rawhide images/pxeboot issue?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I've been unable to boot into the Raw Hide
images/pxeboot/{vmlinuz,initrd.img} for a few days, is that just me or
is something borked?

2.6.9-1.650_devel fails like:

EXT2-fs: unable to read superblock
isofs_fill_super: bread failed, dev=md0, iso_blknum=16, block=32
Kernel panic - not syncing: VFS: Unable to mount root fs on 
unknown-block(9,0)

(then loops forever saying:

<4>atkbd.c: Spurious ACK on isa0060/serio0. Some program, like 
XFree86, might be trying access hardware directly.
atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, 
ight be trying access hardware directly.

but I guess that's something different)

Linux version 2.6.9-1.650_devel (bhcompile@xxxxxxxxxxxxxxxxxxxxx) (gcc version 3.4.3 20041114 (Red Hat 3.4.3-3)) #1 Mon Nov 15 18:55:19 EST 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e7000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000040fdc00 (usable)
 BIOS-e820: 00000000040fdc00 - 00000000040ff800 (ACPI data)
 BIOS-e820: 00000000040ff800 - 00000000040ffc00 (ACPI NVS)
 BIOS-e820: 00000000040ffc00 - 0000000020000000 (usable)
 BIOS-e820: 00000000fffe7000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
512MB LOWMEM available.
zapping low mappings.
DMI 2.1 present.
ACPI: BIOS age (1998) fails cutoff (2001), acpi=force is required to enable ACPI
ACPI: Disabling ACPI support
Built 1 zonelists
Kernel command line: ks=http://tantra/~jorton/boot/trash.ks console=ttyS1,9600
Initializing CPU#0
CPU 0 irqstacks, hard=c03e2000 soft=c03e1000
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 398.325 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 512148k/524288k available (2113k kernel code, 11576k reserved, 653k data, 144k init, 0k highmem)
Security Scaffold v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Pentium II (Deschutes) stepping 01
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 3323k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd9a3, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
audit: initializing netlink socket (disabled)
audit(1101136707.169:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 9ADF323F9B7F3153
- User ID: Red Hat, Inc. (Kernel Module GPG key)
Limiting direct PCI/PCI transfers.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: probe of vesafb0 failed with error -6
isapnp: Scanning for PnP cards...
isapnp: Card 'CS4236B'
isapnp: 1 Plug & Play card detected total
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 440BX Chipset.
agpgart: Maximum main memory to use for agp memory: 440M
agpgart: AGP aperture is 64M @ 0xf8000000
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ïttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1460-0x1467, BIOS settings: hda:pio, hdb:DMA
    ide1: BM-DMA at 0x1468-0x146f, BIOS settings: hdc:DMA, hdd:pio
hda: QUANTUM FIREBALL CR13.0A, ATA DISK drive
hdb: QUANTUM FIREBALLP KX27.3, ATA DISK drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: SAMSUNG CD-ROM SCR-3231, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 25429824 sectors (13020 MB) w/418KiB Cache, CHS=25228/16/63, UDMA(33)
 hda: hda1 hda2 hda3
hdb: max request size: 128KiB
hdb: 53550304 sectors (27417 MB) w/418KiB Cache, CHS=53125/16/63, UDMA(33)
 hdb: hdb1 hdb2
hdc: ATAPI 32X CD-ROM drive, 512kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 32Kbytes
TCP: Hash tables configured (established 131072 bind 37449)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
md: Autodetecting RAID arrays.
md: autorun ...
md: considering hdb2 ...
md:  adding hdb2 ...
md:  adding hda3 ...
md: created md0
md: bind<hda3>
md: bind<hdb2>
md: running: <hdb2><hda3>
md: personality 2 is not loaded!
md :do_md_run() returned -22
md: md0 stopped.
md: unbind<hdb2>
md: export_rdev(hdb2)
md: unbind<hda3>
md: export_rdev(hda3)
md: ... autorun DONE.
EXT2-fs: unable to read superblock
isofs_fill_super: bread failed, dev=md0, iso_blknum=16, block=32
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(9,0)
 <4>atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly.
atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly.
atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly.
atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly.
atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly.
atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Fedora Announce]     [Fedora Kernel]     [Fedora Testing]     [Fedora Formulas]     [Fedora PHP Devel]     [Kernel Development]     [Fedora Legacy]     [Fedora Maintainers]     [Fedora Desktop]     [PAM]     [Red Hat Development]     [Gimp]     [Yosemite News]
  Powered by Linux