Le mercredi 26 janvier 2005 Ã 19:25 +0000, David Woodhouse a Ãcrit : > (Originally sent to fedora-config-list but trapped for moderation, and I > may get volunteers here too...) > > Fedora Core 3 supports PPP over ATM (PPPoA) with any DSL modem which the > kernel can use as an ATM device -- currently that's only USB modems > based on the Alcatel SpeedTouch chipset No :-) Fedora Core 3 works near perfectly with Bewan modem. I use a Bewan PCI ST with pppoatm. pppoeth also works but need some tricks. Other people success to use Bewan USB ST modem. Package for Bewan modem : http://feliciano.matias.free.fr/bewan/FC3/ README file is missing :-) The kernel-2.6.10-1.741_FC3.bewan is just because Bewan does not support "CONFIG_REGPARM". I only need to create a /etc/sysconfig/network-scripts/ifcfg-ppp0 file. NB: Bewan is a proprietary driver. > , but we're working on more > hardware drivers. > > The updated packages in rawhide also support PPP over Ethernet over ATM. > (PPPoE with a real DSL modem, not over _real_ Ethernet to an external > DSL modem/bridge). pppoeth with bewan ("real DSL modem") works. In ifcfg-ppp0 I set : ETH=dsl0 > That should work fine in FC3 too if you update your > rp-pppoe and install linux-atm packages from the yum repo at > ftp://ftp.infradead.org/pub/linux-atm/ > > To connect, first you need to install the firmware for your modem > into /lib/firmware (see the speedtouch-firmware.nosrc.rpm in the same > FTP directory) and then you need to configure it. You can just set up an > xDSL connection with system-config-network, then modify the resulting > configuation file /etc/sysconfig/network-scripts/ifcfg-ppp0 as follows. > > For PPPoA, remove the 'ETH=' line, and add something like: > LINUX_PLUGIN=pppoatm.so > VCI=0 > VPI=38 > > Replace the '0' and '38' with the appropriate values for your ISP. > There's > a table at http://linux- > usb.sourceforge.net/SpeedTouch/faq/index.html#q12 > which may help. > > For PPPoE, also remove the 'ETH=' line, and add: > LINUX_PLUGIN=rp-pppoe.so > BR2684DEV=0 > VCI=0 > VPI=38 > > (again with corrected VCI= and VPI= values). > > It would be useful if system-config-network could do that for you. Any > volunteers for doing that? There's an update for the 'New Device' UI at > http://david.woodhou.se/ADSLInterfaceDruid.glade but I don't talk > Python, and system-config-network from CVS doesn't even build at the > moment due to autocrap problems. > > All we need to do is make 'DSL modem' one of the options in the newly- > renamed 'Hardware device' box. Then if 'DSL modem' isn't chosen, shade > out the options for VCI, VPI and protocol. If it _is_ chosen, then write > out the config file according to the above instructions. > > The UI for _editing_ devices also wants to be updated similarly. > > It might also be useful to extend the providerdb with VPI/VCI/proto > information for various ISPs. > > In the longer term, kudzu could perhaps learn to look > in /proc/net/atm/devices for ATM-capable devices, but that wouldn't show > up a SpeedTouch modem before its firmware is present anyway, so I > wouldn't want that to be the _only_ way the user can choose to use a DSL > modem. >
Attachment:
signature.asc
Description: Ceci est une partie de message =?ISO-8859-1?Q?num=E9riquement?= =?ISO-8859-1?Q?_sign=E9e?=
