Start wit CD-ROM with this options: linux askmethod vnc vncconnect=myhost linux vesa linux vesa askmethod (install from NFS server) linux Anaconda ask me ip in text mode the IP and nfs host, then start X. X start but not show Welcome messages, the mouse move the X cursor but none appear an I can't procede with setup. I switch to CTR+ALT+F2, the ps -fea show a process of anaconda witch use all CPU.... See log attach .... Now I am installing fc5 and all work great. If someone send me some suggest, some boot options, ecc. I can test it Many thanks to all -- Dario Lesca <d.lesca@xxxxxxxxxx>
00:00.0 Host bridge: Intel Corporation E7230/3000/3010 Memory Controller Hub (rev 81) Subsystem: Compaq Computer Corporation Unknown device 3200 Flags: bus master, fast devsel, latency 0 Capabilities: [e0] Vendor Specific Information 00:01.0 PCI bridge: Intel Corporation E7230/3000/3010 PCI Express Root Port (rev 81) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=06, sec-latency=0 Memory behind bridge: fdf00000-fdffffff Capabilities: [88] #0d [0000] Capabilities: [80] Power Management version 2 Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+ Capabilities: [a0] Express Root Port (Slot+) IRQ 0 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Capabilities: [40] Express Root Port (Slot-) IRQ 0 Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+ Capabilities: [90] #0d [0000] Capabilities: [a0] Power Management version 2 00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5 (rev 01) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Capabilities: [40] Express Root Port (Slot-) IRQ 0 Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+ Capabilities: [90] #0d [0000] Capabilities: [a0] Power Management version 2 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Unknown device 31fe Flags: bus master, medium devsel, latency 0, IRQ 169 I/O ports at 1000 [size=32] 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Unknown device 31fe Flags: bus master, medium devsel, latency 0, IRQ 209 I/O ports at 1020 [size=32] 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Unknown device 31fe Flags: bus master, medium devsel, latency 0, IRQ 217 I/O ports at 1040 [size=32] 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Unknown device 31fe Flags: bus master, medium devsel, latency 0, IRQ 225 I/O ports at 1060 [size=32] 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Unknown device 31fe Flags: bus master, medium devsel, latency 0, IRQ 169 Memory at fddf0000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 00002000-00003fff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000f0000000-00000000f7f00000 Capabilities: [50] #0d [0000] 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) Flags: bus master, medium devsel, latency 0 Capabilities: [e0] Vendor Specific Information 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP]) Subsystem: Hewlett-Packard Company Unknown device 31fe Flags: bus master, medium devsel, latency 0, IRQ 7 I/O ports at <ignored> I/O ports at <ignored> I/O ports at <ignored> I/O ports at <ignored> I/O ports at 0500 [size=16] 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE (rev 01) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Hewlett-Packard Company Unknown device 31fe Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 209 I/O ports at 1080 [size=8] I/O ports at 1088 [size=4] I/O ports at 1090 [size=8] I/O ports at 1098 [size=4] I/O ports at 10a0 [size=16] Memory at fdde0000 (32-bit, non-prefetchable) [size=1K] Capabilities: [70] Power Management version 2 01:03.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02) (prog-if 00 [VGA]) Subsystem: Hewlett-Packard Company Unknown device 31fb Flags: bus master, stepping, medium devsel, latency 64, IRQ 5 Memory at f0000000 (32-bit, prefetchable) [size=128M] I/O ports at 3000 [size=256] Memory at fdef0000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at fde80000 [disabled] [size=128K] Capabilities: [50] Power Management version 2 01:04.0 System peripheral: Compaq Computer Corporation Integrated Lights Out Controller (rev 03) Subsystem: Hewlett-Packard Company Unknown device 3304 Flags: medium devsel, IRQ 11 I/O ports at 2800 [size=256] Memory at fdee0000 (32-bit, non-prefetchable) [size=512] Capabilities: [f0] Power Management version 3 01:04.2 System peripheral: Compaq Computer Corporation Integrated Lights Out Processor (rev 03) Subsystem: Hewlett-Packard Company Unknown device 3304 Flags: bus master, medium devsel, latency 64, IRQ 10 I/O ports at 3400 [size=256] Memory at fded0000 (32-bit, non-prefetchable) [size=2K] Memory at fdec0000 (32-bit, non-prefetchable) [size=8K] Memory at fde00000 (32-bit, non-prefetchable) [size=512K] [virtual] Expansion ROM at fdea0000 [disabled] [size=64K] Capabilities: [f0] Power Management version 3 01:04.4 USB Controller: Hewlett-Packard Company Unknown device 3300 (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Unknown device 3304 Flags: bus master, medium devsel, latency 64, IRQ 233 I/O ports at 3800 [size=32] Capabilities: [f0] Power Management version 3 04:00.0 PCI bridge: Broadcom EPB PCI-Express to PCI-X Bridge (rev b5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=04, secondary=05, subordinate=06, sec-latency=64 Memory behind bridge: fdf00000-fdffffff Capabilities: [60] Express PCI/PCI-X Bridge IRQ 0 Capabilities: [90] PCI-X bridge device Capabilities: [b0] Power Management version 2 05:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5714 Gigabit Ethernet (rev a3) Subsystem: Hewlett-Packard Company NC324i PCIe Dual Port Gigabit Server Adapter Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 50 Memory at fdff0000 (64-bit, non-prefetchable) [size=64K] Memory at fdfe0000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] PCI-X non-bridge device Capabilities: [48] Power Management version 2 Capabilities: [50] Vital Product Data Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable+ 05:04.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5714 Gigabit Ethernet (rev a3) Subsystem: Hewlett-Packard Company NC324i PCIe Dual Port Gigabit Server Adapter Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 209 Memory at fdfd0000 (64-bit, non-prefetchable) [size=64K] Memory at fdfc0000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] PCI-X non-bridge device Capabilities: [48] Power Management version 2 Capabilities: [50] Vital Product Data Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable- 05:08.0 PCI bridge: Broadcom HT1000 PCI/PCI-X bridge (rev b4) (prog-if 00 [Normal decode]) Flags: bus master, 66MHz, medium devsel, latency 64 Bus: primary=05, secondary=06, subordinate=06, sec-latency=64 Capabilities: [90] PCI-X bridge device
/proc on /proc type proc (rw) /dev on /dev type tmpfs (rw) /dev/pts on /dev/pts type devpts (rw) /sys on /sys type sysfs (rw) none on /tmp type ramfs (rw) none on /tmp/ramfs type ramfs (rw) /proc/bus/usb on /proc/bus/usb type usbfs (rw) lesca:/u/fc6 on /mnt/source type nfs (ro,vers=3,rsize=32768,wsize=32768,hard,nolock,proto=udp,timeo=7,retrans=3,sec=sys,addr=lesca) /tmp/loop0 on /mnt/runtime type squashfs (ro) /selinux on /selinux type selinuxfs (rw) lesca:/u/master on /tmp/m type nfs (ro,vers=3,rsize=32768,wsize=32768,hard,nolock,proto=udp,timeo=7,retrans=3,sec=sys,addr=lesca)
UID PID PPID C STIME TTY TIME CMD root 1 0 0 14:35 tty1 00:00:01 /init askmethod vnc root 2 1 0 14:35 ? 00:00:00 [migration/0] root 3 1 0 14:35 ? 00:00:00 [ksoftirqd/0] root 4 1 0 14:35 ? 00:00:00 [watchdog/0] root 5 1 0 14:35 ? 00:00:00 [migration/1] root 6 1 0 14:35 ? 00:00:00 [ksoftirqd/1] root 7 1 0 14:35 ? 00:00:00 [watchdog/1] root 8 1 0 14:35 ? 00:00:00 [events/0] root 9 1 0 14:35 ? 00:00:00 [events/1] root 10 1 0 14:35 ? 00:00:00 [khelper] root 11 1 0 14:35 ? 00:00:00 [kthread] root 15 11 0 14:35 ? 00:00:00 [kblockd/0] root 16 11 0 14:35 ? 00:00:00 [kblockd/1] root 17 11 0 14:35 ? 00:00:00 [kacpid] root 104 11 0 14:35 ? 00:00:00 [cqueue/0] root 105 11 0 14:35 ? 00:00:00 [cqueue/1] root 108 11 0 14:35 ? 00:00:00 [khubd] root 110 11 0 14:35 ? 00:00:00 [kseriod] root 170 11 0 14:35 ? 00:00:00 [pdflush] root 171 11 0 14:35 ? 00:00:00 [pdflush] root 172 11 0 14:35 ? 00:00:00 [kswapd0] root 173 11 0 14:35 ? 00:00:00 [aio/0] root 174 11 0 14:35 ? 00:00:00 [aio/1] root 322 11 0 14:35 ? 00:00:00 [kpsmoused] root 337 1 0 14:35 tty1 00:00:00 /init askmethod vnc root 338 1 0 14:35 tty1 00:00:02 /sbin/loader root 580 11 0 14:36 ? 00:00:00 [ata/0] root 581 11 0 14:36 ? 00:00:00 [ata/1] root 582 11 0 14:36 ? 00:00:00 [ata_aux] root 589 11 0 14:36 ? 00:00:00 [scsi_eh_0] root 590 11 0 14:36 ? 00:00:00 [scsi_eh_1] root 605 11 0 14:37 ? 00:00:00 [rpciod/0] root 606 11 0 14:37 ? 00:00:00 [rpciod/1] root 607 1 0 14:37 ? 00:00:00 [loop0] root 612 338 0 14:37 tty2 00:00:00 -/bin/sh root 670 11 0 14:37 ? 00:00:00 [jfsIO] root 671 11 0 14:37 ? 00:00:00 [jfsCommit] root 672 11 0 14:37 ? 00:00:00 [jfsCommit] root 673 11 0 14:37 ? 00:00:00 [jfsSync] root 679 11 0 14:37 ? 00:00:00 [xfslogd/0] root 680 11 0 14:37 ? 00:00:00 [xfslogd/1] root 681 11 0 14:37 ? 00:00:00 [xfsdatad/0] root 682 11 0 14:37 ? 00:00:00 [xfsdatad/1] root 699 11 0 14:37 ? 00:00:00 [kmirrord] root 710 11 0 14:37 ? 00:00:00 [kmpathd/0] root 711 11 0 14:37 ? 00:00:00 [kmpathd/1] root 724 338 98 14:37 tty1 00:17:48 /usr/bin/python /usr/bin/anaconda -m nfs://mnt/source/. --vnc --vncconnect lesca --graphical --selinux --lang it_IT.UTF-8 --keymap it root 727 724 0 14:37 tty1 00:00:00 /usr/bin/python /usr/bin/anaconda -m nfs://mnt/source/. --vnc --vncconnect lesca --graphical --selinux --lang it_IT.UTF-8 --keymap it root 728 11 0 14:37 ? 00:00:00 [kauditd] root 729 724 0 14:37 tty1 00:00:00 //usr/bin/Xvnc :1 -nevershared -depth 16 -geometry 800x600 IdleTimeout=0 -auth /dev/null -once DisconnectClients=false desktop=Installazione di Fedora Core 6 su host 192.168.50.61 SecurityTypes=None root 731 724 0 14:37 tty1 00:00:00 //usr/bin/mini-wm --display :1 root 732 724 0 14:37 tty1 00:00:00 /usr/bin/python /usr/bin/anaconda -m nfs://mnt/source/. --vnc --vncconnect lesca --graphical --selinux --lang it_IT.UTF-8 --keymap it root 733 732 0 14:46 tty1 00:00:00 /usr/bin/python /usr/bin/anaconda -m nfs://mnt/source/. --vnc --vncconnect lesca --graphical --selinux --lang it_IT.UTF-8 --keymap it root 734 733 0 14:46 tty1 00:00:00 /bin/sh root 765 734 0 14:55 tty1 00:00:00 ps -fea
Attachment:
syslog
Description: Binary data
Xvnc Free Edition 4.1.2 Copyright (C) 2002-2005 RealVNC Ltd. See http://www.realvnc.com for information on VNC. Underlying X server release 70100000, The X.Org Foundation Tue Oct 31 14:37:23 2006 vncext: VNC extension running! vncext: Listening for VNC connections on port 5901 vncext: created VNC server for screen 0 Could not init font path element /usr/share/X11/fonts/TTF/, removing from list! Could not init font path element /usr/share/X11/fonts/OTF, removing from list! Could not init font path element /usr/share/X11/fonts/Type1/, removing from list! Could not init font path element /usr/share/X11/fonts/CID/, removing from list! Could not init font path element /usr/share/X11/fonts/100dpi/, removing from list! Could not init font path element /usr/share/X11/fonts/75dpi/, removing from list! Connections: accepted: 192.168.50.90::5500 Tue Oct 31 14:37:24 2006 SConnection: Client needs protocol version 3.8 SConnection: Client requests security type None(1) VNCSConnST: Server default pixel format depth 16 (16bpp) little-endian rgb565 VNCSConnST: Client pixel format depth 6 (8bpp) rgb222
etLabel: Initializing <6>NetLabel: domain hash size = 128 <6>NetLabel: protocols = UNLABELED CIPSOv4 <6>NetLabel: unlabeled traffic allowed by default <6>pnp: 00:01: ioport range 0x408-0x40f has been reserved <6>pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved <6>PCI: Bridge: 0000:05:08.0 <6> IO window: disabled. <6> MEM window: disabled. <6> PREFETCH window: disabled. <6>PCI: Bridge: 0000:04:00.0 <6> IO window: disabled. <6> MEM window: fdf00000-fdffffff <6> PREFETCH window: disabled. <6>PCI: Bridge: 0000:00:01.0 <6> IO window: disabled. <6> MEM window: fdf00000-fdffffff <6> PREFETCH window: disabled. <6>PCI: Bridge: 0000:00:1c.0 <6> IO window: disabled. <6> MEM window: disabled. <6> PREFETCH window: disabled. <6>PCI: Bridge: 0000:00:1c.4 <6> IO window: disabled. <6> MEM window: disabled. <6> PREFETCH window: disabled. <6>PCI: Bridge: 0000:00:1e.0 <6> IO window: 2000-3fff <6> MEM window: fde00000-fdefffff <6> PREFETCH window: f0000000-f7ffffff <6>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169 <7>PCI: Setting latency timer of device 0000:00:01.0 to 64 <7>PCI: Setting latency timer of device 0000:04:00.0 to 64 <6>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 <7>PCI: Setting latency timer of device 0000:00:1c.0 to 64 <6>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169 <7>PCI: Setting latency timer of device 0000:00:1c.4 to 64 <7>PCI: Setting latency timer of device 0000:00:1e.0 to 64 <6>NET: Registered protocol family 2 <4>IP route cache hash table entries: 32768 (order: 5, 131072 bytes) <4>TCP established hash table entries: 131072 (order: 9, 2621440 bytes) <4>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes) <6>TCP: Hash tables configured (established 131072 bind 65536) <6>TCP reno registered <6>apm: BIOS not found. <6>audit: initializing netlink socket (disabled) <5>audit(1162305354.988:1): initialized <4>highmem bounce pool size: 64 pages <4>Total HugeTLB memory allocated, 0 <5>VFS: Disk quotas dquot_6.5.1 <4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>SELinux: Registering netfilter hooks <6>Initializing Cryptographic API <4>ksign: Installing public key data <4>Loading keyring <4>- Added public key EAA0802BFF323905 <4>- User ID: Red Hat, Inc. (Kernel Module GPG key) <6>io scheduler noop registered <6>io scheduler anticipatory registered <6>io scheduler deadline registered <6>io scheduler cfq registered (default) <7>PCI: Setting latency timer of device 0000:00:01.0 to 64 <4>assign_interrupt_mode Found MSI capability <7>Allocate Port Service[0000:00:01.0:pcie00] <7>PCI: Setting latency timer of device 0000:00:1c.0 to 64 <4>assign_interrupt_mode Found MSI capability <7>Allocate Port Service[0000:00:1c.0:pcie00] <7>PCI: Setting latency timer of device 0000:00:1c.4 to 64 <4>assign_interrupt_mode Found MSI capability <7>Allocate Port Service[0000:00:1c.4:pcie00] <4>ACPI (exconfig-0455): Dynamic SSDT Load - OemId [HP ] OemTableId [ SSDT0] [20060707] <4>ACPI (exconfig-0455): Dynamic SSDT Load - OemId [HP ] OemTableId [ SSDT1] [20060707] <4>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] <3>ACPI: Getting cpuindex for acpiid 0x2 <4>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] <3>ACPI: Getting cpuindex for acpiid 0x3 <4>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] <3>ACPI: Getting cpuindex for acpiid 0x4 <4>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] <3>ACPI: Getting cpuindex for acpiid 0x5 <4>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] <3>ACPI: Getting cpuindex for acpiid 0x2 <4>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] <3>ACPI: Getting cpuindex for acpiid 0x3 <6>ACPI: Thermal Zone [THM0] (8 C) <6>isapnp: Scanning for PnP cards... <6>isapnp: No Plug & Play device found <6>Real Time Clock Driver v1.12ac <7>hpet_resources: 0xfed00000 is busy <6>Non-volatile memory driver v1.2 <6>Linux agpgart interface v0.101 (c) Dave Jones <6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled <6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <6>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A <6>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <4>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize <6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <6>ICH7: IDE controller at PCI slot 0000:00:1f.1 <4>ACPI: Unable to derive IRQ for device 0000:00:1f.1 <4>ACPI: PCI Interrupt 0000:00:1f.1[A]: no GSI - using IRQ 7 <6>ICH7: chipset revision 1 <6>ICH7: not 100% native mode: will probe irqs later <6> ide0: BM-DMA at 0x0500-0x0507, BIOS settings: hda:DMA, hdb:pio <6> ide1: BM-DMA at 0x0508-0x050f, BIOS settings: hdc:pio, hdd:pio <7>Probing IDE interface ide0... <4>hda: DV-W28EAW, ATAPI CD/DVD-ROM drive <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <7>Probing IDE interface ide1... <7>Probing IDE interface ide1... <4>ide-floppy driver 0.99.newide <6>usbcore: registered new driver libusual <6>usbcore: registered new driver hiddev <6>usbcore: registered new driver usbhid <6>drivers/usb/input/hid-core.c: v2.6:USB HID core driver <6>PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 <6>serio: i8042 AUX port at 0x60,0x64 irq 12 <6>serio: i8042 KBD port at 0x60,0x64 irq 1 <6>mice: PS/2 mouse device common for all mice <6>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 <6>md: bitmap version 4.39 <6>TCP bic registered <6>Initializing IPsec netlink socket <6>NET: Registered protocol family 1 <6>NET: Registered protocol family 17 <4>Using IPI No-Shortcut mode <6>ACPI: (supports S0 S4 S5) <6>Freeing unused kernel memory: 240k freed <4>Write protecting the kernel read-only data: 370k <6>Time: tsc clocksource has been installed. <6>input: AT Translated Set 2 keyboard as /class/input/input0 <5>FS-Cache: Loaded <4>FS-Cache: netfs 'nfs' registered for caching <6>loop: loaded (max 8 devices) <6>Floppy drive(s): fd0 is 1.44M <6>FDC 0 is a National Semiconductor PC87306 <6>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found <6>input: PC Speaker as /class/input/input1 <6>input: ImPS/2 Logitech Wheel Mouse as /class/input/input2 <6>squashfs: version 3.1 (2006/08/09) Phillip Lougher <6>NET: Registered protocol family 10 <6>lo: Disabled Privacy Extensions <6>IPv6 over IPv4 tunneling driver <6>hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 1419kB Cache, (U)DMA <6>Uniform CD-ROM driver Revision: 3.20 <5>SCSI subsystem initialized <6>Loading iSCSI transport class v2.0-685.<5>iscsi: registered transport (tcp) <6>USB Universal Host Controller Interface driver v3.0 <6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169 <7>PCI: Setting latency timer of device 0000:00:1d.0 to 64 <6>uhci_hcd 0000:00:1d.0: UHCI Host Controller <6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 <6>uhci_hcd 0000:00:1d.0: irq 169, io base 0x00001000 <6>usb usb1: configuration #1 chosen from 1 choice <6>hub 1-0:1.0: USB hub found <6>hub 1-0:1.0: 2 ports detected <6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 209 <7>PCI: Setting latency timer of device 0000:00:1d.1 to 64 <6>uhci_hcd 0000:00:1d.1: UHCI Host Controller <6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 <6>uhci_hcd 0000:00:1d.1: irq 209, io base 0x00001020 <6>usb usb2: configuration #1 chosen from 1 choice <6>hub 2-0:1.0: USB hub found <6>hub 2-0:1.0: 2 ports detected <6>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 217 <7>PCI: Setting latency timer of device 0000:00:1d.2 to 64 <6>uhci_hcd 0000:00:1d.2: UHCI Host Controller <6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 <6>uhci_hcd 0000:00:1d.2: irq 217, io base 0x00001040 <6>usb usb3: configuration #1 chosen from 1 choice <6>hub 3-0:1.0: USB hub found <6>hub 3-0:1.0: 2 ports detected <6>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 225 <7>PCI: Setting latency timer of device 0000:00:1d.3 to 64 <6>uhci_hcd 0000:00:1d.3: UHCI Host Controller <6>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 <6>uhci_hcd 0000:00:1d.3: irq 225, io base 0x00001060 <6>usb usb4: configuration #1 chosen from 1 choice <6>hub 4-0:1.0: USB hub found <6>hub 4-0:1.0: 2 ports detected <6>ACPI: PCI Interrupt 0000:01:04.4[B] -> GSI 23 (level, low) -> IRQ 233 <6>uhci_hcd 0000:01:04.4: UHCI Host Controller <6>uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 5 <6>uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports <6>uhci_hcd 0000:01:04.4: irq 233, io base 0x00003800 <6>usb usb5: configuration #1 chosen from 1 choice <6>hub 5-0:1.0: USB hub found <6>hub 5-0:1.0: 2 ports detected <6>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 169 <7>PCI: Setting latency timer of device 0000:00:1d.7 to 64 <6>ehci_hcd 0000:00:1d.7: EHCI Host Controller <6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 6 <6>ehci_hcd 0000:00:1d.7: debug port 1 <7>PCI: cache line size of 128 is not supported by device 0000:00:1d.7 <6>ehci_hcd 0000:00:1d.7: irq 169, io mem 0xfddf0000 <6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 <6>usb usb6: configuration #1 chosen from 1 choice <6>hub 6-0:1.0: USB hub found <6>hub 6-0:1.0: 8 ports detected <6>usb 5-1: new full speed USB device using uhci_hcd and address 2 <6>usb 5-1: configuration #1 chosen from 1 choice <6>input: HP Virtual Keyboard as /class/input/input3 <6>input: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1 <6>input: HP Virtual Keyboard as /class/input/input4 <6>input: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1 <6>usb 5-2: new full speed USB device using uhci_hcd and address 3 <6>usb 5-2: configuration #1 chosen from 1 choice <6>hub 5-2:1.0: USB hub found <6>hub 5-2:1.0: 7 ports detected <6>tg3.c:v3.65 (August 07, 2006) <6>ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 16 (level, low) -> IRQ 169 <6>eth0: Tigon3 [partno(N/A) rev 9003 PHY(5714)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:18:fe:30:86:ed <6>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[1] TSOcap[1] <6>eth0: dma_rwctrl[76148000] dma_mask[64-bit] <6>ACPI: PCI Interrupt 0000:05:04.1[B] -> GSI 17 (level, low) -> IRQ 209 <6>eth1: Tigon3 [partno(N/A) rev 9003 PHY(5714)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:18:fe:30:86:ee <6>eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] <6>eth1: dma_rwctrl[76148000] dma_mask[64-bit] <7>libata version 2.00 loaded. <7>ata_piix 0000:00:1f.2: version 2.00 <6>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] <6>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 209 <7>PCI: Setting latency timer of device 0000:00:1f.2 to 64 <6>ata1: SATA max UDMA/133 cmd 0x1080 ctl 0x108A bmdma 0x10A0 irq 209 <6>ata2: SATA max UDMA/133 cmd 0x1090 ctl 0x109A bmdma 0x10A8 irq 209 <6>scsi0 : ata_piix <6>ata1.00: ATA-7, max UDMA/100, 488397168 sectors: LBA48 <6>ata1.00: ata1: dev 0 multi count 8 <6>ata1.00: configured for UDMA/100 <6>scsi1 : ata_piix <6>ata2.00: ATA-7, max UDMA/100, 488397168 sectors: LBA48 <6>ata2.00: ata2: dev 0 multi count 8 <6>ata2.00: configured for UDMA/100 <5> Vendor: ATA Model: Maxtor 6L250S0 Rev: BACE <5> Type: Direct-Access ANSI SCSI revision: 05 <5>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) <5>sda: Write Protect is off <7>sda: Mode Sense: 00 3a 00 00 <5>SCSI device sda: drive cache: write through <5>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) <5>sda: Write Protect is off <7>sda: Mode Sense: 00 3a 00 00 <5>SCSI device sda: drive cache: write through <6> sda: sda1 sda2 <5>sd 0:0:0:0: Attached scsi disk sda <5> Vendor: ATA Model: Maxtor 6L250S0 Rev: BACE <5> Type: Direct-Access ANSI SCSI revision: 05 <5>SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) <5>sdb: Write Protect is off <7>sdb: Mode Sense: 00 3a 00 00 <5>SCSI device sdb: drive cache: write through <5>SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) <5>sdb: Write Protect is off <7>sdb: Mode Sense: 00 3a 00 00 <5>SCSI device sdb: drive cache: write through <6> sdb: sdb1 sdb2 <5>sd 1:0:0:0: Attached scsi disk sdb <7>PM: Writing back config space on device 0000:05:04.0 at offset 3 (was 804000, writing 804010) <7>PM: Writing back config space on device 0000:05:04.0 at offset 1 (was 2b00000, writing 2b00146) <6>ADDRCONF(NETDEV_UP): eth0: link is not ready <6>tg3: eth0: Link is up at 100 Mbps, full duplex. <6>tg3: eth0: Flow control is on for TX and on for RX. <6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <7>eth0: no IPv6 routers present <4>Unable to identify CD-ROM format. <4>VFS: Can't find an ext2 filesystem on dev loop0. <6>security: 3 users, 6 roles, 1560 types, 166 bools, 1 sens, 1024 cats <6>security: 58 classes, 48173 rules <6>SELinux: Completing initialization. <6>SELinux: Setting up existing superblocks. <6>SELinux: initialized (dev loop0, type squashfs), not configured for labeling <6>SELinux: initialized (dev 0:15, type nfs), uses genfs_contexts <6>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts <6>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts <6>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts <6>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts <6>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs <6>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts <6>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts <6>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs <6>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts <6>SELinux: initialized (dev devpts, type devpts), uses transition SIDs <6>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs <6>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts <6>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs <6>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts <6>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs <6>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs <6>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling <6>SELinux: initialized (dev proc, type proc), uses genfs_contexts <6>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts <6>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts <6>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts <5>audit(1162305427.952:2): policy loaded auid=4294967295 <6>md: raid0 personality registered for level 0 <6>md: raid1 personality registered for level 1 <6>raid5: automatically using best checksumming function: pIII_sse <4> pIII_sse : 4750.000 MB/sec <4>raid5: using function: pIII_sse (4750.000 MB/sec) <4>raid6: int32x1 738 MB/s <4>raid6: int32x2 776 MB/s <4>raid6: int32x4 863 MB/s <4>raid6: int32x8 712 MB/s <4>raid6: mmxx1 1794 MB/s <4>raid6: mmxx2 1857 MB/s <4>raid6: sse1x1 1101 MB/s <4>raid6: sse1x2 1195 MB/s <4>raid6: sse2x1 2199 MB/s <4>raid6: sse2x2 2151 MB/s <4>raid6: using algorithm sse2x1 (2199 MB/s) <6>md: raid6 personality registered for level 6 <6>md: raid5 personality registered for level 5 <6>md: raid4 personality registered for level 4 <4>GFS2 (built Oct 16 2006 15:01:18) installed <6>Lock_Nolock (built Oct 16 2006 15:02:21) installed <6>JFS: nTxBlock = 8084, nTxLock = 64679 <6>SGI XFS with ACLs, security attributes, large block numbers, no debug enabled <6>SGI XFS Quota Management subsystem <6>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@xxxxxxxxxx <6>device-mapper: multipath: version 1.0.4 loaded <6>device-mapper: multipath round-robin: version 1.0.0 loaded <6>device-mapper: multipath emc: version 0.0.3 loaded <5>audit(1162305431.328:3): audit_pid=727 old=0 by auid=4294967295 subj=system_u:system_r:anaconda_t:s0
14:35:58 INFO : 1034876 kB are available 14:35:58 INFO : modules to insert cramfs fat vfat sunrpc lockd fscache nfs_acl nfs loop isofs floppy edd pcspkr squashfs 14:35:59 INFO : loaded cramfs from /modules/modules.cgz 14:35:59 INFO : loaded fat from /modules/modules.cgz 14:35:59 INFO : loaded vfat from /modules/modules.cgz 14:35:59 INFO : loaded sunrpc from /modules/modules.cgz 14:35:59 INFO : loaded lockd from /modules/modules.cgz 14:35:59 INFO : loaded fscache from /modules/modules.cgz 14:35:59 INFO : loaded nfs_acl from /modules/modules.cgz 14:35:59 INFO : loaded nfs from /modules/modules.cgz 14:35:59 INFO : loaded loop from /modules/modules.cgz 14:35:59 INFO : loaded floppy from /modules/modules.cgz 14:35:59 INFO : loaded edd from /modules/modules.cgz 14:35:59 INFO : loaded pcspkr from /modules/modules.cgz 14:35:59 INFO : loaded squashfs from /modules/modules.cgz 14:35:59 DEBUG : module(s) isofs not found 14:35:59 INFO : inserted /tmp/cramfs.ko 14:35:59 INFO : inserted /tmp/fat.ko 14:35:59 INFO : inserted /tmp/vfat.ko 14:35:59 INFO : inserted /tmp/sunrpc.ko 14:35:59 INFO : inserted /tmp/lockd.ko 14:35:59 INFO : inserted /tmp/fscache.ko 14:35:59 INFO : inserted /tmp/nfs_acl.ko 14:35:59 INFO : inserted /tmp/nfs.ko 14:35:59 INFO : inserted /tmp/loop.ko 14:35:59 INFO : inserted /tmp/floppy.ko 14:35:59 INFO : inserted /tmp/edd.ko 14:35:59 INFO : inserted /tmp/pcspkr.ko 14:35:59 INFO : inserted /tmp/squashfs.ko 14:35:59 INFO : load module set done 14:35:59 INFO : modules to insert ipv6 14:35:59 INFO : loaded ipv6 from /modules/modules.cgz 14:35:59 INFO : inserted /tmp/ipv6.ko 14:35:59 INFO : load module set done 14:35:59 INFO : modules to insert cdrom ide-cd 14:35:59 INFO : loaded cdrom from /modules/modules.cgz 14:35:59 INFO : loaded ide-cd from /modules/modules.cgz 14:35:59 INFO : inserted /tmp/cdrom.ko 14:35:59 INFO : inserted /tmp/ide-cd.ko 14:35:59 INFO : load module set done 14:35:59 INFO : modules to insert scsi_mod sd_mod sr_mod 14:36:00 INFO : loaded scsi_mod from /modules/modules.cgz 14:36:00 INFO : loaded sd_mod from /modules/modules.cgz 14:36:00 INFO : loaded sr_mod from /modules/modules.cgz 14:36:00 INFO : inserted /tmp/scsi_mod.ko 14:36:00 INFO : inserted /tmp/sd_mod.ko 14:36:00 INFO : inserted /tmp/sr_mod.ko 14:36:00 INFO : load module set done 14:36:00 INFO : modules to insert scsi_transport_iscsi libiscsi iscsi_tcp 14:36:00 INFO : loaded scsi_transport_iscsi from /modules/modules.cgz 14:36:00 INFO : loaded libiscsi from /modules/modules.cgz 14:36:00 INFO : loaded iscsi_tcp from /modules/modules.cgz 14:36:00 INFO : inserted /tmp/scsi_transport_iscsi.ko 14:36:00 INFO : inserted /tmp/libiscsi.ko 14:36:00 INFO : inserted /tmp/iscsi_tcp.ko 14:36:00 INFO : load module set done 14:36:00 INFO : looking for usb controllers 14:36:00 INFO : found USB controller uhci-hcd 14:36:00 INFO : modules to insert uhci-hcd 14:36:00 INFO : loaded uhci-hcd from /modules/modules.cgz 14:36:01 INFO : inserted /tmp/uhci-hcd.ko 14:36:01 INFO : load module set done 14:36:01 INFO : found USB controller ehci-hcd 14:36:01 INFO : modules to insert ehci-hcd 14:36:01 INFO : loaded ehci-hcd from /modules/modules.cgz 14:36:01 INFO : inserted /tmp/ehci-hcd.ko 14:36:01 INFO : load module set done 14:36:01 INFO : found USB controller uhci-hcd 14:36:01 INFO : modules to insert 14:36:01 INFO : load module set done 14:36:01 INFO : found USB controller uhci-hcd 14:36:01 INFO : modules to insert 14:36:01 INFO : load module set done 14:36:01 INFO : found USB controller uhci-hcd 14:36:01 INFO : modules to insert 14:36:01 INFO : load module set done 14:36:01 INFO : found USB controller uhci-hcd 14:36:01 INFO : modules to insert 14:36:01 INFO : load module set done 14:36:01 DEBUG : waiting for usb to become stable... 14:36:05 DEBUG : 4 seconds. 14:36:05 INFO : modules to insert hid keybdev 14:36:05 DEBUG : module(s) hid keybdev not found 14:36:05 INFO : load module set done 14:36:06 INFO : no firewire controller found 14:36:06 DEBUG : no pcic controller found 14:36:06 DEBUG : probing buses 14:36:06 DEBUG : finished bus probing 14:36:06 DEBUG : ignoring driverless device Compaq Computer Corporation Unknown device b204 14:36:06 DEBUG : ignoring driverless device Compaq Computer Corporation Unknown device b203 14:36:06 DEBUG : ignoring driverless device Broadcom Unknown device 0104 14:36:06 DEBUG : ignoring driverless device Broadcom Unknown device 0103 14:36:06 DEBUG : ignoring driverless device Intel Corporation Unknown device 27b8 14:36:06 DEBUG : ignoring driverless device Intel Corporation Unknown device 244e 14:36:06 DEBUG : ignoring driverless device Intel Corporation Unknown device 27e0 14:36:06 DEBUG : ignoring driverless device Intel Corporation Unknown device 27d0 14:36:06 DEBUG : ignoring driverless device Intel Corporation Unknown device 2779 14:36:06 DEBUG : ignoring driverless device Intel Corporation Unknown device 2778 14:36:06 DEBUG : ignoring driverless device ATI Technologies Inc ES1000 14:36:06 DEBUG : ignoring driverless device Intel Corporation Unknown device 27df 14:36:06 INFO : modules to insert tg3 libata ata_piix 14:36:06 INFO : loaded tg3 from /modules/modules.cgz 14:36:06 INFO : loaded libata from /modules/modules.cgz 14:36:06 INFO : loaded ata_piix from /modules/modules.cgz 14:36:06 INFO : inserted /tmp/tg3.ko 14:36:06 INFO : inserted /tmp/libata.ko 14:36:08 INFO : inserted /tmp/ata_piix.ko 14:36:08 INFO : load module set done 14:36:30 DEBUG : going to set language to it_IT.UTF-8 14:36:30 INFO : setting language to it_IT.UTF-8 14:36:30 INFO : 53 keymaps are available 14:36:33 INFO : need to set up networking 14:36:33 INFO : going to pick interface 14:36:36 INFO : going to do getNetConfig 14:36:36 INFO : eth0 is not a wireless adapter 14:36:40 DEBUG : waiting for link eth0... 14:36:40 DEBUG : 0 seconds. 14:36:40 INFO : Listening on LPF/eth0/00:18:fe:30:86:ed 14:36:40 INFO : Sending on LPF/eth0/00:18:fe:30:86:ed 14:36:40 INFO : Sending on Socket/fallback 14:36:40 INFO : DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3 14:36:43 INFO : DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4 14:36:47 INFO : DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 14:36:55 INFO : DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 14:36:55 INFO : DHCPOFFER from 192.168.50.40 14:36:55 INFO : DHCPREQUEST on eth0 to 255.255.255.255 port 67 14:36:55 INFO : DHCPACK from 192.168.50.40 14:36:55 INFO : bound to 192.168.50.61 -- renewal in 10382 seconds. 14:36:56 INFO : DHCPv4 eth0 - obtained lease 192.168.50.61 14:36:56 INFO : DHCPv4 eth0 - option subnet-mask: 255.255.255.0 14:36:56 INFO : DHCPv4 eth0 - option subnet-mask - prefix_len: 24 broadcast: 192.168.50.255 14:36:56 INFO : DHCPv4 eth0 - option routers: 14:36:56 DEBUG : device = eth0 14:36:56 DEBUG : broadcast = 192.168.50.255 14:36:56 DEBUG : netmask = 255.255.255.0 14:36:56 DEBUG : network = 192.168.50.0 14:36:56 DEBUG : gateway = 192.168.50.40 14:36:56 DEBUG : dns[0] = 192.168.50.40 14:36:56 DEBUG : waiting for link eth0... 14:36:56 DEBUG : 0 seconds. 14:36:56 WARNING : reverse name lookup failed 14:36:56 INFO : starting to STEP_URL 14:36:56 INFO : going to do nfsGetSetup 14:37:07 INFO : mounting nfs path lesca:/u/fc6 14:37:07 INFO : can access /mnt/source/images/stage2.img 14:37:07 INFO : mntloop loop0 on /mnt/runtime as /mnt/source/images/stage2.img fd is 19 14:37:07 DEBUG : after mountStage2, rc is 0 14:37:07 INFO : got url nfs://mnt/source/. 14:37:07 INFO : Loading SELinux policy 14:37:07 INFO : getting ready to spawn shell now 14:37:07 INFO : modules to insert 14:37:07 INFO : load module set done 14:37:07 INFO : modules to insert 14:37:07 INFO : load module set done 14:37:07 INFO : modules to insert 14:37:07 INFO : load module set done 14:37:07 DEBUG : probing buses 14:37:08 DEBUG : finished bus probing 14:37:08 DEBUG : ignoring driverless device Compaq Computer Corporation Integrated Lights Out Processor 14:37:08 DEBUG : ignoring driverless device Compaq Computer Corporation Integrated Lights Out Controller 14:37:08 DEBUG : ignoring driverless device Broadcom HT1000 PCI/PCI-X bridge 14:37:08 DEBUG : ignoring driverless device Broadcom EPB PCI-Express to PCI-X Bridge 14:37:08 DEBUG : ignoring driverless device Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge 14:37:08 DEBUG : ignoring driverless device Intel Corporation 82801 PCI Bridge 14:37:08 DEBUG : ignoring driverless device Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5 14:37:08 DEBUG : ignoring driverless device Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 14:37:08 DEBUG : ignoring driverless device Intel Corporation E7230/3000/3010 PCI Express Root Port 14:37:08 DEBUG : ignoring driverless device Intel Corporation E7230/3000/3010 Memory Controller Hub 14:37:08 DEBUG : ignoring driverless device ATI Technologies Inc ES1000 14:37:08 DEBUG : ignoring driverless device Intel Corporation 82801G (ICH7 Family) IDE Controller 14:37:08 INFO : modules to insert 14:37:08 INFO : load module set done 14:37:08 INFO : modules to insert md raid0 raid1 raid5 raid6 xor raid456 msdos jbd ext3 gfs2 lock_nolock reiserfs jfs xfs dm-mod dm-zero dm-mirror dm-snapshot dm-multipath dm-round-robin dm-emc 14:37:08 INFO : loaded raid0 from /modules/modules.cgz 14:37:08 INFO : loaded raid1 from /modules/modules.cgz 14:37:08 INFO : loaded xor from /modules/modules.cgz 14:37:08 INFO : loaded raid456 from /modules/modules.cgz 14:37:08 INFO : loaded msdos from /modules/modules.cgz 14:37:08 INFO : loaded jbd from /modules/modules.cgz 14:37:08 INFO : loaded ext3 from /modules/modules.cgz 14:37:08 INFO : loaded gfs2 from /modules/modules.cgz 14:37:08 INFO : loaded lock_nolock from /modules/modules.cgz 14:37:08 INFO : loaded reiserfs from /modules/modules.cgz 14:37:08 INFO : loaded jfs from /modules/modules.cgz 14:37:08 INFO : loaded xfs from /modules/modules.cgz 14:37:08 INFO : loaded dm-mod from /modules/modules.cgz 14:37:08 INFO : loaded dm-zero from /modules/modules.cgz 14:37:08 INFO : loaded dm-mirror from /modules/modules.cgz 14:37:08 INFO : loaded dm-snapshot from /modules/modules.cgz 14:37:08 INFO : loaded dm-multipath from /modules/modules.cgz 14:37:08 INFO : loaded dm-round-robin from /modules/modules.cgz 14:37:08 INFO : loaded dm-emc from /modules/modules.cgz 14:37:08 DEBUG : module(s) md raid5 raid6 not found 14:37:08 INFO : inserted /tmp/raid0.ko 14:37:08 INFO : inserted /tmp/raid1.ko 14:37:08 INFO : inserted /tmp/xor.ko 14:37:08 INFO : inserted /tmp/raid456.ko 14:37:08 INFO : inserted /tmp/msdos.ko 14:37:08 INFO : inserted /tmp/jbd.ko 14:37:08 INFO : inserted /tmp/ext3.ko 14:37:08 INFO : inserted /tmp/gfs2.ko 14:37:08 INFO : inserted /tmp/lock_nolock.ko 14:37:08 INFO : inserted /tmp/reiserfs.ko 14:37:09 INFO : inserted /tmp/jfs.ko 14:37:09 INFO : inserted /tmp/xfs.ko 14:37:09 INFO : inserted /tmp/dm-mod.ko 14:37:09 INFO : inserted /tmp/dm-zero.ko 14:37:09 INFO : inserted /tmp/dm-mirror.ko 14:37:09 INFO : inserted /tmp/dm-snapshot.ko 14:37:09 INFO : inserted /tmp/dm-multipath.ko 14:37:09 INFO : inserted /tmp/dm-round-robin.ko 14:37:09 INFO : inserted /tmp/dm-emc.ko 14:37:09 INFO : load module set done 14:37:09 INFO : looking for USB mouse... 14:37:09 INFO : USB mouse found, loading mousedev module 14:37:09 INFO : modules to insert mousedev 14:37:09 DEBUG : module(s) mousedev not found 14:37:09 INFO : load module set done 14:37:09 DEBUG : failed to loading mousedev module 14:37:09 INFO : NFS install method detected, will use RHupdates/ 14:37:09 INFO : Running anaconda script /usr/bin/anaconda 14:37:09 DEBUG : adding extraArg --vnc 14:37:09 DEBUG : adding extraArg --vncconnect=lesca 14:37:11 INFO : using only installclass _Fedora 14:37:11 INFO : _Fedora is only installclass, using it 14:37:11 INFO : Display mode = g 14:37:11 INFO : Method = nfs://mnt/source/. 14:37:19 INFO : anaconda floppy device fd0 14:37:22 INFO : Avvio VNC... 14:37:22 INFO : ip of eth0 is 192.168.50.61 14:37:22 WARNING : ATTENZIONE!!! Il server VNC è in esecuzione senza password! Potete utilizzare l'opzione di boot vncpassword=<password> se volete rendere sicuro il server. 14:37:22 INFO : Il server VNC è in esecuzione. 14:37:22 INFO : Tentativo di connessione al client vnc sull'host lesca... 14:37:23 INFO : Connesso! 14:37:24 INFO : Started mini-wm 14:37:24 INFO : Inizio installazione grafica... 14:37:25 INFO : no /tmp/fcpconfig; not configuring zfcp 14:37:25 INFO : no /tmp/fcpconfig; not configuring zfcp
-- fedora-devel-list mailing list fedora-devel-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/fedora-devel-list
