[Bug 760177] Review Request: knot - Authoritative DNS server

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Please do not reply directly to this email. All additional
comments should be made in the comments box of this bug.


https://bugzilla.redhat.com/show_bug.cgi?id=760177

--- Comment #14 from Paul Wouters <pwouters@xxxxxxxxxx> 2012-04-22 14:45:52 EDT ---

Review: a few fixes needed, but mostly okay.


Install a valid /etc/knot/knot.conf, not a "sample".

Is it possible to open up /etc/knot a little more so non-root can read zone
files? That is only protect files that can contain secrets.

Use port 53 and not 5353 for knot.conf 

The init script does not handle recompiling zones. Can you look at the nsd
version of the initscripts and do something similar? Perhaps a second service
that starts before the knotd starts?

Basically, after package install "systemctl start knot.service" should result
in a working/running knot daemon, even if with 0 zones and only listing on port
53 of localhost. 

If $OPTIONS should come from /etc/sysconfig/knot can you add that file with
a line #OPTIONS="" to help the user realise that.

The man page refers to info pages? But I don't see those (luckily!)
Upstream should also state in man page that "-i" and not "-d" is the default
(kind of unexpected)


Other then that, the package looks good


Package Review
==============

Key:
- = N/A
x = Pass
! = Fail
? = Not evaluated



==== C/C++ ====
[x]: MUST Header files in -devel subpackage, if present.
[x]: MUST Package does not contain any libtool archives (.la)
[x]: MUST Package does not contain kernel modules.
[x]: MUST Package contains no static executables.
[ ]: MUST Rpath absent or only used for internal libs.
[x]: MUST Package is not relocatable.


==== Generic ====
[x]: MUST Package is licensed with an open-source compatible license and meets
     other legal requirements as defined in the legal section of Packaging
     Guidelines.
[x]: MUST Package successfully compiles and builds into binary rpms on at
     least one supported primary architecture.
[x]: MUST %build honors applicable compiler flags or justifies otherwise.
[x]: MUST All build dependencies are listed in BuildRequires, except for any
     that are listed in the exceptions section of Packaging Guidelines.
[x]: MUST Buildroot is not present
     Note: Unless packager wants to package for EPEL5 this is fine
[x]: MUST Package contains no bundled libraries.
[x]: MUST Changelog in prescribed format.
[x]: MUST Package has no %clean section with rm -rf %{buildroot} (or
     $RPM_BUILD_ROOT)
     Note: Clean would be needed if support for EPEL is required
[x]: MUST Sources contain only permissible code or content.
[x]: MUST %config files are marked noreplace or the reason is justified.
[x]: MUST Each %files section contains %defattr if rpm < 4.4
     Note: Note: defattr macros not found. They would be needed for EPEL5
[-]: MUST Macros in Summary, %description expandable at SRPM build time.
[x]: MUST Package requires other packages for directories it uses.
[x]: MUST Package uses nothing in %doc for runtime.
[x]: MUST Package is not known to require ExcludeArch.
[x]: MUST Permissions on files are set properly.
[x]: MUST Package does not contain duplicates in %files.
[x]: MUST Spec file lacks Packager, Vendor, PreReq tags.
[x]: MUST Package does not run rm -rf %{buildroot} (or $RPM_BUILD_ROOT) at the
     beginning of %install.
     Note: rm -rf would be needed if support for EPEL5 is required
[-]: MUST Large documentation files are in a -doc subpackage, if required.
[x]: MUST If (and only if) the source package includes the text of the
     license(s) in its own file, then that file, containing the text of the
     license(s) for the package is included in %doc.
[x]: MUST License field in the package spec file matches the actual license.
[x]: MUST Package consistently uses macros (instead of hard-coded directory
     names).
[x]: MUST Package is named according to the Package Naming Guidelines.
[x]: MUST No %config files under /usr.
[x]: MUST Package does not generate any conflict.
[x]: MUST Package obeys FHS, except libexecdir and /usr/target.
[x]: MUST Package must own all directories that it creates.
[x]: MUST Package does not own files or directories owned by other packages.
[x]: MUST Package installs properly.
[x]: MUST Requires correct, justified where necessary.
[!]: MUST Rpmlint output is silent.

rpmlint knot-1.0.3-1.fc18.i686.rpm

knot.i686: W: only-non-binary-in-usr-lib
knot.i686: E: non-standard-dir-perm /etc/knot 0644L
1 packages and 0 specfiles checked; 1 errors, 1 warnings.


rpmlint knot-1.0.3-1.fc18.src.rpm

1 packages and 0 specfiles checked; 0 errors, 0 warnings.


rpmlint knot-debuginfo-1.0.3-1.fc18.i686.rpm

1 packages and 0 specfiles checked; 0 errors, 0 warnings.

[x]: MUST Sources used to build the package match the upstream source, as
     provided in the spec URL.
/home/paul/760177/knot-1.0.3.tar.gz :
  MD5SUM this package     : 7e7eec7a71f27760ba64b303c03e09c4
  MD5SUM upstream package : 7e7eec7a71f27760ba64b303c03e09c4

[x]: MUST Spec file is legible and written in American English.
[x]: MUST Spec file name must match the spec package %{name}, in the format
     %{name}.spec.
[ ]: MUST Package contains a SysV-style init script if in need of one.
[x]: MUST File names are valid UTF-8.
[x]: MUST Useful -debuginfo package or justification otherwise.
[x]: SHOULD Reviewer should test that the package builds in mock.
[x]: SHOULD If the source package does not include license text(s) as a
     separate file from upstream, the packager SHOULD query upstream to
     include it.
[x]: SHOULD Dist tag is present.
[ ]: SHOULD No file requires outside of /etc, /bin, /sbin, /usr/bin,
     /usr/sbin.
[x]: SHOULD Final provides and requires are sane (rpm -q --provides and rpm -q
     --requires).
[ ]: SHOULD Package functions as described.
[x]: SHOULD Latest version is packaged.
[x]: SHOULD Package does not include license text files separate from
     upstream.
[x]: SHOULD Scriptlets must be sane, if used.
[x]: SHOULD SourceX is a working URL.
[ ]: SHOULD Description and summary sections in the package spec file contains
     translations for supported Non-English languages, if available.
[ ]: SHOULD Package should compile and build into binary rpms on all supported
     architectures.
[ ]: SHOULD %check is present and all tests pass.
[x]: SHOULD Packages should try to preserve timestamps of original installed
     files.
[x]: SHOULD Spec use %global instead of %define.

Issues:
[!]: MUST Rpmlint output is silent.

rpmlint knot-1.0.3-1.fc18.i686.rpm

knot.i686: W: only-non-binary-in-usr-lib
knot.i686: E: non-standard-dir-perm /etc/knot 0644L
1 packages and 0 specfiles checked; 1 errors, 1 warnings.


rpmlint knot-1.0.3-1.fc18.src.rpm

1 packages and 0 specfiles checked; 0 errors, 0 warnings.


rpmlint knot-debuginfo-1.0.3-1.fc18.i686.rpm

1 packages and 0 specfiles checked; 0 errors, 0 warnings.


See: http://fedoraproject.org/wiki/Packaging/Guidelines#rpmlint


Generated by fedora-review 0.1.3
External plugins:

-- 
Configure bugmail: https://bugzilla.redhat.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.
_______________________________________________
package-review mailing list
package-review@xxxxxxxxxxxxxxxxxxxxxxx
https://admin.fedoraproject.org/mailman/listinfo/package-review



[Index of Archives]     [Fedora Legacy]     [Fedora Desktop]     [Fedora SELinux]     [Yosemite News]     [KDE Users]     [Fedora Tools]