Your configure options are wrong, I'm surprised it didn't complain about it.You don't have a space between the directory in --enable-gssapi and --enable-static.
Do a: gmake distclean in the cyrus-sasl directory and re-do the configure and make again.
rob Richard Megginson wrote:
There is still no libsasl2.a. I'm not sure what the problem is. Try using "make" instead of "gmake" - perhaps gmake is slightly different on your OS/version?Jason Kullo Sam wrote:Ok...guess I have to get this build going after all. Getting halfway through the make, then failing with the following error. Doh!Attacked the cyrus install again. Did a make clean, then changed my mind and deleted entire folder and started all over with it. For some reason, the sasl make seemed to go this time(maybe I just needed to blow the folder out last time)...but, the make on ldapserver still failed. See below for log(snipped out bits of spam...) On the bright side...I'm actually learning lots! =D==================================================================== [root@genie ds]# gunzip -c cyrus-sasl-2.1.20.tar.gz | tar xf - tar: Read 2048 bytes from - [root@genie ds]# cd cyrus-sasl-2.1.20[root@genie cyrus-sasl-2.1.20]# CFLAGS="-O2" ./configure --enable-gssapi=/usr/kerberos/include/--enable-static --without-des --without-opensslconfigure: creating cache ./config.cache checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking target system type... i686-pc-linux-gnu -------------------- SNIP Successful Config updating cache .././config.cache configure: creating ./config.status config.status: creating Makefile config.status: creating saslauthd.h config.status: executing depfiles commands Configuration Complete. Type 'make' to build. [root@genie cyrus-sasl-2.1.20]# ########################## Onto the make... ########################## Configuration Complete. Type 'make' to build. [root@genie cyrus-sasl-2.1.20]# gmake gmake all-recursivegmake[1]: Entering directory `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20'Making all in includegmake[2]: Entering directory `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/include' if gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -W -O2 -MT makemd5.o -MD -MP -MF ".deps/makemd5.Tpo" \-c -o makemd5.o `test -f 'makemd5.c' || echo './'`makemd5.c; \ then mv ".deps/makemd5.Tpo" ".deps/makemd5.Po"; \ else rm -f ".deps/makemd5.Tpo"; exit 1; \ fi/bin/sh ../libtool --mode=link gcc -Wall -W -O2 -o makemd5 makemd5.o -lresolvmkdir .libs ------------------- SNIP Make spam ----------------------------if gcc -DHAVE_CONFIG_H -DSASLAUTHD_CONF_FILE_DEFAULT=\"/usr/local/etc/saslauthd.conf\" -I. -I. -I.. -I. -I. -I. -I./include -I./include -I./../include -O2 -MT saslauthd-main.o -MD -MP -MF ".deps/saslauthd-main.Tpo" \ -c -o saslauthd-main.o `test -f 'saslauthd-main.c' || echo './'`saslauthd-main.c; \then mv ".deps/saslauthd-main.Tpo" ".deps/saslauthd-main.Po"; \ else rm -f ".deps/saslauthd-main.Tpo"; exit 1; \ fiif gcc -DHAVE_CONFIG_H -DSASLAUTHD_CONF_FILE_DEFAULT=\"/usr/local/etc/saslauthd.conf\" -I. -I. -I.. -I. -I. -I. -I./include -I./include -I./../include -O2 -MT md5.o -MD -MP -MF ".deps/md5.Tpo" \-c -o md5.o `test -f 'md5.c' || echo './'`md5.c; \ then mv ".deps/md5.Tpo" ".deps/md5.Po"; \ else rm -f ".deps/md5.Tpo"; exit 1; \ figcc -O2 -o saslauthd mechanisms.o auth_dce.o auth_getpwent.o auth_krb5.o auth_krb4.o auth_pam.o auth_rimap.o auth_shadow.o auth_sia.o auth_sasldb.o lak.o auth_ldap.o cache.o utils.o ipc_unix.o ipc_doors.o saslauthd-main.o md5.o -lcrypt -lresolv -lresolv gmake[3]: Leaving directory `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/saslauthd' gmake[2]: Leaving directory `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/saslauthd' gmake[2]: Entering directory `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20' gmake[2]: Leaving directory `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20' gmake[1]: Leaving directory `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20' [root@genie cyrus-sasl-2.1.20]# #######################################Seems to have compiled right that time for some reason...weird... #######################################[root@genie cyrus-sasl-2.1.20]# cd ..[root@genie ds]# ls 09.23 icu-2.4.tgz 09.27 ldapserver cyrus-sasl-2.1.20 mozilla cyrus-sasl-2.1.20.tar.gz mozilla-components.tar.gz db-4.2.52.NC net-snmp-5.2.1 db-4.2.52.NC.tar.gz net-snmp-5.2.1.tar.gz fedora-adminutil-devel-7.1 patch.4.2.52.1 fedora-adminutil-devel-7.1.tar.gz patch.4.2.52.2 fedora-setuputil-devel-7.1 patch.4.2.52.3 fedora-setuputil-devel-7.1.tar.gz patch.4.2.52.4 icu [root@genie ds]# cd ldapserver/[root@genie ldapserver]# gmake USE_PERL_FROM_PATH=1 BUILD_DEBUG=optimize if test ! -d Linux; then mkdir Linux; fi;/usr/bin/perl buildnum.pl -p Linux NSOS_RELEASE is: 2.6 /usr/bin/perl pumpkin.pl 120 pumpkin.dat The components are up to date ==== Starting LDAP Server ========== gmake BUILD_OPT=1 NO_JAVA=1 nsCommon gmake[1]: Entering directory `/root/Desktop/dsbuild-static/ds/ldapserver' -------------------------- SNIP Make Spam.o ../../../built/Linux-domestic-optimize-normal-slapd/servers/obj/main.o -L../../../built/release/slapd/Linux-domestic-optimize-normal-slapd/bin/slapd/server -lslapd -lldapu -L../../../../mozilla/dist/Linux2.6_x86_glibc_PTH_OPT.OBJ/lib -lssl3 -lnss3 -lsoftokn3 -L../../../../mozilla/dist/lib -lssldap50 -lldap50 -lprldap50 -L../../../../mozilla/dist/Linux2.6_x86_glibc_PTH_OPT.OBJ/lib -lplc4 -lplds4 -lnspr4 -L../../../../mozilla/dist/Linux2.6_x86_glibc_PTH_OPT.OBJ/lib -ldbm -lavl -lldif -llitekey -ldl -L../../../../mozilla/dist/Linux2.6_x86_glibc_PTH_OPT.OBJ/lib -lsvrcore -L../../../../cyrus-sasl-2.1.20/lib -lsasl2 -L/usr/kerberos/lib -lgssapi_krb5 -lcrypt -lpthread -L../../../../db-4.2.52.NC/built/.libs -ldb-4.2/usr/bin/ld: cannot find -lsasl2 collect2: ld returned 1 exit statusgmake[3]: *** [../../../built/release/slapd/Linux-domestic-optimize-normal-slapd/bin/slapd/server/ns-slapd] Error 1 gmake[3]: Leaving directory `/root/Desktop/dsbuild-static/ds/ldapserver/ldap/servers/slapd'gmake[2]: *** [_slapd] Error 2gmake[2]: Leaving directory `/root/Desktop/dsbuild-static/ds/ldapserver/ldap/servers'gmake[1]: *** [ldapprogs] Error 2gmake[1]: Leaving directory `/root/Desktop/dsbuild-static/ds/ldapserver/ldap'gmake: *** [buildDirectory] Error 2 [root@genie ldapserver]# ls ../cyrus-sasl-2.1.20/lib auxprop.c client.lo dlopen.o Makefile.in saslutil.o auxprop.lo client.o external.c md5.c server.c auxprop.o common.c external.lo md5.lo server.lo canonusr.c common.lo external.o md5.o server.o canonusr.lo common.o getaddrinfo.c NTMakefile seterror.c canonusr.o config.c getnameinfo.c plugin_common.lo seterror.lo checkpw.c config.lo getsubopt.c plugin_common.o seterror.o checkpw.lo config.o libsasl2.la saslint.h snprintf.c checkpw.o dlopen.c Makefile saslutil.c staticopen.h client.c dlopen.lo Makefile.am saslutil.lo windlopen.c[root@genie ldapserver]# -- Fedora-directory-users mailing listFedora-directory-users@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/fedora-directory-users------------------------------------------------------------------------ -- Fedora-directory-users mailing list Fedora-directory-users@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/fedora-directory-users
Attachment:
smime.p7s
Description: S/MIME Cryptographic Signature
-- Fedora-directory-users mailing list Fedora-directory-users@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/fedora-directory-users
