On Fri, 11 Mar 2005 16:04:22 -0500 Dave Jones <davej@xxxxxxxxxx> wrote:
> On Fri, Mar 11, 2005 at 08:48:51PM +0000, Paul wrote:
> > usb 3-3: reset full speed USB device using ohci_hcd and address 7
> > usb 3-3: hald timed out on ep0in
> > usb 3-3: hald timed out on ep0in
> > usb 3-3: hald timed out on ep0in
> > scsi: Device offlined - not ready after error recovery: host 1 channel 0 id 0 lun 0
>
> So, this is why your card reader doesn't show up.
> Why it does this is a mystery to me right now.
This is cute, too:
usb 3-1: new full speed USB device using ohci_hcd and address 2
<----- printer works ok on port #1
usb 3-2: new full speed USB device using ohci_hcd and address 3
usb 3-2: device descriptor read/64, error -110
usb 3-2: device descriptor read/64, error -110
usb 3-2: new full speed USB device using ohci_hcd and address 4
usb 3-2: device descriptor read/64, error -110
usb 3-2: device descriptor read/64, error -110
usb 3-2: new full speed USB device using ohci_hcd and address 5
usb 3-2: device not accepting address 5, error -110
usb 3-2: new full speed USB device using ohci_hcd and address 6
usb 3-2: device not accepting address 6, error -110
<----- something is connected but does not work, or the hub signals
presence wrongly on port #2 (scanner?)
usb 3-3: new full speed USB device using ohci_hcd and address 7
usb-storage: device found at 7
usb-storage: waiting for device to settle before scanning
<----- Yay, storage on port #3
And then, the asynchronous scanning fails.
-- Pete
