I send an email to this list because i tried a lot of thing to solve my problem and maybe it could be a module problem : modprobing bttv seems to give good results and all is autodetected : bttv: driver version 0.9.15 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). ACPI: PCI interrupt 0000:01:07.0[A] -> GSI 11 (level, low) -> IRQ 11 bttv0: Bt878 (rev 17) at 0000:01:07.0, irq: 11, latency: 64, mmio: 0xeb800000 bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012 bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected] bttv0: gpio: en=00000000, out=00000000 in=00fff3ff [init] bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: pinnacle/mt: id=4 info="PAL+SECAM / mono" radio=no bttv0: using tuner=33 bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found tda9885/6/7: chip found @ 0x96 tuner: chip found at addr 0xc0 i2c-bus bt878 #0 [sw] tuner: type set to 33 (MT20xx universal) by bt878 #0 [sw] tuner: microtune: companycode=3cbf part=42 rev=2f tuner: microtune MT2050 found, OK bttv0: registered device video0 bttv0: registered device vbi0 bttv0: PLL: 28636363 => 35468950 . ok The problem is i receive no signal in tvtime whereas this card works fine under windows. It seems the system cannot set the right tuner frequency : mt2050_set_if_freq failed with -121 Someone could help me ? -- Eric Tanguy | Nantes, France <eric.tanguy@xxxxxxxxxxxxxx> Key : A4B8368F | Key Server : subkeys.pgp.net Fedora Core release 3 (Heidelberg) sur athlon kernel 2.6.10-1.770_FC3
Attachment:
signature.asc
Description: Ceci est une partie de message =?ISO-8859-1?Q?num=E9riquement?= =?ISO-8859-1?Q?_sign=E9e?=
