Hi guys,
I'm having trouble starting a network bridge from a script without restarting
the server.
I am following this doc in order to configure a bridged network on a Fedora 23
Server host:
https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/7/html/Networking_Guide/sec-Network_Bridging_Using_the_Command_Line_Interface.html#sec-Create_a_Network_Bridge
my config files look like this:
# cat /etc/sysconfig/network-scripts/ifcfg-br0
DEVICE=br0
TYPE=Bridge
ONBOOT=yes
BOOTPROTO=dhcp
DELAY=0
# cat /etc/sysconfig/network-scripts/ifcfg-enp1s0f0
Generated by dracut initrd
NAME="enp1s0f0"
DEVICE="enp1s0f0"
ONBOOT=yes
NETBOOT=yes
UUID="58081eef-9d1f-48db-a565-65f45bd1c6e8"
IPV6INIT=yes
BOOTPROTO=none
TYPE=Ethernet
BRIDGE=br0
After that I do:
# systemctl restart network
Job for network.service failed because the control process exited with error
code. See "systemctl status network.service" and "journalctl -xe" for details.
# systemctl status network -l
● network.service - LSB: Bring up/down networking
Loaded: loaded (/etc/rc.d/init.d/network)
Active: failed (Result: exit-code) since ср 2016-05-04 10:33:32 EDT; 2min
43s ago
Docs: man:systemd-sysv-generator(8)
Process: 1412 ExecStart=/etc/rc.d/init.d/network start (code=exited,
status=1/FAILURE)
май 04 10:33:32 amd-dinar-02.lab.bos.redhat.com network[1412]: [ OK ]
май 04 10:33:32 amd-dinar-02.lab.bos.redhat.com network[1412]: Bringing up
interface enp1s0f0: /etc/sysconfig/network-scripts/ifcfg-enp1s0f0: line 1:
Generated: command not found
май 04 10:33:32 amd-dinar-02.lab.bos.redhat.com network[1412]: [ OK ]
май 04 10:33:32 amd-dinar-02.lab.bos.redhat.com network[1412]: Bringing up
interface enp1s0f1: Error: Connection activation failed: No suitable device
found for this connection.
май 04 10:33:32 amd-dinar-02.lab.bos.redhat.com network[1412]: [FAILED]
май 04 10:33:32 amd-dinar-02.lab.bos.redhat.com network[1412]: Bringing up
interface br0: [ OK ]
май 04 10:33:32 amd-dinar-02.lab.bos.redhat.com systemd[1]: network.service:
Control process exited, code=exited status=1
май 04 10:33:32 amd-dinar-02.lab.bos.redhat.com systemd[1]: Failed to start LSB:
Bring up/down networking.
май 04 10:33:32 amd-dinar-02.lab.bos.redhat.com systemd[1]: network.service:
Unit entered failed state.
май 04 10:33:32 amd-dinar-02.lab.bos.redhat.com systemd[1]: network.service:
Failed with result 'exit-code'.
After the failure the network config looks like this:
# ip a s
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp1s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group
default qlen 1000
link/ether 00:00:1a:1a:94:70 brd ff:ff:ff:ff:ff:ff
inet 10.16.42.33/21 brd 10.16.47.255 scope global dynamic enp1s0f0
valid_lft 86204sec preferred_lft 86204sec
inet6 2620:52:0:102f:200:1aff:fe1a:9470/64 scope global noprefixroute dynamic
valid_lft 2591805sec preferred_lft 604605sec
inet6 fe80::200:1aff:fe1a:9470/64 scope link
valid_lft forever preferred_lft forever
3: enp1s0f1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN
group default qlen 1000
link/ether 00:00:1a:1a:94:71 brd ff:ff:ff:ff:ff:ff
4: br0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN
group default qlen 1000
link/ether 16:db:ac:3b:24:d4 brd ff:ff:ff:ff:ff:ff
inet6 fe80::14db:acff:fe3b:24d4/64 scope link
valid_lft forever preferred_lft forever
If I reboot the system the bridge appears to be up and running:
**after reboot**
# ip a s
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp1s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master br0
state UP group default qlen 1000
link/ether 00:00:1a:1a:94:70 brd ff:ff:ff:ff:ff:ff
3: enp1s0f1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN
group default qlen 1000
link/ether 00:00:1a:1a:94:71 brd ff:ff:ff:ff:ff:ff
4: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group
default qlen 1000
link/ether 00:00:1a:1a:94:70 brd ff:ff:ff:ff:ff:ff
inet 10.16.42.33/21 brd 10.16.47.255 scope global dynamic br0
valid_lft 86391sec preferred_lft 86391sec
inet6 2620:52:0:102f:200:1aff:fe1a:9470/64 scope global mngtmpaddr dynamic
valid_lft 2591988sec preferred_lft 604788sec
inet6 fe80::b496:e5ff:fe89:49e3/64 scope link
valid_lft forever preferred_lft forever
This is with systemd-222-14.fc23.x86_64 but I have no idea if it is systemd to
blame, probably not. The system is used for automated tests and it can't be
restarted after the network changes are done for them to take effect. It is also
a deviation from the latest official docs I was able to find and may indicate a
hidden bug.
Does anyone know what is going on here and how to resolve the problem ?
Thanks,
Alex
--
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxxx
http://lists.fedoraproject.org/admin/lists/devel@xxxxxxxxxxxxxxxxxxxxxxx
