Re: [389-users] SSH AllowGroups and LDAP authentication

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Again, try listing them all on one line.  SSH is probably only looking at one of them.

From man sshd_config:

AllowGroups

This keyword can be followed by a list of group name patterns,
separated by spaces.


On 11/17/2010 12:08 PM, Allan Hougham wrote:
Hi Patrick,
 
This is my sshd_conf, and my groups:
 
AllowGroups root ref
AllowGroups Bids ref
AllowGroups Search ref
 
 
Thanks in advance
 
 
 
 
#       $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $
# This is the sshd server system-wide configuration file.  See
# sshd_config(5) for more information.
# This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin
# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented.  Uncommented options change a
# default value.
Port 22
#Protocol 2,1
Protocol 2
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::
# HostKey for protocol version 1
#HostKey /etc/ssh/ssh_host_key
# HostKeys for protocol version 2
#HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_dsa_key
# Lifetime and size of ephemeral version 1 server key
#KeyRegenerationInterval 1h
#ServerKeyBits 768
# Logging
# obsoletes QuietMode and FascistLogging
#SyslogFacility AUTH
SyslogFacility AUTHPRIV
#LogLevel INFO
LogLevel DEBUG
# Authentication:
#LoginGraceTime 2m
LoginGraceTime 1m
PermitRootLogin yes
#PermitRootLogin no
#StrictModes yes
#MaxAuthTries 6
MaxAuthTries 6
 
AllowGroups root ref
AllowGroups Bids ref
AllowGroups Search ref
 
RSAAuthentication yes
PubkeyAuthentication yes
AuthorizedKeysFile      .ssh/authorized_keys
# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#RhostsRSAAuthentication no
# similar for protocol version 2
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# RhostsRSAAuthentication and HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes
# To disable tunneled clear text passwords, change to no here!
#PasswordAuthentication yes
PermitEmptyPasswords no
PasswordAuthentication yes
# Change to no to disable s/key passwords
#ChallengeResponseAuthentication yes
ChallengeResponseAuthentication no
# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no
# GSSAPI options
#GSSAPIAuthentication no
#GSSAPIAuthentication yes
#GSSAPICleanupCredentials yes
# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the ChallengeResponseAuthentication mechanism.
# Depending on your PAM configuration, this may bypass the setting of
# PasswordAuthentication, PermitEmptyPasswords, and
# "PermitRootLogin without-password". If you just want the PAM account and
# session checks to run without PAM authentication, then enable this but set
# ChallengeResponseAuthentication=no
#UsePAM no
UsePAM yes
# Accept locale-related environment variables
#AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
#AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
#AcceptEnv LC_IDENTIFICATION LC_ALL
#AllowTcpForwarding yes
AllowTcpForwarding yes
#GatewayPorts no
#X11Forwarding no
X11Forwarding no
#X11DisplayOffset 10
#X11UseLocalhost yes
#PrintMotd yes
#PrintLastLog yes
#TCPKeepAlive yes
#UseLogin no
#UsePrivilegeSeparation yes
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
#ShowPatchLevel no
#UseDNS yes
#PidFile /var/run/sshd.pid
#MaxStartups 10
#PermitTunnel no
# no default banner path
#Banner /some/path
# override default of no subsystems
Subsystem       sftp    /usr/libexec/openssh/sftp-server
 

 

Date: Tue, 16 Nov 2010 10:15:22 -0800
From: patrick.morris@xxxxxx
To: 389-users@xxxxxxxxxxxxxxxxxxxxxxx
Subject: Re: [389-users] SSH AllowGroups and LDAP authentication

On 11/15/2010 10:00 AM, Allan Hougham wrote:
Hi,
 
I need autenticate LDAPs Groups, but I can´t
Anybody can working with this feature? or mapping users with groups and later configuring the LDAP Client?
What are the steps for setting LDAP Clients with LDAP Groups?

Did you see my last reply on this? I'm pretty sure you'd specified AllowGroups incorrectly in your SSH configuration.

Assuming you have your groups set up correctly and SSH is using PAM, there is no difference between configuring SSH to use LDAP groups and configuring it to use local ones.

-- 389 users mailing list 389-users@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/389-users

--
389 users mailing list
389-users@xxxxxxxxxxxxxxxxxxxxxxx
https://admin.fedoraproject.org/mailman/listinfo/389-users

[Index of Archives]     [Fedora Directory Users]     [Fedora Directory Devel]     [Fedora Announce]     [Fedora Legacy Announce]     [Kernel]     [Fedora Legacy]     [Share Photos]     [Fedora Desktop]     [PAM]     [Red Hat Watch]     [Red Hat Development]     [Big List of Linux Books]     [Gimp]     [Yosemite News]

  Powered by Linux