I have recently upgrade the kernel to 3094 and I the wifi with wpa now works for a few seconds :-) wpa_supplicant works, dhclient works, I am able to open a page or two and then the network stops. dmesg shows: Loading module: rt2x00lib - CVS (N/A) by http://rt2x00.serialmonkey.com. Loading module: rt73usb - CVS (N/A) by http://rt2x00.serialmonkey.com. usbcore: registered new interface driver rt73usb Loading module: rt2500usb - CVS (N/A) by http://rt2x00.serialmonkey.com. usbcore: registered new interface driver rt2500usb wmaster0: Selected rate control algorithm 'simple' ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: Initial auth_alg=0 wlan0: authenticate with AP 00:10:18:90:20:db wlan0: RX authentication from 00:10:18:90:20:db (alg=0 transaction=2 status=0) wlan0: authenticated wlan0: associate with AP 00:10:18:90:20:db wlan0: RX AssocResp from 00:10:18:90:20:db (capab=0x411 status=0 aid=2) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: duplicate address detected! rt73usb->rt2x00_vendor_request: Error - vendor request error. Request 0x07 failed for offset 0x308c with error -110. rt73usb->rt2x00_vendor_request: Error - vendor request error. Request 0x06 failed for offset 0x308c with error -110. rt73usb->rt2x00_vendor_request: Error - vendor request error. Request 0x07 failed for offset 0x308c with error -110. rt73usb->rt2x00_vendor_request: Error - vendor request error. Request 0x07 failed for offset 0x308c with error -110. rt73usb->rt2x00_vendor_request: Error - vendor request error. Request 0x07 failed for offset 0x308c with error -110. rt73usb->rt2x00_vendor_request: Error - vendor request error. Request 0x07 failed for offset 0x308c with error -110. rt73usb->rt2x00_vendor_request: Error - vendor request error. Request 0x07 failed for offset 0x308c with error -110. rt73usb->rt2x00_bbp_read: Error - PHY_CSR3 register busy. Read failed. rt73usb->rt2x00_vendor_request: Error - vendor request error. Request 0x07 failed for offset 0x308c with error -110. rt73usb->rt2x00_vendor_request: Error - vendor request error. Request 0x06 failed for offset 0x308c with error -110. rt73usb->rt2x00_vendor_request: Error - vendor request error. Request 0x07 failed for offset 0x308c with error -110. rt73usb->rt2x00_vendor_request: Error - vendor request error. Request 0x06 failed for offset 0x308c with error -110. rt73usb->rt2x00_vendor_request: Error - vendor request error. Request 0x07 failed for offset 0x308c with error -110. rt73usb->rt2x00_vendor_request: Error - vendor request error. Request 0x07 failed for offset 0x308c with error -110. rt73usb->rt2x00_vendor_request: Error - vendor request error. Request 0x07 failed for offset 0x308c with error -110. rt73usb->rt2x00_vendor_request: Error - vendor request error. Request 0x07 failed for offset 0x308c with error -110. rt73usb->rt2x00_vendor_request: Error - vendor request error. Request 0x07 failed for offset 0x308c with error -110. rt73usb->rt2x00_bbp_read: Error - PHY_CSR3 register busy. Read failed. rt73usb->rt2x00_vendor_request: Error - vendor request error. Request 0x07 failed for offset 0x308c with error -110. rt73usb->rt2x00_vendor_request: Error - vendor request error. Request 0x06 failed for offset 0x308c with error -110. wlan0: No ProbeResp from current AP 00:10:18:90:20:db - assume out of range Thanks, Rafael -- fedora-devel-list mailing list fedora-devel-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/fedora-devel-list
