On Fri, 2006-06-30 at 05:22 -0400, Alan Cox wrote:
> On Fri, Jun 30, 2006 at 09:32:52AM +0200, Hans Kristian Rosbach wrote:
> > have to coach the whoever-is-available staff when something goes wrong).
> > But this does come up on boot:
> >
> > setup_irq: irq handler mismatch
> > <c0447c64> setup_irq+0xef/0xfc <c0540601> serial8250_interrupt
>
> Are both the serial port and one of the other devices assigned the same
> legacy IRQ (3 or 4) ?
# cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3
0: 3991989 3982729 3957498 4014977 IO-APIC-edge timer
1: 5 10 7 2 IO-APIC-edge i8042
3: 0 0 1 0 IO-APIC-level acpi
8: 0 0 1 0 IO-APIC-edge rtc
12: 79 83 84 83 IO-APIC-edge i8042
14: 238014 238873 236932 239364 IO-APIC-edge ide0
177: 19742 19363 19022 19420 IO-APIC-level
megaraid
193: 47552 47200 46515 47467 IO-APIC-level eth1
201: 0 0 0 0 IO-APIC-level
ohci_hcd:usb1
NMI: 0 0 0 0
LOC: 15947085 15947084 15947083 15947082
ERR: 0
MIS: 0
# cat /proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
02f8-02ff : serial
0374-0375 : pnp 00:0d
0377-0377 : pnp 00:0d
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial
0430-0437 : pnp 00:01
0438-0439 : pnp 00:01
0440-0447 : piix4_smbus
0480-0483 : PM1b_EVT_BLK
0488-048b : PM_TMR
04e0-04e3 : PM1a_EVT_BLK
04e4-04e5 : PM1a_CNT_BLK
04f0-04f7 : GPE0_BLK
0600-0600 : pnp 00:0d
0700-070f : 0000:00:0f.1
0700-0707 : ide0
0708-070f : ide1
0900-090f : pnp 00:0d
0f50-0f58 : pnp 00:0d
2200-221f : 0000:00:05.0
2200-221f : pcnet32_probe_pci
4000-40ff : 0000:02:06.0
4000-40ff : r8169
# dmesg
Linux version 2.6.17-1.2139_FC4smp
(bhcompile@xxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.0.2 20051125 (Red
Hat 4.0.2-8)) #1 SMP Fri Jun 23 21:12:13 EDT 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fff9380 (usable)
BIOS-e820: 000000007fff9380 - 0000000080000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
1151MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 0009ddd0
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 524281
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 294905 pages, LIFO batch:31
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP (v000 IBM ) @ 0x000fdfd0
ACPI: RSDT (v001 IBM SERASSLT 0x00001001 IBM 0x45444f43) @
0x7fffff80
ACPI: FADT (v001 IBM SERASSLT 0x00001001 IBM 0x45444f43) @
0x7fffff00
ACPI: MADT (v001 IBM SERASSLT 0x00001001 IBM 0x45444f43) @
0x7ffffe80
ACPI: DSDT (v001 IBM SERASSLT 0x00001001 MSFT 0x0100000b) @
0x00000000
ACPI: PM-Timer IO Port: 0x488
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x03] enabled)
Processor #3 6:10 APIC version 17
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:10 APIC version 17
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 6:10 APIC version 17
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
Processor #2 6:10 APIC version 17
ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 14, version 17, address 0xfec00000, GSI 0-15
ACPI: IOAPIC (id[0x0d] address[0xfec01000] gsi_base[16])
IOAPIC[1]: apic_id 13, version 17, address 0xfec01000, GSI 16-31
ACPI: IRQ3 used by override.
Enabling APIC mode: Flat. Using 2 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
Built 1 zonelists
Kernel command line: ro lapic root=LABEL=/
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
mapped IOAPIC to ffffb000 (fec01000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07b0000 soft=c07d0000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 701.902 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2068736k/2097124k available (2061k kernel code, 27168k reserved,
1437k data, 236k init, 1179620k highmem)
Checking if this processor honours the WP bit even in supervisor mode...
Ok.
Calibrating delay using timer specific routine.. 1405.10 BogoMIPS
(lpj=2810203)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000
00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000
00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: After all inits, caps: 0383f3ff 00000000 00000000 00000040 00000000
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
CPU0: Intel Pentium III (Cascades) stepping 01
SMP alternatives: switching to SMP code
Booting processor 1/0 eip 3000
CPU 1 irqstacks, hard=c07b1000 soft=c07d1000
Initializing CPU#1
Calibrating delay using timer specific routine.. 1403.59 BogoMIPS
(lpj=2807180)
CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000
00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000
00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: After all inits, caps: 0383f3ff 00000000 00000000 00000040 00000000
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Pentium III (Cascades) stepping 01
SMP alternatives: switching to SMP code
Booting processor 2/1 eip 3000
CPU 2 irqstacks, hard=c07b2000 soft=c07d2000
Initializing CPU#2
Calibrating delay using timer specific routine.. 1403.61 BogoMIPS
(lpj=2807225)
CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000
00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000
00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: After all inits, caps: 0383f3ff 00000000 00000000 00000040 00000000
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#2.
CPU2: Intel Pentium III (Cascades) stepping 01
SMP alternatives: switching to SMP code
Booting processor 3/2 eip 3000
CPU 3 irqstacks, hard=c07b3000 soft=c07d3000
Initializing CPU#3
Calibrating delay using timer specific routine.. 1403.61 BogoMIPS
(lpj=2807235)
CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000
00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000
00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: After all inits, caps: 0383f3ff 00000000 00000000 00000040 00000000
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#3.
CPU3: Intel Pentium III (Cascades) stepping 01
Total of 4 processors activated (5615.92 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
checking TSC synchronization across 4 CPUs: passed.
Brought up 4 CPUs
migration_cost=4000
checking if image is initramfs... it is
Freeing initrd memory: 1170k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd32c, last bus=8
Setting up standard PCI resources
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:06.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LMXC] (IRQs *7)
ACPI: PCI Interrupt Link [LMXD] (IRQs *7)
ACPI: PCI Interrupt Link [LPET] (IRQs *10)
ACPI: PCI Interrupt Link [LMVI] (IRQs *18), disabled.
ACPI: PCI Interrupt Link [LP1A] (IRQs) *0
ACPI: PCI Interrupt Link [LM1B] (IRQs *15)
ACPI: PCI Interrupt Link [LPUS] (IRQs *4)
ACPI: PCI Root Bridge [PCI2] (0000:02)
PCI: Probing PCI hardware (bus 02)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI2._PRT]
ACPI: PCI Interrupt Link [LPSA] (IRQs) *0
ACPI: PCI Interrupt Link [LPSB] (IRQs) *0
ACPI: PCI Interrupt Link [LP5A] (IRQs) *0
ACPI: PCI Interrupt Link [LM5B] (IRQs *11)
ACPI: PCI Interrupt Link [LP6A] (IRQs *11)
ACPI: PCI Interrupt Link [LM6B] (IRQs *15)
ACPI: PCI Root Bridge [PCI5] (0000:05)
PCI: Probing PCI hardware (bus 05)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI5._PRT]
ACPI: PCI Interrupt Link [LP2A] (IRQs *9)
ACPI: PCI Interrupt Link [LM2B] (IRQs *4)
ACPI: PCI Interrupt Link [LP3A] (IRQs) *0
ACPI: PCI Interrupt Link [LM3B] (IRQs *9)
ACPI: PCI Interrupt Link [LP4A] (IRQs) *0
ACPI: PCI Interrupt Link [LM4B] (IRQs *10)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 16 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
pnp: 00:01: ioport range 0x438-0x439 has been reserved
pnp: 00:01: ioport range 0x430-0x437 has been reserved
pnp: 00:0d: ioport range 0x600-0x600 has been reserved
pnp: 00:0d: ioport range 0x900-0x90f has been reserved
pnp: 00:0d: ioport range 0x374-0x375 has been reserved
pnp: 00:0d: ioport range 0x377-0x377 has been reserved
pnp: 00:0d: ioport range 0xf50-0xf58 has been reserved
PCI: Bridge: 0000:05:02.0
IO window: disabled.
MEM window: eb000000-ec0fffff
PREFETCH window: ecf00000-ecffffff
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1151597294.096:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key A81E23FA1B61875E
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: unable to determine aperture size.
agpgart: agp_backend_initialize() failed.
agpgart-serverworks: probe of 0000:00:00.0 failed with error -22
agpgart: unable to determine aperture size.
agpgart: agp_backend_initialize() failed.
agpgart-serverworks: probe of 0000:00:00.1 failed with error -22
agpgart: ServerWorks CNB20HE is unsupported due to lack of
documentation.
agpgart: ServerWorks CNB20HE is unsupported due to lack of
documentation.
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
pnp: Device 00:05 activated.
00:05: ttyS0 at I/O 0x3f8 (irq = 14) is a 16550A
pnp: Device 00:06 activated.
00:06: ttyS1 at I/O 0x2f8 (irq = 15) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
SvrWks OSB4: IDE controller at PCI slot 0000:00:0f.1
SvrWks OSB4: chipset revision 0
SvrWks OSB4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x0700-0x0707, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0x0708-0x070f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: LTN485S, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
hda: ATAPI 48X CD-ROM drive, 120kB Cache, (U)DMA
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver libusual
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
ACPI wakeup devices:
PCI0
ACPI: (supports S0 S4 S5)
Freeing unused kernel memory: 236k freed
Write protecting the kernel read-only data: 947k
input: AT Translated Set 2 keyboard as /class/input/input0
SCSI subsystem initialized
megaraid cmm: 2.20.2.6 (Release Date: Mon Mar 7 00:01:03 EST 2005)
megaraid: 2.20.4.8 (Release Date: Mon Apr 11 12:27:22 EST 2006)
megaraid: probe new device 0x1000:0x0407:0x1000:0x0531: bus 6:slot
0:func 0
ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 21 (level, low) -> IRQ 177
megaraid: fw version:[414C] bios version:[H429]
scsi0 : LSI Logic MegaRAID driver
scsi[0]: scanning scsi channel 0 [Phy 0] for non-raid devices
input: ImPS/2 Generic Wheel Mouse as /class/input/input1
Vendor: IBM Model: YGLv3 S2 Rev: 0
Type: Processor ANSI SCSI revision: 02
scsi[0]: scanning scsi channel 1 [Phy 1] for non-raid devices
Vendor: IBM Model: YGHv3 S2 Rev: 0
Type: Processor ANSI SCSI revision: 02
scsi[0]: scanning scsi channel 2 [Phy 2] for non-raid devices
Vendor: IBM Model: EXP300 S160 Rev: D014
Type: Processor ANSI SCSI revision: 03
scsi[0]: scanning scsi channel 3 [Phy 3] for non-raid devices
Vendor: IBM Model: EXP300 S160 Rev: D014
Type: Processor ANSI SCSI revision: 03
scsi[0]: scanning scsi channel 4 [virtual] for logical drives
Vendor: MegaRAID Model: LD 0 RAID5 34G Rev: 414C
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 71077888 512-byte hdwr sectors (36392 MB)
sda: Write Protect is off
sda: Mode Sense: 00 00 00 00
sda: asking for cache data failed
sda: assuming drive cache: write through
SCSI device sda: 71077888 512-byte hdwr sectors (36392 MB)
sda: Write Protect is off
sda: Mode Sense: 00 00 00 00
sda: asking for cache data failed
sda: assuming drive cache: write through
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:4:0:0: Attached scsi disk sda
Vendor: MegaRAID Model: LD 1 RAID5 70G Rev: 414C
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sdb: 143622144 512-byte hdwr sectors (73535 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: asking for cache data failed
sdb: assuming drive cache: write through
SCSI device sdb: 143622144 512-byte hdwr sectors (73535 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: asking for cache data failed
sdb: assuming drive cache: write through
sdb: sdb1
sd 0:4:1:0: Attached scsi disk sdb
Vendor: MegaRAID Model: LD 2 RAID5 225G Rev: 414C
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sdc: 462006272 512-byte hdwr sectors (236547 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 00 00 00
sdc: asking for cache data failed
sdc: assuming drive cache: write through
SCSI device sdc: 462006272 512-byte hdwr sectors (236547 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 00 00 00
sdc: asking for cache data failed
sdc: assuming drive cache: write through
sdc: sdc1
sd 0:4:2:0: Attached scsi disk sdc
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit(1151597306.733:2): selinux=0 auid=4294967295
0:0:8:0: Attached scsi generic sg0 type 3
0:1:9:0: Attached scsi generic sg1 type 3
0:2:15:0: Attached scsi generic sg2 type 3
0:3:15:0: Attached scsi generic sg3 type 3
sd 0:4:0:0: Attached scsi generic sg4 type 0
sd 0:4:1:0: Attached scsi generic sg5 type 0
sd 0:4:2:0: Attached scsi generic sg6 type 0
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
pcnet32.c:v1.32 18.Mar.2006 tsbogend@xxxxxxxxxxxxxxxx
ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 185
pcnet32: PCnet/FAST III 79C975 at 0x2200, 00 06 29 f6 2b fd assigned IRQ
185.
pcnet32: Found PHY 0000:6b60 at address 30.
eth0: registered as PCnet/FAST III 79C975
pcnet32: 1 cards_found.
r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 25 (level, low) -> IRQ 193
eth1: Identified chip type is 'RTL8169s/8110s'.
eth1: RTL8169 at 0xf8806c00, 00:08:a1:95:75:3a, IRQ 193
piix4_smbus 0000:00:0f.0: Found 0000:00:0f.0 device
piix4_smbus 0000:00:0f.0: Unusual config register value
piix4_smbus 0000:00:0f.0: Try using fix_hstcfg=1 if you experience
problems
piix4_smbus 0000:00:0f.0: Illegal Interrupt configuration (or code out
of date)!
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver
(PCI)
ACPI: PCI Interrupt 0000:00:0f.2[A] -> GSI 19 (level, low) -> IRQ 201
ohci_hcd 0000:00:0f.2: OHCI Host Controller
ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:0f.2: irq 201, io mem 0xfebfe000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ACPI: Power Button (FF) [PWRF]
ibm_acpi: ec object not found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@xxxxxxxxxx
EXT3 FS on sda3, internal journal
SGI XFS with ACLs, security attributes, large block numbers, no debug
enabled
SGI XFS Quota Management subsystem
XFS mounting filesystem sda6
Ending clean XFS mount for filesystem: sda6
XFS mounting filesystem sdb1
Ending clean XFS mount for filesystem: sdb1
XFS mounting filesystem sdc1
Ending clean XFS mount for filesystem: sdc1
Adding 2096440k swap on /dev/sda5. Priority:-1 extents:1
across:2096440k
r8169: eth1: link up
audit(1151590121.991:3): audit_pid=1928 old=0 by auid=4294967295
lp: driver loaded but no devices found
setup_irq: irq handler mismatch
<c0447c64> setup_irq+0xef/0xfc <c0540601> serial8250_interrupt
+0x0/0xe2
<c0447dcc> request_irq+0x6d/0x89 <c0540269> serial8250_startup
+0x2f3/0x434
<c053cf5b> uart_startup+0x65/0x10a <c053d1c1> uart_open+0x1c1/0x3d0
<c0524475> init_dev+0x3c6/0x4f6 <c0525881> tty_open+0x181/0x2d4
<c046ed80> chrdev_open+0x182/0x19e <c046ebfe> chrdev_open+0x0/0x19e
<c04666db> __dentry_open+0xc6/0x1aa <c0466823> nameidata_to_filp
+0x19/0x28
<c046685d> do_filp_open+0x2b/0x31 <c047b686> dput+0xf0/0x210
<c0466955> do_sys_open+0x3c/0xa9 <c04669ef> sys_open+0x16/0x18
<c0403d2f> syscall_call+0x7/0xb
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
eth1: no IPv6 routers present
--
fedora-devel-list mailing list
fedora-devel-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/fedora-devel-list
