Hello All there are many bug reports on this issue I have attached the file and hope someone can help me.
On Sun, 10 Jul 2011 12:22:37 -0500
Bruno Wolff III <bruno@xxxxxxxx> wrote:
> On Sun, Jul 10, 2011 at 12:23:21 -0400,
> ceco <cfunder108@xxxxxxxxx> wrote:
> > Ok folks I know everyone is busy but it's time to actually sit down and write a driver for the ATI Radeon card used in a lot of laptops. This has been a topic/bug in the forums since 2008 without being resolved and the work-arounds aren't working. The garbled display is really getting to be overwhelming and the symantic touchpad is not functional and this is been going on since Fedore 13 and Ubuntu 10. It seem Linux is turning into an Intel/Dell shop. I'm running on a Gateway netbook LT3101u CPU - AMD ATHLON 64 ATI Radeon graphic card.
> > +++ I am a simple user -- I'm not a developer or programmer by any means or form. So please Help us out.++++
>
> Have you filled out a bug report for your issue? (Note that if you do, you
> need to include details about which card you actually have, as what you
> included doesn't provide that information. /var/log/Xorg.0.log will usually
> have the required information as well as lspci -vvv .)
>
> 3D support is still spotty in Fedora, but it is mostly getting better. In the
> meantime you could also look at using a proprietary driver from rpmfusion
> and see if that works better for you.
--
ceco
00:00.0 Host bridge: ATI Technologies Inc RS690 Host Bridge
Subsystem: Acer Incorporated [ALI] Device 028c
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64
00:01.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00009000-00009fff
Memory behind bridge: f0000000-f01fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [44] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [b0] Subsystem: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx)
Kernel modules: shpchp
00:05.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: 80000000-800fffff
Prefetchable memory behind bridge: 00000000cfd00000-00000000cfdfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #4, PowerLimit 25.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0100c Data: 4129
Capabilities: [b0] Subsystem: Acer Incorporated [ALI] Device 028c
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Kernel driver in use: pcieport
Kernel modules: shpchp
00:06.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f0200000-f02fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #6, PowerLimit 25.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0100c Data: 4141
Capabilities: [b0] Subsystem: Acer Incorporated [ALI] Device 028c
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Kernel driver in use: pcieport
Kernel modules: shpchp
00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA (prog-if 01 [AHCI 1.0])
Subsystem: Acer Incorporated [ALI] Device 028c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at 8440 [size=8]
Region 1: I/O ports at 8434 [size=4]
Region 2: I/O ports at 8438 [size=8]
Region 3: I/O ports at 8430 [size=4]
Region 4: I/O ports at 8400 [size=16]
Region 5: Memory at f0507000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ahci
00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0) (prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI] Device 028c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0504000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1) (prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI] Device 028c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f0505000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3) (prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI] Device 028c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f0506000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI) (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] Device 028c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 19
Region 0: Memory at f0507400 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci_hcd
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14)
Subsystem: Acer Incorporated [ALI] Device 028c
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at 8410 [size=16]
Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: piix4_smbus
Kernel modules: sp5100_tco, i2c-piix4
00:14.1 IDE interface: ATI Technologies Inc SB600 IDE (prog-if 8a [Master SecP PriP])
Subsystem: Acer Incorporated [ALI] Device 028c
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 8420 [size=16]
Kernel driver in use: pata_atiixp
Kernel modules: ata_generic, pata_acpi, pata_atiixp
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
Subsystem: Acer Incorporated [ALI] Device 028c
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin ? routed to IRQ 16
Region 0: Memory at f0500000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge
Subsystem: Acer Incorporated [ALI] Device 028c
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=09, subordinate=09, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: fff00000-000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [80] HyperTransport: Host or Secondary Interface
Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=8 IsocEn- LSEn+ ExtCTL- 64b+
Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
Revision ID: 1.02
Link Frequency: 800MHz
Link Error: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- ExtRS- UCnfE-
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel modules: amd64_edac_mod
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [f0] Secure device <?>
Kernel driver in use: k8temp
Kernel modules: k8temp
01:05.0 VGA compatible controller: ATI Technologies Inc RS690M [Radeon X1200 Series] (prog-if 00 [VGA controller])
Subsystem: Acer Incorporated [ALI] Device 028c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at f0100000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at 9000 [size=256]
Region 5: Memory at f0000000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Kernel driver in use: radeon
Kernel modules: radeon
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
Subsystem: Acer Incorporated [ALI] Device 028c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 42
Region 0: I/O ports at a000 [size=256]
Region 2: Memory at cfdef000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at cfdf0000 (64-bit, prefetchable) [size=64K]
[virtual] Expansion ROM at cfd00000 [disabled] [size=64K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0100c Data: 4171
Capabilities: [70] Express (v2) Endpoint, MSI 01
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <128ns, L1 <2us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [ac] MSI-X: Enable- Count=2 Masked-
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [cc] Vital Product Data
Unknown small resource type 00, will not decode more.
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 00-00-00-00-00-00-00-00
Kernel driver in use: r8169
Kernel modules: r8169
04:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
Subsystem: Foxconn International, Inc. Device e016
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f0200000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [60] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 00-15-17-ff-ff-24-14-12
Capabilities: [170 v1] Power Budgeting <?>
Kernel driver in use: ath9k
Kernel modules: ath9k
use: X [:<display>] [option]
-a # default pointer acceleration (factor)
-ac disable access control restrictions
-audit int set audit trail level
-auth file select authorization file
-br create root window with black background
+bs enable any backing store support
-bs disable any backing store support
-c turns off key-click
c # key-click volume (0-100)
-cc int default color visual class
-nocursor disable the cursor
-core generate core dump on fatal error
-dpi int screen resolution in dots per inch
-dpms disables VESA DPMS monitor control
-deferglyphs [none|all|16] defer loading of [no|all|16-bit] glyphs
-f # bell base (0-100)
-fc string cursor font
-fn string default font name
-fp string default font path
-help prints message with these options
-I ignore all remaining arguments
-ld int limit data space to N Kb
-lf int limit number of open files to N
-ls int limit stack space to N Kb
-nolock disable the locking mechanism
-nolisten string don't listen on protocol
-noreset don't reset after last client exists
-background [none] create root window with no background
-reset reset after last client exists
-p # screen-saver pattern duration (minutes)
-pn accept failure to listen on all ports
-nopn reject failure to listen on all ports
-r turns off auto-repeat
r turns on auto-repeat
-render [default|mono|gray|color] set render color alloc policy
-retro start with classic stipple and cursor
-s # screen-saver timeout (minutes)
-t # default pointer threshold (pixels/t)
-terminate terminate at server reset
-to # connection time out
-tst disable testing extensions
ttyxx server started from init on /dev/ttyxx
v video blanking for screen-saver
-v screen-saver without video blanking
-wm WhenMapped default backing-store
-wr create root window with white background
-maxbigreqsize set maximal bigrequest size
+xinerama Enable XINERAMA extension
-xinerama Disable XINERAMA extension
-dumbSched Disable smart scheduling, enable old behavior
-schedInterval int Set scheduler interval in msec
-sigstop Enable SIGSTOP based startup
+extension name Enable extension
-extension name Disable extension
-query host-name contact named host for XDMCP
-broadcast broadcast for XDMCP
-multicast [addr [hops]] IPv6 multicast for XDMCP
-indirect host-name contact named host for indirect XDMCP
-port port-num UDP port number to send messages to
-from local-address specify the local address to connect from
-once Terminate server after one session
-class display-class specify display class to send in manage
-cookie xdm-auth-bits specify the magic cookie for XDMCP
-displayID display-id manufacturer display ID for request
[+-]accessx [ timeout [ timeout_mask [ feedback [ options_mask] ] ] ]
enable/disable accessx key sequences
-ardelay set XKB autorepeat delay
-arinterval set XKB autorepeat interval
Device Dependent Usage
-modulepath paths specify the module search path
-logfile file specify a log file name
-configure probe for devices and write an xorg.conf
-showopts print available options for all installed drivers
-config file specify a configuration file, relative to the
xorg.conf search path, only root can use absolute
-configdir dir specify a configuration directory, relative to the
xorg.conf.d search path, only root can use absolute
-verbose [n] verbose startup messages
-logverbose [n] verbose log messages
-quiet minimal startup messages
-pixmap24 use 24bpp pixmaps for depth 24
-pixmap32 use 32bpp pixmaps for depth 24
-fbbpp n set bpp for the framebuffer. Default: 8
-depth n set colour depth. Default: 8
-gamma f set gamma value (0.1 < f < 10.0) Default: 1.0
-rgamma f set gamma value for red phase
-ggamma f set gamma value for green phase
-bgamma f set gamma value for blue phase
-weight nnn set RGB weighting at 16 bpp. Default: 565
-layout name specify the ServerLayout section name
-screen name specify the Screen section name
-keyboard name specify the core keyboard InputDevice name
-pointer name specify the core pointer InputDevice name
-nosilk disable Silken Mouse
-flipPixels swap default black/white Pixel values
-disableVidMode disable mode adjustments with xvidtune
-allowNonLocalXvidtune allow xvidtune to be run as a non-local client
-allowMouseOpenFail start server even if the mouse can't be initialized
-ignoreABI make module ABI mismatches non-fatal
-isolateDevice bus_id restrict device resets to bus_id (PCI only)
-version show the server version
-showDefaultModulePath show the server default module path
-showDefaultLibPath show the server default library path
vtXX use the specified VT number
-keeptty don't detach controlling tty (for debugging only)
-novtswitch don't immediately switch to new VT
-sharevts share VTs with another X server
[ 56.048]
X.Org X Server 1.10.1
Release Date: 2011-04-15
[ 56.048] X Protocol Version 11, Revision 0
[ 56.048] Build Operating System: x86-04 2.6.32-71.14.1.el6.x86_64
[ 56.049] Current Operating System: Linux pselil01.psellc 2.6.38.6-26.rc1.fc15.x86_64 #1 SMP Mon May 9 20:45:15 UTC 2011 x86_64
[ 56.050] Kernel command line: ro root=/dev/mapper/vg_pselil01-lv_root rd_LVM_LV=vg_pselil01/lv_root rd_LVM_LV=vg_pselil01/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet
[ 56.050] Build Date: 28 April 2011 03:50:45AM
[ 56.050] Build ID: xorg-x11-server 1.10.1-14.fc15
[ 56.050] Current version of pixman: 0.20.2
[ 56.050] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 56.050] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 56.051] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 11 18:41:50 2011
[ 56.066] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 56.066] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 56.121] (==) No Layout section. Using the first Screen section.
[ 56.121] (==) No screen section available. Using defaults.
[ 56.121] (**) |-->Screen "Default Screen Section" (0)
[ 56.121] (**) | |-->Monitor "<default monitor>"
[ 56.135] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 56.135] (==) Automatically adding devices
[ 56.135] (==) Automatically enabling devices
[ 56.135] (==) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins
[ 56.135] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 56.135] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 56.135] (II) Loader magic: 0x7d3740
[ 56.135] (II) Module ABI versions:
[ 56.135] X.Org ANSI C Emulation: 0.4
[ 56.135] X.Org Video Driver: 10.0
[ 56.135] X.Org XInput driver : 12.2
[ 56.135] X.Org Server Extension : 5.0
[ 56.139] (--) PCI:*(0:1:5:0) 1002:791f:1025:028c rev 0, Mem @ 0xd0000000/268435456, 0xf0100000/65536, 0xf0000000/1048576, I/O @ 0x00009000/256, BIOS @ 0x????????/131072
[ 56.140] (II) LoadModule: "extmod"
[ 56.160] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[ 56.189] (II) Module extmod: vendor="X.Org Foundation"
[ 56.189] compiled for 1.10.1, module version = 1.0.0
[ 56.189] Module class: X.Org Server Extension
[ 56.189] ABI class: X.Org Server Extension, version 5.0
[ 56.189] (II) Loading extension SELinux
[ 56.189] (II) Loading extension MIT-SCREEN-SAVER
[ 56.189] (II) Loading extension XFree86-VidModeExtension
[ 56.189] (II) Loading extension XFree86-DGA
[ 56.189] (II) Loading extension DPMS
[ 56.189] (II) Loading extension XVideo
[ 56.189] (II) Loading extension XVideo-MotionCompensation
[ 56.189] (II) Loading extension X-Resource
[ 56.189] (II) LoadModule: "dbe"
[ 56.190] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[ 56.200] (II) Module dbe: vendor="X.Org Foundation"
[ 56.200] compiled for 1.10.1, module version = 1.0.0
[ 56.200] Module class: X.Org Server Extension
[ 56.200] ABI class: X.Org Server Extension, version 5.0
[ 56.200] (II) Loading extension DOUBLE-BUFFER
[ 56.200] (II) LoadModule: "glx"
[ 56.201] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 56.203] (II) Module glx: vendor="X.Org Foundation"
[ 56.203] compiled for 1.10.1, module version = 1.0.0
[ 56.203] ABI class: X.Org Server Extension, version 5.0
[ 56.204] (==) AIGLX enabled
[ 56.204] (II) Loading extension GLX
[ 56.204] (II) LoadModule: "record"
[ 56.205] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[ 56.219] (II) Module record: vendor="X.Org Foundation"
[ 56.219] compiled for 1.10.1, module version = 1.13.0
[ 56.219] Module class: X.Org Server Extension
[ 56.219] ABI class: X.Org Server Extension, version 5.0
[ 56.219] (II) Loading extension RECORD
[ 56.219] (II) LoadModule: "dri"
[ 56.220] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
[ 56.221] (II) Module dri: vendor="X.Org Foundation"
[ 56.221] compiled for 1.10.1, module version = 1.0.0
[ 56.221] ABI class: X.Org Server Extension, version 5.0
[ 56.221] (II) Loading extension XFree86-DRI
[ 56.221] (II) LoadModule: "dri2"
[ 56.222] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
[ 56.223] (II) Module dri2: vendor="X.Org Foundation"
[ 56.223] compiled for 1.10.1, module version = 1.2.0
[ 56.223] ABI class: X.Org Server Extension, version 5.0
[ 56.223] (II) Loading extension DRI2
[ 56.223] (==) Matched ati as autoconfigured driver 0
[ 56.223] (==) Matched vesa as autoconfigured driver 1
[ 56.223] (==) Matched fbdev as autoconfigured driver 2
[ 56.223] (==) Assigned the driver to the xf86ConfigLayout
[ 56.223] (II) LoadModule: "ati"
[ 56.224] (II) Loading /usr/lib64/xorg/modules/drivers/ati_drv.so
[ 56.237] (II) Module ati: vendor="X.Org Foundation"
[ 56.237] compiled for 1.10.1, module version = 6.14.99
[ 56.237] Module class: X.Org Video Driver
[ 56.237] ABI class: X.Org Video Driver, version 10.0
[ 56.237] (II) LoadModule: "radeon"
[ 56.238] (II) Loading /usr/lib64/xorg/modules/drivers/radeon_drv.so
[ 56.292] (II) Module radeon: vendor="X.Org Foundation"
[ 56.292] compiled for 1.10.1, module version = 6.14.99
[ 56.292] Module class: X.Org Video Driver
[ 56.292] ABI class: X.Org Video Driver, version 10.0
[ 56.293] (II) LoadModule: "vesa"
[ 56.294] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[ 56.303] (II) Module vesa: vendor="X.Org Foundation"
[ 56.303] compiled for 1.10.0, module version = 2.3.0
[ 56.303] Module class: X.Org Video Driver
[ 56.303] ABI class: X.Org Video Driver, version 10.0
[ 56.303] (II) LoadModule: "fbdev"
[ 56.304] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[ 56.313] (II) Module fbdev: vendor="X.Org Foundation"
[ 56.313] compiled for 1.10.0, module version = 0.4.1
[ 56.313] ABI class: X.Org Video Driver, version 10.0
[ 56.313] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, ATI Radeon HD 4200, ATI Radeon 4100,
ATI Mobility Radeon HD 4200, ATI Mobility Radeon 4100,
ATI Radeon HD 4290, ATI Radeon HD 4250, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, AMD Radeon HD 6900 Series,
AMD Radeon HD 6900 Series, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS
[ 56.327] (II) VESA: driver for VESA chipsets: vesa
[ 56.327] (II) FBDEV: driver for framebuffer: fbdev
[ 56.327] (++) using VT number 1
[ 56.332] (II) Loading /usr/lib64/xorg/modules/drivers/radeon_drv.so
[ 56.333] (II) [KMS] Kernel modesetting enabled.
[ 56.333] (WW) Falling back to old probe method for vesa
[ 56.333] (WW) Falling back to old probe method for fbdev
[ 56.333] (II) Loading sub module "fbdevhw"
[ 56.333] (II) LoadModule: "fbdevhw"
[ 56.333] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[ 56.346] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 56.346] compiled for 1.10.1, module version = 0.0.2
[ 56.346] ABI class: X.Org Video Driver, version 10.0
[ 56.356] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 56.356] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 56.356] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 56.356] (==) RADEON(0): Default visual is TrueColor
[ 56.356] (==) RADEON(0): RGB weight 888
[ 56.357] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 56.357] (--) RADEON(0): Chipset: "ATI Radeon X1200" (ChipID = 0x791f)
[ 56.357] (II) RADEON(0): PCI card detected
[ 56.357] drmOpenDevice: node name is /dev/dri/card0
[ 56.357] drmOpenDevice: open result is 11, (OK)
[ 56.357] drmOpenByBusid: Searching for BusID pci:0000:01:05.0
[ 56.357] drmOpenDevice: node name is /dev/dri/card0
[ 56.357] drmOpenDevice: open result is 11, (OK)
[ 56.357] drmOpenByBusid: drmOpenMinor returns 11
[ 56.357] drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
[ 56.357] (II) Loading sub module "exa"
[ 56.357] (II) LoadModule: "exa"
[ 56.358] (II) Loading /usr/lib64/xorg/modules/libexa.so
[ 56.366] (II) Module exa: vendor="X.Org Foundation"
[ 56.366] compiled for 1.10.1, module version = 2.5.0
[ 56.366] ABI class: X.Org Video Driver, version 10.0
[ 56.366] (II) RADEON(0): KMS Color Tiling: enabled
[ 56.366] (II) RADEON(0): KMS Pageflipping: enabled
[ 56.366] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 56.494] (II) RADEON(0): Output VGA-0 has no monitor section
[ 56.494] (II) RADEON(0): Output LVDS has no monitor section
[ 56.622] (II) RADEON(0): EDID for output VGA-0
[ 56.622] (II) RADEON(0): EDID for output LVDS
[ 56.622] (II) RADEON(0): Manufacturer: AUO Model: 205c Serial#: 0
[ 56.622] (II) RADEON(0): Year: 2008 Week: 1
[ 56.622] (II) RADEON(0): EDID Version: 1.3
[ 56.622] (II) RADEON(0): Digital Display Input
[ 56.622] (II) RADEON(0): Max Image Size [cm]: horiz.: 26 vert.: 14
[ 56.622] (II) RADEON(0): Gamma: 2.20
[ 56.622] (II) RADEON(0): No DPMS capabilities specified
[ 56.622] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 56.622] (II) RADEON(0): First detailed timing is preferred mode
[ 56.622] (II) RADEON(0): redX: 0.584 redY: 0.333 greenX: 0.338 greenY: 0.571
[ 56.622] (II) RADEON(0): blueX: 0.158 blueY: 0.133 whiteX: 0.313 whiteY: 0.329
[ 56.622] (II) RADEON(0): Manufacturer's mask: 0
[ 56.622] (II) RADEON(0): Supported detailed timing:
[ 56.622] (II) RADEON(0): clock: 72.0 MHz Image Size: 256 x 144 mm
[ 56.622] (II) RADEON(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1494 h_border: 0
[ 56.622] (II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 803 v_border: 0
[ 56.622] (II) RADEON(0): Unknown vendor-specific block f
[ 56.622] (II) RADEON(0): AUO
[ 56.622] (II) RADEON(0): B116XW02 V0
[ 56.622] (II) RADEON(0): EDID (in hex):
[ 56.622] (II) RADEON(0): 00ffffffffffff0006af5c2000000000
[ 56.622] (II) RADEON(0): 01120103801a0e780a99859555569228
[ 56.622] (II) RADEON(0): 22505400000001010101010101010101
[ 56.622] (II) RADEON(0): 010101010101201c5680500023303020
[ 56.622] (II) RADEON(0): 36000090100000180000000f00000000
[ 56.623] (II) RADEON(0): 00000000000000000020000000fe0041
[ 56.623] (II) RADEON(0): 554f0a202020202020202020000000fe
[ 56.623] (II) RADEON(0): 004231313658573032205630200a00be
[ 56.631] (II) RADEON(0): Printing probed modes for output LVDS
[ 56.631] (II) RADEON(0): Modeline "1366x768"x60.0 72.00 1366 1414 1446 1494 768 771 777 803 -hsync -vsync (48.2 kHz)
[ 56.631] (II) RADEON(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz)
[ 56.631] (II) RADEON(0): Modeline "1152x768"x59.8 71.75 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 56.631] (II) RADEON(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz)
[ 56.631] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 56.631] (II) RADEON(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 56.631] (II) RADEON(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz)
[ 56.631] (II) RADEON(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz)
[ 56.631] (II) RADEON(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz)
[ 56.631] (II) RADEON(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz)
[ 56.631] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 56.631] (II) RADEON(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 56.631] (II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 56.631] (II) RADEON(0): Modeline "848x480"x59.7 31.50 848 872 952 1056 480 483 493 500 -hsync +vsync (29.8 kHz)
[ 56.631] (II) RADEON(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz)
[ 56.631] (II) RADEON(0): Modeline "720x480"x59.7 26.75 720 744 808 896 480 483 493 500 -hsync +vsync (29.9 kHz)
[ 56.631] (II) RADEON(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz)
[ 56.631] (II) RADEON(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz)
[ 56.631] (II) RADEON(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 56.631] (II) RADEON(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 56.631] (II) RADEON(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz)
[ 56.631] (II) RADEON(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz)
[ 56.631] (II) RADEON(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz)
[ 56.631] (II) RADEON(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz)
[ 56.631] (II) RADEON(0): Output VGA-0 disconnected
[ 56.631] (II) RADEON(0): Output LVDS connected
[ 56.632] (II) RADEON(0): Using exact sizes for initial modes
[ 56.632] (II) RADEON(0): Output LVDS using initial mode 1366x768 +0+0
[ 56.632] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 56.632] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:18000000 visible:17ba0000
[ 56.632] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 56.632] (==) RADEON(0): DPI set to (96, 96)
[ 56.632] (II) Loading sub module "fb"
[ 56.632] (II) LoadModule: "fb"
[ 56.632] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 56.646] (II) Module fb: vendor="X.Org Foundation"
[ 56.646] compiled for 1.10.1, module version = 1.0.0
[ 56.646] ABI class: X.Org ANSI C Emulation, version 0.4
[ 56.646] (II) Loading sub module "ramdac"
[ 56.646] (II) LoadModule: "ramdac"
[ 56.646] (II) Module "ramdac" already built-in
[ 56.646] (II) UnloadModule: "vesa"
[ 56.646] (II) Unloading vesa
[ 56.647] (II) UnloadModule: "fbdev"
[ 56.647] (II) Unloading fbdev
[ 56.647] (II) UnloadModule: "fbdevhw"
[ 56.647] (II) Unloading fbdevhw
[ 56.647] (--) Depth 24 pixmap format is 32 bpp
[ 56.647] (II) RADEON(0): [DRI2] Setup complete
[ 56.647] (II) RADEON(0): [DRI2] DRI driver: r300
[ 56.647] (II) RADEON(0): Front buffer size: 4224K
[ 56.647] (II) RADEON(0): VRAM usage limit set to 346060K
[ 56.671] (==) RADEON(0): Backing store disabled
[ 56.671] (II) RADEON(0): Direct rendering enabled
[ 56.689] (II) RADEON(0): Render acceleration enabled for R300/R400/R500 type cards.
[ 56.689] (II) RADEON(0): Setting EXA maxPitchBytes
[ 56.689] (II) EXA(0): Driver allocated offscreen pixmaps
[ 56.689] (II) EXA(0): Driver registered support for the following operations:
[ 56.689] (II) Solid
[ 56.689] (II) Copy
[ 56.689] (II) Composite (RENDER acceleration)
[ 56.689] (II) UploadToScreen
[ 56.689] (II) DownloadFromScreen
[ 56.696] (II) RADEON(0): Acceleration enabled
[ 56.696] (==) RADEON(0): DPMS enabled
[ 56.696] (==) RADEON(0): Silken mouse enabled
[ 56.697] (II) RADEON(0): Set up textured video
[ 56.697] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 56.697] (--) RandR disabled
[ 56.697] (II) Initializing built-in extension Generic Event Extension
[ 56.697] (II) Initializing built-in extension SHAPE
[ 56.697] (II) Initializing built-in extension MIT-SHM
[ 56.697] (II) Initializing built-in extension XInputExtension
[ 56.697] (II) Initializing built-in extension XTEST
[ 56.697] (II) Initializing built-in extension BIG-REQUESTS
[ 56.698] (II) Initializing built-in extension SYNC
[ 56.698] (II) Initializing built-in extension XKEYBOARD
[ 56.698] (II) Initializing built-in extension XC-MISC
[ 56.698] (II) Initializing built-in extension XINERAMA
[ 56.698] (II) Initializing built-in extension XFIXES
[ 56.698] (II) Initializing built-in extension RENDER
[ 56.698] (II) Initializing built-in extension RANDR
[ 56.698] (II) Initializing built-in extension COMPOSITE
[ 56.698] (II) Initializing built-in extension DAMAGE
[ 56.715] (II) SELinux: Disabled by boolean
[ 57.433] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 57.433] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 57.433] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 57.433] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 57.433] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 57.434] (II) AIGLX: Loaded and initialized /usr/lib64/dri/r300_dri.so
[ 57.434] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 57.435] (II) RADEON(0): Setting screen physical size to 361 x 203
[ 57.887] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 57.887] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 57.887] (**) Power Button: Applying InputClass "system-setup-keyboard"
[ 57.888] (II) LoadModule: "evdev"
[ 57.888] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 57.898] (II) Module evdev: vendor="X.Org Foundation"
[ 57.898] compiled for 1.10.0, module version = 2.6.0
[ 57.898] Module class: X.Org XInput Driver
[ 57.898] ABI class: X.Org XInput driver, version 12.2
[ 57.898] (II) Using input driver 'evdev' for 'Power Button'
[ 57.898] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 57.898] (**) Power Button: always reports core events
[ 57.898] (**) Power Button: Device: "/dev/input/event3"
[ 57.898] (--) Power Button: Found keys
[ 57.898] (II) Power Button: Configuring as keyboard
[ 57.898] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 57.899] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 57.899] (**) Option "xkb_rules" "evdev"
[ 57.899] (**) Option "xkb_model" "pc105+inet"
[ 57.899] (**) Option "xkb_layout" "us"
[ 57.899] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,"
[ 57.980] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 57.980] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 57.980] (**) Video Bus: Applying InputClass "system-setup-keyboard"
[ 57.980] (II) Using input driver 'evdev' for 'Video Bus'
[ 57.980] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 57.980] (**) Video Bus: always reports core events
[ 57.980] (**) Video Bus: Device: "/dev/input/event6"
[ 57.980] (--) Video Bus: Found keys
[ 57.980] (II) Video Bus: Configuring as keyboard
[ 57.980] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:17/LNXVIDEO:00/input/input6/event6"
[ 57.980] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 57.980] (**) Option "xkb_rules" "evdev"
[ 57.980] (**) Option "xkb_model" "pc105+inet"
[ 57.980] (**) Option "xkb_layout" "us"
[ 57.980] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,"
[ 58.014] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 58.014] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 58.014] (**) Power Button: Applying InputClass "system-setup-keyboard"
[ 58.014] (II) Using input driver 'evdev' for 'Power Button'
[ 58.014] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 58.014] (**) Power Button: always reports core events
[ 58.014] (**) Power Button: Device: "/dev/input/event2"
[ 58.014] (--) Power Button: Found keys
[ 58.014] (II) Power Button: Configuring as keyboard
[ 58.014] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 58.014] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 58.014] (**) Option "xkb_rules" "evdev"
[ 58.014] (**) Option "xkb_model" "pc105+inet"
[ 58.014] (**) Option "xkb_layout" "us"
[ 58.014] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,"
[ 58.016] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 58.016] (II) No input driver/identifier specified (ignoring)
[ 58.017] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 58.017] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 58.017] (**) Sleep Button: Applying InputClass "system-setup-keyboard"
[ 58.017] (II) Using input driver 'evdev' for 'Sleep Button'
[ 58.017] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 58.017] (**) Sleep Button: always reports core events
[ 58.017] (**) Sleep Button: Device: "/dev/input/event1"
[ 58.017] (--) Sleep Button: Found keys
[ 58.017] (II) Sleep Button: Configuring as keyboard
[ 58.017] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[ 58.017] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 58.017] (**) Option "xkb_rules" "evdev"
[ 58.017] (**) Option "xkb_model" "pc105+inet"
[ 58.017] (**) Option "xkb_layout" "us"
[ 58.017] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,"
[ 58.031] (II) config/udev: Adding input device CNF9011 (/dev/input/event7)
[ 58.031] (**) CNF9011: Applying InputClass "evdev keyboard catchall"
[ 58.031] (**) CNF9011: Applying InputClass "system-setup-keyboard"
[ 58.031] (II) Using input driver 'evdev' for 'CNF9011'
[ 58.031] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 58.031] (**) CNF9011: always reports core events
[ 58.031] (**) CNF9011: Device: "/dev/input/event7"
[ 58.031] (--) CNF9011: Found keys
[ 58.031] (II) CNF9011: Configuring as keyboard
[ 58.031] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.5/usb1/1-4/1-4:1.0/input/input7/event7"
[ 58.031] (II) XINPUT: Adding extended input device "CNF9011" (type: KEYBOARD)
[ 58.031] (**) Option "xkb_rules" "evdev"
[ 58.031] (**) Option "xkb_model" "pc105+inet"
[ 58.032] (**) Option "xkb_layout" "us"
[ 58.032] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,"
[ 58.038] (II) config/udev: Adding input device HDA ATI SB Mic (/dev/input/event8)
[ 58.038] (II) No input driver/identifier specified (ignoring)
[ 58.039] (II) config/udev: Adding input device HDA ATI SB Headphone (/dev/input/event9)
[ 58.039] (II) No input driver/identifier specified (ignoring)
[ 58.042] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 58.042] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 58.042] (**) AT Translated Set 2 keyboard: Applying InputClass "system-setup-keyboard"
[ 58.042] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 58.042] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 58.042] (**) AT Translated Set 2 keyboard: always reports core events
[ 58.042] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[ 58.042] (--) AT Translated Set 2 keyboard: Found keys
[ 58.042] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 58.042] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 58.042] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 58.042] (**) Option "xkb_rules" "evdev"
[ 58.042] (**) Option "xkb_model" "pc105+inet"
[ 58.042] (**) Option "xkb_layout" "us"
[ 58.043] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,"
[ 58.044] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event5)
[ 58.044] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 58.044] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 58.044] (II) LoadModule: "synaptics"
[ 58.044] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[ 58.056] (II) Module synaptics: vendor="X.Org Foundation"
[ 58.056] compiled for 1.10.0, module version = 1.4.0
[ 58.056] Module class: X.Org XInput Driver
[ 58.056] ABI class: X.Org XInput driver, version 12.2
[ 58.056] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 58.056] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[ 58.056] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 58.056] (**) Option "Device" "/dev/input/event5"
[ 58.056] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888
[ 58.056] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5012
[ 58.057] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 58.057] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 58.057] (--) SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 58.057] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 58.057] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 58.057] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input5/event5"
[ 58.057] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 58.057] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 58.057] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 58.057] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.035
[ 58.058] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 58.058] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 58.058] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 58.058] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 58.058] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 58.058] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 58.059] (II) No input driver/identifier specified (ignoring)
[ 154.384] (II) RADEON(0): EDID vendor "AUO", prod id 8284
[ 154.384] (II) RADEON(0): Printing DDC gathered Modelines:
[ 154.384] (II) RADEON(0): Modeline "1366x768"x0.0 72.00 1366 1414 1446 1494 768 771 777 803 -hsync -vsync (48.2 kHz)
[ 154.522] (II) RADEON(0): EDID vendor "AUO", prod id 8284
[ 154.522] (II) RADEON(0): Printing DDC gathered Modelines:
[ 154.522] (II) RADEON(0): Modeline "1366x768"x0.0 72.00 1366 1414 1446 1494 768 771 777 803 -hsync -vsync (48.2 kHz)
--
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxxx
https://admin.fedoraproject.org/mailman/listinfo/devel
