On 04/04/2011 10:55 AM, Przemek Klosowski wrote:
Haven't tried live cd - don't have a dvd/cd drive on the box. Plenty of room in the /bootOn 04/03/2011 06:04 PM, Steve Clark wrote:I am trying to use preupgrade a fedora 13 system to fedora 14. When I reboot the system just hangs. The hardware is a Jetway MB with an intel D510 cpu and 2 GB of memory sata drive. All I see on reboot is a blinking cursor in the upper left corner of the screen. I have to ctl-alt-del to get out of the hang.It looks like it stopped booting, so either your boot environment got damaged or the F14 kernel fails on your machine. Does the Fedora 14 Live CD boot successfully for you? Do you have enough space in the /boot partition? Can you boot the Live CD, spacebar into the grub menu and try booting off the local hard disk? partition. /dev/sda1 485M 246M 214M 54% /boot Grub comes up of the hard disk just fine. If I select thetitle Upgrade to Fedora 14 (Laughlin) kernel /boot/upgrade/vmlinuz preupgrade repo=hd::/var/cache/yum/preupgrade ks=hd:/dev/sda1/upgrade/ks.cfg stage2=hd:/dev/sda1/upgrade/install.img initrd /boot/upgrade/initrd.img I just get a flashing cursor in the top left corner of the screen. I can then ctl-alt-del and select the f13 kernel from grub and the system will boot back into f13. lspci 00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge (rev 02) 00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller (rev 02) 00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller (rev 02) 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02) 00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02) 00:1d.0 USB Controller: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation N10/ICH7 Family SATA AHCI Controller (rev 02) 00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02) 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 02:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 02:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) I was hoping maybe there were some options I could add to the kernel line to make it boot. --
Stephen Clark NetWolves Sr. Software Engineer III Phone: 813-579-3200 Fax: 813-882-0209 Email: steve.clark@xxxxxxxxxxxxx http://www.netwolves.com |
-- devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/devel
