Here is a 'dmesg' from the F9-Preview Live CD boot sequence:
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.25-0.234.rc9.git1.fc9.i686 (mockbuild@) (gcc version
4.3.0 20080404 (Red Hat 4.3.0-6) (GCC) ) #1 SMP Tue Apr 15 18:37:15 EDT 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000098800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable)
BIOS-e820: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS)
BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
Warning only 4GB will be used.
Use a HIGHMEM64G enabled kernel.
3200MB HIGHMEM available.
896MB LOWMEM available.
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00f56e0] 000f56e0
Using x86 segment limits to approximate NX protection
Entering add_active_range(0, 0, 1048576) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 1048576
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 1048576
On node 0 totalpages: 1048576
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 6400 pages used for memmap
HighMem zone: 812800 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
DMI 2.4 present.
Using APIC driver default
ACPI: RSDP 000F70D0, 0014 (r0 GBT )
ACPI: RSDT CFEE3000, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
ACPI: FACP CFEE3040, 0074 (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
ACPI: DSDT CFEE30C0, 66F8 (r1 GBT GBTUACPI 1000 MSFT 3000000)
ACPI: FACS CFEE0000, 0040
ACPI: SSDT CFEE9880, 0544 (r1 PTLTD POWERNOW 1 LTP 1)
ACPI: HPET CFEE9E00, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 98)
ACPI: MCFG CFEE9E40, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
ACPI: APIC CFEE97C0, 0084 (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
ATI board detected. Disabling timer routing over 8254.
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 0:2 APIC version 16
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 0:2 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Processor #2 0:2 APIC version 16
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
Processor #3 0:2 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at d0000000 (gap: cff00000:10100000)
PM: Registered nosave memory: 0000000000098000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1040384
Kernel command line: initrd=initrd0.img
root=CDLABEL=Fedora-9-PR-i686-20080416 rootfstype=iso9660 ro quiet
liveimg rhgb BOOT_IMAGE=vmlinuz0
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07b8000 soft=c0798000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2511.490 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3362780k/4194304k available (2234k kernel code, 42704k reserved,
1119k data, 284k init, 2489216k highmem)
virtual kernel memory layout:
fixmap : 0xffc53000 - 0xfffff000 (3760 kB)
pkmap : 0xff400000 - 0xff800000 (4096 kB)
vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc074e000 - 0xc0795000 ( 284 kB)
.data : 0xc062ea6d - 0xc0746800 (1119 kB)
.text : 0xc0400000 - 0xc062ea6d (2234 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
hpet clockevent registered
Calibrating delay using timer specific routine.. 5025.86 BogoMIPS
(lpj=2512932)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0(4) -> Core 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20070126
CPU0: AMD Phenom(tm) 9850 Quad-Core Processor stepping 03
Booting processor 1/1 ip 4000
CPU 1 irqstacks, hard=c07b9000 soft=c0799000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5022.85 BogoMIPS
(lpj=2511426)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1(4) -> Core 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: AMD Phenom(tm) 9850 Quad-Core Processor stepping 03
Booting processor 2/2 ip 4000
CPU 2 irqstacks, hard=c07ba000 soft=c079a000
Initializing CPU#2
Calibrating delay using timer specific routine.. 5022.85 BogoMIPS
(lpj=2511426)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 2(4) -> Core 3
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#2.
CPU2: AMD Phenom(tm) 9850 Quad-Core Processor stepping 03
Booting processor 3/3 ip 4000
CPU 3 irqstacks, hard=c07bb000 soft=c079b000
Initializing CPU#3
Calibrating delay using timer specific routine.. 5022.84 BogoMIPS
(lpj=2511421)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 3(4) -> Core 2
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#3.
CPU3: AMD Phenom(tm) 9850 Quad-Core Processor stepping 03
Total of 4 processors activated (20094.41 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 4 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=340 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=492 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=176 bytes
sizeof(task_struct)=3712 bytes
CPU0 attaching sched-domain:
domain 0: span 0000000f
groups: 00000001 00000002 00000004 00000008
CPU1 attaching sched-domain:
domain 0: span 0000000f
groups: 00000002 00000004 00000008 00000001
CPU2 attaching sched-domain:
domain 0: span 0000000f
groups: 00000004 00000008 00000001 00000002
CPU3 attaching sched-domain:
domain 0: span 0000000f
groups: 00000008 00000001 00000002 00000004
net_namespace: 548 bytes
Booting paravirtualized kernel on bare hardware
Time: 23:37:58 Date: 04/20/08
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
00:0c: mem resource (0xe0000000-0xefffffff) overlaps 0000:00:00.0 BAR 3
(0xe0000000-0xffffffff), disabling
00:0d: mem resource (0xffff0000-0xffffffff) overlaps 0000:00:00.0 BAR 3
(0xe0000000-0xffffffff), disabling
00:0d: mem resource (0xfec00000-0xfec00fff) overlaps 0000:00:00.0 BAR 3
(0xe0000000-0xffffffff), disabling
00:0d: mem resource (0xfee00000-0xfee00fff) overlaps 0000:00:00.0 BAR 3
(0xe0000000-0xffffffff), disabling
00:0d: mem resource (0xfff80000-0xfffeffff) overlaps 0000:00:00.0 BAR 3
(0xe0000000-0xffffffff), disabling
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
PCI: Cannot allocate resource region 3 of device 0000:00:00.0
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 32-bit timers, 14318180 Hz
ACPI: RTC can wake from S4
Switched to high resolution mode on CPU 0
system 00:01: ioport range 0x4d0-0x4d1 has been reserved
system 00:01: ioport range 0x220-0x225 has been reserved
system 00:01: ioport range 0x290-0x294 has been reserved
system 00:02: ioport range 0x4100-0x411f has been reserved
system 00:02: ioport range 0x228-0x22f has been reserved
system 00:02: ioport range 0x40b-0x40b has been reserved
system 00:02: ioport range 0x4d6-0x4d6 has been reserved
system 00:02: ioport range 0xc00-0xc01 has been reserved
system 00:02: ioport range 0xc14-0xc14 has been reserved
system 00:02: ioport range 0xc50-0xc52 has been reserved
system 00:02: ioport range 0xc6c-0xc6d has been reserved
system 00:02: ioport range 0xc6f-0xc6f has been reserved
system 00:02: ioport range 0xcd0-0xcd1 has been reserved
system 00:02: ioport range 0xcd2-0xcd3 has been reserved
system 00:02: ioport range 0xcd4-0xcdf has been reserved
system 00:02: ioport range 0x4000-0x40fe has been reserved
system 00:02: ioport range 0x4210-0x4217 has been reserved
system 00:02: ioport range 0xb00-0xb1f could not be reserved
system 00:02: ioport range 0x238-0x23f has been reserved
system 00:0d: iomem range 0xdf000-0xdffff has been reserved
system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved
system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved
system 00:0d: iomem range 0xfc000-0xfffff could not be reserved
system 00:0d: iomem range 0xcfee0000-0xcfefffff could not be reserved
system 00:0d: iomem range 0x0-0x9ffff could not be reserved
system 00:0d: iomem range 0x100000-0xcfedffff could not be reserved
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 2
Switched to high resolution mode on CPU 3
PCI: Bridge: 0000:00:02.0
IO window: b000-bfff
MEM window: 0xfa000000-0xfcffffff
PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
PCI: Bridge: 0000:00:05.0
IO window: a000-afff
MEM window: 0xfd700000-0xfd8fffff
PREFETCH window: 0x00000000fdf00000-0x00000000fdffffff
PCI: Bridge: 0000:00:07.0
IO window: e000-efff
MEM window: 0xfde00000-0xfdefffff
PREFETCH window: 0x00000000fdd00000-0x00000000fddfffff
PCI: Bridge: 0000:00:09.0
IO window: d000-dfff
MEM window: 0xfdc00000-0xfdcfffff
PREFETCH window: 0x00000000fdb00000-0x00000000fdbfffff
PCI: Bridge: 0000:00:0a.0
IO window: c000-cfff
MEM window: 0xfda00000-0xfdafffff
PREFETCH window: 0x00000000fd900000-0x00000000fd9fffff
PCI: Bridge: 0000:00:14.4
IO window: 9000-9fff
MEM window: 0xfd600000-0xfd6fffff
PREFETCH window: 0x00000000fd500000-0x00000000fd5fffff
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:00:05.0 to 64
PCI: Setting latency timer of device 0000:00:07.0 to 64
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0a.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 4404k freed
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
audit: initializing netlink socket (disabled)
type=2000 audit(1208734677.659:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
PCI: Setting latency timer of device 0000:00:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
PCI: Setting latency timer of device 0000:00:05.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:05.0:pcie00]
PCI: Setting latency timer of device 0000:00:07.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:07.0:pcie00]
PCI: Setting latency timer of device 0000:00:09.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:09.0:pcie00]
PCI: Setting latency timer of device 0000:00:0a.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0a.0:pcie00]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: ACPI0007:01 is registered as cooling_device1
ACPI: ACPI0007:02 is registered as cooling_device2
ACPI: ACPI0007:03 is registered as cooling_device3
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Magic number: 4:512:656
Freeing unused kernel memory: 284k freed
Write protecting the kernel read-only data: 908k
SCSI subsystem initialized
Driver 'sr' needs updating - please use bus_type methods
loop: module loaded
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
libata version 3.00 loaded.
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.25-0.234.rc9.git1.fc9.i686 ohci_hcd
usb usb1: SerialNumber: 0000:00:13.0
ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.25-0.234.rc9.git1.fc9.i686 ohci_hcd
usb usb2: SerialNumber: 0000:00:13.1
ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.2: OHCI Host Controller
ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
input: ImPS/2 Generic Wheel Mouse as
/devices/platform/i8042/serio1/input/input2
usb 1-1: new full speed USB device using ohci_hcd and address 2
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.25-0.234.rc9.git1.fc9.i686 ohci_hcd
usb usb3: SerialNumber: 0000:00:13.2
ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.3: OHCI Host Controller
ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.25-0.234.rc9.git1.fc9.i686 ohci_hcd
usb usb4: SerialNumber: 0000:00:13.3
ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.4: OHCI Host Controller
ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
usb 1-1: configuration #1 chosen from 1 choice
usb 1-1: New USB device found, idVendor=0930, idProduct=6540
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: USB Flash Memory
usb 1-1: SerialNumber: 0B11FA6131E118DC
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.25-0.234.rc9.git1.fc9.i686 ohci_hcd
usb usb5: SerialNumber: 0000:00:13.4
sata_mv 0000:02:00.0: version 1.20
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
sata_mv: Highpoint RocketRAID BIOS CORRUPTS DATA on all attached drives,
regardless of if/how they are configured. BEWARE!
sata_mv: For data safety, do not use sectors 8-9 on "Legacy" drives, and
avoid the final two gigabytes on all RocketRAID BIOS initialized drives.
sata_mv 0000:02:00.0: Applying 60X1C0 workarounds to unknown rev
sata_mv 0000:02:00.0: Gen-IIE 32 slots 4 ports SCSI mode IRQ via INTx
PCI: Setting latency timer of device 0000:02:00.0 to 64
scsi0 : sata_mv
scsi1 : sata_mv
scsi2 : sata_mv
scsi3 : sata_mv
ata1: SATA max UDMA/133 mmio m1048576@0xfd700000 port 0xfd722000 irq 17
ata2: SATA max UDMA/133 mmio m1048576@0xfd700000 port 0xfd724000 irq 17
ata3: SATA max UDMA/133 mmio m1048576@0xfd700000 port 0xfd726000 irq 17
ata4: SATA max UDMA/133 mmio m1048576@0xfd700000 port 0xfd728000 irq 17
Initializing USB Mass Storage driver...
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: Hitachi HDP725025GLA380, GM2OA50E, max UDMA/133
ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: Hitachi HDP725025GLA380, GM2OA50E, max UDMA/133
ata2.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: Hitachi HDP725025GLA380, GM2OA50E, max UDMA/133
ata3.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
ata4: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access ATA Hitachi HDP72502 GM2O PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access ATA Hitachi HDP72502 GM2O PQ: 0 ANSI: 5
scsi 2:0:0:0: Direct-Access ATA Hitachi HDP72502 GM2O PQ: 0 ANSI: 5
ACPI: PCI Interrupt 0000:06:0e.0[A] -> GSI 22 (level, low) -> IRQ 22
ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.5: EHCI Host Controller
ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 6
ehci_hcd 0000:00:13.5: debug port 1
ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000
usb 1-1: USB disconnect, address 2
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda:<6>ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 10 ports detected
sda1
sd 0:0:0:0: [sda] Attached SCSI disk
sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
sd 2:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 2:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sdc: sdc1
sd 2:0:0:0: [sdc] Attached SCSI disk
firewire_ohci: Added fw-ohci device 0000:06:0e.0, OHCI version 1.10
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: EHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.25-0.234.rc9.git1.fc9.i686 ehci_hcd
usb usb6: SerialNumber: 0000:00:13.5
ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt for device 0000:00:14.1 disabled
PCI: Enabling device 0000:04:00.1 (0000 -> 0001)
ACPI: PCI Interrupt 0000:04:00.1[B] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:04:00.1 to 64
ACPI: PCI interrupt for device 0000:04:00.1 disabled
PCI: Enabling device 0000:05:00.1 (0000 -> 0001)
ACPI: PCI Interrupt 0000:05:00.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:05:00.1 to 64
ACPI: PCI interrupt for device 0000:05:00.1 disabled
ahci 0000:00:12.0: version 3.0
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
ahci 0000:00:12.0: controller can't do PMP, turning off CAP_PMP
usb 6-1: new high speed USB device using ehci_hcd and address 2
usb 6-1: configuration #1 chosen from 1 choice
scsi5 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usb 6-1: New USB device found, idVendor=0930, idProduct=6540
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 6-1: Product: USB Flash Memory
usb 6-1: SerialNumber: 0B11FA6131E118DC
firewire_core: created device fw0: GUID 00ce110600001a4d, S400
ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum part
scsi6 : ahci
scsi7 : ahci
scsi8 : ahci
scsi9 : ahci
ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
ata7: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
ata8: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: HPA detected: current 488395055, native 488397168
ata5.00: ATA-8: Hitachi HDP725025GLA380, GM2OA50E, max UDMA/133
ata5.00: 488395055 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
ata5.00: configured for UDMA/133
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: ATA-7: Hitachi HDT725050VLA360, V56OA7EA, max UDMA/133
ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata6.00: SB600 AHCI: limiting to 255 sectors per cmd
ata6.00: SB600 AHCI: limiting to 255 sectors per cmd
ata6.00: configured for UDMA/133
ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7.00: HPA detected: current 488395055, native 488397168
ata7.00: ATA-8: Hitachi HDP725025GLA380, GM2OA50E, max UDMA/133
ata7.00: 488395055 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata7.00: SB600 AHCI: limiting to 255 sectors per cmd
ata7.00: SB600 AHCI: limiting to 255 sectors per cmd
ata7.00: configured for UDMA/133
ata8: SATA link down (SStatus 0 SControl 300)
scsi 6:0:0:0: Direct-Access ATA Hitachi HDP72502 GM2O PQ: 0 ANSI: 5
sd 6:0:0:0: [sdd] 488395055 512-byte hardware sectors (250058 MB)
sd 6:0:0:0: [sdd] Write Protect is off
sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 6:0:0:0: [sdd] 488395055 512-byte hardware sectors (250058 MB)
sd 6:0:0:0: [sdd] Write Protect is off
sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sdd: sdd1
sd 6:0:0:0: [sdd] Attached SCSI disk
scsi 7:0:0:0: Direct-Access ATA Hitachi HDT72505 V56O PQ: 0 ANSI: 5
sd 7:0:0:0: [sde] 976773168 512-byte hardware sectors (500108 MB)
sd 7:0:0:0: [sde] Write Protect is off
sd 7:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 7:0:0:0: [sde] 976773168 512-byte hardware sectors (500108 MB)
sd 7:0:0:0: [sde] Write Protect is off
sd 7:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sde:
sd 7:0:0:0: [sde] Attached SCSI disk
scsi 8:0:0:0: Direct-Access ATA Hitachi HDP72502 GM2O PQ: 0 ANSI: 5
sd 8:0:0:0: [sdf] 488395055 512-byte hardware sectors (250058 MB)
sd 8:0:0:0: [sdf] Write Protect is off
sd 8:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 8:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 8:0:0:0: [sdf] 488395055 512-byte hardware sectors (250058 MB)
sd 8:0:0:0: [sdf] Write Protect is off
sd 8:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 8:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sdf: sdf1
sd 8:0:0:0: [sdf] Attached SCSI disk
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part
PCI: Setting latency timer of device 0000:04:00.0 to 64
scsi10 : ahci
scsi11 : ahci
ata9: SATA max UDMA/133 abar m8192@0xfdcfe000 port 0xfdcfe100 irq 17
ata10: SATA max UDMA/133 abar m8192@0xfdcfe000 port 0xfdcfe180 irq 17
ata9: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:04:00.1[B] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:04:00.1 to 64
scsi12 : pata_jmicron
scsi13 : pata_jmicron
ata11: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 18
ata12: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 18
usb-storage: device scan complete
scsi 5:0:0:0: Direct-Access USB Flash Memory 6.50 PQ: 0
ANSI: 0 CCS
scsi 5:0:0:1: CD-ROM USB Flash Memory 6.50 PQ: 0 ANSI: 0
sd 5:0:0:0: [sdg] 3894975 512-byte hardware sectors (1994 MB)
sd 5:0:0:0: [sdg] Write Protect is off
sd 5:0:0:0: [sdg] Mode Sense: 45 00 00 08
sd 5:0:0:0: [sdg] Assuming drive cache: write through
sd 5:0:0:0: [sdg] 3894975 512-byte hardware sectors (1994 MB)
sd 5:0:0:0: [sdg] Write Protect is off
sd 5:0:0:0: [sdg] Mode Sense: 45 00 00 08
sd 5:0:0:0: [sdg] Assuming drive cache: write through
sdg: sdg1
sd 5:0:0:0: [sdg] Attached SCSI removable disk
sr0: scsi3-mmc drive: 8x/40x writer xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:1: Attached scsi CD-ROM sr0
sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 5:0:0:1: [sr0] Sense Key : No Sense [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
end_request: I/O error, dev sr0, sector 33664
Buffer I/O error on device sr0, logical block 8416
sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 5:0:0:1: [sr0] Sense Key : No Sense [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
end_request: I/O error, dev sr0, sector 33668
Buffer I/O error on device sr0, logical block 8417
sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 5:0:0:1: [sr0] Sense Key : No Sense [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
end_request: I/O error, dev sr0, sector 33664
Buffer I/O error on device sr0, logical block 8416
sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 5:0:0:1: [sr0] Sense Key : No Sense [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
end_request: I/O error, dev sr0, sector 33668
Buffer I/O error on device sr0, logical block 8417
sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 5:0:0:1: [sr0] Sense Key : No Sense [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
end_request: I/O error, dev sr0, sector 33832
Buffer I/O error on device sr0, logical block 8458
sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 5:0:0:1: [sr0] Sense Key : No Sense [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
end_request: I/O error, dev sr0, sector 33836
Buffer I/O error on device sr0, logical block 8459
sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 5:0:0:1: [sr0] Sense Key : No Sense [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
end_request: I/O error, dev sr0, sector 33832
Buffer I/O error on device sr0, logical block 8458
sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 5:0:0:1: [sr0] Sense Key : No Sense [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
end_request: I/O error, dev sr0, sector 33836
Buffer I/O error on device sr0, logical block 8459
sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 5:0:0:1: [sr0] Sense Key : No Sense [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
end_request: I/O error, dev sr0, sector 33848
Buffer I/O error on device sr0, logical block 8462
sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 5:0:0:1: [sr0] Sense Key : No Sense [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
end_request: I/O error, dev sr0, sector 33848
Buffer I/O error on device sr0, logical block 8462
sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 5:0:0:1: [sr0] Sense Key : No Sense [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
end_request: I/O error, dev sr0, sector 33848
sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 5:0:0:1: [sr0] Sense Key : No Sense [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
end_request: I/O error, dev sr0, sector 33848
sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 5:0:0:1: [sr0] Sense Key : No Sense [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
end_request: I/O error, dev sr0, sector 33848
sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 5:0:0:1: [sr0] Sense Key : No Sense [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
end_request: I/O error, dev sr0, sector 33848
sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 5:0:0:1: [sr0] Sense Key : No Sense [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
end_request: I/O error, dev sr0, sector 33848
sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 5:0:0:1: [sr0] Sense Key : No Sense [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
end_request: I/O error, dev sr0, sector 33784
sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 5:0:0:1: [sr0] Sense Key : No Sense [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
end_request: I/O error, dev sr0, sector 33788
sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 5:0:0:1: [sr0] Sense Key : No Sense [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
end_request: I/O error, dev sr0, sector 33840
sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 5:0:0:1: [sr0] Sense Key : No Sense [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
end_request: I/O error, dev sr0, sector 33844
sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 5:0:0:1: [sr0] Sense Key : No Sense [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
end_request: I/O error, dev sr0, sector 33848
sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 5:0:0:1: [sr0] Sense Key : No Sense [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
end_request: I/O error, dev sr0, sector 33848
ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
PCI: Setting latency timer of device 0000:05:00.0 to 64
scsi14 : ahci
scsi15 : ahci
ata13: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe100 irq 18
ata14: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe180 irq 18
ata13: SATA link down (SStatus 0 SControl 300)
ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata14.00: ATA-7: HDT722516DLAT80, V43OA96A, max UDMA/133
ata14.00: 321672960 sectors, multi 0: LBA48
ata14.00: applying bridge limits
ata14.00: configured for UDMA/100
scsi 15:0:0:0: Direct-Access ATA HDT722516DLAT80 V43O PQ: 0
ANSI: 5
sd 15:0:0:0: [sdh] 321672960 512-byte hardware sectors (164697 MB)
sd 15:0:0:0: [sdh] Write Protect is off
sd 15:0:0:0: [sdh] Mode Sense: 00 3a 00 00
sd 15:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 15:0:0:0: [sdh] 321672960 512-byte hardware sectors (164697 MB)
sd 15:0:0:0: [sdh] Write Protect is off
sd 15:0:0:0: [sdh] Mode Sense: 00 3a 00 00
sd 15:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sdh: sdh1 sdh2 sdh3
sd 15:0:0:0: [sdh] Attached SCSI disk
ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:05:00.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:05:00.1 to 64
scsi16 : pata_atiixp
scsi17 : pata_jmicron
scsi18 : pata_atiixp
ata15: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
ata16: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
scsi19 : pata_jmicron
ata17: PATA max UDMA/100 cmd 0xcf00 ctl 0xce00 bmdma 0xcb00 irq 19
ata18: PATA max UDMA/100 cmd 0xcd00 ctl 0xcc00 bmdma 0xcb08 irq 19
ata15.00: ATAPI: LITE-ON DVDRW LH-20A1H, LL07, max UDMA/66
ata15.01: HPA detected: current 321670847, native 321672960
ata15.01: ATA-7: HDT722516DLAT80, V43OA96A, max UDMA/133
ata15.01: 321670847 sectors, multi 16: LBA48
ata15.00: limited to UDMA/33 due to 40-wire cable
ata15.00: configured for UDMA/33
ata15.01: configured for UDMA/100
scsi 16:0:0:0: CD-ROM LITE-ON DVDRW LH-20A1H LL07 PQ: 0
ANSI: 5
sr1: scsi3-mmc drive: 24x/48x writer dvd-ram cd/rw xa/form2 cdda tray
sr 16:0:0:0: Attached scsi CD-ROM sr1
scsi 16:0:1:0: Direct-Access ATA HDT722516DLAT80 V43O PQ: 0
ANSI: 5
sd 16:0:1:0: [sdi] 321670847 512-byte hardware sectors (164695 MB)
sd 16:0:1:0: [sdi] Write Protect is off
sd 16:0:1:0: [sdi] Mode Sense: 00 3a 00 00
sd 16:0:1:0: [sdi] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 16:0:1:0: [sdi] 321670847 512-byte hardware sectors (164695 MB)
sd 16:0:1:0: [sdi] Write Protect is off
sd 16:0:1:0: [sdi] Mode Sense: 00 3a 00 00
sd 16:0:1:0: [sdi] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sdi: sdi1 sdi2 sdi3
sd 16:0:1:0: [sdi] Attached SCSI disk
ISO 9660 Extensions: Microsoft Joliet Level 3
Unable to load NLS charset utf8
Unable to load NLS charset utf8
ISO 9660 Extensions: RRIP_1991A
squashfs: version 3.3 (2007/10/31) Phillip Lougher
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised:
dm-devel@xxxxxxxxxx
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
printk: 11 messages suppressed.
type=1404 audit(1208734698.516:2): enforcing=1 old_enforcing=0
auid=4294967295 ses=4294967295
SELinux:8192 avtab hash slots allocated. Num of rules:172102
SELinux:8192 avtab hash slots allocated. Num of rules:172102
security: 8 users, 12 roles, 2300 types, 115 bools, 1 sens, 1024 cats
security: 72 classes, 172102 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext3), uses xattr
inode_doinit_with_dentry: no dentry for dev=dm-0 ino=11905
inode_doinit_with_dentry: no dentry for dev=dm-0 ino=10972
inode_doinit_with_dentry: no dentry for dev=dm-0 ino=10971
SELinux: initialized (dev loop2, type squashfs), not configured for labeling
SELinux: initialized (dev loop0, type squashfs), not configured for labeling
SELinux: initialized (dev sr1, type iso9660), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses
genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: policy loaded with handle_unknown=allow
type=1403 audit(1208734699.380:3): policy loaded auid=4294967295
ses=4294967295
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: Attached scsi generic sg3 type 0
sd 7:0:0:0: Attached scsi generic sg4 type 0
sd 8:0:0:0: Attached scsi generic sg5 type 0
sd 5:0:0:0: Attached scsi generic sg6 type 0
sr 5:0:0:1: Attached scsi generic sg7 type 5
sd 15:0:0:0: Attached scsi generic sg8 type 0
sr 16:0:0:0: Attached scsi generic sg9 type 5
sd 16:0:1:0: Attached scsi generic sg10 type 0
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
ACPI: Power Button (CM) [PWRB]
sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 5:0:0:1: [sr0] Sense Key : No Sense [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
end_request: I/O error, dev sr0, sector 33664
Buffer I/O error on device sr0, logical block 8416
sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 5:0:0:1: [sr0] Sense Key : No Sense [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
end_request: I/O error, dev sr0, sector 33668
Buffer I/O error on device sr0, logical block 8417
sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 5:0:0:1: [sr0] Sense Key : No Sense [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
end_request: I/O error, dev sr0, sector 33664
sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 5:0:0:1: [sr0] Sense Key : No Sense [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
end_request: I/O error, dev sr0, sector 33668
sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 5:0:0:1: [sr0] Sense Key : No Sense [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
end_request: I/O error, dev sr0, sector 33832
sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 5:0:0:1: [sr0] Sense Key : No Sense [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
end_request: I/O error, dev sr0, sector 33836
sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 5:0:0:1: [sr0] Sense Key : No Sense [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
end_request: I/O error, dev sr0, sector 33832
sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 5:0:0:1: [sr0] Sense Key : No Sense [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
end_request: I/O error, dev sr0, sector 33836
sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 5:0:0:1: [sr0] Sense Key : No Sense [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
end_request: I/O error, dev sr0, sector 33848
sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 5:0:0:1: [sr0] Sense Key : No Sense [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
end_request: I/O error, dev sr0, sector 33848
sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 5:0:0:1: [sr0] Sense Key : No Sense [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
end_request: I/O error, dev sr0, sector 33848
sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 5:0:0:1: [sr0] Sense Key : No Sense [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
end_request: I/O error, dev sr0, sector 33848
sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 5:0:0:1: [sr0] Sense Key : No Sense [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
end_request: I/O error, dev sr0, sector 33848
sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 5:0:0:1: [sr0] Sense Key : No Sense [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
end_request: I/O error, dev sr0, sector 33848
sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 5:0:0:1: [sr0] Sense Key : No Sense [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
end_request: I/O error, dev sr0, sector 33848
sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 5:0:0:1: [sr0] Sense Key : No Sense [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
end_request: I/O error, dev sr0, sector 33784
sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 5:0:0:1: [sr0] Sense Key : No Sense [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
end_request: I/O error, dev sr0, sector 33788
sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 5:0:0:1: [sr0] Sense Key : No Sense [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
end_request: I/O error, dev sr0, sector 33840
sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 5:0:0:1: [sr0] Sense Key : No Sense [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
end_request: I/O error, dev sr0, sector 33844
sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 5:0:0:1: [sr0] Sense Key : No Sense [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
end_request: I/O error, dev sr0, sector 33848
sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 5:0:0:1: [sr0] Sense Key : No Sense [current]
sr 5:0:0:1: [sr0] Add. Sense: No additional sense information
end_request: I/O error, dev sr0, sector 33848
r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:03:00.0 to 64
eth0: RTL8168b/8111b at 0xf8be2000, 00:1a:4d:5e:f6:36, XID 38000000 IRQ 218
ACPI: WMI: Mapper loaded
piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
input: PC Speaker as /devices/platform/pcspkr/input/input5
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
ppdev: user-space parallel port driver
ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
ALSA sound/pci/hda/hda_intel.c:1810: chipset global capabilities = 0x4401
ALSA sound/pci/hda/hda_intel.c:749: codec_mask = 0x8
hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
ALSA sound/pci/hda/hda_codec.c:2857: autoconfig: line_outs=4
(0x14/0x15/0x16/0x17/0x0)
ALSA sound/pci/hda/hda_codec.c:2861: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:2865: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:2866: mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:2874: inputs: mic=0x18, fmic=0x19,
line=0x1a, fline=0x0, cd=0x0, aux=0x0
ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Headphone
Playback Volume, skipped
ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Speaker Playback
Volume, skipped
ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Mono Playback
Volume, skipped
ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Line-Out Playback
Volume, skipped
ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Speaker Playback
Switch, skipped
ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Mono Playback
Switch, skipped
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on dm-0, internal journal
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses
genfs_contexts
powernow-k8: Found 1 AMD Phenom(tm) 9850 Quad-Core Processor processors
(4 cpu cores) (version 2.20.00)
powernow-k8: 0 : pstate 0 (2500 MHz)
powernow-k8: 1 : pstate 1 (1250 MHz)
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
fuse init (API version 7.9)
SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.9
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: BNEP (Ethernet Emulation) ver 1.2
Bluetooth: BNEP filters: protocol multicast
Bridge firewalling registered
pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
r8169: eth0: link up
r8169: eth0: link up
hda-intel: Invalid position buffer, using LPIB read method instead.
eth0: no IPv6 routers present
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
SELinux: initialized (dev sdg1, type vfat), uses genfs_contexts
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
atkbd.c: Unknown key released (translated set 2, code 0xe0 on
isa0060/serio0).
atkbd.c: Use 'setkeycodes e060 <keycode>' to make it known.
--
fedora-devel-list mailing list
fedora-devel-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/fedora-devel-list
