On Mon, Apr 14, 2014 at 9:06 AM, Dan Williams <dcbw@xxxxxxxxxx> wrote: > On Mon, 2014-04-14 at 12:00 -0400, Paul Wouters wrote: >> On Mon, 14 Apr 2014, Dan Williams wrote: >> >> > But another scenario I've seen: older Netgear routers which intercept >> > "www.routerlogin.net" as the setup page. The instructions literally >> > are: >> > >> > 1) connect your computer to the router with a cable >> > 2) go to www.routerlogin.net >> > 3) follow the setup guide instructions >> > >> > Any idea how dnssec-trigger + unbound would handle this? Since it's >> > router setup, maybe spawning the whole new window for the "portal" would >> > work, but you'd want to make sure the window didn't go away or DNS >> > didn't change until the user was done setting up the router. >> >> I don't know what they do when you query for anything else. If there is >> no hotspot redirection on port 80/443 and their DNS server works >> properly, and your wifi was secure, you would then get their forward >> and the above would work. If it is an open wifi, we would not install > > Since the user is setting things up, they can pick whether it's open or > protected wifi. We don't control that. > >> the forward and you would not get there. but in the current setup, you >> can pick "hotspot login" mode and it puts their DNS in place, and than >> you will reach it. Note that manual hotspot login sessions require you > > Ok, that could be a problem. This is a user setting up wifi on a router > they just bought, so it has no upstream connection yet, is not yet > configured at all, and they are just following the directions in the > printed brochure they got with the router. Which obviously won't say > anything about "hotspot login" mode. > > Also, this is the procedure you follow if you reset the router to > factory defaults, which support people sometimes tell you to do. So > we'd run into the issue if/when the user contacted Netgear technical > support too. If you want to get really fancy, you could try to detect a state in which there is no connection to the internet, the router has an address 192.168.*.1, and the router is listening on TCP port 80, and suggest an alternate "you are connected to a possibly unconfigured router" mode. --Andy -- devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/devel Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct
