Roland Schwingel wrote: > > Hi... > > First I have to say, that I am completely new to 389ds and (mostly) > also to LDAP. > > But I want to setup an 389ds environment. I think I have managed to > compile 389ds > for OpenSuse 11.2. I am using OpenSuse as of the fact I am in a closed > network > with no access to the internet. So I have to use a distribution which > makes it > possible to install packages from the DVD. I find package management in > a closed environment with OS much easier as with FC or ubuntu which all > require internet access. Someone else on the list has built packages for OpenSuse - search the list archives for opensuse. > > So, I believe I got everything compiled from sources on my OS, which > was more > complicated then I expected. I also walked thru to setup-ds-admin.pl. > ns-slapd and adminserver are running. >From what I can see is my (empty) > ns-slapd is running fine. > > I use the 389ds adminserver on top of an apache 2.2.14 and I got some > trouble with the adminserver. I had to tweak the LoadModules sections > in the adminserver's httpd.conf. They appear to belong to an older apache > version. I mostly removed all entries here. > > Problem 1: Webpages > When I open the adminserver webpage (http://<myhost>:9830) and click on > "Fedora Administration Express" I get an (mostly) empty page justs > reading: > NMC_Status: 1 > NMC_ErrType: > NMC_ErrInfo: > NMC_ErrDetail: > Does anybody know what this means and what might be broken here? Probably what happened is that due to the apache config problem you ran into above, setup-ds-admin.pl did not complete successfully, and so nothing is going to work properly. Unless you can get to the point where setup-ds-admin.pl runs successfully with no errors, you will have lots of problems that will be hard to get rid of. > > Problem 2: Adminserver console > Here I get a lot of errormessages when trying to click something in the > "Tasks" Tab. The only thing that appears to work is "Restart Server". > When I click eg. "Configure Admin Server" I get an alertpanel from java: > It is titled "Remote Request Error" and its content is: > URL: http://<myhost>:9830/admin-serv/tasks/Configuration/ServerSetup > Status: Failure > From the adminserver's access.log I see that there is a HTTP POST to > this URL but it seems to succeed. Responsecode is 200. > There are also some repeatign suspicous entries in the error.log: > [client <client-ip-adress>] admserv_host_ip_check: ap_get_remote_host > could not resolve <client-ip-adress> > where <client-ip-adress> is the ip adress of the host where the > console is running on. > From what I can see is my DNS setup ok. my client host is resolveable > forward > and also backward. Any ideas on this issues? > > Thanks for your help, > > Roland > ------------------------------------------------------------------------ > > -- > 389 users mailing list > 389-users@xxxxxxxxxxxxxxxxxxxxxxx > https://admin.fedoraproject.org/mailman/listinfo/389-users > -- 389 users mailing list 389-users@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/389-users
