On one of my machines, kmodule under xen gets stuck in an infinite loop: rt_sigprocmask(SIG_SETMASK, ~[], [], 8) = 0 vm86old(0x806a94c) = -1 ENOSYS (Function not implemented) rt_sigprocmask(SIG_SETMASK, ~[], [], 8) = 0 vm86old(0x806a94c) = -1 ENOSYS (Function not implemented) .... (I can ^C it, when rc.sysinit starts, causing the script to exit and init to continue to runlevel 3.) Without xen, it outputs the following: OTHER i2c-viapro OTHER parport_pc NETWORK via-rhine AUDIO snd-via82xx USB uhci-hcd USB uhci-hcd lspci: 00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 02) 00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 22) 00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 10) 00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 10) 00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 10) 00:07.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30) 00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 20) 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 43) 01:00.0 VGA compatible controller: nVidia Corporation NV5 [RIVA TNT2 Ultra] (rev 15) cat /proc/cpuinfo: processor : 0 vendor_id : AuthenticAMD cpu family : 6 model : 3 model name : AMD Duron(tm) Processor stepping : 0 cpu MHz : 700.053 cache size : 64 KB fdiv_bug : no hlt_bug : yes f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu tsc msr pae mce cx8 apic mtrr mca cmov pat pse36 mmx fxsr pni syscall mmxext 3dnowext 3dnow bogomips : 1399.19 Regards, Luciano Rocha -- 2/16
