about NISTIMEOUT
- Add suggestion about extending NISTIMEOUT if ypbind timeouts
* Mon Jul 23 2012 Honza Horak <hhorak@xxxxxxxxxx> - 3:1.36-4
- Add SIGPIPE to proper signal set
Related: #842228
- Fixed sending TERM signal in ypbind-post-waitbind
yum-langpacks-0.3.0-3.fc19
--------------------------
* Tue Sep 25 2012 Bill Nottingham <notting@xxxxxxxxxx> - 0.3.1-3
- fix traceback on groupremove (#858175)
Summary:
Added Packages: 7
Removed Packages: 0
Upgraded Packages: 72
Compose finisheded at Wed Sep 26 12:48:59 UTC 2012
--
test mailing list
test@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe:
https://admin.fedoraproject.org/mailman/listinfo/test
