[Bug 651123] Review Request: sarGraphs - Graphical System Usage Web Interface

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Please do not reply directly to this email. All additional
comments should be made in the comments box of this bug.


https://bugzilla.redhat.com/show_bug.cgi?id=651123

--- Comment #6 from Jeffrey Ness <jness@xxxxxxxxxxxxxxxx> 2010-11-09 11:27:26 EST ---
(In reply to comment #5)
> (In reply to comment #2)
> > Hi Jeffrey
> > 
> > your package will not build as it presently stands.
> > 
> > Please be sure to install rpmdevtools and follow all the guidelines here to
> > build your Fedora package:
> > http://fedoraproject.org/wiki/How_to_create_an_RPM_package
> > and here
> > http://fedoraproject.org/wiki/Packaging/Guidelines
> > 
> > A few things in particular:
> > - your LICENSE file in your source states GPLv2 whereas you have specified GPL
> > in the spec file
> > - you need to specify the full URL of your Source0
> > - your release number should start at 1 not 0
> > - you cannot unpack files into /opt when you are building packages in your spec
> > file (you should not be installing anything under /opt in any case). The line
> > 'setup -q' will unpack the source named under Source0 for you into
> > ~/rpmbuild/BUILD/%{name}-%{version} where your package is built. Everything in
> > the spec file is executed relative to here. In your case you could omit the
> > %build section and simply move the required files from this area to your
> > buildroot in your %install section.
> > - your %post is better suited to a README file
> > - you will also need to clean up your files section, including adding a %doc
> > line to include your license file and any other documents you wish to be
> > included in the package such as AUTHOR, README - refer to the links above
> > 
> > Once you've attacked those things and can successfully build your package using
> > rpmbuild be sure to run rpmlint against the generated src package and post thre
> > results back here.
> > 
> > hope that helps,
> > 
> > Brendan
> 
> Hello Brendan,
> 
> Thank you very much for this information, it has been very useful in my
> entering of the RPM development scene. 
> 
> I have been re-rewriting my SPEC file and took in your considerations above:
> 
> Spec URL: http://flip-edesign.com/source/sarGraphs-1.1-1.spec
> SRPM URL: http://flip-edesign.com/source/sarGraphs-1.1-1.src.rpm
> 
> --
> 
> I have also found the 'rpmlint' tool to be a great asset, below you can find
> the current results:
> 
> rpmlint ../SRPMS/sarGraphs-1.1-1.src.rpm 
> sarGraphs.src: W: summary-not-capitalized sarGraphs takes the output of sysstat
> and creates a graphical PHP Web interface.
> sarGraphs.src: W: summary-ended-with-dot sarGraphs takes the output of sysstat
> and creates a graphical PHP Web interface.
> sarGraphs.src: W: name-repeated-in-summary sarGraphs
> sarGraphs.src: E: invalid-spec-name
> sarGraphs.src:24: E: files-attr-not-set
> sarGraphs.src:25: E: files-attr-not-set
> sarGraphs.src: W: no-cleaning-of-buildroot %install
> sarGraphs.src: W: no-cleaning-of-buildroot %clean
> sarGraphs.src: W: no-buildroot-tag
> sarGraphs.src: W: no-%build-section
> sarGraphs.src: W: no-%clean-section
> 1 packages and 0 specfiles checked; 3 errors, 8 warnings.
> --
> 
> I believe the 3 errors can be over looked. I do not need to set the default
> file attributes, and I believe my SPEC file naming convention matches that of
> http://fedoraproject.org/wiki/Packaging/Guidelines#Naming. As for the warnings
> nothing stands out to something I would need to correct.
> 
> I'm going to attempt to build on the Fedora Build system , however at the
> moment it seems the site 'https://koji.fedoraproject.org/koji/login' is under
> high load. I will attempt one of these mock builds when the site is available.
> 
> Thanks
> Jeffrey-

Greetings,

I have been able to run this Source RPM on the Build system, unfortunately it
failed. While checking the build.log I get this message below (failed to write
to /usr/share):

+ /bin/cp -a /builddir/build/BUILD/sarGraphs-1.1 /usr/share
/bin/cp: cannot create directory `/usr/share/sarGraphs-1.1': Permission denied
error: Bad exit status from /var/tmp/rpm-tmp.89564 (%install)

--

I guess I'm abit confused at this point, how would I go about moving my source
from the RPM to its final resting place?

Thanks for any advise.
Jeffrey-

-- 
Configure bugmail: https://bugzilla.redhat.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.
_______________________________________________
package-review mailing list
package-review@xxxxxxxxxxxxxxxxxxxxxxx
https://admin.fedoraproject.org/mailman/listinfo/package-review


[Index of Archives]     [Fedora Legacy]     [Fedora Desktop]     [Fedora SELinux]     [Yosemite News]     [KDE Users]     [Fedora Tools]