> To build a module, you need kernel-devel, and it needs to be the same version as the > kernel you are building against. kernel-devel can be parallel installed, so you can have > multiple versions. It is highly recommended that you run the 5.3.11 or newer kernel > packages at this point as well, since they fix a number of security issues. Well I was able to find kernel-headers for 5.1.20 and 5.3.7 and the build log (hptdrv.log) a successful build. But fedora is still not happy with this driver. [ 11.043838] rsnvme: loading out-of-tree module taints kernel. [ 11.043843] rsnvme: module license 'Proprietary' taints kernel. [ 11.043844] Disabling lock debugging due to kernel taint [ 11.043981] rsnvme: module verification failed: signature and/or required key missing - tainting kernel [ 11.045248] rsnvme:RocketNVMe RAID controller driver v1.2.16 block major fc [ 11.048774] rsnvme:Found PLX upstream port (bus 4) (cmd 100507). [ 11.048970] rsnvme:Mapped Va 00000000784f3ab3 size 690 874710b5 The 5.1.20 kernel will load desipte it pedantic unhappyness. But something was install at some time that stops the 5.3.7 kernel is early boot. I can't get a screen snap of this error message because this is a workstation install and does not have a root password (at least I don't remember after all these years). All I can do is power off and reboot into the 5.1.20 kernel. Basically in 5.3.7 dracut-pre-udev is extremely unhappy as modprobe fails for rsnvme.ko in /lib/modules/5.3.7... Put the machine in emergency mode and demands a root password (Control D to continue does not help). Again this does not happen with 5.1.20. Something has changed. So rsnvme.ko is the scsi driver for the HighPoint RAID adapter. OK I can uninstall the rsnvme driver and then use the fedora nvme block drivers and soft-RAID (at 1/2 the performance). But that does not help with dracut modprobe of rsnvme. The 5.1.20 kernel complains but boots to a logon. The 5.3.7 kernel just dies every time. What I can seefind is a /lib/dracut/modules.d/40hptdrv/ directory with two script files and one does do a modprobe rsnvme. So I can guess that removing this might help with 5.3.7 problem. But editing these files directly does not help. So I suspect extreme cleverness where these files are are not used at boot. So is there dracut (or something) command that will remove the hptdrv driver component from dracut and the kernal, so that I can actually this system. _______________________________________________ devel mailing list -- devel@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to devel-leave@xxxxxxxxxxxxxxxxxxxxxxx Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/devel@xxxxxxxxxxxxxxxxxxxxxxx
